All Products (8786)

MR DJ 10 feet DMX105 5-pin 5-conductor XLR Male to Female DMX lighting cable Wire 10' MR DJ DMX105 cable 5-pin DMX Cable is designed for connecting DMX controllers, DMX lights, and other 5-pin DMX devices into a stage lighting or effect system for live performance applications. The cables are constructed of 22 AWG stranded tinned copper conductors insulated by polyethylene within a PVC jacket. DMX cables are what we use for lighting. The cables' purpose is not about carrying an audio signal, it is carrying information or data that will communicate changes between lights and the source. General Features: Connectors: XLR5M to XLR5F For Connecting DMX Lights and Effects Stranded Tinned Copper Conductors PVC Jacket Impedance: 110-ohm Conductors: 2 OFC Connector 1: 5-Pin DMX XLR Male Connector 2: 5-Pin DMX XLR Female Length: 10’ Material: PVC Type: Digital Cable Gauge: 22 Gauge Stranded High Quality 5 Pin Male to Female Stage Light Cable for DMX Signal Transmission Designed for Accurate Transmission of Digital Audio and DMX Lighting Control Data Safety, Shielding, and Prevent Transmission Interferences ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

MR Truss CDMX10 5-pin DMX lighting cable 10' DMX 5-Pin XLR Male to Female Pro Stage DJ Lighting DMX Cable The 10' MR Truss CDMX10 5-pin DMX Cable is designed to connect DMX controllers, DMX lights, and other 5-pin DMX devices to stage lighting or effect systems for live performance applications. The cables are constructed of 22 AWG-stranded tinned copper conductors insulated by polyethylene within a PVC jacket. We use DMX cables for lighting. A cable does not carry an audio signal; it carries information or data communicating changes between lights and the source.  General Features: Connectors: XLR5M to XLR5F 5-Pin Male to Female DMX connections For Connecting DMX Lights and Effects Stranded Tinned Copper Conductors High-quality, rugged metal connectors Flexible Construction PVC Jacket Impedance: 110-ohm Conductors: 2 OFC Connector 1: 5-Pin DMX XLR Male Connector 2: 5-Pin DMX XLR Female Length: 10’ Material: PVC Type: Digital Cable Gauge: 22 Gauge Stranded High Quality 5 Pin Male to Female Stage Light Cable for DMX Signal Transmission Designed for Accurate Transmission of Digital Audio and DMX Lighting Control Data Safety, Shielding, and Prevent Transmission Interferences Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SWT-12S4 1500W Max Single 12" Bass Reflex Sealed Subwoofer Tube Enclosure With 1500W peak power handling, this ready-to-use bass reflex subwoofer tube is just for big bass fans. A protective grille ensures that nothing sliding around in the trunk damages the woofer. General Features: 12" 4 ohm Bass Reflex Series Subwoofer 1500 Watts Peak Power Handling 300 Watts RMS Power Handling Heavy-Duty Subwoofer Grill Stitched Alpine Logo Carpeted Exterior Push SPK Terminal Installation Brackets and Belts Included Frequency Response: 28 - 200 Hz Sensitivity: 92 dB Speaker Impedance: 4 Ω Enclosure Dimensions: 12.75"W x 26" D Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 12" Passive Subwoofer Push SPK Terminal Voice coil size/type Sensitivity: 92dB Enclosure Features: Tube enclosure Black Carpet Finish with White Alpine Logo Grille included Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-W8D2 900W Max (300W RMS) 8" S-Series Dual 2 Ohm Car Subwoofers ADD BASS TO PRACTICALLY ANY VEHICLE Don’t think you have room for a subwoofer? Think again. The new S-W8D2 and S-W8D2 8” S-Series subwoofers have a shallow mounting depth of just 3-3/4” and can be used in a sealed box enclosure as small as .15 cubic feet. It is perfect for under seats, behind rear bench seats in trucks, or even in some door applications. General Features: 8" 2 Ohm S-Series Subwoofer Power Handling: Peak: 900 watts RMS: 300 watts Recommended power range: 150 - 300 RMS Kevlar Reinforced Pulp Cone HAMR Santoprene Rubber Surround High Strength Steel Frame Basket Concealed Mount Gasket High Strength Steel Frame Basket 10 AWG Push Terminals High Excursion Underhung Voice Coil Configuration High-Grade Strontium Ferrite Magnet Top-mount depth: 3-3/4" Cutout diameter: 6-7/8" Frequency Response: 34 - 200 Hz Sensitivity: 83dB Resonance Frequency (Fs): 48 Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the box: Two 8" Dual 2-ohm voice coil subwoofer 1 Rubber concealing ring (installed) Two 3" jumper cables (each has a single banana connector on each end) Subwoofer Application Guide (English/ French) Online product registration information (English/ French/ Spanish) Warranty information (English/ French) Important Notice! (English/ French) Alpine S-W8D2 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier A TOUGH MINI AMP THAT PACKS A PUNCH Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack will surely deliver powerful bass output for subwoofers in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags. A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT The KTA-30MW is perfect for when you want to add subwoofer power but don’t have space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice. HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue. General Features: Alpine KTA-30MW Class D Monoblock Weather Resistant Power Pack Amplifier 300 Watts RMS X 1 @ 4 Ohms Power Handling 600 Watts RMS X 1 @ 2 Ohms Power Handling CTA-2006 compliant Frequency Response: 20-400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 83dB Variable Low Pass filter 50-400Hz @ -24dB/Oct. Variable Bass Boost (0-12 dB at 50 Hz) Fuse Rating: 25A Weather-resistant (IP66 rating) Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to adapt to musical needs automatically Dimensions: 7” W x 3.5” H x 1.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the box: Mono amplifier 14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends) 4 Self-tapping screws (Length 3/4") Connection sheet Limited Warranty sheet Alpine KTA-30MW owner's manual Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier A TOUGH MINI AMP THAT PACKS A PUNCH Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags. A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT The KTA-30MW is perfect for when you want to add subwoofer power but don’t have space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice. HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue. General Features: Alpine KTA-30MW Class D Monoblock Weather Resistant Power Pack Amplifier 300 Watts RMS X 1 @ 4 Ohms Power Handling 600 Watts RMS X 1 @ 2 Ohms Power Handling CTA-2006 compliant Frequency Response: 20-400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 83dB Variable Low Pass filter 50-400Hz @ -24dB/Oct. Variable Bass Boost (0-12 dB at 50 Hz) Fuse Rating: 25A Weather-resistant (IP66 rating) Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs Dimensions: 7” W x 3.5” H x 1.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the box: Mono amplifier 14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends) 4 Self-tapping screws (Length 3/4") Connection sheet Limited Warranty sheet Alpine KTA-30MW owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine PSS-22WRA Jeep Wrangler JK Unlimited Weather Resistant Upgrade SPV-65X-WRA x 2, KTA-30F-WRA, KTA-30M-WRA, SBV-10-WRA Good times in your Wrangler Unlimited are about to get better. Alpine's Restyle PSS-22WRA speaker system takes the guesswork out of installation with nine direct-fit speakers and power sources perfectly suited for your Jeep Wrangler JK Unlimited (not compatible with premium sound systems). Alpine has also designed this weather-proof system to endure the environmental harshness of life in your Jeep, even when the top is off. Get ready to rock the great outdoors.The soundAlpine supplies everything you need to revitalize the sound in your Wrangler. You'll get two 6-1/2" component systems with 1" dome tweeters for the front and soundbar locations in your Jeep. Alpine lets you convert these components to a coaxial design if called for in your JK Unlimited. The included weather-resistant Tough Pack 4-channel amp ups your power for awesome clarity at all volumes — a must for top-down drivers. Alpine also gives you a 10" enclosed under-seat subwoofer and a Tough Pack mono amp for some whoppin' bass. The fitAlpine designed the Restyle line for drivers who want to improve their sound but want to maintain the factory look of their vehicle. The PSS-22WRA sound system upholds this approach by including tweeter mounting gear suitable for a variety of locations. The woofers fit directly into your factory locations and in the case of the two amps, all wiring is included, complete with factory compatible plugs. Once the PSS-22WRA system goes in, you won't even know it's there... until you crank up the volume.READ LESSProduct highlights:compatible with select 2011-18 Jeep Wrangler JK Unlimited models (not compatible with premium sound systems)package includes:two sets of SPV-65X-WRA 6-1/2" component speakersweather-resistant Tough Pack KTA-30F-WRA 4-channel amplifierweather-resistant Tough Pack KTA-30M-WRA mono amplifier with the remote bass knobSBV-10-WRA 10" enclosed submounting gear, wiring, and connectorsincluded SPV-65X-WRA speakers can be configured for component or coaxial use General Features: Alpine PSS-22WRA Audio Restyle for Jeep Wrangler Unlimited JK Includes speakers, tweeters, a powered subwoofer, and two amplifiers Fully Waterproof Plug-and-Play Package Specifically designed for 2007-2018 four-door Jeep Wrangler Unlimited Vehicles Authorized Internet Dealer compatible with select 2011-18 Jeep Wrangler JK Unlimited models (not compatible with premium sound systems) package includes: two sets of SPV-65X-WRA 6-1/2" component speakers weather-resistant Tough Pack KTA-30F-WRA 4-channel amplifier weather-resistant Tough Pack KTA-30M-WRA mono amplifier with the remote bass knob SBV-10-WRA 10" enclosed sub mounting gear, wiring, and connectors included SPV-65X-WRA speakers can be configured for component or coaxial use What's in the box: SPV-65X-WRA x 2, KTA-30F-WRA, KTA-30M-WRA, SBV-10-WRA ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine SWT-12S4 12" Bass Reflex Sub Bass Tube Alpine BBX-T600 Amplifier Absolute KIT4 4G Amp Kit This bundle includes an Alpine BBX-T600 Amplifier, an Alpine SWT-12S4 12" Bass Tube, & Absolute KIT4 4G Amp wiring kit. Alpine SWT-12S4 1500W Max Single 12" Bass Reflex Sealed Subwoofer Tube Enclosure With 1500W peak power handling, this ready-to-use bass reflex subwoofer tube is just for big bass fans. A protective grille ensures that nothing sliding around in the trunk damages the woofer. General Features: 12" 4 ohm Bass Reflex Series Subwoofer 1500 Watts Peak Power Handling 300 Watts RMS Power Handling Heavy-Duty Subwoofer Grill Stitched Alpine Logo Carpeted Exterior Push SPK Terminal Installation Brackets and Belts Included Frequency Response: 28 - 200 Hz Sensitivity: 92 dB Speaker Impedance: 4 Ω Enclosure Dimensions: 12.75"W x 26" D Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 12" Passive Subwoofer Push SPK Terminal Voice coil size/type Sensitivity: 92dB Enclosure Features: Tube enclosure Black Carpet Finish with White Alpine Logo Grille included Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier This new BBX amplifier gives you Alpine power performance at a fantastic price. It is designed to fit easily in virtually any system. This amp delivers high-output power and exceptional performance for its class. It is a great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. Performance with Bass EQ allows you to maximize the performance of your system and get even more powerful bass. General Features: Alpine BBX-T600 Class-A/B 2-ohm Stable 2-Channel Amplifier 50 Watts @ 4 Ohm x 2 Channel 70 Watts @ 2 Ohm x 2 Channel 130 Watts @ 4 Ohm x 1 Channel Bridged Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on Two or Mono channel operation One pair of preamp outputs to connect multiple amplifiers 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 95dB Variable high-pass filter: 80 - 1200 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 20A x 1 Dimensions: 9.84"W x 9.44"L x 2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine HCE-C1100 Universal backup camera surface-mount Back up betterAlpine's HCE-C1100 backup camera is an excellent add-on when buying a new touchscreen car stereo. With low light capability and a wide viewing angle, you'll have a perfect picture of what's behind your vehicle, day or night.This tiny camera measures less than one square inch, so it'll fit almost anywhere. The package includes a 21-foot cable with composite video RCA plugs that allow the camera to connect to any in-dash receiver or front-mount screen with a composite video input.Frame itGeneral Features: backup camera with standard composite (RCA) video cable mounting hardware and 21-foot power/video cable included compatible with any radio with an RCA video input (most aftermarket models, only a few factories) 1/4" CMOS image sensor color video output illumination range: 1.5 to 100,000 lux weather-proof camera housing warranty: 1 year MFR # HCE-C1100 What's in the HCE-C1100 package: HCE-C1100 owner's manual Rearview camera (attached 5' power/ground cable) 23' Composite video cable Mounting bracket Hex-key Rubber sleeve 4 Large screws 2 Small screws Owner's Manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SWT-12S4 1500W Max Single 12" Bass Reflex Sealed Subwoofer Tube Enclosure With 1500W peak power handling, this ready-to-use bass reflex subwoofer tube is just for big bass fans. A protective grille ensures that nothing sliding around in the trunk damages the woofer. General Features: 12" 4 ohm Bass Reflex Series Subwoofer 1500 Watts Peak Power Handling 300 Watts RMS Power Handling Heavy-Duty Subwoofer Grill Stitched Alpine Logo Carpeted Exterior Push SPK Terminal Installation Brackets and Belts Included Frequency Response: 28 - 200 Hz Sensitivity: 92 dB Speaker Impedance: 4 Ω Enclosure Dimensions: 12.75"W x 26" D Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 12" Passive Subwoofer Push SPK Terminal Voice coil size/type Sensitivity: 92dB Enclosure Features: Tube enclosure Black Carpet Finish with White Alpine Logo Grille included Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.