00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream
Soundstream AR1-3000D Arachnid Series Monoblock Class D Car Stereo Subwoofer
$129.99
$209.98
Soundstream AR1-3000D Arachnid Series Monoblock Class D Car Stereo Subwoofer
Arachnid Amplifiers are the next step in performance and value. Taking advantage of our tried and true Class A/B Full Range and Improved Efficient Class-D Monoblock available platforms. Arachnid Series continues down the road of reliability and longevity you expect from us. Boosting a small electrical audio signal to a much higher voltage capable of driving speakers and subwoofers. Most vehicles’ standard systems can’t offer this high-power output that pushes your audio system to high volumes and precision like the Arachnid Series Amplifiers can.
General Features:
3,000W Monoblock Class D Arachnid Series Car Amplifier with Bass Remote
Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
Military Grade SMT PCB Maintains Dynamic Performance
Direct Short, Thermal, & Overload Circuits Protect Amplifier
200mV-6V Low Level/RCA Input w/ Bridged Operation Outputs
Barrier Strip Wire Terminals, 4g Power & 8g Speaker Outputs
Variable 12dB High Pass, Low Pass, & Subsonic Crossovers
12dB Bass Boost Increases Low Octave Harmonics
Dash Mount Gain Control Module Included
MAX Power: 3,000w
RMS Power 4Ω: 350 x 1
RMS Power 2Ω: 600 x 1
RMS Power 1Ω/4Ω Bridged: 1,000x 1 (1Ω)
Remote Gain Control: Included
Dimensions: 8.75” D x 2.25” H 12.25” W
3-Year Warranty Manufacture Warranty
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cerwin Vega Mobile
Cerwin Vega B52 1000W Peak Stealth Bomber Series 2-Channel Class D Amplifier
$209.99
$419.99
Cerwin Vega B52 1000W Peak Stealth Bomber Series 2-Channel Class D Amplifier
General Features:
2-Channel Bomber Series Class D Amplifier
RMS Power Rating:
4 ohms: 200 watts x 2 chan.
2 ohms: 250 watts x 2 chan.
Bridged, 4 ohms: 500 watts x 1 chan.
Peak power output: 1000 watts
Class D IR Chipset with DirectFET Power Mosfet Output
Wired remote bass level control included
LED power and protection indicators
Two or Mono channel operation
Speaker-level (high-level) inputs
Ultra Compact High-Density Aluminum Alloy Chassis
3-way protection circuitry (thermal, overload, and short speaker protection)
Selectable turn-On modes: REM / DC / VOX
Input sensitivity: 200 mV - 10 V
Frequency Response: 10 - 33,000 Hz
Total Harmonic Distortion (THD): 0.25%
Signal to Noise Ration: 101.7 dBa
Selectable crossover mode: HP / Flat / LP
Variable low/high-pass filter: 40 - 400 Hz
Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
Dimensions: 4.02"W x 6.61"L x 1.40"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine S-A60M 600W S-Series Monoblock Class-D Amplifier
$219.95
$280.00
Alpine S-A60M S-Series Monoblock Class-D Amplifier 600W RMSThe Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers.S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.General Features:
Alpine S-Series Mono Power Amplifier - S-A60M
RMS Power Output:
400W x 1 @ 4 Ohms (14.4V < 1% THD+N)
600W x 1 @ 2 Ohms (14.4V < 1% THD+N)
S/N ratio: >85dB (ref: 1W into 4 ohms), >105dB (ref: rated power into 4 ohms)
Remote bass knob compatible (requires RUX-KNOB.2, sold separately)
CTA-2006 compliant
THD+N ≤ 0.03% (ref 1W info 4 ohm)
Frequency Response: 10HZ-400Hz (+/- 3 dB)
Damping Factor: > 1000
variable low-pass filter (50-400 Hz, 24 dB/octave)
variable bass boost (0-12 dB at 50 Hz)
Speaker-level inputs (Speaker Wire to RCA Adapter Required)
Preamp Inputs
Improved heat sink and protection circuit design that eliminates thermal shut-down for dependable music playback
Remote Sensing automatic turn-on when using speaker-level inputs
Approximate Weight: 11 lbs
Fuse Rating: fuse rating: 30A x 2
Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select from our website when purchased together with this amplifier. Dimensions: 8” W x 8” H x 2.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What's in the S-A60M package:
S-A60M owner's manual
Mono subwoofer amplifier
Two 30-amp ATO fuses (installed)
Four 3/4" Screws
2mm Allen wrench
Owner's manual
Alpine Verification Certificate
Online product registration information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream
Soundstream ST4.1200D Stealth 1200W 4Channel Class D Motorcycle Car Audio Amplifier
$138.99
$269.98
Soundstream ST4.1200D Stealth Series 1200W Channel Class D Motorcycle Car Audio Boats, ATVs, Side-by-Sides, Golf carts Amplifier
Don’t let these little monsters fool you. The latest and greatest of class D full-range technology allows us to pack 10 pounds of KICK YOUR ASS in less than 2-pound chassis. Once regarded as “dirty power”, class D's stable performance, thanks to high power capability, maximum efficiencies, and low tolerance components, rivals traditional full-range applications. Minimal power requirements, ultra-micro footprint, unbelievable sound quality, and easy installation make Stealth amplifiers great for any car, motorcycle, boat, or off-road vehicle…
Using an Original or Factory Radio? No Problem, this amplifier is equipped with an Automatic Hi-Level Signal Sensing Turn-On. No need to run a remote wire to turn it on, this amplifier will detect the signal and turn it on and off automatically. (Hi-Level Input only)
General Features:
Total power output: 1,200watts
2-Ohms: 150 Watts x 4 channels
4-Ohms: 100 Watts x 4 channels
4-Ohms/Bridged: 300 Watts x 2 channels
High-Efficiency Class D Full-Range Amplifiers
Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
2-ohm Stereo & 4-ohm Bridged Full-Range Operation
MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
Military Grade SMT PCB Maintains Dynamic Performance
Direct Short, Thermal, & Overload Circuits Protect Amplifier
200mV-12V High-Level or Low-Level RCA Input
Automatic Turn-On Hi-Level Signal Sensing
Quick Disconnect RCA/High-Level Wire Harness
Quick Disconnect Power and Speaker Output Harness
Variable 12dB High Pass, Low Pass, & Subsonic Crossovers
Amplifier Dimensions 3″W x 1.5″H x 7.75″W
Weight: 1.90lbs
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream
Soundstream TXP1.12000D 12,000 Watt Mono Amplifier 1-Ohm Car Stereo Amp
$259.99
$499.99
Soundstream TXP1.12000D 12,000 Watt Mono Amplifier 1-Ohm Car Stereo Amp
To beat the competition & be the loudest on the streets, you have to think smarter, buy smarter, & build smarter. To help you become that guy, Soundstream’s proud to introduce Tarantula XTREME POWER amplifiers. New to the Soundstream arsenal in Fall 2020, these robust Class D amplifiers produce massive power beyond your wildest dreams. Don’t let their size fool you, though; they pack a HUGE punch. Superefficient silicon steel core power supply transformers deliver high-current power on demand. While traditional toroidal transformers are compact & deliver clean, uncolored power for premium sound, silicon steel alloy core transformers pass far more current more efficiently. What does this mean for you? More power to your subwoofers & speakers without needing a truckload of batteries & industrial-size power wiring… Mind blown!
General Features:
Tarantula Series Class D 1 ohms Stable Monoblock Amplifier
RMS Power Rating: 4 ohms: 1,300 watts x 1 channel
RMS Power Rating: 2 ohms: 2,300 watts x 1 channel
RMS Power Rating: 1 ohm: 4,300 watts x 1 channel
Total RMS power output: 4,300 watts
Silicone Steel Alloy Core Power Supply Transformers & Flux Capacitors
Military Grade SMT PCB Maintains Dynamic Performance
LED Accent Lighting Illuminates Circuit Board
Wired remote bass level control included
Soft start turn-on
Direct Short, Thermal, & Overload Circuits Protect Amplifier
Input sensitivity: Low level: 200 - 6 volts
Frequency Response: 20 - 20,000 Hz
Total Harmonic Distortion (THD): 0.3%
Signal Noise Ratio: 105 dB
Variable low-pass filter: 80 - 20,000 Hz
Variable Bass Boost: 0 - 12 dB
8 AWG gauge power and ground wiring are recommended for installation.
Dimensions: 8.25" W x 7.25" L x 2.75" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
ALPINE KTA-450 400w 4-Channel Car Amplifier
$219.95
$350.00
Alpine KTA-450 4-Channel 200 Watt RMS Power Pack Amplifier Dynamic Peak Power (DPP) Technology
The KTA-450 features Alpine’s exclusive DPP technology which intelligently adjusts the gain to automatically adapt to musical needs. DPP prevents the amplifier from clipping music signals by supplying up to double the power to support rhythmic instruments that provide snappy sounds (like a snare drum, trumpet, or high-hat cymbals). During these dynamic musical passages, DPP instantly delivers bursts of power to rise to the peak demands of the music. The DPP technology boosts the KTA-450’s performance to 400 watts DPP, essentially doubling the amplifier’s power without increasing its size. Other Power Pack Amplifiers with the DPP technology are the KTA-30FW and KTA-30MW.
General Features:
Alpine KTA-450
Class D 4-channel Weather Resistant Power Pack Amplifier
CES 2019 Innovation Award Winner in the In-Vehicle Audio/Video category
Power Handling
50W RMS x 4 @ 4 Ohms
45W RMS x 4 @ 2 Ohms
Total Power Handling: 200W RMS
CTA-2006 compliant
Frequency Response: 15-50 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 83dB
Selectable high-pass filters (60, 80, 120 Hz at 12 dB/octave) on front and rear channels
Fuse Rating: 15A
Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs
Dimensions: 7” W x 3.5” H x 1.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the KTA-450 Package:
KTA-450 Package owner's manual
4-Channel amplifier
Wiring harness
Mounting plate
2 Mounting brackets
4 Wire-ties
4 Hex-head machine screws
2 Pan-head machine screws
4 Pan-head self-tapping screws
Warranty Information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate
Rockford Fosgate Prime R1200-1D Prime 1200 RMS Watts Monoblock Mono Amp 1 Channels D
$409.99
$679.99
Rockford Fosgate Prime R1200-1D 1200W RMS Prime Series Class-D Monoblock 1-Ohm Stable Amplifier
The PRIME R1200-1D is an ultra-efficient mono amplifier for cars and trucks that can produce 1,200 Watts into a 1-Ohm load without taxing the electrical system. The frequency response of the R1200-1D is optimized exclusively for use with subwoofers. The Prime R1200-1D subwoofer amplifier offers high efficiency through the implementation of its Class-D circuitry while delivering rich, full bass to any system. This car amplifier is optimized for subwoofers with the implementation of an infrasonic filter to keep those ultra-low (inaudible) bass notes from damaging your subwoofer system. Match with a 4-channel stereo amplifier for your mids/highs and you'll have a Rockford Fosgate system that any Car Audio Fanatic will envy.
General Features:
Rockford Fosgate Prime Series R1200-1D
Class-D 1-Ohm Stable Monoblock Amplifier
RMS Power Rating: 4 ohms: 400 watts x 1 channel
RMS Power Rating: 2 ohms: 800 watts x 1 channel
RMS Power Rating: 1 ohm: 1200 watts x 1 channel
CEA-2006 Compliant Amplifier
Pulse Width Modulated MOSFET power supply
Wired remote bass level control included
LED power (green) and protect (red) indicators
Soft start turn-on
Nickel-plated RCA level inputs
Nickel-plated screw terminals
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Heavy-duty aluminum alloy heat-sink for extreme heat dissipation
Input sensitivity: 150mV - 4V
Frequency Response: 20 - 250Hz
Total Harmonic Distortion (THD): <1.0%
Signal to Noise Ratio: 100dB
Variable low-pass filter: 50 - 250 Hz, 12 dB/octave
Subsonic (infrasonic) filter: 15 - 40 Hz , 12 dB/octave
Variable Bass Boost: 0 to +18 dB bass boost at 45 Hz
Fuse Rating: 150A x 1 (recommended, not included)
12 AWG speaker wire gauge outputs
4 gauge power and ground wiring is recommended for installation
Weight: 7.825 lbs
Dimensions: 11.06"W x 6.77"L x 1.97"H
Also Found As Prime 1200 Watt, R12001D, R1200, R12001
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine S2-A36F 600W Class-D 4-Channel Car Amplifier &2 Pair S2-S65 6.5" Coaxial Speakers & KIT10 Installation AMP Kit
$417.85
$700.00
Alpine S2-A36F 600W Class-D 4-Channel Car Amplifier & 2 Pair Alpine S2-S65 6.5" 480 Watts S-Series Hi-Res Certified 2Way Coaxial Car Speakers & Absolute KIT10 10 Gauge / 800 Watt Complete Amplifier Hookup Installation Kit Bundle
Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier
The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.
General Features:
Hi-Res Audio Certified (Up to 40kHz)
Power Rating: 14.4V, < 0.3% THD +N
Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω
Bridged Power: 180W RMS x 2 @ 4Ω
4-Channel Amplifier
Alpine’s Class D Amplifier Circuit
Two-sided terminal layout
Built-in Selectable/ Adjustable Crossovers
Mid-Bass EQ Input for more power
Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)
Dimensions: 8.7” W x 2.25” H x 8.25” D
Weight: 4 lbs, 13 oz
S/N Ratio: >83dB
Frequency Response: 20Hz – 40kHz
Damping Factor: >100
Owner’s Manual
4 Self-tapping screws
Hexagon wrench
Alpine S2-S65 6.5" 480 Watts S-Series Hi-Res Certified 2Way Coaxial Car Speakers
Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S65 6.5” Coaxial Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers resulting in a more accurate and natural sound at an entry-level price point. Crafted with a unique combination of Poly Propylene, Glass Fiber, and Mica Cone materials, the S2-S65 is designed for lightweight construction, high output, and low distortion, giving you a clean and accurate audio experience.
General Features:
6-1/2" 2-way Coaxial Car Speakers
Peak Power Handling: 480 watts per pair / 240 watts each
Power Handling RMS: 160 watts per pair / 80 watts each
Polypropylene cone material
Rubber speaker surround
High Amplitude Multi-Roll surround technology
HI-RES Certified
Optional Grills KTE-S65G available
1" Silk Dome Tweeters
Ferrite magnet motor structure
Top-mount Depth: 2-5/16"
Cutout Dimensions: 5-1/8"
Impedance: 4 ohms
Frequency Response: 55 - 40000 Hz
Sensitivity: 88 dB
Authorized Internet Dealer
MFR #: S2-S65
1-year Manufacturer's Warranty
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine S2-A36F 600W Class-D 4-Channel Car Amplifier &2 Pair S2-S65 6.5" Coaxial Speakers
$407.85
$700.00
Alpine S2-A36F 600W Class-D 4-Channel Car Amplifier & 2 Pair Alpine S2-S65 6.5" 480 Watts S-Series Hi-Res Certified 2Way Coaxial Car Speakers
Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier
The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.
General Features:
Hi-Res Audio Certified (Up to 40kHz)
Power Rating: 14.4V, < 0.3% THD +N
Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω
Bridged Power: 180W RMS x 2 @ 4Ω
4-Channel Amplifier
Alpine’s Class D Amplifier Circuit
Two-sided terminal layout
Built-in Selectable/ Adjustable Crossovers
Mid-Bass EQ Input for more power
Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)
Dimensions: 8.7” W x 2.25” H x 8.25” D
Weight: 4 lbs, 13 oz
S/N Ratio: >83dB
Frequency Response: 20Hz – 40kHz
Damping Factor: >100
Owner’s Manual
4 Self-tapping screws
Hexagon wrench
Alpine S2-S65 6.5" 480 Watts S-Series Hi-Res Certified 2Way Coaxial Car Speakers
Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S65 6.5” Coaxial Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers resulting in a more accurate and natural sound at an entry-level price point. Crafted with a unique combination of Poly Propylene, Glass Fiber, and Mica Cone materials, the S2-S65 is designed for lightweight construction, high output, and low distortion, giving you a clean and accurate audio experience.
General Features:
6-1/2" 2-way Coaxial Car Speakers
Peak Power Handling: 480 watts per pair / 240 watts each
Power Handling RMS: 160 watts per pair / 80 watts each
Polypropylene cone material
Rubber speaker surround
High Amplitude Multi-Roll surround technology
HI-RES Certified
Optional Grills KTE-S65G available
1" Silk Dome Tweeters
Ferrite magnet motor structure
Top-mount Depth: 2-5/16"
Cutout Dimensions: 5-1/8"
Impedance: 4 ohms
Frequency Response: 55 - 40000 Hz
Sensitivity: 88 dB
Authorized Internet Dealer
MFR #: S2-S65
1-year Manufacturer's Warranty
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine S2-A36F 600W 4-Channel Car Amplifier & S2-S65 6.5" Coaxial Speakers & KIT10 Installation AMP Kit
$313.90
$500.00
Alpine S2-A36F 600W Class-D 4-Channel Car Amplifier & Alpine S2-S65 6.5" 480 Watts S-Series Hi-Res Certified 2Way Coaxial Car Speakers & Absolute KIT10 10 Gauge / 800 Watt Complete Amplifier Hookup Installation Kit Bundle
Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier
The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.
General Features:
Hi-Res Audio Certified (Up to 40kHz)
Power Rating: 14.4V, < 0.3% THD +N
Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω
Bridged Power: 180W RMS x 2 @ 4Ω
4-Channel Amplifier
Alpine’s Class D Amplifier Circuit
Two-sided terminal layout
Built-in Selectable/ Adjustable Crossovers
Mid-Bass EQ Input for more power
Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)
Dimensions: 8.7” W x 2.25” H x 8.25” D
Weight: 4 lbs, 13 oz
S/N Ratio: >83dB
Frequency Response: 20Hz – 40kHz
Damping Factor: >100
Owner’s Manual
4 Self-tapping screws
Hexagon wrench
Alpine S2-S65 6.5" 480 Watts S-Series Hi-Res Certified 2Way Coaxial Car Speakers
Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S65 6.5” Coaxial Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers resulting in a more accurate and natural sound at an entry-level price point. Crafted with a unique combination of Poly Propylene, Glass Fiber, and Mica Cone materials, the S2-S65 is designed for lightweight construction, high output, and low distortion, giving you a clean and accurate audio experience.
General Features:
6-1/2" 2-way Coaxial Car Speakers
Peak Power Handling: 480 watts per pair / 240 watts each
Power Handling RMS: 160 watts per pair / 80 watts each
Polypropylene cone material
Rubber speaker surround
High Amplitude Multi-Roll surround technology
HI-RES Certified
Optional Grills KTE-S65G available
1" Silk Dome Tweeters
Ferrite magnet motor structure
Top-mount Depth: 2-5/16"
Cutout Dimensions: 5-1/8"
Impedance: 4 ohms
Frequency Response: 55 - 40000 Hz
Sensitivity: 88 dB
Authorized Internet Dealer
MFR #: S2-S65
1-year Manufacturer's Warranty
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine S2-A36F 600W Class-D 4-Channel Car Amplifier & S2-S65 6.5" Coaxial Speakers
$303.90
$500.00
Alpine S2-A36F 600W Class-D 4-Channel Car Amplifier & Alpine S2-S65 6.5" 480 Watts S-Series Hi-Res Certified 2Way Coaxial Car Speakers
Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier
The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.
General Features:
Hi-Res Audio Certified (Up to 40kHz)
Power Rating: 14.4V, < 0.3% THD +N
Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω
Bridged Power: 180W RMS x 2 @ 4Ω
4-Channel Amplifier
Alpine’s Class D Amplifier Circuit
Two-sided terminal layout
Built-in Selectable/ Adjustable Crossovers
Mid-Bass EQ Input for more power
Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)
Dimensions: 8.7” W x 2.25” H x 8.25” D
Weight: 4 lbs, 13 oz
S/N Ratio: >83dB
Frequency Response: 20Hz – 40kHz
Damping Factor: >100
Owner’s Manual
4 Self-tapping screws
Hexagon wrench
Alpine S2-S65 6.5" 480 Watts S-Series Hi-Res Certified 2Way Coaxial Car Speakers
Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S65 6.5” Coaxial Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers resulting in a more accurate and natural sound at an entry-level price point. Crafted with a unique combination of Poly Propylene, Glass Fiber, and Mica Cone materials, the S2-S65 is designed for lightweight construction, high output, and low distortion, giving you a clean and accurate audio experience.
General Features:
6-1/2" 2-way Coaxial Car Speakers
Peak Power Handling: 480 watts per pair / 240 watts each
Power Handling RMS: 160 watts per pair / 80 watts each
Polypropylene cone material
Rubber speaker surround
High Amplitude Multi-Roll surround technology
HI-RES Certified
Optional Grills KTE-S65G available
1" Silk Dome Tweeters
Ferrite magnet motor structure
Top-mount Depth: 2-5/16"
Cutout Dimensions: 5-1/8"
Impedance: 4 ohms
Frequency Response: 55 - 40000 Hz
Sensitivity: 88 dB
Authorized Internet Dealer
MFR #: S2-S65
1-year Manufacturer's Warranty
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine S2-A60M S-Series Class-D Mono Subwoofer Amplifier, Hi-Res Certified, 600W RMS at 1 & 2-Ohm
$199.95
$499.99
Alpine S2-A60M Next Generation S-Series Hi Res Class D 600 W Mono Subwoofer Amplifier
Alpine's S-Series S2-A60M 600W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 600W at a 1ohm or 2ohm drive, this mono amp can drive even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications. Plus, its compact design makes it easy to install in any vehicle.
General Features:
Class D 2 ohms Stable Monoblock Amplifier
RMS Power Rating @ 4 ohms: 330 watts x 1 channel
RMS Power Rating @ 2 ohms: 600 watts x 1 channel
Pulse Width Modulated MOSFET power supply
LED Power/Protect Light
Optional remote bass level control available for purchase Alpine RUX-KNOB.2
Soft start turn-on
Improved heat sink and protection circuit design
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Frequency Response: 10 - 400 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 85 dB
Variable low-pass filter: 50 - 400 Hz
Variable Bass Boost: 0 - 12 dB
Fuse Rating: 30A x 2
Dimensions: 8-1/16" W x 9-3/16" L x 2-5/16" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What's in the S2-A60M PACKAGE:
S2-A60M owner's manual
Mono subwoofer amplifier
2 End caps
Four 3/4" screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine S2-A55V S-Series 5-Channel 540 Watts Car Audio Amplifier & RUX-H01 Remote Bass Knob Bundle
$458.90
$800.00
Alpine S2-A55V S-Series Next Gen High-Resolution 5-Channel Car Audio Amplifier & RUX-H01 Remote Bass Knob Bundle
Alpine introduces the all-new S-Series amplifiers - a perfect match for the speakers. These amps have an excellent Watts-per-Euro ratio in the Class-D category, feature a very high heat resistance, and won’t shut down due to overheating. They also feature excellent sound quality in their price range.
General Features:
Class D 2 ohms Stable 5-Channel Amplifier
RMS Power Rating: 4 ohms: 40 watts x 4 channel + 200 watts x 1 channel
RMS Power Rating: 2 ohms: 60 watts x 4 channel + 300 watts x 1 channel
Bridged: 120 watts x 2 channel @ 4 ohms + 300 watts x 1 channel @ 2 ohms
Total power output: 540 watts
CEA-2006 Compliant Amplifier
LED Power/Protect Light
Includes preamp- and speaker-level (high-level) inputs
Wired remote bass level control included
3-way protection circuitry (thermal, overload, and speaker short protection)
Frequency Response: 10 - 30,000 Hz
Total Harmonic Distortion (THD): 1%
Signal Noise Ratio: 83 dB
Variable Bass Boost: 0 - 12 dB bass boost at 50 Hz
Fuse Rating: 60A
Enhanced Shutdown Performance technology
4 AWG gauge power and ground wiring are recommended for installation.
Dimensions: 13-1/4" W x 8-1/16" L x 2-5/16" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the S2-A55V package:
S2-A55V owner's manual
5-Channel amplifier
Two 30-amp ATO fuses
2 End caps
Four 3/4" Screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine S2-A55V S-Series 5-Channel 540 Watts Car Audio Amplifier & RUX-KNOB.2 Remote Bass Knob Bundle
$426.90
$800.00
Alpine S2-A55V S-Series Next Gen High-Resolution 5-Channel Car Audio Amplifier & RUX-KNOB.2 Remote Bass Knob Bundle
Alpine introduces the all-new S-Series amplifiers - a perfect match for the speakers. These amps have an excellent Watts-per-Euro ratio in the Class-D category, feature a very high heat resistance, and won’t shut down due to overheating. They also feature excellent sound quality in their price range.
General Features:
Class D 2 ohms Stable 5-Channel Amplifier
RMS Power Rating: 4 ohms: 40 watts x 4 channel + 200 watts x 1 channel
RMS Power Rating: 2 ohms: 60 watts x 4 channel + 300 watts x 1 channel
Bridged: 120 watts x 2 channel @ 4 ohms + 300 watts x 1 channel @ 2 ohms
Total power output: 540 watts
CEA-2006 Compliant Amplifier
LED Power/Protect Light
Includes preamp- and speaker-level (high-level) inputs
Wired remote bass level control included
3-way protection circuitry (thermal, overload, and speaker short protection)
Frequency Response: 10 - 30,000 Hz
Total Harmonic Distortion (THD): 1%
Signal Noise Ratio: 83 dB
Variable Bass Boost: 0 - 12 dB bass boost at 50 Hz
Fuse Rating: 60A
Enhanced Shutdown Performance technology
4 AWG gauge power and ground wiring are recommended for installation.
Dimensions: 13-1/4" W x 8-1/16" L x 2-5/16" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the S2-A55V package:
S2-A55V owner's manual
5-Channel amplifier
Two 30-amp ATO fuses
2 End caps
Four 3/4" Screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Absolute USA
Absolute USA KIT-4OR 2000 Watts Complete Amplifier Hookup Kit (Orange Color)
$34.99
$69.99
Absolute KIT4OR Complete PRO Marine 4 Gauge 2000 Watts Amplifier Complete Installation Amp Kit Power Wiring with orange Accent Color Scheme
Installing a car amplifier is already enough of a job without having to worry about where to find the right wire and installation accessories. We would recommend KIT4 for all DIY and installers. This wiring kit has an easy-to-install AGU fuse holder and some seriously good wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring highly flexible and installer-friendly. The speaker wire feels and works great and is much better than the typical 18-gauge wire most kits would include.
General Features:
Complete 4 Gauge Amplifier Kit
Designed specifically for car audio systems up to 1000 watts
Premium power and ground wire provide optimal power transfer
Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
Terminals are gold-plated for excellent signal transfer
For use in any car, truck, RV, or boat
Authorized Internet Dealer
1-year Manufacturer's warranty
Package Includes:
17 ft. of red 4 Gauge high current power cable
3 ft. of black 4 Gauge ground cable
15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire
20 ft. of 12 Gauge OFC Speaker cable
20 ft. of 16 Gauge remote turn-on wire
6 ft. of split loom tubing
1 Gold-plated 80 AMP AGU fuse
1 4 Gauge gold ring terminal
1 4 Gauge water-resistant inline fuse holder
2 Ring terminals
2 Spade terminals (4 gauge)
5 Spade terminals (14-16 gauge)
3 Self-tapping screws
1 Rubber grommet
20 Black cable ties
2 Butt connectors (18-22 gauge)
1 Butt connector (4 gauge)
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.