Wireless Microphones (159)

Xvive Audio U4R4 2.4 GHz Wireless In-Ear Monitor System with Four Receivers U4 In-Ear Monitor Wireless System U4R4 Four-pack U4 System     Wireless in-ear monitoring solution for four people—a whole band! (includes 4 receivers)     High-quality, ultra-compact wireless system for in-ear monitors     Audiophile 24-bit / 48 kHz sound with less than 5 ms of latency     Industry standard 2.4 GHz wireless technology     Reliable, solid RF connection over a range of 90 feet THE SYSTEM The system is comprised of a transmitter unit, which connects to your audio source (typically a mixer or sound interface); and a belt-pack receiver, to which you connect your earphones or headphones.LOUD AND CLEAR The U4 system features high-resolution, 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz, a signal-to-noise ratio of 107 decibels, and more volume than you’ll ever need. The sound is better than CD quality, and much, much better than MP3 quality!LONG, EASY CHARGE The internal battery in both the transmitter and the receiver lasts for 5 hours. The battery is easily charged using the included USB cable and any standard 5V USB charger, and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used. DIRECT COMMUNICATION If you have more than one U4 receiver, you can broadcast a signal to a whole group of people. This can be useful in situations where one person needs to communicate clearly and directly to a group—either in noisy environments or in situations where you don’t want to disturb others. This makes it an excellent option for things like group demos, presentations or tours.FREE AND EASY RECORDING For recording musicians, whether in a home or professional studio, going wireless makes the whole process so much freer and easier—especially if you’re playing or singing AND engineering at the same time!DISCREET PRACTICE If you want to practice guitar or bass privately—for example late at night—you can run your signal through a multi-effect unit or modeling amp, send either the ¼” or XLR output to your headphones or earphones, and move freely around your home! BAND ON THE RUN Your whole band—up to six musicians—can use the system together! There can be one monitor mix per transmitter, so if you have multiple U4 sets, you can customize monitor mixes for each band member. This is an easy, great-sounding and cost-effective monitoring solution for studio recording, rehearsals or live gigs. In rehearsal, this also means that there’s no need for PA speakers—so a band can practice in an apartment, or late at night. Specifications WIRELESS TYPE 2.4 GHz ISM worldwide open band BIT DEPTH/SAMPLE RATE 24-bit / 48 kHz SWITCHABLE CHANNELS 6 SIMULTANEOUS CHANNELS 6 FREQUENCY RESPONSE 20 Hz – 20 kHz (-3dB) DYNAMIC RANGE 107 dB (-3 dB) SIGNAL-TO-NOISE RATIO  107 dB STEREO/MONO Mono TOTAL HARMONIC DISTORTION 0.2% LATENCY 5 ms OPERATING RANGE 27.5 m / 90 ft (line-of-sight) TRANSMITTER      INCLUDED U4T CONNECTOR XLR or mono unbalanced 1/4” TS with supplied adapter DIMENSIONS 100 x 30 x 28 mm / 3.8" x 1.2" x 1.1" WEIGHT 90 g / 3.17 oz RECEIVER      INCLUDED     U4R HEADPHONE OUTPUT 3.5 mm / 1/8" DIMENSIONS     60 x 47 x 41 mm / 2.36" x 1.85" x 1.61" WEIGHT     118 g / 4.16 oz BATTERY      TYPE Rechargeable Lithium-ion (internal) BATTERY LIFE 5 hours CHARGING TIME 2.5 hrs (full charge) CHARGING VOLTAGE 5V (USB) USABLE WHILE CHARGING Yes Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U4T9 Complete System + T9 In-Ears U4 In-Ear Monitor Wireless System U4T9 Complete System + T9 In-Ears     U4 In-Ear Monitor Wireless System, plus T9 In-Ear Monitors     Complete IEM system for live performance and in-studio monitoring     Also includes a CU4 Carry Case   THE SYSTEM The system is comprised of a transmitter unit, which connects to your audio source (typically a mixer or sound interface); and a belt-pack receiver, to which you connect your earphones or headphones.LOUD AND CLEAR The U4 system features high-resolution, 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz, a signal-to-noise ratio of 107 decibels, and more volume than you’ll ever need. The sound is better than CD quality, and much, much better than MP3 quality!LONG, EASY CHARGE The internal battery in both the transmitter and the receiver lasts for 5 hours. The battery is easily charged using the included USB cable and any standard 5V USB charger, and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used. DIRECT COMMUNICATION If you have more than one U4 receiver, you can broadcast a signal to a whole group of people. This can be useful in situations where one person needs to communicate clearly and directly to a group—either in noisy environments or in situations where you don’t want to disturb others. This makes it an excellent option for things like group demos, presentations or tours.FREE AND EASY RECORDING For recording musicians, whether in a home or professional studio, going wireless makes the whole process so much freer and easier—especially if you’re playing or singing AND engineering at the same time!DISCREET PRACTICE If you want to practice guitar or bass privately—for example late at night—you can run your signal through a multi-effect unit or modeling amp, send either the ¼” or XLR output to your headphones or earphones, and move freely around your home! BAND ON THE RUN Your whole band—up to six musicians—can use the system together! There can be one monitor mix per transmitter, so if you have multiple U4 sets, you can customize monitor mixes for each band member. This is an easy, great-sounding and cost-effective monitoring solution for studio recording, rehearsals or live gigs. In rehearsal, this also means that there’s no need for PA speakers—so a band can practice in an apartment, or late at night. Specifications WIRELESS TYPE    2.4 GHz ISM worldwide open band BIT DEPTH/SAMPLE RATE    24-bit / 48 kHz SWITCHABLE CHANNELS    6 SIMULTANEOUS CHANNELS    6 FREQUENCY RESPONSE    20 Hz – 20 kHz (-3dB) DYNAMIC RANGE    107 dB (-3 dB) SIGNAL-TO-NOISE RATIO    107 dB STEREO/MONO    Mono TOTAL HARMONIC DISTORTION    0.2% LATENCY    5 ms OPERATING RANGE    27.5 m / 90 ft (line-of-sight)TRANSMITTER      INCLUDED    U4T CONNECTOR    XLR or mono unbalanced 1/4” TS with supplied adapter DIMENSIONS    100 x 30 x 28 mm / 3.8" x 1.2" x 1.1" WEIGHT    90 g / 3.17 ozRECEIVER      INCLUDED    U4R HEADPHONE OUTPUT    3.5 mm / 1/8" DIMENSIONS    60 x 47 x 41 mm / 2.36" x 1.85" x 1.61" WEIGHT    118 g / 4.16 ozBATTERY      TYPE    Rechargeable Lithium-ion (internal) BATTERY LIFE    5 hours CHARGING TIME    2.5 hrs (full charge) CHARGING VOLTAGE    5V (USB) USABLE WHILE CHARGING    Yes Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio T9 In-Ear Monitors T9 In-Ear Monitors ●  Dual balanced-armature drivers●  Hand-assembled●  Sound-isolating earphones●  3.5 mm earphone jack, compatible with all systems●  Carrying case and cleaning tool included●  Durable, replaceable cables Xvive’s T9 In-Ear Monitors have been designed by top IEM engineers in the USA to offer customers pro-level audio quality—previously only available from custom in-ears—at a much more accessible price.SOUNDS GOOD The T9 is endowed with two balanced-armature Knowles drivers: one of the industry’s largest and most powerful mid-bass drivers, and a custom-tuned, custom-ported micro tweeter. Along with a custom unified crossover, these cutting-edge components have the headroom to accommodate whatever EQ adjustments any user may desire. Nonetheless, T9 comes perfectly balanced, with a responsive and detailed sound signature that is not overly hyped or colored—so audiophiles will enjoy a fulfilling listening experience right out of the box.HIGH-PERFORMING T9 is an invaluable tool for performing live musicians, and is also perfectly suited to in-studio tracking and mixing. WIRELESS MONITORING T9 IEMs pair perfectly with Xvive’s U4 In-Ear Monitor Wireless System, providing musicians with unbeatable wireless monitoring value for live performance and studio applications. T9 and U4 are sold together as a set called U4T9.WHAT’S IN THE BOX T9 comes with three sizes of earbuds, in red and yellow silicone (using a different color for each side helps you identify right and left) and black memory foam options. There’s also a cleaning tool, an 1/8″-to-1/4″ adapter, and a hardshell carrying case! Specifications FREQUENCY RESPONSE    20 Hz - 16.5 kHz +/- 3 dB IMPEDANCE    59 ohms @ 1 kHz SENSITIVITY    120 dB @ 1 kHz TOTAL HARMONIC DISTORTION (THD)    < 0.2% @ 1 kHz MAGNETIZED FIELD STRNGTH    160 cm (48”) OPERATING TEMPERATURE    -5°C to +50°C STORAGE TEMPERATURE    -20°C to +70°C   Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U4 2.4 GHz In-Ear Monitor Wireless System THE SYSTEM The system is comprised of a transmitter unit, which connects to your audio source (typically a mixer or sound interface); and a belt-pack receiver, to which you connect your earphones or headphones.LOUD AND CLEAR The U4 system features high-resolution, 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz, a signal-to-noise ratio of 107 decibels, and more volume than you’ll ever need. The sound is better than CD quality, and much, much better than MP3 quality!LONG, EASY CHARGE The internal battery in both the transmitter and the receiver lasts for 5 hours. The battery is easily charged using the included USB cable and any standard 5V USB charger, and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used.drummer with U4 receiverAPPLICATIONS The basic application is to run a monitor mix from a soundboard, wirelessly, to one set of headphones or in-ear monitors—live, at home or in the studio. But there’s a lot more you can do with the U4 System!DIRECT COMMUNICATION If you have more than one U4 receiver, you can broadcast a signal to a whole group of people. This can be useful in situations where one person needs to communicate clearly and directly to a group—either in noisy environments or in situations where you don’t want to disturb others. This makes it an excellent option for things like group demos, presentations or tours.FREE AND EASY RECORDING For recording musicians, whether in a home or professional studio, going wireless makes the whole process so much freer and easier—especially if you’re playing or singing AND engineering at the same time!DISCREET PRACTICE If you want to practice guitar or bass privately—for example late at night—you can run your signal through a multi-effect unit or modeling amp, send either the ¼” or XLR output to your headphones or earphones, and move freely around your home! BAND ON THE RUN Your whole band—up to six musicians—can use the system together! There can be one monitor mix per transmitter, so if you have multiple U4 sets, you can customize monitor mixes for each band member. This is an easy, great-sounding and cost-effective monitoring solution for studio recording, rehearsals or live gigs. In rehearsal, this also means that there’s no need for PA speakers—so a band can practice in an apartment, or late at night. Specifications WIRELESS TYPE     2.4 GHz ISM worldwide open band BIT DEPTH/SAMPLE RATE     24-bit / 48 kHz SWITCHABLE CHANNELS     6 SIMULTANEOUS CHANNELS     6 FREQUENCY RESPONSE     20 Hz – 20 kHz (-3dB) DYNAMIC RANGE     107 dB (-3 dB) SIGNAL-TO-NOISE RATIO     107 dB STEREO/MONO     Mono TOTAL HARMONIC DISTORTION     0.2% LATENCY     5 ms OPERATING RANGE     27.5 m / 90 ft (line-of-sight) TRANSMITTER      INCLUDED     U4T CONNECTOR     XLR or mono unbalanced 1/4” TS with supplied adapter DIMENSIONS     100 x 30 x 28 mm / 3.8" x 1.2" x 1.1" WEIGHT     90 g / 3.17 oz RECEIVER      INCLUDED     U4R HEADPHONE OUTPUT     3.5 mm / 1/8" DIMENSIONS     60 x 47 x 41 mm / 2.36" x 1.85" x 1.61" WEIGHT     118 g / 4.16 oz BATTERY      TYPE     Rechargeable Lithium-ion (internal) BATTERY LIFE     5 hours CHARGING TIME     2.5 hrs (full charge) CHARGING VOLTAGE     5V (USB) USABLE WHILE CHARGING     Yes   U4 In-Ear Monitor Wireless System U4 Complete System     High-quality, ultra-compact wireless system for in-ear monitors     Audiophile 24-bit / 48 kHz sound with less than 5 ms of latency     Industry standard 2.4 GHz wireless technology     Reliable, solid RF connection over a range of 90 feet     Can also wirelessly broadcast to an audio recorder or mixer         Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U3R 2.4 GHz Dynamic Receiver THE SYSTEM The system is comprised of a transmitter unit, which connects to your microphone; and a receiver, which connects to a mixer, sound interface, preamp, XLR cable or snake.YOUR TRUE VOICE The U3 system features high-resolution, 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Sing or speak without compromising the quality of your voice or your microphone!HOLD ON TO POWER The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger—and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used.singer with u3APPLICATIONS The basic application is to run wirelessly from a dynamic microphone to a soundboard—live, at home or in the studio. But there’s a lot more you can do with the U3 System!FREE VOICE The U3 system is not only great for singers and rappers. Wireless freedom is liberating for harmonica players, public speakers, DJs, preachers, auctioneers, actors, politicians… anyone who wants to move freely while speaking or performing to an audience!BYPASS THE MIXER If you need to address a crowd through powered speaker cabinets, not only do you not need a cable, you don’t need a mixer! Just connect your U3 receiver directly to the XLR input of the cabinet.CONTROL YOUR RANGE The U3 receiver can be connected to an XLR cable or snake, meaning that the transmitter’s signal doesn’t have to reach all the way to the soundboard or monitor desk—it can broadcast to the front of the stage, or any central and convenient location.U3 receiver in mixerGET AMPED Beyond all the vocal applications, the U3 system can also be used with microphones for guitar amplifiers, as well as direct audio signals from balanced XLR outputs, for example from multi-effect processors or keyboards.PA FRIEND Run wirelessly from a PA mixing console to a powered main speaker, avoiding the hassles and risks of running speaker cables across a crowded venue! You can also run wirelessly between powered mains or between powered monitors. For stereo and multiple mono PA and DJ systems, check out the U3D!WIRELESS, CONDENSED The U3C is a version of the U3 designed for condenser microphones, and any other sound sources that require 48V or 12V of phantom power (such as active DI boxes or preamps that don’t supply phantom power).FREE INSTRUMENTS Use the U3 to roam free with any instrument that requires a microphone or clip-on microphone, such as harmonicas, violins, trumpets, saxophones and accordions! Make sure to choose the U3C if you use a condenser microphone. FREEDOM ON VIDEO The U3 system can be used to connect microphones to DSLR cameras—provided you have an adapter to run between the XLR receiver and the camera’s (usually 3.5 mm) audio input. Remember to use the U3C when connecting condenser microphones.Specifications     U3     U3C WIRELESS TYPE     2.4 GHz ISM worldwide open band     2.4 GHz ISM worldwide open band BIT DEPTH / SAMPLE RATE     24-bit / 48 kHz     24-bit / 48 kHz SWITCHABLE CHANNELS     6     6 SIMULTANEOUS CHANNELS     6     6 MODE     Input: Mic / Line     Phantom Power: 12V / 48V FREQUENCY RESPONSE     20 Hz – 20 kHz (-3dB)     20 Hz – 20 kHz (-3dB) DYNAMIC RANGE     110 dB (-3 dB)     103 dB (-3 dB) MICROPHONE COMPATIBILITY     Dynamic and battery-powered condenser microphones     Condenser microphones SIGNAL-TO-NOISE RATIO     110 dB     110 dB TOTAL HARMONIC DISTORTION     0.2%     0.2% LATENCY     5 ms     5 ms OPERATING RANGE     27.5 m / 90 ft (line-of-sight)     27.5 m / 90 ft (line-of-sight) Battery      TYPE     Rechargeable Lithium-ion (internal)     Rechargeable Lithium-ion (internal) BATTERY LIFE     5 hrs     3-7 hrs CHARGING TIME     2.5 hrs (full charge)     2.5 hrs (full charge) CHARGING VOLTAGE     5V (USB)     5V (USB) USABLE WHILE CHARGING     Yes     Yes Transmitter      MODEL     U3T     U3CT POWER     N/A     12V / 48V (onboard phantom) MODE     Input: Mic / Line     Phantom Power: 12V / 48V CONNECTOR     XLR (female)     XLR (female) DIMENSIONS     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1"     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1" WEIGHT     93 g / 3.3 oz     107.73 g / 3.8 oz MUTE     Yes     Yes Receiver      MODEL     U3R     U3RT CONNECTOR     XLR (male)     XLR (male) DIMENSIONS     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1"     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1" WEIGHT     92 g / 3.2 oz     92 g / 3.2 oz   U3 Microphone Wireless System U3R Dynamic Receiver     High-fidelity plug-and-play wireless receiver for dynamic microphones, for use with a U3 Transmitter     24-bit / 48 kHz digital audio with low distortion and wide frequency response     Stable 2.4 GHz wireless connection with a range of up to 90 feet         Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U3T 2.4 GHz Dynamic Transmitter THE SYSTEM The system is comprised of a transmitter unit, which connects to your microphone; and a receiver, which connects to a mixer, sound interface, preamp, XLR cable or snake.YOUR TRUE VOICE The U3 system features high-resolution, 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Sing or speak without compromising the quality of your voice or your microphone!HOLD ON TO POWER The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger—and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used.singer with u3APPLICATIONS The basic application is to run wirelessly from a dynamic microphone to a soundboard—live, at home or in the studio. But there’s a lot more you can do with the U3 System!FREE VOICE The U3 system is not only great for singers and rappers. Wireless freedom is liberating for harmonica players, public speakers, DJs, preachers, auctioneers, actors, politicians… anyone who wants to move freely while speaking or performing to an audience!BYPASS THE MIXER If you need to address a crowd through powered speaker cabinets, not only do you not need a cable, you don’t need a mixer! Just connect your U3 receiver directly to the XLR input of the cabinet.CONTROL YOUR RANGE The U3 receiver can be connected to an XLR cable or snake, meaning that the transmitter’s signal doesn’t have to reach all the way to the soundboard or monitor desk—it can broadcast to the front of the stage, or any central and convenient location.U3 receiver in mixerGET AMPED Beyond all the vocal applications, the U3 system can also be used with microphones for guitar amplifiers, as well as direct audio signals from balanced XLR outputs, for example from multi-effect processors or keyboards.PA FRIEND Run wirelessly from a PA mixing console to a powered main speaker, avoiding the hassles and risks of running speaker cables across a crowded venue! You can also run wirelessly between powered mains or between powered monitors. For stereo and multiple mono PA and DJ systems, check out the U3D!WIRELESS, CONDENSED The U3C is a version of the U3 designed for condenser microphones, and any other sound sources that require 48V or 12V of phantom power (such as active DI boxes or preamps that don’t supply phantom power).FREE INSTRUMENTS Use the U3 to roam free with any instrument that requires a microphone or clip-on microphone, such as harmonicas, violins, trumpets, saxophones and accordions! Make sure to choose the U3C if you use a condenser microphone. FREEDOM ON VIDEO The U3 system can be used to connect microphones to DSLR cameras—provided you have an adapter to run between the XLR receiver and the camera’s (usually 3.5 mm) audio input. Remember to use the U3C when connecting condenser microphones.Specifications     U3     U3C WIRELESS TYPE     2.4 GHz ISM worldwide open band     2.4 GHz ISM worldwide open band BIT DEPTH / SAMPLE RATE     24-bit / 48 kHz     24-bit / 48 kHz SWITCHABLE CHANNELS     6     6 SIMULTANEOUS CHANNELS     6     6 MODE     Input: Mic / Line     Phantom Power: 12V / 48V FREQUENCY RESPONSE     20 Hz – 20 kHz (-3dB)     20 Hz – 20 kHz (-3dB) DYNAMIC RANGE     110 dB (-3 dB)     103 dB (-3 dB) MICROPHONE COMPATIBILITY     Dynamic and battery-powered condenser microphones     Condenser microphones SIGNAL-TO-NOISE RATIO     110 dB     110 dB TOTAL HARMONIC DISTORTION     0.2%     0.2% LATENCY     5 ms     5 ms OPERATING RANGE     27.5 m / 90 ft (line-of-sight)     27.5 m / 90 ft (line-of-sight) Battery      TYPE     Rechargeable Lithium-ion (internal)     Rechargeable Lithium-ion (internal) BATTERY LIFE     5 hrs     3-7 hrs CHARGING TIME     2.5 hrs (full charge)     2.5 hrs (full charge) CHARGING VOLTAGE     5V (USB)     5V (USB) USABLE WHILE CHARGING     Yes     Yes Transmitter      MODEL     U3T     U3CT POWER     N/A     12V / 48V (onboard phantom) MODE     Input: Mic / Line     Phantom Power: 12V / 48V CONNECTOR     XLR (female)     XLR (female) DIMENSIONS     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1"     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1" WEIGHT     93 g / 3.3 oz     107.73 g / 3.8 oz MUTE     Yes     Yes Receiver      MODEL     U3R     U3RT CONNECTOR     XLR (male)     XLR (male) DIMENSIONS     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1"     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1" WEIGHT     92 g / 3.2 oz     92 g / 3.2 oz   U3 Microphone Wireless System U3 Microphone Wireless SystemU3T Dynamic Transmitter     High-fidelity plug-and-play wireless transmitter for dynamic microphones, for use with a U3 Receiver    24-bit / 48 kHz digital audio with low distortion and wide frequency response    Stable 2.4 GHz wireless connection with a range of up to 90 feet       Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U3C 2.4 GHz Complete Condenser System THE SYSTEM The system is comprised of a transmitter unit, which connects to your microphone; and a receiver, which connects to a mixer, sound interface, preamp, XLR cable or snake.YOUR TRUE VOICE The U3 system features high-resolution, 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Sing or speak without compromising the quality of your voice or your microphone!HOLD ON TO POWER The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger—and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used.singer with u3APPLICATIONS The basic application is to run wirelessly from a dynamic microphone to a soundboard—live, at home or in the studio. But there’s a lot more you can do with the U3 System!FREE VOICE The U3 system is not only great for singers and rappers. Wireless freedom is liberating for harmonica players, public speakers, DJs, preachers, auctioneers, actors, politicians… anyone who wants to move freely while speaking or performing to an audience!BYPASS THE MIXER If you need to address a crowd through powered speaker cabinets, not only do you not need a cable, you don’t need a mixer! Just connect your U3 receiver directly to the XLR input of the cabinet.CONTROL YOUR RANGE The U3 receiver can be connected to an XLR cable or snake, meaning that the transmitter’s signal doesn’t have to reach all the way to the soundboard or monitor desk—it can broadcast to the front of the stage, or any central and convenient location.U3 receiver in mixerGET AMPED Beyond all the vocal applications, the U3 system can also be used with microphones for guitar amplifiers, as well as direct audio signals from balanced XLR outputs, for example from multi-effect processors or keyboards.PA FRIEND Run wirelessly from a PA mixing console to a powered main speaker, avoiding the hassles and risks of running speaker cables across a crowded venue! You can also run wirelessly between powered mains or between powered monitors. For stereo and multiple mono PA and DJ systems, check out the U3D!WIRELESS, CONDENSED The U3C is a version of the U3 designed for condenser microphones, and any other sound sources that require 48V or 12V of phantom power (such as active DI boxes or preamps that don’t supply phantom power).FREE INSTRUMENTS Use the U3 to roam free with any instrument that requires a microphone or clip-on microphone, such as harmonicas, violins, trumpets, saxophones and accordions! Make sure to choose the U3C if you use a condenser microphone. FREEDOM ON VIDEO The U3 system can be used to connect microphones to DSLR cameras—provided you have an adapter to run between the XLR receiver and the camera’s (usually 3.5 mm) audio input. Remember to use the U3C when connecting condenser microphones.Specifications     U3     U3C WIRELESS TYPE     2.4 GHz ISM worldwide open band     2.4 GHz ISM worldwide open band BIT DEPTH / SAMPLE RATE     24-bit / 48 kHz     24-bit / 48 kHz SWITCHABLE CHANNELS     6     6 SIMULTANEOUS CHANNELS     6     6 MODE     Input: Mic / Line     Phantom Power: 12V / 48V FREQUENCY RESPONSE     20 Hz – 20 kHz (-3dB)     20 Hz – 20 kHz (-3dB) DYNAMIC RANGE     110 dB (-3 dB)     103 dB (-3 dB) MICROPHONE COMPATIBILITY     Dynamic and battery-powered condenser microphones     Condenser microphones SIGNAL-TO-NOISE RATIO     110 dB     110 dB TOTAL HARMONIC DISTORTION     0.2%     0.2% LATENCY     5 ms     5 ms OPERATING RANGE     27.5 m / 90 ft (line-of-sight)     27.5 m / 90 ft (line-of-sight) Battery      TYPE     Rechargeable Lithium-ion (internal)     Rechargeable Lithium-ion (internal) BATTERY LIFE     5 hrs     3-7 hrs CHARGING TIME     2.5 hrs (full charge)     2.5 hrs (full charge) CHARGING VOLTAGE     5V (USB)     5V (USB) USABLE WHILE CHARGING     Yes     Yes Transmitter      MODEL     U3T     U3CT POWER     N/A     12V / 48V (onboard phantom) MODE     Input: Mic / Line     Phantom Power: 12V / 48V CONNECTOR     XLR (female)     XLR (female) DIMENSIONS     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1"     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1" WEIGHT     93 g / 3.3 oz     107.73 g / 3.8 oz MUTE     Yes     Yes Receiver      MODEL     U3R     U3RT CONNECTOR     XLR (male)     XLR (male) DIMENSIONS     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1"     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1" WEIGHT     92 g / 3.2 oz     92 g / 3.2 oz   U3 Microphone Wireless System U3C Complete Condenser System     High-fidelity plug-and-play wireless system for condenser microphones     Provides 12V or 48V phantom power to any connected condenser microphone     24-bit / 48 kHz digital audio with low distortion and wide frequency response     Stable 2.4 GHz wireless connection with a range of up to 90 feet       Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U3 2.4 GHz Microphone Wireless System THE SYSTEM The system is comprised of a transmitter unit, which connects to your microphone; and a receiver, which connects to a mixer, sound interface, preamp, XLR cable or snake.YOUR TRUE VOICE The U3 system features high-resolution, 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Sing or speak without compromising the quality of your voice or your microphone!HOLD ON TO POWER The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger—and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used.singer with u3APPLICATIONS The basic application is to run wirelessly from a dynamic microphone to a soundboard—live, at home or in the studio. But there’s a lot more you can do with the U3 System!FREE VOICE The U3 system is not only great for singers and rappers. Wireless freedom is liberating for harmonica players, public speakers, DJs, preachers, auctioneers, actors, politicians… anyone who wants to move freely while speaking or performing to an audience!BYPASS THE MIXER If you need to address a crowd through powered speaker cabinets, not only do you not need a cable, you don’t need a mixer! Just connect your U3 receiver directly to the XLR input of the cabinet.CONTROL YOUR RANGE The U3 receiver can be connected to an XLR cable or snake, meaning that the transmitter’s signal doesn’t have to reach all the way to the soundboard or monitor desk—it can broadcast to the front of the stage, or any central and convenient location.U3 receiver in mixerGET AMPED Beyond all the vocal applications, the U3 system can also be used with microphones for guitar amplifiers, as well as direct audio signals from balanced XLR outputs, for example from multi-effect processors or keyboards.PA FRIEND Run wirelessly from a PA mixing console to a powered main speaker, avoiding the hassles and risks of running speaker cables across a crowded venue! You can also run wirelessly between powered mains or between powered monitors. For stereo and multiple mono PA and DJ systems, check out the U3D!WIRELESS, CONDENSED The U3C is a version of the U3 designed for condenser microphones, and any other sound sources that require 48V or 12V of phantom power (such as active DI boxes or preamps that don’t supply phantom power).FREE INSTRUMENTS Use the U3 to roam free with any instrument that requires a microphone or clip-on microphone, such as harmonicas, violins, trumpets, saxophones and accordions! Make sure to choose the U3C if you use a condenser microphone. FREEDOM ON VIDEO The U3 system can be used to connect microphones to DSLR cameras—provided you have an adapter to run between the XLR receiver and the camera’s (usually 3.5 mm) audio input. Remember to use the U3C when connecting condenser microphones.Specifications Use a pair dynamic microphones at the same time or send audio to active speakers with the Xvive U3D digital wireless audio system. Operating in the 2.4 GHz wireless band, with a 20 Hz to 20 kHz frequency response and less than 5 ms latency, the U3D can be used by presenters, performers, and DJs for a wide variety of applications.     U3     U3C WIRELESS TYPE     2.4 GHz ISM worldwide open band     2.4 GHz ISM worldwide open band BIT DEPTH / SAMPLE RATE     24-bit / 48 kHz     24-bit / 48 kHz SWITCHABLE CHANNELS     6     6 SIMULTANEOUS CHANNELS     6     6 MODE     Input: Mic / Line     Phantom Power: 12V / 48V FREQUENCY RESPONSE     20 Hz – 20 kHz (-3dB)     20 Hz – 20 kHz (-3dB) DYNAMIC RANGE     110 dB (-3 dB)     103 dB (-3 dB) MICROPHONE COMPATIBILITY     Dynamic and battery-powered condenser microphones     Condenser microphones SIGNAL-TO-NOISE RATIO     110 dB     110 dB TOTAL HARMONIC DISTORTION     0.2%     0.2% LATENCY     5 ms     5 ms OPERATING RANGE     27.5 m / 90 ft (line-of-sight)     27.5 m / 90 ft (line-of-sight) Battery      TYPE     Rechargeable Lithium-ion (internal)     Rechargeable Lithium-ion (internal) BATTERY LIFE     5 hrs     3-7 hrs CHARGING TIME     2.5 hrs (full charge)     2.5 hrs (full charge) CHARGING VOLTAGE     5V (USB)     5V (USB) USABLE WHILE CHARGING     Yes     Yes Transmitter      MODEL     U3T     U3CT POWER     N/A     12V / 48V (onboard phantom) MODE     Input: Mic / Line     Phantom Power: 12V / 48V CONNECTOR     XLR (female)     XLR (female) DIMENSIONS     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1"     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1" WEIGHT     93 g / 3.3 oz     107.73 g / 3.8 oz MUTE     Yes     Yes Receiver      MODEL     U3R     U3RT CONNECTOR     XLR (male)     XLR (male) DIMENSIONS     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1"     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1" WEIGHT     92 g / 3.2 oz     92 g / 3.2 oz U3 Microphone Wireless System U3 Complete Dynamic System     High-fidelity plug-and-play wireless system for dynamic microphones     24-bit / 48 kHz digital audio with low distortion and wide frequency response     Stable 2.4 GHz wireless connection with a range of up to 90 feet   Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U3 2.4 GHz Microphone Wireless System THE SYSTEM The system is comprised of a transmitter unit, which connects to your microphone; and a receiver, which connects to a mixer, sound interface, preamp, XLR cable or snake.YOUR TRUE VOICE The U3 system features high-resolution, 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Sing or speak without compromising the quality of your voice or your microphone!HOLD ON TO POWER The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger—and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used.singer with u3APPLICATIONS The basic application is to run wirelessly from a dynamic microphone to a soundboard—live, at home or in the studio. But there’s a lot more you can do with the U3 System!FREE VOICE The U3 system is not only great for singers and rappers. Wireless freedom is liberating for harmonica players, public speakers, DJs, preachers, auctioneers, actors, politicians… anyone who wants to move freely while speaking or performing to an audience!BYPASS THE MIXER If you need to address a crowd through powered speaker cabinets, not only do you not need a cable, you don’t need a mixer! Just connect your U3 receiver directly to the XLR input of the cabinet.CONTROL YOUR RANGE The U3 receiver can be connected to an XLR cable or snake, meaning that the transmitter’s signal doesn’t have to reach all the way to the soundboard or monitor desk—it can broadcast to the front of the stage, or any central and convenient location.U3 receiver in mixerGET AMPED Beyond all the vocal applications, the U3 system can also be used with microphones for guitar amplifiers, as well as direct audio signals from balanced XLR outputs, for example from multi-effect processors or keyboards.PA FRIEND Run wirelessly from a PA mixing console to a powered main speaker, avoiding the hassles and risks of running speaker cables across a crowded venue! You can also run wirelessly between powered mains or between powered monitors. For stereo and multiple mono PA and DJ systems, check out the U3D!WIRELESS, CONDENSED The U3C is a version of the U3 designed for condenser microphones, and any other sound sources that require 48V or 12V of phantom power (such as active DI boxes or preamps that don’t supply phantom power).FREE INSTRUMENTS Use the U3 to roam free with any instrument that requires a microphone or clip-on microphone, such as harmonicas, violins, trumpets, saxophones and accordions! Make sure to choose the U3C if you use a condenser microphone. FREEDOM ON VIDEO The U3 system can be used to connect microphones to DSLR cameras—provided you have an adapter to run between the XLR receiver and the camera’s (usually 3.5 mm) audio input. Remember to use the U3C when connecting condenser microphones.Specifications     U3     U3C WIRELESS TYPE     2.4 GHz ISM worldwide open band     2.4 GHz ISM worldwide open band BIT DEPTH / SAMPLE RATE     24-bit / 48 kHz     24-bit / 48 kHz SWITCHABLE CHANNELS     6     6 SIMULTANEOUS CHANNELS     6     6 MODE     Input: Mic / Line     Phantom Power: 12V / 48V FREQUENCY RESPONSE     20 Hz – 20 kHz (-3dB)     20 Hz – 20 kHz (-3dB) DYNAMIC RANGE     110 dB (-3 dB)     103 dB (-3 dB) MICROPHONE COMPATIBILITY     Dynamic and battery-powered condenser microphones     Condenser microphones SIGNAL-TO-NOISE RATIO     110 dB     110 dB TOTAL HARMONIC DISTORTION     0.2%     0.2% LATENCY     5 ms     5 ms OPERATING RANGE     27.5 m / 90 ft (line-of-sight)     27.5 m / 90 ft (line-of-sight) Battery      TYPE     Rechargeable Lithium-ion (internal)     Rechargeable Lithium-ion (internal) BATTERY LIFE     5 hrs     3-7 hrs CHARGING TIME     2.5 hrs (full charge)     2.5 hrs (full charge) CHARGING VOLTAGE     5V (USB)     5V (USB) USABLE WHILE CHARGING     Yes     Yes Transmitter      MODEL     U3T     U3CT POWER     N/A     12V / 48V (onboard phantom) MODE     Input: Mic / Line     Phantom Power: 12V / 48V CONNECTOR     XLR (female)     XLR (female) DIMENSIONS     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1"     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1" WEIGHT     93 g / 3.3 oz     107.73 g / 3.8 oz MUTE     Yes     Yes Receiver      MODEL     U3R     U3RT CONNECTOR     XLR (male)     XLR (male) DIMENSIONS     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1"     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1" WEIGHT     92 g / 3.2 oz     92 g / 3.2 oz U3 Microphone Wireless System U3 Complete Dynamic System     High-fidelity plug-and-play wireless system for dynamic microphones     24-bit / 48 kHz digital audio with low distortion and wide frequency response     Stable 2.4 GHz wireless connection with a range of up to 90 feet   Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U2R Receiver Used with a U2 Transmitter THE SYSTEM The system is comprised of a transmitter unit, which connects to your audio source (typically an electric guitar or bass); and a receiver, which is connected to an amplifier, effect pedal/pedalboard, DI box or audio interface. PRESERVE YOUR TONE The U2 system features crystal-clear 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Going wireless with the U2 system will not compromise your precious tone! TAKE CHARGE The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger—and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used. APPLICATIONS U2 can be used to replace any ¼” instrument cable. The most common application is to run a guitar or bass, wirelessly, to an amplifier—in a live performance, at home or in the studio. But there’s a lot more you can do with the U2 System! UNCHAINED Especially if you feel most comfortable with your instrument in hand, going wireless at home is truly liberating. Wander from room to room, sit anywhere, stretch your legs… you’re free. When recording at home or in the studio, having less cables means no tangles—and no tonal compromise thanks to the system’s 24-bit audio. QUICK SWITCH If you have more than one transmitter, you can keep one connected to each guitar; and when switching guitars, just power off the transmitter before you take off the first guitar, then power on the second unit as you strap on the second guitar. Just make sure all units are set to the same channel! Specifications WIRELESS TYPE    2.4 GHz ISM worldwide open band BIT DEPTH/SAMPLE RATE    24-bit / 48 kHz SWITCHABLE CHANNELS    4 SIMULTANEOUS CHANNELS    4 FREQUENCY RESPONSE    20 Hz – 20 kHz (-3dB) DYNAMIC RANGE    103 dB (-3 dB) SIGNAL-TO-NOISE RATIO    103 dB TOTAL HARMONIC DISTORTION    0.2% LATENCY    5 ms OPERATING RANGE    21.3 m / 70 ft (line-of-sight)TRANSMITTER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40.7 g / 1.43 oz MUTE    YesRECEIVER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40 g / 1.41 ozBATTERY      TYPE    Rechargeable Lithium-ion (internal) BATTERY LIFE    5 hours CHARGING TIME    2 hrs (full charge) CHARGING VOLTAGE    5V (USB) USABLE WHILE CHARGING    Yes U2 Guitar Wireless SystemU2T Transmitter - Black     Compact and lightweight transmitter for sending a wireless signal to a U2 Receiver     Add to a complete U2 system when using two or more instruments on a gig     High-fidelity 24-bit / 48 kHz digital audio     Ultra-low latency of 5 ms     Wireless signal broadcasts on the 2.4 GHz band over a range of 70 ft     Onboard rechargeable lithium battery lasts for 5 hours Model Number: U2TBLACK Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U2T Transmitter Used with a U2 Receiver THE SYSTEM The system is comprised of a transmitter unit, which connects to your audio source (typically an electric guitar or bass); and a receiver, which is connected to an amplifier, effect pedal/pedalboard, DI box or audio interface. PRESERVE YOUR TONE The U2 system features crystal-clear 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Going wireless with the U2 system will not compromise your precious tone! TAKE CHARGE The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger—and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used. APPLICATIONS U2 can be used to replace any ¼” instrument cable. The most common application is to run a guitar or bass, wirelessly, to an amplifier—in a live performance, at home or in the studio. But there’s a lot more you can do with the U2 System! UNCHAINED Especially if you feel most comfortable with your instrument in hand, going wireless at home is truly liberating. Wander from room to room, sit anywhere, stretch your legs… you’re free. When recording at home or in the studio, having less cables means no tangles—and no tonal compromise thanks to the system’s 24-bit audio. QUICK SWITCH If you have more than one transmitter, you can keep one connected to each guitar; and when switching guitars, just power off the transmitter before you take off the first guitar, then power on the second unit as you strap on the second guitar. Just make sure all units are set to the same channel! Specifications WIRELESS TYPE    2.4 GHz ISM worldwide open band BIT DEPTH/SAMPLE RATE    24-bit / 48 kHz SWITCHABLE CHANNELS    4 SIMULTANEOUS CHANNELS    4 FREQUENCY RESPONSE    20 Hz – 20 kHz (-3dB) DYNAMIC RANGE    103 dB (-3 dB) SIGNAL-TO-NOISE RATIO    103 dB TOTAL HARMONIC DISTORTION    0.2% LATENCY    5 ms OPERATING RANGE    21.3 m / 70 ft (line-of-sight)TRANSMITTER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40.7 g / 1.43 oz MUTE    YesRECEIVER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40 g / 1.41 ozBATTERY      TYPE    Rechargeable Lithium-ion (internal) BATTERY LIFE    5 hours CHARGING TIME    2 hrs (full charge) CHARGING VOLTAGE    5V (USB) USABLE WHILE CHARGING    Yes U2 Guitar Wireless SystemU2T Transmitter - Black     Compact and lightweight transmitter for sending a wireless signal to a U2 Receiver     Add to a complete U2 system when using two or more instruments on a gig     High-fidelity 24-bit / 48 kHz digital audio     Ultra-low latency of 5 ms     Wireless signal broadcasts on the 2.4 GHz band over a range of 70 ft     Onboard rechargeable lithium battery lasts for 5 hours Model Number: U2TBLACK Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U2 Digital Wireless System 2.4 GHz for Guitars - Tone Sunburst THE SYSTEM The system is comprised of a transmitter unit, which connects to your audio source (typically an electric guitar or bass); and a receiver, which is connected to an amplifier, effect pedal/pedalboard, DI box or audio interface.PRESERVE YOUR TONE The U2 system features crystal-clear 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Going wireless with the U2 system will not compromise your precious tone!TAKE CHARGE The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger—and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used. APPLICATIONS U2 can be used to replace any ¼” instrument cable. The most common application is to run a guitar or bass, wirelessly, to an amplifier—in a live performance, at home or in the studio. But there’s a lot more you can do with the U2 System!UNCHAINED Especially if you feel most comfortable with your instrument in hand, going wireless at home is truly liberating. Wander from room to room, sit anywhere, stretch your legs… you’re free. When recording at home or in the studio, having less cables means no tangles—and no tonal compromise thanks to the system’s 24-bit audio. QUICK SWITCH If you have more than one transmitter, you can keep one connected to each guitar; and when switching guitars, just power off the transmitter before you take off the first guitar, then power on the second unit as you strap on the second guitar. Just make sure all units are set to the same channel! Specifications WIRELESS TYPE    2.4 GHz ISM worldwide open band BIT DEPTH/SAMPLE RATE    24-bit / 48 kHz SWITCHABLE CHANNELS    4 SIMULTANEOUS CHANNELS    4 FREQUENCY RESPONSE    20 Hz – 20 kHz (-3dB) DYNAMIC RANGE    103 dB (-3 dB) SIGNAL-TO-NOISE RATIO    103 dB TOTAL HARMONIC DISTORTION    0.2% LATENCY    5 ms OPERATING RANGE    21.3 m / 70 ft (line-of-sight)TRANSMITTER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40.7 g / 1.43 oz MUTE    Yes RECEIVER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40 g / 1.41 oz BATTERY      TYPE    Rechargeable Lithium-ion (internal) BATTERY LIFE    5 hours CHARGING TIME    2 hrs (full charge) CHARGING VOLTAGE    5V (USB) USABLE WHILE CHARGING    Yes   U2 Guitar Wireless System U2 Complete System - Tone Sunburst     Compact and lightweight plug-and-play wireless system for guitars, basses and other instruments     High-fidelity 24-bit / 48 kHz digital audio     Ultra-low latency of 5 ms     Wireless signal broadcasts on the 2.4 GHz band over a range of 70 ft     Onboard rechargeable lithium battery lasts for 5 hours Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.