Class-D Amplifiers (403)

Soundstream AR1-3000D Arachnid Series Monoblock Class D Car Stereo Subwoofer Arachnid Amplifiers are the next step in performance and value. Taking advantage of our tried and true Class A/B Full Range and Improved Efficient Class-D Monoblock available platforms. Arachnid Series continues down the road of reliability and longevity you expect from us. Boosting a small electrical audio signal to a much higher voltage capable of driving speakers and subwoofers. Most vehicles’ standard systems can’t offer this high-power output that pushes your audio system to high volumes and precision like the Arachnid Series Amplifiers can. General Features: 3,000W Monoblock Class D Arachnid Series Car Amplifier with Bass Remote Hybrid Aluminum Alloy Heatsink for Optimum Dissipation MOSFET Power Supply w/ Audiophile Grade IRTM Transistors Military Grade SMT PCB Maintains Dynamic Performance Direct Short, Thermal, & Overload Circuits Protect Amplifier 200mV-6V Low Level/RCA Input w/ Bridged Operation Outputs Barrier Strip Wire Terminals, 4g Power & 8g Speaker Outputs Variable 12dB High Pass, Low Pass, & Subsonic Crossovers 12dB Bass Boost Increases Low Octave Harmonics Dash Mount Gain Control Module Included MAX Power: 3,000w RMS Power 4Ω: 350 x 1 RMS Power 2Ω: 600 x 1 RMS Power 1Ω/4Ω Bridged: 1,000x 1 (1Ω) Remote Gain Control: Included Dimensions: 8.75” D x 2.25” H 12.25” W 3-Year Warranty Manufacture Warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier & Absolute KIT0 0 Gauge / 2500 Watt Complete Amplifier Hookup Installation Kit Bundle The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box. General Features: Hi-Res Audio Certified (Up to 40kHz) Power Rating: 14.4V, < 0.3% THD +N Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω Bridged Power: 180W RMS x 2 @ 4Ω 4-Channel Amplifier Alpine’s Class D Amplifier Circuit Two-sided terminal layout Built-in Selectable/ Adjustable Crossovers Mid-Bass EQ Input for more power Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately) Dimensions: 8.7” W x 2.25” H x 8.25” D Weight: 4 lbs, 13 oz S/N Ratio: >83dB Frequency Response: 20Hz – 40kHz Damping Factor: >100 Owner’s Manual 4 Self-tapping screws Hexagon wrench What is in the S2-A36F package: S2-A36F owner's manual 4-Channel amplifier 2 End caps Four 3/4" screws Four 1/4" screws 2mm Allen key Owner's manual Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate Prime R1200-1D 1200W RMS Prime Series Class-D Monoblock 1-Ohm Stable Amplifier The PRIME R1200-1D is an ultra-efficient mono amplifier for cars and trucks that can produce 1,200 Watts into a 1-Ohm load without taxing the electrical system. The frequency response of the R1200-1D is optimized exclusively for use with subwoofers. The Prime R1200-1D subwoofer amplifier offers high efficiency through the implementation of its Class-D circuitry while delivering rich, full bass to any system. This car amplifier is optimized for subwoofers with the implementation of an infrasonic filter to keep those ultra-low (inaudible) bass notes from damaging your subwoofer system. Match with a 4-channel stereo amplifier for your mids/highs and you'll have a Rockford Fosgate system that any Car Audio Fanatic will envy. General Features: Rockford Fosgate Prime Series R1200-1D Class-D 1-Ohm Stable Monoblock Amplifier RMS Power Rating: 4 ohms: 400 watts x 1 channel RMS Power Rating: 2 ohms: 800 watts x 1 channel RMS Power Rating: 1 ohm: 1200 watts x 1 channel CEA-2006 Compliant Amplifier Pulse Width Modulated MOSFET power supply Wired remote bass level control included LED power (green) and protect (red) indicators Soft start turn-on Nickel-plated RCA level inputs Nickel-plated screw terminals Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection) Heavy-duty aluminum alloy heat-sink for extreme heat dissipation Input sensitivity: 150mV - 4V Frequency Response: 20 - 250Hz Total Harmonic Distortion (THD): <1.0% Signal to Noise Ratio: 100dB Variable low-pass filter: 50 - 250 Hz, 12 dB/octave Subsonic (infrasonic) filter: 15 - 40 Hz , 12 dB/octave Variable Bass Boost: 0 to +18 dB bass boost at 45 Hz Fuse Rating: 150A x 1 (recommended, not included) 12 AWG speaker wire gauge outputs 4 gauge power and ground wiring is recommended for installation Weight: 7.825 lbs Dimensions: 11.06"W x 6.77"L x 1.97"H Also Found As Prime 1200 Watt, R12001D, R1200, R12001 Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca