All Products (8819)

Axxess AXDIS-GMLN29 Wiring Interface Install a new car stereo and retains the safety warning chimes in select 2006-2025 vehicles from GMC, Chevrolet, Cadillac with GMK317 Dash Kit Replacement Part for: AXGMLN-012 General Features: Compatible with select 2006-2025 vehicles from GMC, Chevrolet, Cadillac Designed to install a new aftermarket car stereo Provides accessory power (12-volt 10-amp) Retains R.A.P.（retained accessory power） Provides NAV outputs (parking brake, reverse, and V.S.S) Retains all safety and warning chimes Retains steering wheel audio controls Retains OnStar / OE Bluetooth Adjustable OnStar level Retains the factory AUX-IN jack Retains the factory backup camera Retains RSE (rear seat entertainment) Retains SAT (satellite radio) Designed for non-amplified, or analog/digital amplified models Retains balance and fade (excluding digital amplified models) Includes an antenna adapter Micro-B USB updatable Authorized Internet Dealer 1-year Manufacturer's Warranty Compatible Vehicles: Buick Enclave 2008-2017 Lucerne 2006-2011 Cadillac DTS 2006-2011 (5) Escalade 2007-2014 SRX 2007-2009 (5) Chevrolet Avalanche 2007-2013 (2) (3) Captiva Sport 2012-2015 (2) Equinox 2007-2009 Express 2008-Up (1) Impala 2006-2013 Impala Limited 2014-2016 Monte Carlo 2006-2007 Silverado 2500 / 3500 2014 (2) (3) Silverado (new body) 2007-2013 (2) (3) Suburban 2007-2014 （2） （4） Tahoe 2007-2014 (2) Traverse 2009-2017 GMC Acadia 2007-2016 Acadia Limited 2017 Savana 2008-2023 (1) Sierra 2500 / 3500 2014 (2) (3) Sierra (new body) 2007-2013 (2) (3) Yukon / Yukon XL 2007-2014 (2) (4) Hummer H2 2008-2009 (5) Pontiac Torrent 2007-2009 Saturn Outlook 2007-2010 Vue 2008-2010 Suzuki XL-7 2007-2009 (1) For 2013-2015 models equipped with NAV, use the AX-GMLAN44-SWC. (2) For 2012-Up models equipped with NAV, use the AX-GMLAN44-SWC. (3) These vehicles have a digital amp option. Please refer to the Service Parts Identification sticker located in the glove box for the RPO code Y91. If Y91 is present, then the vehicle is equipped with a digital amplifier. (4) These vehicles have a digital amp option. Please reference the Service Parts Identification sticker located in the glove box for the RPO code STZ or Y91. If STZ or Y91 is present, then the vehicle is equipped with a digital amplifier. (5) These vehicles are standard for a digital amplifier. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Metra Axxess AXDIS-GMLN29 Wiring Interface Install a new car stereo and retains the safety warning chimes in select 2006-2025 vehicles from GMC, Chevrolet, Cadillac Replacement Part for: AXGMLN-012 General Features: Compatible with select 2006-2025 vehicles from GMC, Chevrolet, Cadillac Designed to install a new aftermarket car stereo Provides accessory power (12-volt 10-amp) Retains R.A.P. (retained accessory power) Provides NAV outputs (parking brake, reverse, and V.S.S) Retains all safety and warning chimes Retains steering wheel audio controls Retains OnStar / OE Bluetooth Adjustable OnStar level Retains the factory AUX-IN jack Retains the factory backup camera Retains RSE (rear seat entertainment) Retains SAT (satellite radio) Designed for non-amplified, or analog/digital amplified models Retains balance and fade (excluding digital amplified models) Includes an antenna adapter Micro-B USB updatable Authorized Internet Dealer 1-year Manufacturer's Warranty Compatible Vehicles: Buick Enclave 2008-2017 Lucerne 2006-2011 Cadillac DTS 2006-2011 (5) Escalade 2007-2014 SRX 2007-2009 (5) Chevrolet Avalanche 2007-2013 (2) (3) Captiva Sport 2012-2015 (2) Equinox 2007-2009 Express 2008-Up (1) Impala 2006-2013 Impala Limited 2014-2016 Monte Carlo 2006-2007 Silverado 2500 / 3500 2014 (2) (3) Silverado (new body) 2007-2013 (2) (3) Suburban 2007-2014 （2） （4） Tahoe 2007-2014 (2) Traverse 2009-2017 GMC Acadia 2007-2016 Acadia Limited 2017 Savana 2008-2023 (1) Sierra 2500 / 3500 2014 (2) (3) Sierra (new body) 2007-2013 (2) (3) Yukon / Yukon XL 2007-2014 (2) (4) Hummer H2 2008-2009 (5) Pontiac Torrent 2007-2009 Saturn Outlook 2007-2010 Vue 2008-2010 Suzuki XL-7 2007-2009 (1) For 2013-2015 models equipped with NAV, use the AX-GMLAN44-SWC. (2) For 2012-Up models equipped with NAV, use the AX-GMLAN44-SWC. (3) These vehicles have a digital amp option. Please refer to the Service Parts Identification sticker located in the glove box for the RPO code Y91. If Y91 is present, then the vehicle is equipped with a digital amplifier. (4) These vehicles have a digital amp option. Please reference the Service Parts Identification sticker located in the glove box for the RPO code STZ or Y91. If STZ or Y91 is present, then the vehicle is equipped with a digital amplifier. (5) These vehicles are standard for a digital amplifier. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Axxess AXDIS-GMLN29 Wiring Interface Install a new car stereo and retains the safety warning chimes in select 2006-2025 vehicles from GMC, Chevrolet, Cadillac Replacement Part for: AXGMLN-012 General Features: Compatible with select 2006-2025 vehicles from GMC, Chevrolet, Cadillac Designed to install a new aftermarket car stereo Provides accessory power (12-volt 10-amp) Retains R.A.P.（retained accessory power） Provides NAV outputs (parking brake, reverse, and V.S.S) Retains all safety and warning chimes Retains steering wheel audio controls Retains OnStar / OE Bluetooth Adjustable OnStar level Retains the factory AUX-IN jack Retains the factory backup camera Retains RSE (rear seat entertainment) Retains SAT (satellite radio) Designed for non-amplified, or analog/digital amplified models Retains balance and fade (excluding digital amplified models) Includes an antenna adapter Micro-B USB updatable Authorized Internet Dealer 1-year Manufacturer's Warranty Compatible Vehicles: Buick Enclave 2008-2017 Lucerne 2006-2011 Cadillac DTS 2006-2011 (5) Escalade 2007-2014 SRX 2007-2009 (5) Chevrolet Avalanche 2007-2013 (2) (3) Captiva Sport 2012-2015 (2) Equinox 2007-2009 Express 2008-Up (1) Impala 2006-2013 Impala Limited 2014-2016 Monte Carlo 2006-2007 Silverado 2500 / 3500 2014 (2) (3) Silverado (new body) 2007-2013 (2) (3) Suburban 2007-2014 （2） （4） Tahoe 2007-2014 (2) Traverse 2009-2017 GMC Acadia 2007-2016 Acadia Limited 2017 Savana 2008-2023 (1) Sierra 2500 / 3500 2014 (2) (3) Sierra (new body) 2007-2013 (2) (3) Yukon / Yukon XL 2007-2014 (2) (4) Hummer H2 2008-2009 (5) Pontiac Torrent 2007-2009 Saturn Outlook 2007-2010 Vue 2008-2010 Suzuki XL-7 2007-2009 (1) For 2013-2015 models equipped with NAV, use the AX-GMLAN44-SWC. (2) For 2012-Up models equipped with NAV, use the AX-GMLAN44-SWC. (3) These vehicles have a digital amp option. Please refer to the Service Parts Identification sticker located in the glove box for the RPO code Y91. If Y91 is present, then the vehicle is equipped with a digital amplifier. (4) These vehicles have a digital amp option. Please reference the Service Parts Identification sticker located in the glove box for the RPO code STZ or Y91. If STZ or Y91 is present, then the vehicle is equipped with a digital amplifier. (5) These vehicles are standard for a digital amplifier. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Metra Axxess AXGMLN-09 GM LAN-29 Data Interface 2014-Up General Features:     Provides accessory power (12-volt 10-amp)     Retains R.A.P.（Retained Accessory Power）     Used in non-amplified systems or when replacing amplified systems     Provides NAV outputs (parking brake, reverse, mute, and speed sense)     Pre-wired AXSWC harness （AXSWC sold separately）     Retains OnStar®/OE Bluetooth®, chimes, and balance and fade     Adjustable gain control for chimes and OnStar® and high-level speaker input     Can be used with extension AX-GMLAN09EXT     Micro-B USB updatable Compatible Vehicles: Chevrolet     Colorado 2015-2018 (1)     Corvette 2014-2019*     Equinox 2018 (1)     Impala 2014-2018*     Malibu 2016-2018 (2)     Silverado 2015-2018 (3)     Silverado 1500 2014-2018     Silverado 2500/3500 2015-2019 (3)     Silverado LD 2019 (1)     Suburban 2015-2020     Tahoe 2015-2020 GMC     Canyon 2015-2018 (1)     Sierra 2015-2018 (3)     Sierra 1500 2014-2018 (3)     Sierra 2500/3500 2015-2019 (3)     Sierra Limited 2019 (1)     Yukon / Yukon XL 2015-2020 * Must use with AXM50-GM1 (1) With RPO code IO5 or IO6(2) With RPO code IO3, IO5 or IO6(3) With Base model radio – RPO code IP1 Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Metra Axxess AXDIS-CL2 Wiring Interface: Install a new car stereo and retain the safety warning chimes in select 2000-2013 vehicles from Chevrolet, GMC, and Pontiac Replacement Part for: AXGMLN-04, AXGMLN-01 General Features: Compatible with select 2000-2013 vehicles from Chevrolet, GMC, and Pontiac Designed to install a new aftermarket car stereo Provides accessory power (12-volt 10-amp) Retains R.A.P. (retained accessory power） Provides NAV outputs (parking brake, reverse, and V.S.S) Retains all safety and warning chimes Retains OnStar /OEM Bluetooth Adjustable volume for OnStar Retains factory satellite radio Adjustable gain control for overall volume （digital amplified models only） High-level speaker input For non-amplified models or analog/digital amplified models Retains balance and fade （including digital fader） Micro-B USB updatable Authorized Internet Dealer 1-year Manufacturer's Warranty Compatible Vehicles: Buick Century 2004-2005 Rainier 2004 (1) Rainier 2005-2007 Regal 2004 Rendezvous 2002-2007 Terraza 2005-2007 Cadillac Escalade / Escalade ESV & EXT 2003-2006 (3) Chevrolet Avalanche 2003-2006 (2) Cavalier 2000-2005 Colorado 2004-2014 Corvette 2005-2013 Express 2003-2007 Impala 2000-2005 Kodiak C4500-C8500 2003-2009 Malibu 2001-2003 Malibu Classic 2004-2005 Monte Carlo 2000-2005 Silverado 2003-2006 (2) Silverado Classic 2007 (2) SSR 2003-2006 (2) Suburban 2003-2006 (2) Tahoe 2003-2006 (2) Trailblazer 2002-2004 (1) Trailblazer 2005-2009 Uplander 2005-2008 Venture 2000-2005 GMC Canyon 2004-2012 Envoy 2002-2004 (1) Envoy 2005-2009 Savana 2003-2007 Sierra 2003-2006 (2) Sierra Classic 2007 (2) Top Kick C4500-C8500 2005-2009 Yukon / Yukon XL 2003-2006 (2) Hummer H2 2003-2007 (3) H3 / H3T 2006-2010 Isuzu Ascender 2003-2008 I Series 2006-2008 Oldsmobile Alero 2001-2004 Bravada 2002-2004 (1) Intrigue 2002 Silhouette 2000-2004 Pontiac Aztec 2001-2005 Grand Am 2001-2005 Grand Prix 2004-2008 Montana 2005-2006 Sunfire 2000-2005 SAAB 9-7× 2005-2009 Saturn Relay 2005-2007 (1) These vehicles have a digital amp option. Please reference the Service Parts Identification sticker located in the glove box for the RPO code UQA. If UQA is present, then the vehicle is equipped with a digital amplifier. (2) These vehicles have a digital amp option. Please reference the Service Parts Identification sticker located in the glove box for the RPO code Y91, If Y91 is present, then the vehicle is equipped with a digital amplifier. (3) These vehicles are standard for a digital amplifier. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Axxess AXDIS-CL2 Wiring Interface Install a new car stereo and retain the safety warning chimes in select 2000-2013 vehicles from Chevrolet, GMC, and Pontiac Replacement Part for: AXGMLN-04 General Features: Compatible with select 2000-2013 vehicles from Chevrolet, GMC, Pontiac Designed to install a new aftermarket car stereo Provides accessory power (12-volt 10-amp) Retains R.A.P. (retained accessory power） Provides NAV outputs (parking brake, reverse, and V.S.S) Retains all safety and warning chimes Retains OnStar /OEM Bluetooth Adjustable volume for OnStar Retains factory satellite radio Adjustable gain control for overall volume （digital amplified models only） High-level speaker input For non-amplified models or analog/digital amplified models Retains balance and fade （including digital fader） Micro-B USB updatable Authorized Internet Dealer 1-year Manufacturer's Warranty Compatible Vehicles: Buick Century 2004-2005 Rainier 2004 (1) Rainier 2005-2007 Regal 2004 Rendezvous 2002-2007 Terraza 2005-2007 Cadillac Escalade / Escalade ESV & EXT 2003-2006 (3) Chevrolet Avalanche 2003-2006 (2) Cavalier 2000-2005 Colorado 2004-2014 Corvette 2005-2013 Express 2003-2007 Impala 2000-2005 Kodiak C4500-C8500 2003-2009 Malibu 2001-2003 Malibu Classic 2004-2005 Monte Carlo 2000-2005 Silverado 2003-2006 (2) Silverado Classic 2007 (2) SSR 2003-2006 (2) Suburban 2003-2006 (2) Tahoe 2003-2006 (2) Trailblazer 2002-2004 (1) Trailblazer 2005-2009 Uplander 2005-2008 Venture 2000-2005 GMC Canyon 2004-2012 Envoy 2002-2004 (1) Envoy 2005-2009 Savana 2003-2007 Sierra 2003-2006 (2) Sierra Classic 2007 (2) Top Kick C4500-C8500 2005-2009 Yukon / Yukon XL 2003-2006 (2) Hummer H2 2003-2007 (3) H3 / H3T 2006-2010 Isuzu Ascender 2003-2008 I Series 2006-2008 Oldsmobile Alero 2001-2004 Bravada 2002-2004 (1) Intrigue 2002 Silhouette 2000-2004 Pontiac Aztec 2001-2005 Grand Am 2001-2005 Grand Prix 2004-2008 Montana 2005-2006 Sunfire 2000-2005 SAAB 9-7× 2005-2009 Saturn Relay 2005-2007 (1) These vehicles have a digital amp option. Please reference the Service Parts Identification sticker located in the glove box for the RPO code UQA. If UQA is present, then the vehicle is equipped with a digital amplifier. (2) These vehicles have a digital amp option. Please reference the Service Parts Identification sticker located in the glove box for the RPO code Y91, If Y91 is present, then the vehicle is equipped with a digital amplifier. (3) These vehicles are standard for a digital amplifier. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PV7 ND Magnet Dynamic Microphone with XLR to XLR Cable Since 1965, they have turned to Peavey When Only The Best Will Do. The PV 7 Microphone Carries on This Tradition of Excellence, Offering Uncompromising Quality And The Sound That's Made Peavey Famous At Remarkably Affordable Prices. The Performer and Presenter Alike Can Appreciate The No-Nonsense Feature Set And Simplicity of the PV 7 Mic. With High Sensitivity, a Neodymium Magnet Diaphragm, an On/Off switch, And The Durability you've Come To Expect From Peavey, You Know The PV 7 will get the job done, even when the budget is stretched to the max (and whose isn't These Days?). Includes 5-Meter XLR To XLR Cable. Peavey Item 03013490. General Features: PV 7 Microphone XLR to XLR ND magnet diaphragm High sensitivity Includes 5-meter XLR to XLR mic cable Weight Packed: 0.97 lb(0.44 kg) Width Packed: 3.25"(8.255 cm) Height Packed: 11"(27.94 cm) Depth Packed: 2.75"(6.985 cm) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Soundstream T5.154 Tarantula T5 2,600 Watt 15" Dual 4-Ohm Subwoofer Tarantula subwoofers have evolved to meet various performance and placement goals in recent years, keeping your suggestions, the Soundstream fanatic, in mind. However, more often than not, we hear your calls to bring back a legend. Improvements include direct-connect wire leads, an oversaturated 12mm top plate and t-yoke, and a double-stitched cone to a high-density polyether foam surround for improved sound quality. General Features: Overcompensating Motor Structure for Increased Magnetic Strength 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up Non-Magnetic Non-Resonant Die-Cast Aluminum Frame 3” 4-Layer Voice Coil w/ Direct Connect Wire Increases Power Handling High-Temperature Tolerance Adhesives Resist Thermal Failure Non-Transfer Spruce Pulp Cone w/ UV & Chemical Protection Stitched and Glued Surround/Cone Joints for Strongest Bonding Extended Excursion Polyether Foam Surround w/ UV & Chemical Protection Dual Poly-Cotton Suspension Dampen Violent Accelerations 1-pc Gasket/Trim Ring w/ Concealed Mounting Holes Included MAX Power (watts): 2,600 RMS Power (watts): 1,300 Efficiency (1w/1m dB): 88dB Voice Coil Configuration: 3” DVC 4Ω Mounting Depth: 9.25” Optimum Sealed Box: 2.00ft3 Optimum Ported Box: 4.00ft3 Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

MR DJ PBX6500LED PRIME Professional Dual 15” 3-Way Full-Range Powered/Active DJ PA Multipurpose Live Sound Bluetooth Loudspeaker More Than Just Another Great MR DJ Sound System, The New MR DJ USA Professional Pro Series Does Everything You Demand in a No-Compromise Family of Professional Loudspeakers. This speaker solves every performance and Installation Challenge You Have. They are High-Performance in every sense: their new transducers and amplifiers enable them to Play Extremely Loud and Clear, Without Compromise or Restriction. They are "High-Performance" From a Concept and Manufacturing Standpoint MR DJ Made Sure That Every Aspect of Their Design Outperformed What It Had to Do. The result is Loudspeakers That Achieve a Level of Excellence and Refinement That Defies Expectations. Defies Your Expectations. Designed and Tuned in the USA The PBX6500LED is a Complete All-In-One Dual 15” Powered DJ speaker with Incredible Bass and Clear Highs. This speaker is a Powerhouse, and it goes crazy loud. It is perfect for Parties with around 100 People or fewer. Yes, it is Truly That Loud! The TWS Technology Allows You to pair two of these speakers Wirelessly. When Using TWS, You Can Play Back Stereo Sound with a Right and Left Channel. Pairing with TWS is as Simple as Clicking The two Pairing Buttons. The LCD Display Will Tell You When You Are Paired. General Features: 3-Way Dual 15” Portable Powered Active Full Range Speaker Dual 15" 5000 Watts P.M.P.O Powered Active Pro PA DJ Speaker Designed and Tuned in the USA Advanced Network Topology Crossover Design Built-in Bluetooth Technology, USB/SD Card Reader, FM Radio, Recorder Tuner Ready 6 Band EQ Graphic, 2 Mic In XLR Input, 2 Line In 1/4“ Jack RCA Input, Line Out RCA Output, XLR Line Output Guitar/microphone input, delay control effect LCD MP3 Display with The Control Key Included A Remote Control Dual 15” Woofer 60 Oz Magnet. 3” Voice Coil, Tweeter 44mm Ti Diap Compressor Driver 5000 Watts P.M.P.O, 400 Watts RMS Built-in amplifier with Amazing Sound Quality Dual 15" Long-Throw Woofer with 2" KSV Voice Coils and 60 Oz Magnets and Non-Pressed Paper Cones Built-in TWS Wireless Speaker to Speaker Linking (If You Buy 2 Of These, You Can Link Them Together Wirelessly to Play in Stereo) 2” Inch Compression Neodymium Magnet HF Horn Drivers For Clear Highs Each Speaker Has A Trolley Handle and Wheels, Making It Easy to Transport Controls: 5 Band Master Equalizer, Master Volume, Input Volume, MP3 Volume, Mic Volume, Master Bass, Master Treble (2) XLR and ¼” Mic Inputs with Mic Volume and Echo Controls XLR And RCA Line Inputs XLR Output to Connect A Subwoofer or More Speakers Master Volume/Mp3 Volume/ Master Treble/ Master Bass Knobs Built-in Bluetooth Wireless Audio Streaming With a 60-Foot Range and Clear Streaming Quality USB/Sd Mp3 Music Player Allows You to Play Back Audio Stored on A USB Drive or Sd Card FM Radio Built-In with Manual Tuning LCD Screen- Displays MP3 functions and Easy Bluetooth Connectivity Pairing Wireless Remote Control Enclosures Are Made with Exceptionally Rugged High Impact Abs Built-in multi-color LED woofer and tweeter lights High-Quality Designer Wireless Remote Control Power LED on Rear Metal Grill Covered Speakers Microphone Volume Microphone Echo Microphone Delay Microphone Treble Microphone Bass X-Bass Remote Control Handlebars and Wheels AC 110/220V 60Hz-50Hz Colors: Black Frequency Response: 45hz - 20khz Maximum SPL@ 1w/1m: 128db 115/230 Volt Switchable for Use in Countries Around the World Box Dimensions: 18" X 18" X 43" Unit Dimensions: 16" x 15" x 39" Speaker Weight: 40.5 Lbs. Shipping Weight: 42 Lbs. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

American Terminal ASLT1-20 20 Ft 1" 25mm Split Wire Loom Conduit Polyethylene Tubing Black Color Sleeve Tube  High-quality commercial-grade split loom tubing is a standard wire split loom and is the most commonly used for organizing and protecting wire runs. The split that runs along the entire length of the loom makes wire insertion easy, and once the wire run is inserted, the split remains closed. This standard loom will work with various automotive, marine, and industrial wiring applications. Polyethylene slit loom has become one of the most popular methods for holding groups of wires in position and protecting them against abrasion and crushing. When bent or twisted, the split remains closed. Quality control throughout the extrusion process ensures uniform thickness for the entire run length.  Polyethylene Split Loom Tubing Has Become One of The Most Popular Conduits for Holding Groups of Wires in Position and Protecting the Wires Against Abrasion or Crushing. Our Braided Cable Sleeping Wrap is Resistant to Various Abrasions, reduces damage, Suitable for Various Electric insulations, Efficiently Arranges and protects the Cables, ensures the Cable Management is neat and Clean/Insulation Sealing Wear-Resistant General Feature: • Color: Black • Materials: Polyethylene • Operating Temperature Range: -40˚ To 200˚F (-40˚C To 93˚C) • Our wire loom is made of 100% new and high-quality polyethylene • The Split That Runs Along the Whole Length of The Loom Makes Wire Insertion Easy, and Once the Wire Run Is Inserted, The Split Remains Closed. • Perfect for Holding Groups of Wires in Position and Protecting the Wires Against Abrasion or Crushing. • Ideal for Various Automotive, Home, Marine, Industrial Wiring Applications, Etc. … • Ribbed Design Allows for A Flexible Tube That Is Easy to Install • Practical Design The Split That Runs Along the Whole Length of The Loom Makes Wire Insertion Easy, and Once the Wire Run Is Inserted, The Split Remains Closed • When Bent or Twisted, The Split Remains Closed • Resistant to Abrasion, Gasoline, Oil, And Many Other Chemicals • Great for Wrapping Power/Ground Cable • Protect Cables from Wear & High Temperature • Prolong the Service Life of The Cable • Very Easy to Bend • Very High Abrasion, Impact, and Shock Resistance  • Flexible Ribbed Tube Design for clean and easy installation • Oil, Gasoline, and abrasion-resistant  • High Flexibility & Fatigue Life, allows for A Flexible Tube That is Easy to bend and install • Our split loom is split and easy to put wires in. • Our split loom tubing is thick enough to provide complete protection for the wires • Our split wire loom is used to protect electrical wiring in industry, automotive, home & office  • Our wire loom tubing is resistant to abrasion & harmful chemicals. Good chemical stability  • Our wire protector tubing is used to wrap wires and make cables neat and orderly Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

American Terminal ASLT1-50 50 Ft 1" 25mm Split Wire Loom Conduit Polyethylene Tubing Black Color Sleeve Tube  High-quality commercial-grade split loom tubing is a standard wire split loom and is the most commonly used for organizing and protecting wire runs. The split that runs along the entire length of the loom makes wire insertion easy, and once the wire run is inserted, the split remains closed. This standard loom will work with various automotive, marine, and industrial wiring applications. Polyethylene slit loom has become one of the most popular methods for holding groups of wires in position and protecting them against abrasion and crushing. When bent or twisted, the split remains closed. Quality control throughout the extrusion process ensures uniform thickness for the entire run length.  Polyethylene Split Loom Tubing Has Become One of The Most Popular Conduits for Holding Groups of Wires in Position and Protecting the Wires Against Abrasion or Crushing. Our Braided Cable Sleeping Wrap is Resistant to Various Abrasions, reduces damage, Suitable for Various Electric insulations, Efficiently Arranges and protects the Cables, ensures the Cable Management is neat and Clean/Insulation Sealing Wear-Resistant General Feature: • Color: Black • Materials: Polyethylene • Operating Temperature Range: -40˚ To 200˚F (-40˚C To 93˚C) • Our wire loom is made of 100% new and high-quality polyethylene • The Split That Runs Along the Whole Length of The Loom Makes Wire Insertion Easy, and Once the Wire Run Is Inserted, The Split Remains Closed. • Perfect for Holding Groups of Wires in Position and Protecting the Wires Against Abrasion or Crushing. • Ideal for Various Automotive, Home, Marine, Industrial Wiring Applications, Etc. … • Ribbed Design Allows for A Flexible Tube That Is Easy to Install • Practical Design The Split That Runs Along the Whole Length of The Loom Makes Wire Insertion Easy, and Once the Wire Run Is Inserted, The Split Remains Closed • When Bent or Twisted, The Split Remains Closed • Resistant to Abrasion, Gasoline, Oil, And Many Other Chemicals • Great for Wrapping Power/Ground Cable • Protect Cables from Wear & High Temperature • Prolong the Service Life of The Cable • Very Easy to Bend • Very High Abrasion, Impact, and Shock Resistance  • Flexible Ribbed Tube Design for clean and easy installation • Oil, Gasoline, and abrasion-resistant  • High Flexibility & Fatigue Life, allows for A Flexible Tube That is Easy to bend and install • Our split loom is split and easy to put wires in. • Our split loom tubing is thick enough to provide complete protection for the wires • Our split wire loom is used to protect electrical wiring in industry, automotive, home & office  • Our wire loom tubing is resistant to abrasion & harmful chemicals. Good chemical stability  • Our wire protector tubing is used to wrap wires and make cables neat and orderly Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

American Terminal ASLT1-200 200 Ft 1" 25mm Split Wire Loom Conduit Polyethylene Tubing Black Color Sleeve Tube  High-quality commercial-grade split loom tubing is a standard wire split loom and is the most commonly used for organizing and protecting wire runs. The split that runs along the entire length of the loom makes wire insertion easy, and once the wire run is inserted, the split remains closed. This standard loom will work with various automotive, marine, and industrial wiring applications. Polyethylene slit loom has become one of the most popular methods for holding groups of wires in position and protecting them against abrasion and crushing. When bent or twisted, the split remains closed. Quality control throughout the extrusion process ensures uniform thickness for the entire run length.  Polyethylene Split Loom Tubing Has Become One of The Most Popular Conduits for Holding Groups of Wires in Position and Protecting the Wires Against Abrasion or Crushing. Our Braided Cable Sleeping Wrap is Resistant to Various Abrasions, reduces damage, Suitable for Various Electric insulations, Efficiently Arranges and protects the Cables, ensures the Cable Management is neat and Clean/Insulation Sealing Wear-Resistant General Feature: • Color: Black • Materials: Polyethylene • Operating Temperature Range: -40˚ To 200˚F (-40˚C To 93˚C) • Our wire loom is made of 100% new and high-quality polyethylene • The Split That Runs Along the Whole Length of The Loom Makes Wire Insertion Easy, and Once the Wire Run Is Inserted, The Split Remains Closed. • Perfect for Holding Groups of Wires in Position and Protecting the Wires Against Abrasion or Crushing. • Ideal for Various Automotive, Home, Marine, Industrial Wiring Applications, Etc. … • Ribbed Design Allows for A Flexible Tube That Is Easy to Install • Practical Design The Split That Runs Along the Whole Length of The Loom Makes Wire Insertion Easy, and Once the Wire Run Is Inserted, The Split Remains Closed • When Bent or Twisted, The Split Remains Closed • Resistant to Abrasion, Gasoline, Oil, And Many Other Chemicals • Great for Wrapping Power/Ground Cable • Protect Cables from Wear & High Temperature • Prolong the Service Life of The Cable • Very Easy to Bend • Very High Abrasion, Impact, and Shock Resistance  • Flexible Ribbed Tube Design for clean and easy installation • Oil, Gasoline, and abrasion-resistant  • High Flexibility & Fatigue Life, allows for A Flexible Tube That is Easy to bend and install • Our split loom is split and easy to put wires in. • Our split loom tubing is thick enough to provide complete protection for the wires • Our split wire loom is used to protect electrical wiring in industry, automotive, home & office  • Our wire loom tubing is resistant to abrasion & harmful chemicals. Good chemical stability  • Our wire protector tubing is used to wrap wires and make cables neat and orderly Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.