ART Audio (7)

ART Audio P16 Rackmount 16-Ch Balanced XLR Patch Bay Passive Interface PatchbayIdeal for any live PA rack, studio rack, or fixed installation where easy access to XLR inputs are required, the P16 brings all rear-mounted XLR inputs from various devices to one, convenient single space rack-mountable location. The P16 saves wear and tear on the connectors of expensive audio equipment by bringing all commonly used connections to the external patch bay.All-steel chassis, black anodized finish, and secure, high-quality XLR connections front and back with internal connections made via PCB wiring ensure long-term reliability from the passive ART P-16 Balanced XLR rackmount patch bay.General Features: 16 channels of balanced direct signals High-quality passive interface XLR connectors (female on the front, male on rear) All connections made via reliable PCB wiring 19-inch 1U-high rack mount with rugged fully shielded black all-steel enclosure Reversible rack ears for added system flexibility Three-year warranty ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

ART Audio P16 Rackmount 16-Ch Balanced XLR Patch Bay Passive Interface PatchbayIdeal for any live PA rack, studio rack, or fixed installation where easy access to XLR inputs are required, the P16 brings all rear-mounted XLR inputs from various devices to one, convenient single space rack-mountable location. The P16 saves wear and tear on the connectors of expensive audio equipment by bringing all commonly used connections to the external patch bay.All-steel chassis, black anodized finish, and secure, high-quality XLR connections front and back with internal connections made via PCB wiring ensure long-term reliability from the passive ART P-16 Balanced XLR rackmount patch bay.General Features: 16 channels of balanced direct signals High-quality passive interface XLR connectors (female on the front, male on rear) All connections made via reliable PCB wiring 19-inch 1U-high rack mount with rugged fully shielded black all-steel enclosure Reversible rack ears for added system flexibility Three-year warranty ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

ART PS4x4PROUSB Power Distribution System 1800W 1U Rack Mountable You are presenting the 4×4 PRO SERIES Power Distribution Systems from ART. Built on the foundation of the popular 4x4s, the PRO SERIES are durably constructed, reliable power conditioners for use in many applications. Wherever a power management system is required, the 4×4 PRO SERIES provide the surge protection to keep your rack safe from unwanted disruption.All PRO SERIES models have an additional internal discrete module called APF™ (Advanced Power Filtering), which filters out digital and dimmer hash as well as any high-frequency noise above the audio range. Some off-the-shelf add-on modules saturate and lose their filtering effectiveness as the load increases, but by using a high-power discrete design, we were able to create a filter that stays effective over the full operating range.By using both Common Mode and Differential Mode topologies in series for the filter design, we can block virtually all unwanted noise between the AC line and the ground and the two sides of the AC line. This has the additional benefit of reducing ground loop problems in your system. High-frequency noise currents, in particular, are highly attenuated in both directions so that any line noise that could be generated by one of your components is not allowed to get back into your main A.C. wiring so if you use several PRO-SERIES Power Conditioners in your setup, you can distribute and isolate the noisy components from the sensitive components in your system. Additionally, any signals above 10kHz are filtered from the line with over 40dB of attenuation above 100kHz and beyond.General Features: Designed with a power capacity of 1800 watts surge/spike protection APF with EMI & RFI filtering Front-mounted unswitched power outlet and an adjustable rear-mounted gooseneck light source for bright illumination behind the rack Spacing and alignment of the rear outlets to accommodate various size power plugs and AC adapters Features ART’s “4×4” distribution on the back of the unit – four of the eight rear outputs are 1.25 inches apart. This allows the user to plug in wide power cables and multiple wall wart devices and still have eight total power outlets to choose from Surge and spike protection system, designed to protect powered equipment from harmful electric surges and spikes RFI and EMI filtering 15 amp breaker, and a total power capacity of 1800 watts front-located on/off power switch (which lights up when turned on), and a front-mounted circuit breaker reset switch Rugged, all-steel chassis occupies 1U rack spaces and is intended for installation into standard 19″ equipment racks Applications for the PS 4×4 include Live Sound Systems/PA, Permanent or Fixed Installations, Church, Club, and Practice PA Systems, DJ Sound Systems, Home and Project Recording Systems, and Monitor Systems One-year warranty Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ART PS4x4PROUSB Power Distribution System 1800W 1U Rack Mountable Presenting the 4×4 PRO SERIES Power Distribution Systems from ART. Built on the foundation of the popular 4x4s, the PRO SERIES are durably constructed, reliable power conditioners for use in many applications. Wherever a power management system is required, the 4×4 PRO SERIES provide the surge protection you need to keep your rack safe from unwanted disruption.All PRO SERIES models have an additional internal discrete module called APF™ (Advanced Power Filtering) which filters out digital and dimmer hash as well as any high-frequency noise that is above the audio range. Some off-the-shelf add-on modules saturate and lose their filtering effectiveness as the load increases, but by using a high power discrete design we were able to create a filter that stays effective over the full operating range.By using both Common Mode and Differential Mode topologies in series for the filter design, we can block virtually all of the unwanted noise between the AC line and ground and the two sides of the AC line. This has the additional benefit of reducing ground loop problems in your system. High-frequency noise currents, in particular, are highly attenuated in both directions so that any line noise that could be generated by one of your components is not allowed to get back into your main A.C. wiring so if you use several PRO-SERIES Power Conditioners in your setup, you can distribute and isolate the noisy components from the sensitive components in your system. Additionally, any signals above 10kHz are filtered from the line with over 40dB of attenuation above 100kHz and beyond.General Features: Designed with a power capacity of 1800 watts surge/spike protection APF with EMI & RFI filtering Front-mounted unswitched power outlet and an adjustable rear-mounted gooseneck light source for bright illumination behind the rack Spacing and alignment of the rear outlets to accommodate various size power plugs and AC adapters Features ART’s “4×4” distribution on the back of the unit – four of the eight rear outputs are 1.25 inches apart. This allows the user to plug in wide power cables and multiple wall wart devices and still have eight total power outlets to choose from Surge and spike protection system, designed to protect powered equipment from harmful electric surges and spikes RFI and EMI filtering 15 amp breaker, and a total power capacity of 1800 watts front-located on/off power switch (which lights up when turned on), and a front-mounted circuit breaker reset switch Rugged, all-steel chassis occupies 1U rack spaces and is intended for installation into standard 19″ equipment racks Applications for the PS 4×4 include Live Sound Systems/PA, Permanent or Fixed Installations, Church, Club, and Practice PA Systems, DJ Sound Systems, Home and Project Recording Systems, and Monitor Systems One-year warranty Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ART PS4x4 Power Distribution System 1800W 1U Rack Mountable Presenting the 4×4 PRO SERIES Power Distribution Systems from ART. Built on the foundation of the popular 4x4s, the PRO SERIES are durably constructed, reliable power conditioners for use in many applications. Wherever a power management system is required, the 4×4 PRO SERIES provide the surge protection you need to keep your rack safe from unwanted disruption.All PRO SERIES models have an additional internal discrete module called APF™ (Advanced Power Filtering) which filters out digital and dimmer hash as well as any high-frequency noise that is above the audio range. Some off-the-shelf add-on modules saturate and lose their filtering effectiveness as the load increases, but by using a high power discrete design we were able to create a filter that stays effective over the full operating range.By using both Common Mode and Differential Mode topologies in series for the filter design we are able to block virtually all of the unwanted noise that is between the AC line and ground, and also the two sides of the AC line. This has the additional benefit of reducing ground loop problems in your system. High-frequency noise currents, in particular, are highly attenuated in both directions so that any line noise that could be generated by one of your components is not allowed to get back into your main A.C. wiring so if you use a number of PRO SERIES Power Conditioners in your setup, you can distribute and isolate the noisy components from the sensitive components in your system. Additionally, any signals above 10kHz are filtered from the line with over 40dB of attenuation above 100kHz and beyond.General Features: Designed with a power capacity of 1800 watts surge/spike protection APF with EMI & RFI filtering Front-mounted unswitched power outlet and an adjustable rear-mounted gooseneck light source for bright illumination behind the rack Spacing and alignment of the rear outlets to accommodate various size power plugs and AC adapters Features ART’s “4×4” distribution on the back of the unit – four of the eight rear outputs are 1.25 inches apart. This allows the user to plug in wide power cables and multiple wall wart devices, and still have eight total power outlets to choose from Surge and spike protection system, designed to protect powered equipment from harmful electric surges and spikes RFI and EMI filtering 15 amp breaker, and a total power capacity of 1800 watts front-located on/off power switch (which lights up when turned on), and a front-mounted circuit breaker reset switch Rugged, all-steel chassis occupies 1U rack spaces and is intended for installation into standard 19″ equipment racks Applications for the PS 4×4 include: Live Sound Systems/PA, Permanent or Fixed Installations, Church, Club and Practice PA Systems, DJ Sound Systems, Home and Project Recording Systems, and Monitor Systems One-year warranty ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov