Car Factory Radio Sound Processors (6)

 Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system & ACR-1 Dash Remote The LC2i is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality preamp signals that can then be directed to after-market processors and amplifiers. As a result, users can enjoy maximum sound quality while maintaining factory volume and steering wheel controls. General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete-level controls GTO - Signal sensing inputs The 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt preamp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) The LC2i Specifications Maximum speaker level input: 400 watts per channel Maximum Preamp Output: 9.5Vrms / 13V peak Optional Dash Level Control Remote: +0dB / -19dB Frequency response: 10 Hz - 100,000 Hz; ±1dB Total harmonic distortion: 0.01% Signal to Noise ratio: >110dB Input Impedance: 20K ohms Output Impedance: 150 ohms Power draw: 150 mA Recommended fuse rating: 1 Amp Weight: 1 pound What is in the package: LC2i owner's manual Two-Channel line-output converter Quality Control Certificate AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the ACR-1package: ACR-1 owner's manual Remote dash mount control 20' RJ-14 cable ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

  Hifonics BXIPRO1.5 Bass Enhancer Processor with Dash Mount Remote Control Hifonics BXIPRO1.5 Bass Enhancer Processor with Dash Mount Remote Control   General Features:   BXiPro Bass Enhancer Processor with Dash Mount Remote Control Enhances and restores the bass level Screw in power and speaker connecters to chassis for secure connections that prevent disconnection Dual function bass remote Remote wire input, DC sense and music sense turn on Input and output signal clip indicators Mono adjustable output level (can be controlled by bass remote) 48v high level inputs Ability to use test tones to set input and output levels Fine tuning adjustability using bass width and sweep Fixed 4v full range output Small profile Tiffany style RCA connectors Low and high level audio inputs (speaker level inputs) Balanced differential inputs (for noise reduction) Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

  Rockford Fosgate DSR1 8-Channel Digital Signal Processor Rockford Fosgate DSR1 Digital signal processor with Maestro AR amp replacement module adds an aftermarket amp without losing important features. Upgrade your system Your car computer controls its audio system, so upgrading the sound has to include integrating it with your car's digital network. Rockford Fosgate's DSR1 combines an integration module with a full-featured digital signal processor so you can add an aftermarket amplifier without losing any of your factory controls or audio notifications and achieve the high-fidelity sound the system lacked. A simpler way In the past, in order to upgrade a factory system, you'd have first to sum all the outputs, reduce the signal strength to line level, remove the factory EQ and crossover settings, and then apply your custom audio processing and amplification. The DSR-1 simplifies this process by using the unprocessed line-level signals from the factory receiver, so you can tune the sound without fighting the factory settings. Your factory radio still works like it always has, and you retain all your vehicle's features. Rockford Fosgate + iDatalink Maestro = good times The DSR1 includes an iDatalink Maestro AR amplifier replacement module, which can use a vehicle-specific T-harness (sold separately) to supply a clean audio signal plus digital control data to the processor. Using a Windows PC, you go to iDatalink's website and download the firmware for your specific vehicle to your DSR1. It will then be able to translate your vehicle's digital instructions, like turning down the music and making only one speaker active during Bluetooth calls, for example. Fine-tune your sound via your mobile device The DSR1 uses the same technology as Rockford Fosgate's 3Sixty.3 digital signal processor to help you obtain and enjoy amazing sound quality from your vehicle's sound system. After connecting — via Bluetooth to an iOS or Android device — and loading the PerfectTune app, the main user interface screen displays your speaker configuration, an EQ graph, the EQ controls, and more. Eight channels handle almost any system Each channel has its own crossover network, level adjustment, time alignment setting, polarity switch, and 31 bands of equalization, so there's no excuse for anything but perfect sound. The DSR1 offers eight output channels of processed signal for your amplifiers to send on to your tweeters, speakers, and subs. Note: The DSR1 bypasses all factory amplification—compatible aftermarket amplifiers are required.Important Note: This Rockford Fosgate processor can either be used with an iDatalink harness in "Vehicle-specific" mode, or it can operate without needing a vehicle-specific harness in "Universal" mode when upgrading a standard, non-premium factory, or aftermarket system. See "Configuration Menu" under the Details tab for more information. General Features : digital signal processor with factory digital amplifier replacement module add an aftermarket amplifier without losing any factory controls or audio notifications requires Windows PC with an internet connection to download vehicle-specific firmware to the module includes iDatalink Maestro AR interface to retain factory premium audio features works with an optional vehicle-specific T-harness (sold separately) supplies control data as well as audio preamp and speaker-level inputs for use with a non-premium system and no vehicle-specific harness Digital Processing: digital processing technology from Rockford Fosgate's 3Sixty.3 processor digital processing: 147 MIPS speed, 32-bit precision, 72-bit accumulators analog to digital: 24-bit precision, 105 dB dynamic range, -98 dB THD+N digital to analog: 24-bit precision, 108 dB dynamic range, -98 dB THD+N settings and adjustments made via Bluetooth connection to an iOS or Android device running the PerfectTune app Eight assignable inputs Four auxiliary RCA and one optical TOSLINK (S/PDIF) inputs Eight preamp outputs (up to 4 volts) 31-band parametric EQ on all channels crossover filters can be set as all-pass, high-pass, low-pass, bandpass, high-shelf, or low-shelf filters selectable slopes and filter characteristics phase switch on every channel dimensions: 5-1/16"W x 1-1/4"H x 4"W warranty: 1 year Digital signal processor 7" micro USB-to-USB cable 18-pin input harness 16-pin output harness Quick-start guide ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

AudioControl DQDX Black 6 Channel Performance Digital Signal Processor Designed for maximum sound quality & enhanced audio performance, the DQDX is the latest AudioControl processor to incorporate Signal Delay. This process corrects for the varying speaker locations in the vehicle. Putting the driver in perfect acoustical alignment definitely has its challenges in a vehicle. In-home audio it is generally pretty easy to just move a speaker forward or backward or to the left or to the right to help make sure you hear both speakers at the same time. In a vehicle, we are typically stuck with the speaker locations that the vehicle manufactures have supplied us with. This usually creates a whole slew of issues when you add amplifier power, new speakers, and subwoofers. This is why signal delay and equalization are so critical. Equalization helps match all your new components together so they sound great and signal delay helps all that great sound arrive at you, the driver at the same time! Designed for maximum sound quality and enhanced audio performance, the DQDX is the latest AudioControl processor to incorporate Signal Delay. This process corrects for the varying speaker locations in the vehicle. The AudioControl DQDX lets music enthusiasts truly “take control” of their sound and receive an amazing experience. General Features: black 6-channel digital sound processor with EQ, crossover, and signal delay 24 dB/octave Linkwitz-Riley crossover selectable crossover frequency: 50-500 Hz separate 7-band graphic EQ for front/rear/subwoofer front/rear/subwoofer level matching with input/output level controls L/R: 10ms Front/sub: 35ms high voltage line driver (maximum output level: 7.5Vrms ACR-3 Dash Control Remote included 12-volt 1-amp turn-on lead output frequency response: 10-22,000 Hz recommended fuse: 2-amp dimensions: 10-1/4"W x 1-3/8"H x 6-1/4"D weight: 3 lbs. warranty: 5 years What is in the DQDX package: 6-Channel DSP/Equalizer/Crossover ACR-3 wired remote control 19.5' Remote cable (RJ-14 plug on both ends) Owner's manual QC checklist Quick reference card ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

AudioControl DQDX Black 6 Channel Performance Digital Signal Processor Designed for maximum sound quality & enhanced audio performance, the DQDX is the latest AudioControl processor to incorporate Signal Delay. This process corrects for the varying speaker locations in the vehicle. Putting the driver in perfect acoustical alignment definitely has its challenges in a vehicle. In-home audio it is generally pretty easy to just move a speaker forward or backward or to the left or to the right to help make sure you hear both speakers at the same time. In a vehicle, we are typically stuck with the speaker locations that the vehicle manufactures have supplied us with. This usually creates a whole slew of issues when you add amplifier power, new speakers, and subwoofers. This is why signal delay and equalization are so critical. Equalization helps match all your new components together so they sound great and signal delay helps all that great sound arrive at you, the driver at the same time! Designed for maximum sound quality and enhanced audio performance, the DQDX is the latest AudioControl processor to incorporate Signal Delay. This process corrects for the varying speaker locations in the vehicle. The AudioControl DQDX lets music enthusiasts truly “take control” of their sound and receive an amazing experience. General Features: black 6-channel digital sound processor with EQ, crossover, and signal delay 24 dB/octave Linkwitz-Riley crossover selectable crossover frequency: 50-500 Hz separate 7-band graphic EQ for front/rear/subwoofer front/rear/subwoofer level matching with input/output level controls L/R: 10ms Front/sub: 35ms high voltage line driver (maximum output level: 7.5Vrms ACR-3 Dash Control Remote included 12-volt 1-amp turn-on lead output frequency response: 10-22,000 Hz recommended fuse: 2-amp dimensions: 10-1/4"W x 1-3/8"H x 6-1/4"D weight: 3 lbs. warranty: 5 years What is in the DQDX package: 6-Channel DSP/Equalizer/Crossover ACR-3 wired remote control 19.5' Remote cable (RJ-14 plug on both ends) Owner's manual QC checklist Quick reference card ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

AudioControl DQDX Black 6 Channel Performance Digital Signal Processor Designed for maximum sound quality & enhanced audio performance, the DQDX is the latest AudioControl processor to incorporate Signal Delay. This process corrects for the varying speaker locations in the vehicle. Putting the driver in perfect acoustical alignment definitely has its challenges in a vehicle. In-home audio it is generally pretty easy to just move a speaker forward or backward or to the left or to the right to help make sure you hear both speakers at the same time. In a vehicle, we are typically stuck with the speaker locations that the vehicle manufactures have supplied us with. This usually creates a whole slew of issues when you add amplifier power, new speakers, and subwoofers. This is why signal delay and equalization are so critical. Equalization helps match all your new components together so they sound great and signal delay helps all that great sound arrive at you, the driver at the same time! Designed for maximum sound quality and enhanced audio performance, the DQDX is the latest AudioControl processor to incorporate Signal Delay. This process corrects for the varying speaker locations in the vehicle. The AudioControl DQDX lets music enthusiasts truly “take control” of their sound and receive an amazing experience. General Features: black 6-channel digital sound processor with EQ, crossover, and signal delay 24 dB/octave Linkwitz-Riley crossover selectable crossover frequency: 50-500 Hz separate 7-band graphic EQ for front/rear/subwoofer front/rear/subwoofer level matching with input/output level controls L/R: 10ms Front/sub: 35ms high voltage line driver (maximum output level: 7.5Vrms ACR-3 Dash Control Remote included 12-volt 1-amp turn-on lead output frequency response: 10-22,000 Hz recommended fuse: 2-amp dimensions: 10-1/4"W x 1-3/8"H x 6-1/4"D weight: 3 lbs. warranty: 5 years What is in the DQDX package: 6-Channel DSP/Equalizer/Crossover ACR-3 wired remote control 19.5' Remote cable (RJ-14 plug on both ends) Owner's manual QC checklist Quick reference card ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov