Car Bass Restoration & Expanders (41)

Cerwin-Vega CVM1 Digital Bass Reconstruction Processor, Epicenter Enhancer, Equalizer The CVM1 is the most potent bass component. This device has several different bass output selections—the Cerwin-Vega Mobile CVM1 for your car audio system. The Cerwin Vega Mobile CVM1 Digital Bass Processor is designed and engineered to reproduce extreme bass in your vehicle! The authorized Cerwin-Vega Mobile dealers can help guide you with various installation applications and technical information to customize your sound system according to your listening preference. It is highly recommended that you have your new CVM1 installed by an authorized Cerwin-Vega Mobile dealer to ensure you receive the ultimate listening experience! General Features: Vega Series Digital Car Audio Bass Enhancer 15V RMS Maximum Input Level 13.2V Peak Maximum Output Level Bass Driver Bass Equalization Circuit Dash Mount Remote Control Bass Maximizer Indicator PFM Subsonic Filter Switch Bass Output Control Frequency Response: 10 – 30 KHz Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin-Vega CVM1 Digital Bass Reconstruction Processor, Epicenter Enhancer, Equalizer The CVM1 is the most potent bass component. This device has several different bass output selections—the Cerwin-Vega Mobile CVM1 for your car audio system. The Cerwin Vega Mobile CVM1 Digital Bass Processor is designed and engineered to reproduce extreme bass in your vehicle! The authorized Cerwin-Vega Mobile dealers can help guide you with various installation applications and technical information to customize your sound system according to your listening preference. It is highly recommended that you have your new CVM1 installed by an authorized Cerwin-Vega Mobile dealer to ensure you receive the ultimate listening experience! General Features: Vega Series Digital Car Audio Bass Enhancer 15V RMS Maximum Input Level 13.2V Peak Maximum Output Level Bass Driver Bass Equalization Circuit Dash Mount Remote Control Bass Maximizer Indicator PFM Subsonic Filter Switch Bass Output Control Frequency Response: 10 – 30KHz Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Axxess AX-BRC-PRO BASS ENHANCEMENT PROCESSOR, 2CH INPUT LOC, BUILT IN LINE DRIVER This active loudspeaker with a bass enhancement processor features cutting-edge technology to enhance the sound of your audio system, capturing the full range of deep tones within your music. This device seamlessly integrates into your vehicle’s factory audio system, preserving the original aesthetics while effortlessly breathing new life into your favorite tracks. It scans the incoming audio signal from your radio to replace low-frequency information that is lost in compressed music, such as missing bass tones. It then increases bass response accordingly, thanks to a built-in line driver. This groundbreaking audio enhancement takes your in-car audio experience to a whole new level. Adaptive activation modes allow users to choose between a traditional 12-volt remote trigger, the simplicity of DC offset, or audio-sensing activation for ultimate customization. This active LOC features a programmable subsonic harmonizer that filters out subsonic noise, protecting your speakers while enhancing overall clarity. High-voltage output settings unleash the full potential of an audio system, providing an impressive 10-volt output voltage. Installers have complete control over their audio experience using the included remote that adjusts bass enhancement levels and output volumes with the touch of a button. Users can tailor their audio experience with precision using this active LOC’s built-in load resistor settings, which seamlessly match the requirements of OE equipment. Whether installed with a high-end OE system or a standard radio and amplifier, this technology enables users to fine-tune the characteristics for optimal sound reproduction. This device’s precision bass sculpting technology was crafted by audio engineers to elevate car audio by finely tuning low-frequency responses, injecting life into every bass note, and delivering a profound, resonating impact you can feel. General Features: Effect, width, and frequency controls to customize the bass Variable subsonic filter Multi-function remote included Adjustable total output levels Adjustable dynamic bass effect Use as a converter or a line driver Differential balanced inputs for superior sound Low-impedance outputs for distortion-free sound Selectable 20-ohm, 60-ohm, and 20k-Ohm OEM load options Easy installation with 12-volt remote output Remote Output Rating 500mA Locking detachable terminals ensure secure connections Easily accessible panel-mount RCA jacks Compact and durable aluminum chassis Detachable mounting tabs for flexible installation Selectable GND, ISO, and 200-ohm ground isolation options Selectable AUDIO, DC, and REM turn-on modes 1-year warranty Universal applications Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Axxess AX-LOC4.4-PRO 4CH Active Line Output Converter with Bass Boost This 4-channel Active LOC with Bass Boost from Axxess has universal applications, enabling installers to add aftermarket amplifiers to OEM source units for enhanced sound quality. This advanced technology features incredible input power capabilities, a load selector, a clip indicator, enhanced output controls, and noise isolation countermeasures. Add the AX-RM1 external bass knob for additional subwoofer adjustments. This supplemental product will directly plug into the Axxess PRO series LOCs and Line driver. General Features: 4-channel: 4 in, four out Line driver Max input level: 40V / 400W @20K Ohm Operating voltage: 9V-16V Trigger selection: REM / DC / AUDIO Remote Output Rating 500mA Turn on trigger (DC): 3V-7V Output max @13.8V: 9.5V RMS Input impedance selection: 20 / 60 / 20k Ohm Ground selection: GND / ISO / 200 Ohm Independent Front/Rear Gain adjustment: – 28dB to +1dB Input sensitivity: 0.5V-20V Signal to noise: >110dB @6.4V output THD+N (Total Harmonic Distortion): <0.01% Frequency response: 20Hz-20kHz Low pass filter: <250Hz (rear channels) Bass Boost: 0dB + 12dB (rear channels) Remote control: optional AX-RM1 Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Axxess AX-BXLOC2 4CH Active Line Output Converter with Bass Restoration The AX-BXLOC2 from the Axxess BX Series prevents factory audio systems from regulating lower frequencies and reducing the output of bass frequencies as the volume increases. A Bass-X restoration circuit in the LOC allows users to enjoy their music as it was recorded while maintaining the use of factory volume and steering wheel controls. This compact line output converter with active input circuitry accepts speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. They convert them to high-quality preamp signals that can be directed to aftermarket amplifiers. A bass remote control with a digital voltmeter is also included to help prevent equipment damage. As some factory radios or amplifiers stop passing audio when OE speakers are disconnected, Axxess load resistors may be required when installing the AX-BXLOC2. General Features: 4-channel: 2 in, 4 out Max input level: 40V / 400W @20K Ohm Operating voltage: 9V-16V Trigger selection: REM Remote Output Rating 500mA Turn on trigger (DC): 3V-7V Output max @13.8V: 9.5V RMS Input impedance selection: recommended: AX-LR20 / AX-LR39 / AX-LR60 Gain adjustment: – 28dB to +1dB Input sensitivity: 0.5V-20V Signal to noise: >110dB @6.4V output THD+N (Total Harmonic Distortion): <0.01% Frequency response: 20Hz-20kHz Bass boost: 0dB + 12dB Plug-n-play remote bass knob with voltmeter included Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Axxess AX-BXLOC2-PRO 4CH Active Line Output Converters with Bass Restoration + Bass Boost The AX-BXLOC2-PRO from Axxess prevents factory audio systems from regulating lower frequencies and reducing the output of bass frequencies as the volume increases. A Bass-X restoration circuit in the LOC allows users to enjoy their music as it was recorded while maintaining the use of factory volume and steering wheel controls. This compact line output converter with active input circuitry accepts speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. They convert them to high-quality preamp signals that can be directed to aftermarket amplifiers. Unfortunately, some factory radios or amplifiers stop passing audio when OE speakers are disconnected – the AX-BXLOC2-PRO fixes this problem with built-in load resistors. A bass remote control with a digital voltmeter is also included to help prevent equipment damage. General Features: 4-channel: 2 in, 4 out Max input level: 40V / 400W @20K Ohm Operating voltage: 9V-16V Trigger selection: REM / DC / AUDIO Remote Output Rating 500mA Turn on trigger (DC): 3V-7V Output max @13.8V: 9.5V RMS Input impedance selection: 20 / 60 / 20k Ohm Ground selection: GND / ISO / 200 Ohm Gain adjustment: – 28dB to +1dB Input sensitivity: 0.5V-20V Signal to noise: >110dB @6.4V output THD+N (Total Harmonic Distortion): <0.01% Frequency response: 20Hz – 20kHz Bass boost: 0dB + 12dB Built-in load resistors Plug-n-play remote bass knob with voltmeter included Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Axxess AX-LOC2.4-PRO 4CH Active Line Output Converter with Bass Boost This 4-channel Active LOC with Bass Boost from Axxess has universal applications, enabling installers to add aftermarket amplifiers to OEM source units for enhanced sound quality. This advanced technology features incredible input power capabilities, a load selector, a clip indicator, enhanced output controls, and noise isolation countermeasures. Add the Axxess AX-RM1 external Bass knob for additional subwoofer adjustments. This supplemental product will directly plug into the Axxess PRO series LOCs and line driver. General Features: 4-channel: 2 in, 4 out Max input level: 40V / 400W @20K Ohm Operating voltage: 9V-16V Optional PR-RM-1 Trigger selection: REM / DC / AUDIO Remote Output Rating 500mA Turn on trigger (DC): 3V-7V Output max @13.8V: 9.5V RMS Input impedance selection: 20 / 60 / 20k Ohm Ground selection: GND / ISO / 200 Ohm Independent Front/Rear Gain adjustment: – 28dB to +1dB Input sensitivity: 0.5V-20V Signal to noise: >110dB @6.4V output THD+N (Total Harmonic Distortion): <0.01% Frequency response: 20Hz – 20kHz Low pass filter: <250Hz (rear channels) Bass boost: 0dB + 12dB (rear channels) Remote control: optional AX-RM1 Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine RUX-KNOB.2 Remote Bass Knob for Alpine Amplifiers Product highlights Backwards compatible with amps that use RUX-KNOB Works with X-A70F Adjusts gain from 0 to -12 dB Easily adjust the bass gain of your amp while seated inside 16-1/2" (5 meters) Connection cable General Features: Alpine RUX-KNOB.2 Remote bass knob for select Alpine amplifiers 16-1/2" (5 meters) Connection cable 20dB of linear adjustment range Compatible with 3-channel mode on select 4-channel amplifiers Plugs directly in for quick, direct subwoofer control Backwards compatible with amps that use RUX-KNOB Easily adjust the bass gain of your amp while seated inside Control multiple amps from just one RUX-KNOB.2 controller Works with Alpine X-A70F, Alpine MRV-M500, Alpine PDX-V9, Alpine X-A70F, Alpine X-A90V, Alpine X-A90M Also works with: MRVM1200, MRVM250, PWAS10v, KTP-190U, MRX-50, MRX-M100, MRX-V60, PDX-M12, PDX-M6, PDR-M65 Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega CVM0 Digital BASS Booster Epicenter BX10 W Remote Bass Knob Control The CVM0 is the most powerful bass component. This device is equipped with several different bass output selections. The Cerwin-Vega Mobile CVM0 for your car audio system. The Cerwin Vega Mobile CVM0 Digital Bass Processor is designed and engineered to reproduce extreme bass in your vehicle! The authorized Cerwin Vega Mobile dealers can help guide you with various installation applications and technical information to customize your sound system according to your listening preference. It is highly recommended that you have your new CVM0 installed by an authorized Cerwin Vega Mobile dealer to ensure that you receive the ultimate listening experience! General Features: 15V RMS Maximum Input Level 13.2V Peak Maximum Output Level Bass Driver Bass Equalization Circuit Dash Mount Remote Control Bass Maximizer Indicator PFM Subsonic Filter Switch Bass Output Control Frequency Response: 10 – 30KHz Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Absolute BXPRO2 Digital Bass Maximizer Processor with Dash Mount Remote Control & Absolute KIT4 4Gauge Amp Kit The Absolute BXPRO2 is one of the finest and most accurate bass-enhancing and restoration systems today! Enhance your listening experience with a device with several different bass output selections. The DBM-800 was also developed to restore low frequencies lost during the recording process so that your sound will always sound clean. For your convenience, there is a dash-mounted level control unit that permits instant adjustments for your passengers who are not as much of a "bass-head" as you or whenever you need to turn it down just a little bit. General Features: Digital bass maximizer  and bass restoration processor with dash mount remote control Bass restoration lighted display, Max bass control designed to work with aftermarket and factory systems The bass output control circuit allows the unit to maximize the bass output of any audio system while restraining destructive bursts PFM Subsonic filter control to fine-tune the bass response Bass maximizer indicator, bass output control Balanced inputs, bass output control selectable grounding mode (balanced or unbalanced) Subsonic filter and bass level control preamp and speaker-level inputs switchable Programmable Frequency Match This universal product works with all Car Audio equipment such as Absolute, Cerwin Vega, Alpine, Kicker, Kenwood, Pioneer, Sony, JVC, etc. Bass Restoration Lighted Display Blue illuminated controls Parametric bass equalization The efficient bass equalization circuit 13.5V Max output level Frequency response: 10Hz - 10000Hz Balance input noise rejection: 60 dB Total harmonic distortion: 0.003%, S/N:130 dB Authorized Internet Dealer 1-year Manufacturer's warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.