4" Car Speakers (37)

Crunch Ground Pounder CS4CX 200W 4" 2-Way CS Series Coaxial Car Speakers  Item Description 4" CS Series 2-Way Car Speakers Power Handling: Silver alpha cellulose cones Moisture-resistant rubber surround Neo mylar soft dome tweeter 4 ohms impedance Sensitivity: 88dB Spade speaker terminals for easy installations Anti-resonant stamped steel basket for improved performance Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

One Pair Rockford Fosgate Prime R14X2 120W Peak 4" 2-Way PRIME Series Coaxial Car Audio Speakers The R14X2 is a 4” 2-way full-range speaker rated at 30 watts RMS for a new generation of factory replacement speakers. Kit includes two speakers with grilles, integrated high-pass crossovers, and mounting hardware. The 4" Prime full-range speakers offer Rockford Fosgate sound quality at a fantastic value. Perfect for replacing factory speakers, they feature polypropylene cones and a silk dome tweeter. Includes grilles so they look as good as they sound. General Features: 4" 2-Way PRIME Series Coaxial Speakers Power Handling: Peak: 120 watts per pair / 60 watts each Power Handling: RMS: 60 watts per pair / 30 watts each Recommended power range: 5 - 30 watts RMS per channel Polypropylene mid-woofer cone material Rubber speaker surround CEA-2031 compliant speakers 1/2" Silk balanced dome tweeter Stamped steel basket 4 ohms impedance Integrated crossover system for tweeter protection Protective grilles and mounting hardware are included Klippel verification optimized components for the best possible performance Frequency Response: 100-20,000 Hz Top-mount Depth: 1-3/4" Sensitivity: 85dB Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Rockford Fosgate R14X2 owner's manual Two 4" Two-way speakers 2 Grilles Two 15' Lengths of speaker wire (each has female quick-slides on one end and tinned bare wire on the other) Eight 1-1/4" Screws 8 Speed clips Installation/Operation manual (English/ French/ Spanish/ German/ Italian) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca

Alpine EV-40MR-T 4" Rear Door/Deck/Hatch Speaker Set Compatible Fit 17-24 Model 3 & 20-24 Model Y & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle Enhance your Tesla’s rear soundstage with the Alpine EV-40MR-T, a premium 4" rear speaker set engineered for seamless integration and superior audio performance. Designed for Model 3 and Model Y, these speakers bring clear, balanced sound to the rear doors, rear deck, or rear hatch. Tuned for Tesla’s Acoustic Environment The EV-40MR-T is specifically tuned to complement Tesla’s cabin acoustics, ensuring an immersive and well-balanced listening experience. Whether installed in the rear doors, deck, or hatch, these speakers provide a rich, dynamic sound that enhances your overall driving experience. Effortless Plug-and-Play Installation Designed for Tesla Model 3 (2017-2024) and Model Y (2020-2024), the EV-40MR-T features a direct-fit design with Tesla-specific connectors, making installation simple and non-invasive. No modifications are required for most vehicles, preserving Tesla’s clean, factory aesthetic. Premium Audio Performance Built with Alpine’s hybrid carbon fiber cone and proprietary H.A.M.R. (High Amplitude Multi-Roll) surround technology, the EV-40MR-T delivers accurate midrange frequencies with enhanced durability. The speakers provide distortion-free, detailed sound reproduction for a more enjoyable audio experience. Durability Meets High-Quality Sound Constructed with premium materials, including strontium ferrite magnets and hybrid carbon fiber cones, these speakers are designed for long-term reliability and outstanding audio clarity. Whether you’re on a short commute or a long road trip, you’ll enjoy consistently high-quality sound performance. General Features: Direct-fit speaker upgrade for Tesla Model 3 (2017-2024) and Model Y (2020-2024) Replaces factory rear door, rear deck, or rear hatch speakers Plug-and-play installation with Tesla-specific connectors Stealth integration with no visible modifications Tuned specifically for Tesla’s unique cabin acoustics Includes (2) 4" midrange speakers with strontium ferrite magnets Hybrid carbon fiber cone material for improved sound reproduction Alpine’s H.A.M.R. surround technology for enhanced accuracy and performance Power Handling: 40W RMS / 160W Peak Frequency Response: 90Hz - 20kHz Professional installation may be required for Model 3 vehicles without factory rear deck speakers Technical Specifications Specification Details Speaker Type 4" midrange speakers Materials Hybrid carbon fiber cone Surround Technology Alpine H.A.M.R. (High Amplitude Multi-Roll) Magnet Type Strontium Ferrite Frequency Response 90Hz - 20kHz Power Handling 40W RMS / 160W Peak Sensitivity 89 dB Impedance 4 Ohms Vehicle Compatibility 2017-2024 Tesla Model 3, 2020-2024 Tesla Model Y Installation Type Plug-and-Play (some modifications may be required for vehicles without factory rear deck speakers)   Upgrade your Tesla’s rear soundstage with Alpine’s EV-40MR-T and experience premium audio performance with a factory-fit design.

Alpine BRV-S40 4" BassRev Series 4-ohm 2-Way Coaxial Speaker Set & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle Using proprietary software technology and a powerful digital sound processor, we pushed the envelope of what’s possible in a sound system, redefining how you experience your music on the road.H.E.D.G.E. Surround – The symmetrical shape, coupled with the High Excursion Design Gathered Edge, allows the speaker to operate more symmetrically and linearly for increased output and extended low frequency.Unique Design – The unique, lapel-shaped cone allows us to achieve high cone excursion for greater motion and height compared to a traditional speaker.OPTIM Sync Technology – Using a proprietary dynamic bass boost algorithm, we can extend the bass frequency on each speaker while staying within the safe operating limits. Each speaker features a pre-EQ to enhance the tonal balance during playback.General Features:• High Excursion Design Gathered Edge (H.E.D.G.E.) rubber surround increases output and low frequency extension• Unique lapel cone shape for high excursion• OPTIM Sync Technology pre - EQ selection specific to each driver (requires 3.0 or newer update on PXE -C80-88)• Polypropylene and Mica Cone Material for increased rigidity• Ferrite magnet• Gun metal chemical topcoat for premium aestheticSYSTEM TECH SPECS:• Woofer Size: 4”• Tweeter Size: 0.75”• Maximum Peak Power: 120W• Maximum RMS Power: 40W• Frequency Response: Without BassRev 75 Hz – 20k Hz, With BassRev 67 Hz – 20k Hz• Impedance: 4Ω• Sensitivity: 84dB• 30% SPL increase for increased loudness• 25% X-Max increase for increased cone movement• Mounting Depth: 45mm (1.77”)SYSTEM COMPONENTS:• 4” Component Speaker Set• 0.75” Tweeter Set Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine BRV-S40 4" BassRev Series 4-ohm 2-Way Coaxial Speaker Set Using proprietary software technology and a powerful digital sound processor, we pushed the envelope of what’s possible in a sound system, redefining how you experience your music on the road.H.E.D.G.E. Surround – The symmetrical shape, coupled with the High Excursion Design Gathered Edge, allows the speaker to operate more symmetrically and linearly for increased output and extended low frequency.Unique Design – The unique lapeled cone shape allows us to achieve high cone excursion for more motion and height when compared to a traditional speaker.OPTIM Sync Technology – Using a proprietary dynamic bass boost algorithm, we can extend the bass frequency on each speaker while staying within the safe operating limits. Each speaker features a pre-EQ to enhance the tonal balance during playback.General Features:• High Excursion Design Gathered Edge (H.E.D.G.E.) rubber surround increases output and low frequency extension• Unique lapel cone shape for high excursion• OPTIM Sync Technology pre-EQ selection specific to each driver (requires 3.0 or newer update on PXE-C80-88)• Polypropylene and Mica Cone Material for increased rigidity• Ferrite magnet• Gun metal chemical topcoat for premium aestheticSYSTEM TECH SPECS:• Woofer Size: 4”• Tweeter Size: 0.75”• Maximum Peak Power: 120W• Maximum RMS Power: 40W• Frequency Response: Without BassRev 75 Hz – 20k Hz, With BassRev 67 Hz – 20k Hz• Impedance: 4Ω• Sensitivity: 84dB• 30% SPL increase for increased loudness• 25% X-Max increase for increased cone movement• Mounting Depth: 45mm (1.77”)SYSTEM COMPONENTS:• 4” Component Speaker Set• 0.75” Tweeter Set Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine EV-40MR-T 4" Rear Door/Deck/Hatch Speaker Set Compatible Fit 17-24 Model 3 & 20-24 Model Y Enhance your Tesla’s rear soundstage with the Alpine EV-40MR-T, a premium 4" rear speaker set engineered for seamless integration and superior audio performance. Designed for Model 3 and Model Y, these speakers bring clear, balanced sound to the rear doors, rear deck, or rear hatch. Tuned for Tesla’s Acoustic Environment The EV-40MR-T is specifically tuned to complement Tesla’s cabin acoustics, ensuring an immersive and well-balanced listening experience. Whether installed in the rear doors, on the deck, or in the hatch, these speakers deliver rich, dynamic sound that enhances your overall driving experience. Effortless Plug-and-Play Installation Designed for Tesla Model 3 (2017-2024) and Model Y (2020-2024), the EV-40MR-T features a direct-fit design with Tesla-specific connectors, making installation simple and non-invasive. No modifications are required for most vehicles, preserving Tesla’s clean, factory aesthetic. Premium Audio Performance Built with Alpine’s hybrid carbon fiber cone and proprietary H.A.M.R. (High Amplitude Multi-Roll) surround technology, the EV-40MR-T delivers accurate midrange frequencies with enhanced durability. The speakers provide distortion-free, detailed sound reproduction for a more enjoyable audio experience. Durability Meets High-Quality Sound Constructed with premium materials, including strontium ferrite magnets and hybrid carbon fiber cones, these speakers are designed for long-term reliability and outstanding audio clarity. Whether you’re on a short commute or a long road trip, you’ll enjoy consistently high-quality sound performance. General Features: Direct-fit speaker upgrade for Tesla Model 3 (2017-2024) and Model Y (2020-2024) Replaces factory rear door, rear deck, or rear hatch speakers Plug-and-play installation with Tesla-specific connectors Stealth integration with no visible modifications Tuned specifically for Tesla’s unique cabin acoustics Includes (2) 4" midrange speakers with strontium ferrite magnets Hybrid carbon fiber cone material for improved sound reproduction Alpine’s H.A.M.R. surround technology for enhanced accuracy and performance Power Handling: 40W RMS / 160W Peak Frequency Response: 90Hz - 20kHz Professional installation may be required for Model 3 vehicles without factory rear deck speakers Technical Specifications Specification Details Speaker Type 4" midrange speakers Materials Hybrid carbon fiber cone Surround Technology Alpine H.A.M.R. (High Amplitude Multi-Roll) Magnet Type Strontium Ferrite Frequency Response 90Hz - 20kHz Power Handling 40W RMS / 160W Peak Sensitivity 89 dB Impedance 4 Ohms Vehicle Compatibility 2017-2024 Tesla Model 3, 2020-2024 Tesla Model Y Installation Type Plug-and-Play (some modifications may be required for vehicles without factory rear deck speakers)   Upgrade your Tesla’s rear soundstage with Alpine’s EV-40MR-T and experience premium audio performance with a factory-fit design.

2 Pair Cerwin Vega XED42 XED Series 4" 2-Way Coaxial Speakers Defy all odds and overcome budget limitations with the best-in-class XED SERIES SPEAKERS that provide quality sound reproduction without breaking the bank. Harnessed with suitable power handling capability and balanced metal dome tweeters, XED SERIES SPEAKERS offer tremendous value and sound that will be music to your ears. Specifications: SPEAKER SIZE - 4” SPEAKER TYPE - TRI AXIAL, SPEAKER TYPE - CO AXIAL OHMS (PER COIL) - 4 NUMBER OF VOICE COILS - SINGLE CONE MATERIAL - POLYPROPYLENE DIAPHRAGM MATERIAL - ALUMINIUM BASKET MATERIAL - STAMPED STEEL MAGNET TYPE - FERRITE (CERAMIC) SURROUND MATERIAL - TREATED FOAM CROSSOVER INCLUDED - YES - INTERNAL FREQUENCY RESPONSE (HZ): 70HZ-20KHZ VOICE COIL DIAMETER - INCH (MM) - 1"  POWER HANDLING RMS: 20W POWER HANDLING MAX: 150W MOUNTING DEPTH: 2.25” (57.3MM) MOUNTING DIAMETER: 3.9” (101MM) GRILL: YES Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DMDX4 DMDX SERIES 4" 2-WAY CONCENTRIC COAXIAL SPEAKERS High-Fidelity Sound • Affordable Upgrade • Everyday Value Upgrade your ride with the all-new Diamond Audio DMDX Concentric Coaxial Speakers—engineered for car audio enthusiasts who want high-quality sound without the high price. The DMDX series delivers the perfect balance of clarity, power, and value, making it the ideal car audio upgrade for drivers who demand more than factory sound. With its advanced concentric coaxial design, the DMDX lineup produces an incredibly natural soundstage, combining crisp highs, rich midrange detail, and tight, responsive bass. Every note is precise, every lyric is clear, and every beat hits with energy—transforming your daily drive into a concert on wheels. Built with Diamond Audio’s heritage of sound innovation, these coaxial car speakers are crafted from premium components for lasting performance. Whether you’re replacing OEM speakers or enhancing your aftermarket sound system, the DMDX series is the ultimate way to achieve affordable high-fidelity sound. Specifications: Power Handling - Watts (RMS/Peak): 30W RMS / 90W MAX Frequency Response (Hz): 70Hz-20KHz Sensitivity (1W/1M): 82dB Nominal Impedance (ohms): 4Ω Free-Air Resonance (Hz): 110Hz Mounting Depth-inch (mm): 1.81" (46mm) Cut-Out Diameter -inch (mm): 3.7" (94mm) Overall Diameter -inch (mm): 4.02" (102mm) Overall Height -inch (mm): 2.01" (51.1mm) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega XED42 XED Series 4" 2-Way Coaxial Speakers Defy all odds and overcome budget limitations with the best-in-class XED SERIES SPEAKERS that provide quality sound reproduction without breaking the bank. Harnessed with suitable power handling capability and balanced metal dome tweeters, XED SERIES SPEAKERS provides tremendous value and sound that will be music to your ears. Specifications: SPEAKER SIZE - 4” SPEAKER TYPE - TRI AXIAL, SPEAKER TYPE - CO AXIAL OHMS (PER COIL) - 4 NUMBER OF VOICE COILS - SINGLE CONE MATERIAL - POLYPROPYLENE DIAPHRAGM MATERIAL - ALUMINIUM BASKET MATERIAL - STAMPED STEEL MAGNET TYPE - FERRITE (CERAMIC) SURROUND MATERIAL - TREATED FOAM CROSSOVER INCLUDED - YES - INTERNAL FREQUENCY RESPONSE (HZ): 70HZ-20KHZ VOICE COIL DIAMETER - INCH (MM) - 1" POWER HANDLING RMS: 20W POWER HANDLING MAX: 150W MOUNTING DEPTH: 2.25” (57.3MM) MOUNTING DIAMETER: 3.9” (101MM) GRILL: YES Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega H40 HED 2025 Edition 4” 2-Way Coaxial Full Range Speaker Set Transform your car audio system with the Cerwin Vega HED 2025 Edition H40, a 4” 2-way coaxial full-range speaker system designed to bring you dynamic, high-definition sound across the entire frequency spectrum. As part of the HED Series, the H40 delivers crystal-clear highs, full-bodied mids, and punchy bass, turning every drive into a captivating listening experience. Whether you're enjoying bass-heavy tracks or delicate acoustic music, the H40 ensures every note is heard with remarkable clarity and depth. 2-Way Coaxial Design for Balanced Sound The H40 features a 4” woofer and a 1” PEI tweeter that work together to create a full-range, dynamic audio experience. The polypropylene cone offers responsive bass and midrange reproduction, while the UV-treated foam surround provides enhanced durability, ensuring long-lasting performance. The dynamically balanced 1” PEI tweeter, powered by a neodymium magnet, delivers crisp, detailed highs, ensuring every song is rich in clarity and free from distortion. HED Series Features 4” Woofer & 1” PEI Tweeter – A complete 2-way coaxial system providing balanced, full-range audio with precise bass, clear mids, and brilliant highs. Responsive Polypropylene Cone – Offers detailed, accurate sound reproduction across the entire frequency range. UV-Treated Foam Surround – Ensures durability and performance in all conditions, even during extended listening sessions. Dynamically Balanced 1” PEI Tweeter – Produces crisp, bright high frequencies with exceptional clarity, powered by a neodymium magnet for maximum efficiency. Integrated Crossover with Tweeter Protection – Guarantees smooth transitions between frequencies, protecting the tweeter from distortion at high volumes. Strontium Ferrite Woofer Magnet – Provides strong bass response and enhanced low-end performance for a fuller, more immersive sound. Powder-Coated, Rigid Stamped Steel Basket – Reduces unwanted vibrations and distortion, ensuring precise and stable sound reproduction. Sold in Pairs – Ideal for a balanced stereo system, providing consistent, high-quality sound across your vehicle. The H40 offers exceptional sound quality, crafted with Cerwin Vega’s engineering expertise to deliver reliable performance and precision. Whether you're upgrading your factory system or building a custom audio setup, the H40 will bring your music to life with stunning clarity and power. Elevate your sound with Cerwin Vega’s HED Series and enjoy a superior audio experience wherever you go! Specifications: POWER RATING: 150WMAX / 50WRMS FREQUENCY RESPONSE: 85HZ-20KHZ                   SENSITIVITY (1W/1M): 84DB                             NOMINAL IMPEDANCE: 4Ω     FREE-AIR RESONANCE (F0): 99HZ    MOUNTING DEPTH: 46MM / 1.81IN  CUT-OUT DIAMETER: 94MM / 3.7IN  OVERALL DIAMETER: 102MM / 4.02IN         OVERALL HEIGHT: 53MM / 2.09IN  General Features: RESPONSIVE POLYPROPYLENE CONE UV TREATED FOAM SURROUND DYNAMICALLY BALANCED 1/2'' PEI TWEETER INTEGRATED CROSSOVER WITH TWEETERPROTECTION                    NEODYMIUM TWEETER MAGNETS STRONTIUM FERRITE WOOFER MAGNET                            POWDERCOATED, RIDGID STAMPED STEEL BASKET                 SOLD IN PAIRS MESH STEEL GRILLES INCLUDED Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega V4 2025 Edition - 4" 2-Way Coaxial Speakers (4Ω) Take your sound system to the next level with the Cerwin Vega V4, a 4” coaxial speaker engineered for precision, power, and durability. Designed as part of the high-performance Vega Series, the V4 delivers crystal-clear highs, rich mids, and deep bass, making every note and beat come alive with clarity and impact. Whether you're upgrading your factory system or building a custom setup, the V4 offers the perfect balance of power and efficiency. Unmatched Audio Clarity & Performance The V4 is built with a hybrid carbon fiber-polypropylene cone, ensuring accurate sound reproduction with enhanced durability. Paired with the signature Santoprene™ rubber surround, this speaker provides exceptional excursion, reducing distortion while delivering deep, powerful bass and detailed midrange frequencies. Signature Vega Series General Features: Hybrid Carbon Fiber / Polypropylene Cone – Optimized for precise and dynamic audio reproduction. Santoprene™ Rubber Surround – Increases durability and enhances bass response. Dynamically Balanced Silk Dome Tweeter – Ensures smooth, detailed highs with the efficiency of a neodymium magnet. Integrated Crossover with Tweeter Protection – Maintains seamless frequency transitions and prevents distortion at high volumes. Strontium Ferrite Woofer Magnet – Enhances low-end response for fuller, richer bass. Powder-Coated, Rigid Stamped Steel Basket – Reduces vibration and distortion for cleaner sound output. Sold in Pairs – Perfect for stereo imaging and system expansion. Experience the legendary Cerwin Vega sound with the V4, built for those who demand powerful, clear, and reliable audio. Upgrade your ride with the Vega Series and hear the difference! Specifications: Power: 80W RMS/240W MAX Frequency Response: 84Hz-20KHz Sensitivity (1W/1M): 83dB Nominal Impedance: 4Ω Free Air Resonance: 122Hz Overall Diameter: 4.02" (102mm) Cut-Out Diameter: 3.70" (94mm) Mounting Depth: 1.75" (44.5mm) SPEAKER SIZE - 4” SPEAKER TYPE - CO AXIAL OHMS (PER COIL) - 4 NUMBER OF VOICE COILS - SINGLE CONE MATERIAL - POLYPROPYLENE DIAPHRAGM MATERIAL - SILK BASKET MATERIAL - STAMPED STEEL MAGNET TYPE - FERRITE (CERAMIC) SURROUND MATERIAL - SANTOPRENE CROSSOVER INCLUDED - YES - INTERNAL Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Power Acoustik XPS-104 120 Watt 4″ Midrange Speaker The Power Acoustik XPS-104 speakers, combined with the Cache CSM Sound Dampening, form a great package that can enhance both the sound quality and overall output of the speakers. Not only will the Dampening benefit your speakers, but you can also benefit your entire vehicle and its overall road noise isolation. Adding sound-dampening materials can make your car quieter and more comfortable, while also improving the sound quality. General Features: 300 watts max .75” Voice Coil Freq. Resp. 450 Hz to 10kHz. 15 oz. Magnet Imp. 4 Ohm SPL 92 dB Mounting Depth: 1.75” Sold Individually 1-year manufacturer warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.