Car Tweeters (86)

MR DJ HDT1000S 4-Inch Titanium Horn Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT1000S 4" heavy-duty titanium super tweeters. MR DJ 4-inch square high compression titanium bullet tweeter features flat sides that allow for close side-by-side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can handle high frequencies with ease and are meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system.General Features: 4" Titanium Bullet High Compression Tweeter 11 Oz Ferrite Magnet mounting depth of 2-1/2" High-Temperaturerature Kapton Voice Coil, Peak Power Handling- 500W (Per Tweeter) @ 8-Ohm RMS Power Handling: 100W (Per Tweeter) @ 8-Ohm Peak Power Handling- 1500W (Per Tweeter) @ 4-Ohm RMS Power Handling: 450W (Per Tweeter) @ 4-Ohm Impedance 8 OHMS, Crossover Capacitor Included 1.75" High-Temperature Kapton Voice Coil Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate Punch P1T-S 240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit The Punch P1T-S is a 1” PEI dome tweeter kit designed for natural sound reproduction rated at 60 Watts RMS. The kit includes high-pass crossovers, mounting hardware, and three bezels for flush, surface, and angle configurations. Car audio fanatics will love the Punch series tweeter kit. It features a 1" (25mm) PEI dome, cool-looking outboard crossover, and 3 mounting bezels to accommodate various installations. General Features: 1" Punch Series Tweeter Kit Power Handling: Peak: 240 watts per pair / 120 watts each RMS: 120 watts per pair / 60 watts each Recommended power range: 10 - 60 watts RMS per channel Butyl rubber surround PEI dome tweeter Recessed tweeter mount uses standard 1-3/4" hole saw DDC (Discreet Dual Clamp) Tweeter Mounting provides concentric clamping pressure around the perimeter of the mounting hole. This results in maximum ease of installation. Grilles and mounting hardware included High Pass: 3,500 Hz 12dB/octave Butterworth Sensitivity: 90dB Frequency Response: 3,500-22,000 Hz Mounting Depth: 1/2" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Rockford Fosgate Punch P1T-S owner's manual Two 1" tweeters (with attached 6" speaker wire terminated with female quick-slide connectors) 2 Crossovers 2 Front flush mount brackets 2 Rear flush mount brackets 2 Surface mounting housings 2 Trim rings Two M4x25mm Machine screws Two M4x10mm Machine screws Two M4x16mm Stud bolts Two 40" Lengths of speaker wire (each with male quick slides on one end and female quick slides on the other) Two 40" Lengths of speaker wire (each with female quick slides on one end and bare wire on the other) Four 7" Zip ties Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Soundstream TWS.7 Tweeters This tweeter set is an outstanding addition to any sound system that needs more accuracy and naturalness while allowing you to hear deeper through the bass. 1″ Soft Dome Ferrofluid Cooled Tweeter Neodymium Magnet Tri-Mounting – Flush, Surface, or Angle 12dB/Octave Passive Crossover Included Rated Input Power: 110W Impedance: 4ohm Resp. 3KHz – 20KHz SPL 93dB Cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

Soundstream TWT.5N Tweeters General Features: This tweeter set is an outstanding addition to any sound system that needs more accuracy and naturalness while allowing you to hear deeper through the bass. General Features: 1″ PEI  Surface or Angled Mounting Dome Tweeters 12dB Passive Crossover Included Rated Input Power: 110W Impedance: 4 ohm Freq. Resp. 2KHZ-21KHZ SPL 97dB ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Soundstream SPT.05 250w 4-Ohm Pro Audio Tweeters General Feature Max Power 350 Watts RMS Power 175 Watts Voice Coil & Diaphragm 1″ Aluminum Impedance 4-Ohm Frequency Response 2kHz-25kHz Efficiency (1w/1m) 102dB Mounting Depth 1.125″ ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Soundstream SPT.05 250w 4-Ohm Pro Audio Tweeters General Feature Max Power 250 Watts RMS Power 125 Watts Voice Coil & Diaphragm 1″ Aluminum Impedance 4-Ohm Frequency Response 2kHz-20kHz Efficiency (1w/1m) 104dB Mounting Depth 2.00 ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Soundstream SPT.20 350w 4-Ohm Pro Audio Tweeters General Feature Max Power 350 Watts RMS Power 175 Watts Voice Coil & Diaphragm 1″ Aluminum Impedance 4-Ohm Frequency Response 2kHz-20kHz Efficiency (1w/1m) 105dB Mounting Depth 2.125″ ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Soundstream SPT.22 600w 4-Ohm Pro Audio Tweeters General Feature: 600W Bullet tweeters Max Power Handling: 600W RMS Power Handling: 300W 1.75" aluminum bullet tweeters Impedance: 4 ohm Frequency response: 2000 - 25000 Hz Sensitivity: 106dB Mounting depth: 2.5" Authorized Internet Dealer ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-S10TW 240W S-Series 1" Silk Dome Tweeter Set + Alpine SPE-6090600W Peak (150W RMS) 6x9" Type-E Series 2-Way Coaxial Car Speakers Alpine S-S10TW 240W S-Series 1" Silk Dome Tweeter Set  General Features: 1-Inch Dome Tweeter Peak Power Handling: 240 Watts RMS Power Handling: 80 Watts Impedance: 6 ohms Sensitivity: 88dB SPL (1W @1m) Frequency Response: 1k Hz to 22kHz Mounting Depth: 3/4" (1.8cm) Cutout Diameter: 2" (5.1cm) circle Recommended Amplification: up to 80 watts RMS per channel Authorized Internet Dealer 1-year Manufactures Warranty What's in the S-S10TW package: S-S10TW owner's manual 2 Tweeters 2 Flush mount housings Two 38" Wires with in-line crossovers 2 Flush mount retention rings  2 Stealth brackets  2 Alpine logo badges  Warranty information  Online product registration information  Alpine SPE-6090 600W Peak (150W RMS) 6x9" Type-E Series 2-Way Coaxial Car Speakers General Features 6" x 9" Type-E Coaxial 2-way Car Speakers Peak Power Handling: 600 watts per pair / 300 watts each RMS Power Handling: 150 watts per pair / 75 watts each Polypropylene cone pearl mica injection 3/4" Silk soft dome tweeter Tweeter Magnet: Neodymium Woofer Magnet: Ferrite 4 ohms impedance Square voice coil wire Injection-molded frame Frequency Response: 65-18,000 Hz Sensitivity: 91 dB Top-Mount Depth: 3" Mounting Diameter: 5-15/16" x 8-3/4" Authorized Internet Dealer 1-year Warranty What is in the SPE-6090 package: SPE-6090 owner’s manual Two 2-way speakers 2 Grilles 2 Bottom mount brackets Two 14.75' Lengths of speaker wire Eight 1-3/8" Screws Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-S10TW 240W S-Series 1" Silk Dome Tweeter Set The S-S10TW Tweeter’s compact size and wide frequency range are an efficient and affordable upgrade to any factory or aftermarket sound system. The S-S10TW Tweeter’s motor structure was designed to reduce distortion and increase output at high volumes, so you can turn your music up and still experience crystal clear sound. Brighten up your sound stage without sounding overpowering or compromising sound quality. The silk dome design minimizes harsh highs and produces a warm and mellow tone.  General Features: 1-Inch Dome Tweeter Peak Power Handling: 240 Watts RMS Power Handling: 80 Watts Impedance: 6 ohms Sensitivity: 88dB SPL (1W @1m) Frequency Response: 1k Hz to 22kHz Mounting Depth: 3/4" (1.8cm) Cutout Diameter: 2" (5.1cm) circle Recommended Amplification: up to 80 watts RMS per channel Authorized Internet Dealer 1-year Manufactures Warranty What's in the S-S10TW package: S-S10TW owner's manual 2 Tweeters 2 Flush mount housings Two 38" Wires with in-line crossovers 2 Flush mount retention rings  2 Stealth brackets  2 Alpine logo badges  Warranty information  Online product registration information  ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-S10TW 240W S-Series 1" Silk Dome Tweeter Set The S-S10TW Tweeter’s compact size and wide frequency range are an efficient and affordable upgrade to any factory or aftermarket sound system. The S-S10TW Tweeter’s motor structure was designed to reduce distortion and increase output at high volumes, so you can turn your music up and still experience crystal clear sound. Brighten up your sound stage without sounding overpowering or compromising sound quality. The silk dome design minimizes harsh highs and produces a warm and mellow tone.  General Features: 1-Inch Dome Tweeter Peak Power Handling: 240 Watts RMS Power Handling: 80 Watts Impedance: 6 ohms Sensitivity: 88dB SPL (1W @1m) Frequency Response: 1k Hz to 22kHz Mounting Depth: 3/4" (1.8cm) Cutout Diameter: 2" (5.1cm) circle Recommended Amplification: up to 80 watts RMS per channel Authorized Internet Dealer 1-year Manufactures Warranty What's in the S-S10TW package: S-S10TW owner's manual 2 Tweeters 2 Flush mount housings Two 38" Wires with in-line crossovers 2 Flush mount retention rings  2 Stealth brackets  2 Alpine logo badges  Warranty information  Online product registration information  ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik NX-5 Bullet Tweeter 100 Watts MAX 2 Tweeters per box General Features: Machined Aluminum Chassis Pair of 1" NX Series Pro Audio Titanium Bullet Horn Tweeters Power Handling: Peak: 400 watts per pair / 200 watts each Power Handling: RMS: 200 watts per pair / 100 watts each Recommended power range: 15 - 100 watts RMS per channel Die-cast aluminum frame Diamond black cutting finish High-density neodymium magnet Titanium Diaphragm 1″ High-Temperature Voice Coil Black Anodized Frame High Strength Neodymium Magnet Freq. Resp 3kHz-20kHz Imp. 3 ohm SPL 109dB Peak Power Handling: 200 watts RMS Power Handling: 100 wattsr Priced Per: Pair Tweeter Size: 1" Tweeter Design: Bullet Tweeter Composition: Titanium Flush Mount: Yes Surface Mount: Yes Angled Mount: No Sensitivity: 109 dB Cutout Dimensions: 1-3/4" x 1-3/4" ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

4 XP Audio XBT200 1-Inch Titanium Horn Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition XP Audio XBT200 1" heavy-duty titanium super tweeters. XP Audio XBT200 1-inch high compression titanium bullet tweeter features flat sides that allow for close side by side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. XP Audio Professional grade super tweeters that can handle high frequencies with ease and meticulously designed tweeters to sound as good as they look. XP Audio Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. Absolute USA Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system.General Features: 1" / 25mm Titanium Bullet High Compression Tweeter 11 Oz Ferrite Magnet mounting depth of 2-1/2" High-Temperaturerature Kapton Voice Coil, Peak Power Handling- 200W (Per Tweeter) @ 4-Ohm RMS Power Handling: 50W (Per Tweeter) @ 4-Ohm Impedance 8 OHMS, Crossover Capacitor Included 1.75" High-Temperature Kapton Voice Coil Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Measurements: Overall depth 2.71 inches (69 mm) Mounting depth 1.74 inches (44 mm) Overall width 2.28 inches (58 mm) Cutout diameter 3.6 inches (92 mm) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 XP Audio XBT200 1-Inch Titanium Horn Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition XP Audio XBT200 1" heavy-duty titanium super tweeters. XP Audio XBT200 1-inch high compression titanium bullet tweeter features flat sides that allow for close side by side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. XP Audio Professional grade super tweeters that can handle high frequencies with ease and meticulously designed tweeters to sound as good as they look. XP Audio Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. Absolute USA Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system.General Features: 1" / 25mm Titanium Bullet High Compression Tweeter 11 Oz Ferrite Magnet mounting depth of 2-1/2" High-Temperaturerature Kapton Voice Coil, Peak Power Handling- 200W (Per Tweeter) @ 4-Ohm RMS Power Handling: 50W (Per Tweeter) @ 4-Ohm Impedance 8 OHMS, Crossover Capacitor Included 1.75" High-Temperature Kapton Voice Coil Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Measurements: Overall depth 2.71 inches (69 mm) Mounting depth 1.74 inches (44 mm) Overall width 2.28 inches (58 mm) Cutout diameter 3.6 inches (92 mm) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

XP Audio XBT200 1-Inch Titanium Horn Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition XP Audio XBT200 1" heavy-duty titanium super tweeters. XP Audio XBT200 1-inch high compression titanium bullet tweeter features flat sides that allow for close side by side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. XP Audio Professional grade super tweeters that can handle high frequencies with ease and meticulously designed tweeters to sound as good as they look. XP Audio Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. Absolute USA Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system.General Features: 1" / 25mm Titanium Bullet High Compression Tweeter 11 Oz Ferrite Magnet mounting depth of 2-1/2" High-Temperaturerature Kapton Voice Coil, Peak Power Handling- 200W (Per Tweeter) @ 4-Ohm RMS Power Handling: 50W (Per Tweeter) @ 4-Ohm Impedance 8 OHMS, Crossover Capacitor Included 1.75" High-Temperature Kapton Voice Coil Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Measurements: Overall depth 2.71 inches (69 mm) Mounting depth 1.74 inches (44 mm) Overall width 2.28 inches (58 mm) Cutout diameter 3.6 inches (92 mm) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov