In-Dash Sound Processors EQ (11)

Soundstream MPQ-7B 7-Band Parametric Equalizer w/ Independent Subwoofer Level Control General Features: 30V Bipolar Switching Power Supply 20dB Headroom Eliminated Signal Overload 2 Selectable Balanced RCA Inputs w/ Input gain Front, Rear, & Subwoofer RCA Outputs Seven Frequency Bands with +/- 18db Boost/Cut 40Hz, 100Hz, 275Hz, 700Hz, 2kHz, 5kHz, 14kHz Independent Subwoofer Level Control Selectable Low-Pass Filter: 32Hz, 64Hz, 125Hz Input Selector Switch Fader Control Blue Backlit Control Knobs S/N Ratio: 115dB THD: 0.05% Stereo Separation: 82dB Frequency Response: 10Hz-15kHz Max Output Voltage: 8V ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik PWM-5V 5-Band Parametric Equalizer w/ Subwoofer Control Maybe you’ve got an older car audio system from which you want to get more. Perhaps you’ve got an all-new setup that you want to get the maximum potential. In either case, Power Acoustik’s NEW PWM-5V has (5) bands of equalization that’ll let you fine-tune your sound, along with independent master volume, subwoofer level, and fader controls’ll maintain your highs and lows in balance.The PWM-5V features RCA inputs so that you can connect them to your aftermarket system. The RCA outputs ensure that your amplifiers get a clean, powerful signal for maximum performance. You will also notice this particular Equalizer has a built-in Voltage-Level Indicator. General Features: Power Supply: 11-15 DC Max Output Voltage: 8.5V RMS Frequency Response: 10-50 kHz ± 1 dB Equalization Range: ± 12 dB Subwoofer Crossover Frequency: 43-60 Hz Input Impedance: 20K Ohms Output Impedance: 2K Ohms S/N Ratio: 80 dB Ref. 1V Input T.H.D.: 0.05% SIZE: 7″L x 4.25″W x 1.25″H ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik PWM-20 4-Band Parametric Equalizer w/ Subwoofer Electronic Crossover General Features: Power Supply: 11-16 DC Neg. Ground Max Output Voltage: 7V RMS/12V Peak Frequency Response: 20-20000Hz Equalization Range: ± 12 dB Subwoofer Crossover Frequency: 30-250 Hz S/N Ratio: 110 dB Ref. 1V Input T.H.D.: 0.05% Blue LED Back Lighting Selectable Balanced Inputs Independent Subwoofer Output and Level SIZE: 7″L x 4.25″W x 1.25″H 1-year manufacturer warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik PWM-16 4-Band Graphic Equalizer w/ Built-In Pre-Amp & Subwoofer Control General Features: 4-Band Graphic Equalizer with Built-In Pre-Amp and Subwoofer Control and CD/Aux Selector Switch 4 Gain controls (± 18dB) Isolated PWM (Pulse Width Modulated) power supply Selectable Radio/CD/Auxiliary outputs Master volume gain control Separate bass volume gain control Front-to-rear fade control Remote turn-on leads Dimensions: 7″L x 4-1/4″W x 1-1/4″H 1-year manufacturer warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Audio Control ACR-2 Remote Level/Bass Control For Select AudioControl Processors Add remote level control for your LCQ-1. This is the replacement remote for the Epicenter® Plus. Comes with a 20-foot cable and removable mounting enclosure (for custom dash installations). General Features: Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Dimensions: 1.75”W x 2.5”D x 1.0”H Weight: 2.3oz (65.2g) Compatible with: LCQ-1 The Epicenter® Plus Legacy products supported: LC7 DQL-8 What is in the ACR-2 package: ACR-2 owner's manual Remote dash mount control 20' RJ-14 cable ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control ACR-2 Remote Level/Bass Control For Select AudioControl Processors Add remote level control for your LCQ-1. This is the replacement remote for the Epicenter® Plus. Comes with a 20-foot cable and removable mounting enclosure (for custom dash installations). General Features: Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Dimensions: 1.75”W x 2.5”D x 1.0”H Weight: 2.3oz (65.2g) Compatible with: LCQ-1 The Epicenter® Plus legacy products supported: LC7 DQL-8 What is in the ACR-2 package: ACR-2 owner's manual Remote dash mount control 20' RJ-14 cable ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik PWM-5V 5-Band Parametric Equalizer w/ Subwoofer Control Maybe you’ve got an older car audio system from which you want to get more. Perhaps you’ve got an all-new setup that you want to get the maximum potential. In either case, Power Acoustik’s NEW PWM-5V has (5) bands of equalization that’ll let you fine-tune your sound, along with independent master volume, subwoofer level, and fader controls’ll maintain your highs and lows in balance.The PWM-5V features RCA inputs so that you can connect them to your aftermarket system. The RCA outputs ensure that your amplifiers get a clean, powerful signal for maximum performance. You will also notice this particular Equalizer has a built-in Voltage-Level Indicator. General Features: Power Supply: 11-15 DC Max Output Voltage: 8.5V RMS Frequency Response: 10-50 kHz ± 1 dB Equalization Range: ± 12 dB Subwoofer Crossover Frequency: 43-60 Hz Input Impedance: 20K Ohms Output Impedance: 2K Ohms S/N Ratio: 80 dB Ref. 1V Input T.H.D.: 0.05% SIZE: 7″L x 4.25″W x 1.25″H ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

AudioControl The Epicenter® Micro Bass restoration processor+ Free Absolute Electrical Tape+ Phone Holder Add bass to your aftermarket system's high-level sourceMost factory radios dial down deep, low-hitting bass notes to protect flimsy factory speakers. The Epicenter Micro from AudioControl takes amplified speaker-level signals, converts them into the high-quality preamp signals your sub amp needs, and then adds the bass that's missing. Even when listening to traditionally bass-weak classical, jazz, folk, or Tejano music, you'll finally be able to hear all the good bass you've been missing. How does it do it? Sophisticated processing analyzes the incoming signal and synthesizes low-bass fundamental tones, increasing bass response tremendously. A single band ParaBASS® equalizer lets you fine-tune your subwoofer's tone. A selectable subsonic filter removes extreme low frequencies so your amps and subs will play more efficiently. The Epicenter Micro will also connect to any receiver with preamp outputs — its balanced inputs will reject noise from your car's electrical system for ultra-clean output. Installation conveniences The included ACR-4 dash-mount wired remote control allows you to adjust the level of your sub channel on the go. Load selection switches make OEM factory system integration easier, so The Epicenter Micro will work with almost any vehicle's sound system. Selectable turn-on modes include GTO™ Signal Sense (DC offset), audio sigal , or remote 12-volt input. Product highlights: active 2-channel line driver/output converter with bass restoration designed to work with aftermarket and factory systems provides up to 9.5 Vrms output (selectable level: 5, 7, 10V) preamp and speaker-level inputs speaker-level inputs handle up to 40V (400 watts RMS) speaker-level inputs feature switchable load resistance (20, 60, or 20,000 ohms) to prevent factory stereo shut-down Epicenter bass restoration increases bass response Para-Bass controls adjust center-frequency and width of bass EQ processing More info: ACR-4 wired remote included switchable Programmable Frequency Match (PFM) subsonic filter (20 Hz, 12/dB octave) selectable ground isolation helps eliminate noise auto turn-on via 12V remote, DC offset, or audio signal detect 12-volt turn-on lead output wiring, fuse, and hardware not included with device 18-gauge power and ground leads and a 1-amp fuse recommended dimensions: 5-1/8" W x 1" H x 3" D warranty: 5 years Absolute BT1700 Vinyl Electrical Tape is good quality, multi-purpose vinyl insulating tape. It has great resistance to moisture and varying weather conditions. It is a polyvinyl chloride (PVC) tape that is flame-retardant and conformable. Details Resists abrasion, moisture, alkalis, solvents, and acids Flame-retardant and inhibits the corrosion of electrical conductors Made of durable PVC Compatible with rubber and synthetic splicing compounds Withstands a temperature range of 32 to 194 °F (0 to 90 °C) UL Listed, CSA and VDE Certified Specifications Adhesive Type Rubber Application Insulation Brand Absolute Elongation at Break 200 % Maximum Operating Temperature (Celsius) 90 Degree Celsius Maximum Operating Temperature (Fahrenheit) 194 Degree Fahrenheit Minimum Operating Temperature (Fahrenheit) 32 Degree Fahrenheit Overall Length (Imperial) 60 ft Overall Length (Metric) 18 m Overall Width (Imperial) 0.75 in Overall Width (Metric) 19 mm Product Color Black Shelf Life 5 Year Tape Grade General Use ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov