Amplifiers & Power Management Systems (48)

MR DJ USA AMP5000DSP Class AB 2-Channel 5000W Rack PA DJ Power Amplifier With Onboard DSP, Bluetooth, USB playback & 2 Mic Input MR DJ AMP5000DSP has done it again: Class AB Pure Post-Stage Power Amplifier. Professional Audio DJ Equipment for Audio Subwoofer Speakers, Wedding Stage, KTV, Home Use & Onboard DSP Processing Gives You Total Control. Designing a high-quality power amp for use in the real world at an incredible price. The MR DJ AMP5000DSP power amplifier is designed for years of reliable, flawless operation under rigorous use. It represents a leap in affordable, quality power amplification. The AMP5000DSP offers the power, dependable performance, and ease of use required by musicians, DJs, entertainers, houses of worship, discos, and pubs. General features: 2-Channel Dynamic Series of Power Amplifier Onboard DSP Processing Gives You Total Control Large LCD Display Simplifies Amplifier Setup and Indicates Amp Status Built-in Bluetooth 5.3 for streaming from Phones, Computers, Tablets, and more Power Light Switch Mode Power Supply for the Highest Efficiency and Improved Audio Performance P.M.P.O Power Rating: 3000 Watts MAX Power Rating @ 4 ohms: 1600 Watts x 2  RMS Power Rating @ 4 ohms: 800 Watts x 2  RMS Power Rating @ 8 ohms: 400 Watts x 2  Total Harmonic Distortion: (20 ~ 20 Khz) < 0.5% Frequency Response: (20 ~ 20 kHz) under 0.5 dB Slow Ratio: 22V/uS Noise Ratio: > 102 dB Channel Isolation (f = 1 kHz) > 82 dB Crosstalk: >65 dB @ 8 ohm 1 KHZ THD+N: <0.05%@8 ohm 1/3 Po Input Level > 0 dB Input Impedance Balance: 20k ohm Input Impedance Unbalance: 10k ohms Damping Factor: >400 Input Sensitivity: 1V Heavy Duty Fuse Overload Protection Heavy-duty aluminum Alloy Heatsinks with rack-mountable design Input Gain Attenuator Balanced XLR Connectors Flow-Thru Air Path and Solid Aluminum Heat Sinks for Maximum Cooling Rack-Mountable Design / Double Fan-Cooled  Precise 4-Segment Signal and Limit LEDs to Monitor Performance XLR and 1/4" TRS Combination Input Connectors for Compatibility with any Source Professional Twist-Lock Speaker Connectors for Ultimate Reliability Heavy-Duty Fuse Overload Protection Heavy-Duty Aluminum Heatsinks Flow-Thru Air Path and Solid Aluminum Heat Sinks for Maximum Cooling Rack-Mountable Design / Fan-Cooled  Designed and Engineered in the USA 110v/220v Switchable 1-year Manufacturer's Warranty product dimensions: 19 x 15 x 4 inches shipping weight: 20 pounds Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mr. Dj AS305 Hybrid Pre Amplifier Built-in Bluetooth USB/SD Card Reader AM/FM Tuner 1000 Watts p.m.p.o Upgrade your home movie night by adding the MR DJ Bluetooth Home Audio Speaker Amplifier System. You can easily use this amplifier system with a PC or laptop, smartphone, DVD player, gaming system, and more. This home audio system from MR DJ is ideal for achieving surround sound in your home theater, living room, or den. The receiver is compatible with Bluetooth technology up to 30 feet away. Use this home audio amplifier system to stream a party playlist from your phone, tablet, or other smart devices. The front control panel has a sleek LED display. Blue lights help indicate different settings for the home system.  The professional integrated stereo receiver is equipped with Bluetooth wireless music streaming. Works with today’s latest devices including smartphones, iPhones, iPads, laptops, and computers with hassle-free receiver pairing General Feature: Mr. Dj AS305 hybrid Pre amplifier built-in Bluetooth USB/SD card Reader AM/FM tuner 1000 Watts P.M.P.O Power Output @ 4 Ohm: 200 Watts X 2 Max High-Powered Hybrid Preamplifier Receiver 2 speaker output & 1 Subwoofer Output Powers up to (3) Speakers AM/FM Radio with LCD Digital Display USB Flash Drive & SD Memory Card Readers MP3 Digital Audio File Support Connect and stream Audio from External Devices (2) 1/4’’ Microphone Inputs RCA (L/R) Audio Connectors Screw-Type Speaker Terminal Binding Posts Volume, Subwoofer, Tone, Echo, Mic. Volume Setting Front Panel Button Control Center Rack-Mountable  Built-in Bluetooth for wireless music streaming, digital VFD display with AM/FM Radio, USB flash & SD memory card Receives Wireless Signal for Audio Streaming Works with All of Your Favorite Devices Led backlight illumination with dimmer control RCA (L/R) Audio Input jacks Dual mono RCA jacks dedicated to subwoofer output  2 audio inputs, 1 audio output, 2 speaker output & 1 Subwoofer Output Color: Black Dimensions (L x W x H): 14 x 10.4 x 7.6 inches Weight: 15.75 pounds, 7.15 Kilogram Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine HDA-V90 Status HDA-V90 Hi-Res 5-Channel Amplifier, 75W x 4 + 300W x 1 @ 4-Ohm, 100W x 4 + 500W x 1 @ 2-Ohm & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle With the highest-quality music streaming available, Alpine Status delivers a superior audio performance that will take your music to a whole new level. General Features: Hi-Res Audio Playback (192kHz/24Bit) 5-Channel Amplifier High-Efficiency Digital Circuit Design Alpine’s Dual Negative Feedback Control Circuit High Bandwidth Amplifier Alpine’s Premium Class D Circuit Design Copper-plated chassis Black circuit board One-sided terminal layout Top panel sound controls Quick connect power and speaker terminals Optional Remote bass knob compatible (requires RUX-KNOB.2 or RUX-H01, sold separately) Tech Specs Dimensions: 11.4375” x 7.5” x 2.125” Power Rating: (14.4V, ≤1.0% THD+N) 75W x 4 + 300W x 1 @ 4Ω 100W x 4 + 500W x 1 @ 2Ω Bridged: 200W x 2 @ 4Ω (ch1/2, ch3/4 only) THD+N: 0.02% (10W into 4 ohms) S/N Ratio: 87dB (1W into 4 ohms) Frequency response: 8-60kHz (-3dB) Damping factor: 500 (ch1/2/3/4), 1000 (subwoofer) Selectable input level – HI/LO Selectable 2/4/6ch input Variable High pass / Low pass crossover Variable Subsonic filter (subwoofer) Bass EQ (0 to +12dB, Variable) Auto-turn on with remote sensing Superior Sound Using expertise gleaned from over five decades of crafting premium car audio products and trickle-down engineering and design from the Ultra Hi-Res AlpineF#1Status system technologies, the Alpine Status System features exceptional tooling and rich build quality for the best possible sound reproduction. Each component was hand-picked from the highest-quality materials for the highest in-class audio performance, which, when used as a complete system, can achieve 192kHz/24Bit playback. Impressive Output Powering a Hi-Res sound system without contributing noise during playback requires efficiency and precision, and the HDA-V90 was intentionally designed to provide impressive power output to the system while ensuring the purest audio performance. The amplifier’s wide dynamic range capability provides impressive output in a compact chassis that fits most vehicle applications. Precise Sound Reproduction The HDA-V90 features a high-efficiency digital circuit design that ensures ultra-low distortion levels for precise sound reproduction and superb sound quality. Intentional designs, like a copper-plated chassis and black circuit board, bring the signal-to-noise ratio up to 87dB and minimize noise and distortion during playback for complete music fidelity that’s true to the original source. Incredible Reliability Featuring technology unique to Alpine, the amplifier features Alpine’s dual negative feedback control circuit to improve linearity for the most accurate sound amplification. This technology also stabilizes the amplifier output while driving the speakers and subwoofers for ultimate reliability. Easy Installation The HDA-V90 features Alpine’s quick-connect power and speaker connectors for quick and safe installation. The one-sided terminal layout and top-panel sound controls give the user quick access to controls on the amplifier. Optimized For Full System The Alpine Status System is sold separately and can be used to build a custom sound system. Three sets of true 4V preamp outputs are included to add additional amplifiers if more power is needed. For best results, install the complete Alpine Status system together as a full system to achieve the highest in-class audio performance only second to the Ultra High-Resolution AlpineF#1System. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine HDA-V90 Status HDA-V90 Hi-Res 5-Channel Amplifier, 75W x 4 + 300W x 1 @ 4-Ohm, 100W x 4 + 500W x 1 @ 2-Ohm With the highest-quality music streaming available, Alpine Status delivers a superior audio performance that will take your music to a whole new level. General Features: Hi-Res Audio Playback (192kHz/24Bit) 5-Channel Amplifier High-Efficiency Digital Circuit Design Alpine’s Dual Negative Feedback Control Circuit High Bandwidth Amplifier Alpine’s Premium Class D Circuit Design Copper-plated chassis Black circuit board One-sided terminal layout Top panel sound controls Quick-connect power and speaker terminals Optional Remote bass knob compatible (requires RUX-KNOB.2 or RUX-H01, sold separately) Tech Specs Dimensions: 11.4375” x 7.5” x 2.125” Power Rating: (14.4V, ≤1.0% THD+N) 75W x 4 + 300W x 1 @ 4Ω 100W x 4 + 500W x 1 @ 2Ω Bridged: 200W x 2 @ 4Ω (ch1/2, ch3/4 only) THD+N: 0.02% (10W into 4 ohms) S/N Ratio: 87dB (1W into 4 ohms) Frequency response: 8-60kHz (-3dB) Damping factor: 500 (ch1/2/3/4), 1000 (subwoofer) Selectable input level – HI/LO Selectable 2/4/6ch input Variable High pass / Low pass crossover Variable Subsonic filter (subwoofer) Bass EQ (0 to +12dB, Variable) Auto-turn on with remote sensing Superior Sound Using expertise gleaned from over five decades of crafting premium car audio products and trickle-down engineering and design from the Ultra Hi-Res AlpineF#1Status system technologies, the Alpine Status System features exceptional tooling and rich build quality for the best possible sound reproduction. Each component was hand-picked from the highest-quality materials for the highest in-class audio performance, which, when used as a complete system, can achieve 192kHz/24Bit playback. Impressive Output Powering a Hi-Res sound system without contributing noise during playback requires efficiency and precision, and the HDA-V90 was intentionally designed to provide impressive power output to the system while ensuring the purest audio performance. The amplifier’s wide dynamic range capability provides impressive output in a compact chassis that fits most vehicle applications. Precise Sound Reproduction The HDA-V90 features a high-efficiency digital circuit design that ensures ultra-low distortion levels for precise sound reproduction and superb sound quality. Intentional designs, like a copper-plated chassis and black circuit board, bring the signal-to-noise ratio up to 87dB and minimize noise and distortion during playback for complete music fidelity that’s true to the original source. Incredible Reliability Featuring technology unique to Alpine, the amplifier features Alpine’s dual negative feedback control circuit to improve linearity for the most accurate sound amplification. This technology also stabilizes the amplifier output while driving the speakers and subwoofers for ultimate reliability. Easy Installation The HDA-V90 features Alpine’s quick-connect power and speaker connectors for quick and safe installation. The one-sided terminal layout and top-panel sound controls give the user quick access to controls on the amplifier. Optimized For Full System The Alpine Status System is sold separately and can be used to build a custom sound system. Three sets of true 4V preamp outputs are included to add additional amplifiers if more power is needed. For best results, install the complete Alpine Status system together as a full system to achieve the highest in-class audio performance only second to the Ultra High-Resolution AlpineF#1System. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ AMP8800 2500W MAX, 2-channel 1200 watts RMS bridgeable dynamic series PA DJ power amplifier MR DJ has done it again, designing a high-quality power amp for use in the real world, all at an incredible price. The MR DJ AMP8800 power amplifier is designed for years of reliable, flawless operation under rigorous use. THE MR DJ AMP8800 power amplifier represents a leap in affordable, quality power amplification. The amp8800 has power, dependable performance, and ease of use for musicians, DJs, entertainers, as well as houses of worship, discos, and pubs. product features 2-channel dynamic series of power amplifier power light switch mode, power supply for the highest efficiency and improved audio performance rated power rating: 8 ohms: 350 watts x 2 ch 4 ohms: 600 watts x 2 ch 8 ohms: 375 watts x 2 ch max 4 ohms: 625 watts x 2 ch max total harmonic distortion (20 ~ 20 Khz) < 0.5% frequency response (20 ~ 20 Khz) under 0.5 dB noise > 98 dB channel isolation (f = 1 kHz) > 82 dB input level > 0 dB input impedance > 10k ohm Max Power Output: 8800 Watts P.P.M.O Heavy Duty Fuse Overload Protection Heavy-Duty Aluminum Alloy Heatsinks with Rack Mountable Design Input Gain Attenuator Four LED Indicators Balanced XLR Connectors flow-thru air path and solid aluminum heat sinks for maximum cooling rack-mountable design / fan-cooled  Built-in Subwoofer/Satellite Crossover for Perfect Subwoofer Operation Detente and Illuminated Gain Controls for Precise Level Setting Precise 4-Segment Signal and Limit LEDs To Monitor Performance XLR and 1/4" TRS Combination Input Connectors for Compatibility with any Source Professional Twist-Lock Speaker Connectors for Ultimate Reliability balanced XLR connectors heavy-duty fuse overload protection heavy-duty aluminum heatsinks flow-thru air path and solid aluminum heat sinks for maximum cooling rack-mountable design / fan-cooled  Designed and engineered in the USA 1-year manufacturer's warranty product dimensions: 20 x 20 x 7 inches weight: 36 pounds shipping weight: 40.4 pounds  Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ USA AMP11000DSP Class AB 2-Channel 10000W Rack PA DJ Power Amplifier With Onboard DSP, Bluetooth, USB playback & 2 Mic Input MR DJ AMP11000DSP has done it again: Class AB Pure Post-Stage Power Amplifier. Professional Audio DJ Equipment for Audio Subwoofer Speakers, Wedding Stage, KTV, Home Use & Onboard DSP Processing Gives You Total Control. Designing a high-quality power amp for use in the real world at an incredible price. The MR DJ AMP11000DSP power amplifier is designed for years of reliable, flawless operation under rigorous use. It represents a leap in affordable, quality power amplification. The AMP11000DSP offers the power, dependable performance, and ease of use required by musicians, DJs, entertainers, houses of worship, discos, and pubs. General features: 2-Channel Dynamic Series of Power Amplifier Class AB Pure Post-Stage Power Amplifier Onboard DSP Processing Gives You Total Control Large LCD Display Simplifies Amplifier Setup and Indicates Amp Status Built-in Bluetooth 5.3 for streaming from Phones, Computers, Tablets, and more Power Light Switch Mode Power Supply for the Highest Efficiency and Improved Audio Performance P.M.P.O Power Rating: 10000 Watts MAX Power Rating @ 4 ohms: 3600 Watts x 2  RMS Power Rating @ 4 ohms: 1800 Watts x 2  RMS Power Rating @ 8 ohms: 900 Watts x 2  Total Harmonic Distortion: (20 ~ 20 Khz) < 0.5% Frequency Response: (20 ~ 20 kHz) under 0.5 dB Slow Ratio: 28V/uS Noise Ratio: > 105 dB Channel Isolation (f = 1 kHz) > 82 dB Crosstalk: >65 dB @ 8 ohm 1 KHZ THD+N: <0.05%@8 ohm 1/3 Po Input Level > 0 dB Input Impedance Balance: 20k ohm Input Impedance Unbalance: 10k ohm Damping Factor: >400 Input Sensitivity: 1V Heavy Duty Fuse Overload Protection Heavy-duty aluminum Alloy Heatsinks with a rack-mountable design Input Gain Attenuator Balanced XLR Connectors Flow-Thru Air Path and Solid Aluminum Heat Sinks for Maximum Cooling Rack-Mountable Design / Double Fan-Cooled  Precise 4-Segment Signal and Limit LEDs to Monitor Performance XLR and 1/4" TRS Combination Input Connectors for Compatibility with any Source Professional Twist-Lock Speaker Connectors for Ultimate Reliability Heavy-Duty Fuse Overload Protection Heavy-Duty Aluminum Heatsinks Flow-Thru Air Path and Solid Aluminum Heat Sinks for Maximum Cooling Rack-Mountable Design / Fan-Cooled  Designed and Engineered in the USA 110v/220v Switchable 1-year Manufacturer's Warranty product dimensions: 19 x 19 x 4 inches shipping weight: 41 pounds Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ USA AMP200DSP Class AB 2-Channel 2000W Rack PA DJ Power Amplifier With Onboard DSP, Bluetooth, USB playback & 2 Mic Input MR DJ AMP2000DSP has done it again: Class AB Pure Post-Stage Power Amplifier. Professional Audio DJ Equipment for Audio Subwoofer Speakers, Wedding Stage, KTV, Home Use & Onboard DSP Processing gives you total control. This design creates a high-quality power amp for real-world use at an incredible price. The MR DJ AMP2000DSP power amplifier is designed for years of reliable, flawless operation under rigorous use. It represents a leap in affordable, quality power amplification. The AMP2000DSP offers the power, dependable performance, and ease of use required by musicians, DJs, entertainers, houses of worship, discos, and pubs. General features: 2-Channel Dynamic Series of Power Amplifier Class AB Pure Post-Stage Power Amplifier Onboard DSP Processing Gives You Total Control Large LCD Display Simplifies Amplifier Setup and Indicates Amp Status Built-in Bluetooth 5.3 for streaming from Phones, Computers, Tablets, and more Power Light Switch Mode Power Supply for the Highest Efficiency and Improved Audio Performance P.M.P.O Power Rating: 2000 Watts MAX Power Rating @ 4 ohms: 280 Watts x 2  RMS Power Rating @ 4 ohms: 140 Watts x 2  RMS Power Rating @ 8 ohms: 70 Watts x 2  total Harmonic Distortion: (20 ~ 20 Khz) < 0.5% Frequency Response: (20 ~ 20 kHz) under 0.5 dB Slow Ratio: 22V/uS Noise Ratio: > 102 dB Channel Isolation (f = 1 kHz) > 82 dB Crosstalk: >65 dB @ 8 ohm 1 KHZ THD+N: <0.05%@8 ohm 1/3 Po Input Level > 0 dB Input Impedance Balance: 20k ohm Input Impedance Unbalance: 10k ohms Damping Factor: >400 Input Sensitivity: 1V Heavy Duty Fuse Overload Protection Heavy-duty aluminum Alloy Heatsinks with rack-mountable design Input Gain Attenuator Balanced XLR Connectors Flow-Thru Air Path and Solid Aluminum Heat Sinks for Maximum Cooling Rack-Mountable Design / Double Fan-Cooled  Precise 4-Segment Signal and Limit LEDs to Monitor Performance XLR and 1/4" TRS Combination Input Connectors for Compatibility with any Source Professional Twist-Lock Speaker Connectors for Ultimate Reliability Heavy-Duty Fuse Overload Protection Heavy-Duty Aluminum Heatsinks Flow-Thru Air Path and Solid Aluminum Heat Sinks for Maximum Cooling Rack-Mountable Design / Fan-Cooled  Designed and Engineered in the USA 110v/220v Switchable 1-year Manufacturer's Warranty product dimensions: 20.27 x 16 x 3.5 inches weight: 15.5 pounds Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ USA AMP3000DSP Class AB 2-Channel 3000W Rack PA DJ Power Amplifier With Onboard DSP, Bluetooth, USB playback & 2 Mic Input MR DJ AMP3000DSP has done it again: Class AB Pure Post-Stage Power Amplifier Professional Audio DJ Equipment For Audio Subwoofer Speakers Wedding Stage KTV Home Use & Onboard DSP Processing Gives You Total Control, designing a high-quality power amp for use in the real world at an incredible price. The MR DJ AMP3000DSP power amplifier is designed for years of reliable, flawless operation under rigorous use. It represents a leap in affordable, quality power amplification. The AMP3000DSP has the power, dependable performance, and ease of use to be used by musicians, DJs, and entertainers, as well as houses of worship, discos, and pubs. General features: 2-Channel Dynamic Series of Power Amplifier Class AB Pure Post-Stage Power Amplifier Onboard DSP Processing Gives You Total Control Large LCD Display Simplifies Amplifier Setup and Indicates Amp Status Built-in Bluetooth 5.3 for Streaming from Phones, Computers, Tablets, and more Power Light Switch Mode Power Supply for the Highest Efficiency and Improved Audio Performance P.M.P.O Power Rating: 3000 Watts MAX Power Rating @ 4 ohms: 880 Watts x 2  RMS Power Rating @ 4 ohms: 440 Watts x 2  RMS Power Rating @ 8 ohms: 220 Watts x 2  Total Harmonic Distortion: (20 ~ 20 Khz) < 0.5% Frequency Response: (20 ~ 20 Khz) under 0.5 dB Slow Ratio: 22V/uS Noise Ratio: > 102 dB Channel Isolation (f = 1 kHz) > 82 dB Crosstalk: >65 dB @ 8 ohm 1 KHZ THD+N: <0.05%@8 ohm 1/3 Po Input Level > 0 dB Input Impedance Balance: 20k ohm Input Impedance Unbalance: 10k ohm Damping Factor: >400 Input Sensitivity: 1V Heavy Duty Fuse Overload Protection Heavy-duty aluminum Alloy Heatsinks with Rack rack-mountable design Input Gain Attenuator Balanced XLR Connectors Flow-Thru Air Path and Solid Aluminum Heat Sinks for Maximum Cooling Rack-Mountable Design / Double Fan-Cooled  Precise 4-Segment Signal and Limit LEDs to Monitor Performance XLR and 1/4" TRS Combination Input Connectors for Compatibility with any Source Professional Twist-Lock Speaker Connectors for Ultimate Reliability Heavy-Duty Fuse Overload Protection Heavy-Duty Aluminum Heatsinks Flow-Thru Air Path and Solid Aluminum Heat Sinks for Maximum Cooling Rack-Mountable Design / Fan-Cooled  Designed and Engineered in the USA 110v/220v Switchable 1-year Manufacturer's Warranty product dimensions: 19 x 15 x 4 inches shipping weight: 18 pounds  Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

MR DJ USA AS305 Hybrid Amplifier Built-in Bluetooth USB/SD Card Reader AM/FM Tuner 1000 Watts p.m.p.o Upgrade your movie night by adding the MR DJ Bluetooth Home Audio Speaker Amplifier System. This amplifier system can easily be used with a PC or laptop, smartphone, DVD player, gaming system, and more. This home audio system from MR DJ is ideal for achieving surround sound in your home theater, living room, or den. The receiver is compatible with Bluetooth technology up to 30 feet away. Use this home audio amplifier system to stream a party playlist from your phone, tablet, or other smart devices. The front control panel has a sleek LED display. Blue lights help indicate different settings for the home system.  The professional integrated stereo receiver is equipped with Bluetooth wireless music streaming. Works with today’s latest devices, including smartphones, iPhones, iPads, laptops, and computers, with hassle-free receiver pairing General Feature: Mr. Dj AS305 hybrid Pre amplifier built-in Bluetooth USB/SD card Reader AM/FM tuner 1000 Watts P.M.P.O Power Output @ 4 Ohm: 200 Watts X 2 Max High-Powered Hybrid Preamplifier Receiver 2 speaker output & 1 Subwoofer Output Powers up to (3) Speakers AM/FM Radio with LCD Digital Display USB Flash Drive & SD Memory Card Readers MP3 Digital Audio File Support Connect and stream Audio from External Devices (2) 1/4’’ Microphone Inputs RCA (L/R) Audio Connectors Screw-Type Speaker Terminal Binding Posts Volume, Subwoofer, Tone, Echo, Mic. Volume Setting Front Panel Button Control Center Rack-Mountable  Built-in Bluetooth for wireless music streaming, digital VFD display with AM/FM Radio, USB flash & SD memory card Receives Wireless Signal for Audio Streaming Works with All of Your Favorite Devices Led backlight illumination with dimmer control RCA (L/R) Audio Input jacks Dual mono RCA jacks dedicated to subwoofer output  2 audio inputs, 1 audio output, 2 speaker output & 1 Subwoofer Output Color: Black Dimensions (L x W x H): 14 x 10.4 x 7.6 inches Weight: 15.75 pounds, 7.15 Kilogram Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.