All Loaded Subwoofer Enclosures Boxes (118)

Alpine SWT-12S4 1500W Max Single 12" Bass Reflex Sealed Subwoofer Tube Enclosure With 1500W peak power handling, this ready-to-use bass-reflex subwoofer tube is just for big-bass fans. A protective grille ensures that nothing sliding around in the trunk damages the woofer. General Features: 4 ohm Bass Reflex Series Alpine Subwoofer 12 inch 1500 Watts Peak Power Handling 300 Watts RMS Power Handling Heavy-Duty Subwoofer Grill Stitched Alpine Logo Carpeted Exterior Push SPK Terminal Installation Brackets and Belts Included Frequency Response: 28 - 200 Hz Sensitivity: 92 dB Speaker Impedance: 4 Ω Enclosure Dimensions: 12.75"W x 26" D Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 12" Passive Subwoofer Push SPK Terminal Voice coil size/type Sensitivity: 92dB Enclosure Features: Tube enclosure Black Carpet Finish with White Alpine Logo Grille included Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine SWT-S10 1200W Max Single 10" Sealed Subwoofer Bass Tube Enclosure Combining the intense low-bass performance and ground-shaking output of the traditional Type-R subwoofer tube in a thin package optimized for tiny enclosures. The SWT 10” Truck Subwoofer has been engineered to offer more installation flexibility without sacrificing enormous output to build the ideal sound system for your truck. At 4-1/8” deep. These subs provide deep bass performance where it usually couldn’t fit in a truck. The vented pole optimized for a 4-1/8” deep box is the ideal enclosure size, meaning excellent bass performance can fit just about anywhere in your truck. General Features: Single 10" Sealed Subwoofer Tube Enclosure 1200 Watts MAX Power Handling 250 Watts RMS Power Handling Final Impedance: 4 ohms Preloaded with a single 10" Subwoofer Sealed enclosure with embroidered black carpet Enclosure Dimensions: 11.25"W x 23.65" D 1-year Manufacturer's Warranty Subwoofer Features: 10" Passive Subwoofer Push SPK Terminal Frequency Response: 35-200 Hz Sensitivity: 90dB Enclosure Features: Tube enclosure Black Carpet Finish with White Alpine Logo Grille included What is in the Alpine SWT-S10 package: W10S4 owner's manual One 10" Subwoofer per box Adhesive-backed foam gasket Application Guide Online product registration information Warranty Information Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 Alpine S-W10D4 10"  Type S Car Audio Subwoofer with Absolute SS10 Custom Sub Box Enclosure Package This Package Includes the Following Items: 1 x Absolute SS10 Car Audio Single 10" Sealed Subwoofer Sub Box Enclosure MDF Wood 1 x Alpine S-W10D4 Car Audio Type S Series Sub Dual 4 Ohm 1200W Peak 10" Subwoofer Alpine S-W10D4 1800W Max (600W RMS) 10" S-Series Dual 4 Ohm Car Subwoofer General Features: 10" 4 ohm S-Series (Type-S) Subwoofer Power Handling: Peak: 1800 watts RMS: 600 watts Recommended power range: 250- 600W RMS Pulp/Kevlar Cone High Amplitude Multi-Roll (HAMR) Surround Progressive Spider with Reinforced Layer Tinsel Leads Airflow Optimized Dual Flare Pole Vent High Strength Steel Frame Basket 8 AWG Push Terminals with VC Configuration Jumpers Dual Voice Coil High-Grade Strontium Ferrite Magnets Top-mount depth: 4-11/16" Cutout diameter: 8-13/16 Frequency Response: 26- 200Hz Sensitivity: 86.4dB Resonance Frequency (Fs): 33 Hz Authorized Dealer 1-year Manufacturer's Warranty What is in the S-W10D4 package: Alpine S-W10D4 owner's manual One 10" Dual 4-ohm voice coil subwoofer Two 3" jumper cables Subwoofer Application Guide Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PWV-SB10 10" BassRev™ Powered Subwoofer Enclosure Bring your music to life with the Alpine PWV-SB10, a high-performance 10" powered subwoofer built for deep, impactful bass. With a powerful built-in amplifier delivering 400W RMS (200W x 2) and a dual 4-ohm voice coil design, this subwoofer delivers strong, controlled low frequencies with impressive clarity.Engineered with a sealed enclosure and a wide frequency response of 31–200 Hz, the PWV-SB10 ensures tight, distortion-free bass that enhances any genre of music. Fine-tune your sound with a variable low-pass filter (50–200 Hz), phase selector (0°/180°), and a remote level control for on-the-fly adjustments.Whether you're upgrading a factory system or building a custom setup, the PWV-SB10 offers clean, powerful bass and flexible tuning in one sleek package—the perfect blend of Alpine quality and low-end performance.Specifications:Performance: Amplifier Power Output RMS Per Channel, Ref.: 4 ohm, 14.4V: 400 W (200 W x 2) Speaker Diaphragm size nominal 10 inch (25 cm) Speaker Impedance Dual Voice Coil 4 Ohm + 4 Ohm Speaker Power Handling RMS/Peak: 200W + 200W/400W + 400W Frequency Response +0/-3dB: 31-200 Hz Enclosure Type: Sealed Control: Input Impedance: >10 kOhms Input Sensitivity RCA Input Ref.: Rated Power into 4 Ohms: Hi Level: 0.5 - 10V. Lo level: 0.2 - 2.0V Phase Selector 2 position: 0°/180° Crossover Variable LPF: 50 - 200 Hz (-24 dB/oct.) Remote Level Linear Attenuation 0 to -20dB General Dimensions: Width: 470mm (18 1/2") Height: 282 mm (11") Depth without grille: 126 mm (5") Depth including grille: 170 mm (6 3/4") Weight: 9.7 kg (21 lb 6.4 oz) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PWV-SB12 12" BassRev™ Powered Subwoofer Enclosure & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle Get the benefits of large-enclosure sound in a shallow-enclosure design! With proprietary technology designed to increase bass output without compromising space, the BassRev Powered Subwoofer Enclosures are sure to take your bass performance to the next level.OPTIM Sync Technology – The built-in DSP amplifier includes OPTIM Sync technology, which uses a proprietary dynamic bass-boost algorithm to extend bass frequencies on the preloaded subwoofer, delivering big-bass sound in a shallow enclosure.Shallow Design – The subwoofer's shallow footprint allows it to fit virtually anywhere in most vehicles.Attractive Design – The subwoofer enclosure is built from sturdy MDF with a double-brace structure, finished with premium black carpet and an embroidered white Alpine logo for bold contrast.General Features:• Preloaded BassRev Subwoofer• Available in a 10” or 12” size• Built-in powered DSP amplifier with OPTIM Sync technology• Shallow footprint for flexible fitment• Sealed enclosure• Carpeted MDF enclosure with double brace structure• Embroidered Alpine logo• Extended grille designSYSTEM COMPONENTS:• Preloaded Subwoofer EnclosureSYSTEM TECH SPECS:• 12” Enclosure Dimensions: 533mm (21”) W x 343mm (13.5”) H x 168mm (6 5/8”) D• Power Handling: 200W RMS / 400W Peak• Nominal Impedance: 4Ω• Frequency Response: 31 Hz – 200 Hz Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PWV-SB12 12" BassRev™ Powered Subwoofer Enclosure Get the benefits of large enclosure sound in a shallow enclosure design! With proprietary technology designed to increase bass output without compromising space, the BassRev Powered Subwoofer Enclosures are sure to take your bass performance to the next level.OPTIM Sync Technology – The built-in DSP amplifier includes OPTIM Sync technology, which uses a proprietary dynamic bass-boost algorithm to extend bass frequencies on the preloaded subwoofer, delivering big-bass sound in a shallow enclosure.Shallow Design – The subwoofer's shallow footprint allows it to fit virtually anywhere in most vehicles.Attractive Design – The subwoofer enclosure is built with sturdy MDF with a double brace structure, finished with a premium, black carpet and embroidered white Alpine logo for a bold contrast.General Features:• Preloaded BassRev Subwoofer• Available in a 10” or 12” size• Built-in powered DSP amplifier with OPTIM Sync technology• Shallow footprint for flexible fitment• Sealed enclosure• Carpeted MDF enclosure with double brace structure• Embroidered Alpine logo• Extended grille designSYSTEM COMPONENTS:• Preloaded Subwoofer EnclosureSYSTEM TECH SPECS:• 12” Enclosure Dimensions: 533mm (21”) W x 343mm (13.5”) H x 168mm (6 5/8”) D• Power Handling: 200W RMS / 400W Peak• Nominal Impedance: 4Ω• Frequency Response: 31 Hz – 200 Hz Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine HDZ-SB10 2400W Peak (800W RMS) Loaded Single 10" Sealed Enclosure & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle General Features: Sealed enclosure with 1 10" Status Series Subwoofer Includes one Alpine HDZ-W10 subwoofer Clear Acrylic side viewing windows with etched Alpine classic six chiclets Integrated blue/green switchable LED lighting Power Handling: Peak: 2400 watts RMS: 800 watts Final Impedance: 2-ohm Pulp/Mica cone High-Amplitude Multi-Roll (HAMR) surround Carbon Fiber dust cap Frequency Response: 27 - 200 Hz Sensitivity: 82.2 dB Dimensions: 13.75" L x 13.75" H x 16.25" W Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-SB12V 12" Halo S-Series Preloaded Subwoofer Ported Enclosure with ProLink Double The Fun -Alpine has been pumping out great sound for over 40 years, and now their Halo Series subwoofer enclosures make it easier to add more bass to your system. You'll get the low end you're looking for from one box, but when you want to expand your system, you can add a second enclosure and the optional linking kit to create a single two-speaker system with double the impact.Dishing It Out -The S2-SB12V comes loaded with Alpine's S2-W12D4 subwoofer wired for 2-ohm impedance. The sub's Kevlar-reinforced cone and Santoprene surround give you solid bass response at power levels up to 600 watts RMS. The ported enclosure is tuned to 35 Hz to maximize performance.Getting It Together -Two S2-SB12V enclosures can be linked using Alpine's KTX-H12 linking kit (sold separately). Heavy-duty steel front and rear linking brackets connect the enclosures for a compact, sturdy dual-subwoofer solution. The silver linking brackets match the enclosure trim for a neat, coordinated look.General Features:• 12" ported subwoofer enclosure• loaded with Alpine's S2-W12D4 subwoofer• linkable to second S2-SB12V enclosure with linking kit (sold separately)• Kevlar-reinforced pulp cone with Santoprene rubber surround• power handling: 600 watts RMS• frequency response: 26-200 Hz• 2-ohm impedance• dimensions: 17"W x 14.75"H x 15.5"D• warranty: 1 yearSpecifications:• Driver: Single 12."• Impedance: 2Ω (dual 4Ω voice coils paralleled)• Power Handling: 600W RMS• Enclosure: Ported• Frequency Response: 26-200Hz• Port Tuning: 35Hz• Dimensions: W = 17.0", H = 14.750", Depth = 15.50" Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PSS-TSUB-T3A 10” Subwoofer & Amplifier Upgrade Kit for 2017-2023 Tesla Model 3 Get ludicrous bass performance in your Tesla! The PSS-TSLA-T3A is a 10” sealed, pre-loaded subwoofer & power pack amplifier kit designed for plug-and-play performance for the 2017-2023 Tesla Model 3 with factory equipped premium sound systemBoost Your Bass – Get more bass without compromising your usable space. The PSS-TSLA-T3A directly replaces the factory Tesla 160W 8” subwoofer in the rear trunk panel with a powerful 200W 10” sealed subwoofer, without cutting or modifying. Paired with the ultra-efficient KTA-200M, this system delivers a dramatic increase in output and low-end clarity, giving your Tesla a noticeably more powerful and immersive audio experience.General Features:• Designed for 2017–2023 Tesla Model 3 Premium• Direct-fit, sealed 10” subwoofer enclosure - replaces factory subwoofer in Premium Sound-equipped vehicles• Not compatible with Tesla Base Audio system• Includes Alpine KTA-200M Mono Amplifier• Includes plug-and-play power harness and integration module• Hybrid carbon fiber cone material for precision bass• Alpine H.A.M.R. surround technology for extended excursion• Stealth install retains OEM appearance and cargo space• System tuned specifically for the Tesla Model 3 cabin• No cutting or vehicle modification required• Retains full OEM function• Sound damping recommended (sold separately)TECH SPECS:• Vehicle Compatibility: 2017–2023 Tesla Model 3 with OEM Premium Audio System• Subwoofer Size: 10”• Power Handling: 200W RMS / 500W Peak• Frequency Response: 25Hz – 300Hz• Cone Material: Hybrid Carbon Fiber• Surround Technology: Alpine H.A.M.R.• Amplifier: Alpine KTA-200M Mono Amplifier• Amplifier Integration: Includes LOC module & vehicle-specific harnesses• OEM Function: Fully retainedWHAT’S IN THE BOX:• Custom-fit 10” Sealed Subwoofer Enclosure• Alpine KTA-200M Mono Amplifier• Plug-and-Play Integration Harness• Line Output Converter Module• Power Harness• Installation Hardware Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SS-SB10 Single 10” S-Series Shallow Preloaded sealed downward-firing Subwoofer Enclosure With an ultra-shallow enclosure design and powerful sound output, the 10” S-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound.DESIGNED FOR TIGHT SPACESNow you don’t have to choose between bass and space! Alpine’s 10” S-Series Shallow Preloaded Subwoofer Enclosure measures at a minimal 4.5” deep to deliver clean and reliable bass performance in most vehicle applications.POWERFUL PERFORMANCEThe SS-SB10 features a 2” voice coil inside of a lightweight yet powerful neodymium magnet for up to 300W RMS of power handling. This combined with a front-mounted magnet motor allows the enclosure to have an extremely shallow footprint while maintaining powerful bass performance.ADJUSTABLE MOUNTING OPTIONSFour adjustable, foam-padded steel mounting brackets allow for flexible installation in many areas and vehicle types, while the foam reduces vibration during play for optimized performance.PRECISE BASS CONTROLAlpine’s Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, enables better motor control, resulting in 22mm of peak-to-peak linear excursion for maximized output.General Features: sealed downward-firing enclosure with one 10" S-Series shallow subwoofer water-resistant polymer enclosure polypropylene cone 2-ohm total impedance power handling: 300 watts RMS (600 watts peak) Preloaded 10” Shallow Subwoofer Optimal Sealed Cabinet Quality Neodymium Magnet Front-Mounted Neodymium Magnet Alpine Gen2 DD Linear Magnetic Circuit Rugged Polymer Enclosure Cabinet Adjustable, foam-padded mounting brackets for flexible installation and reduced vibration frequency response: 32-200 Hz dimensions: 18.5"W x 4.5"H x 12.5"D What's in the Box:Sealed Cabinet with (1) 10” S-Series Shallow Subwoofer(x4) Mounting BracketsOwner’s ManualWarranty InformationOnline product registration information TECH SPECS:• Dimensions: 18.5” (W) x 4.5” (H) x 12.5” (D)• Power Handling: 300W RMS• X-Max: 11mm 1-Way Linear• Nominal Impedance: 2Ω• Frequency Response: 35Hz - 200Hz• Copper Voice Coil: 2”• Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SS-SB12 Single 12” S-Series Shallow Preloaded sealed downward-firing Subwoofer Enclosure With an ultra-shallow enclosure design and powerful sound output, the 12" S-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound.DESIGNED FOR TIGHT SPACESNow you don’t have to choose between bass and space! Alpine’s 12” S-Series Shallow Preloaded Subwoofer Enclosure measures at a minimal 5.25” deep to deliver clean and reliable bass performance in most vehicle applications.POWERFUL PERFORMANCEThe SS-SB12 features a 2” voice coil inside of a lightweight yet powerful neodymium magnet for up to 300W RMS of power handling. This, combined with a front-mounted magnet motor, allows the enclosure to have an extremely shallow footprint while maintaining powerful bass performance.ADJUSTABLE MOUNTING OPTIONSFour adjustable, foam-padded steel mounting brackets allow for flexible installation in many areas and vehicle types, while the foam reduces vibration during play for optimized performance.PRECISE BASS CONTROLAlpine's Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, allows for better control over the motor, resulting in 22mm of peak-to-peak linear excursion for maximized output.General Features: sealed downward-firing enclosure with one 12" S-Series shallow subwoofer water-resistant polymer enclosure polypropylene cone 2-ohm total impedance power handling: 300 watts RMS (600 watts peak) Preloaded 12” Shallow Subwoofer Optimal Sealed Cabinet Quality Neodymium Magnet Front-Mounted Neodymium Magnet Alpine Gen2 DD Linear Magnetic Circuit Rugged Polymer Enclosure Cabinet Adjustable, foam-padded mounting brackets for flexible installation and reduced vibration frequency response: 32-200 Hz dimensions: 22.25"W x 5.25"H x 13.125"D What's in the Box:Sealed Cabinet with (1) 12” S-Series Shallow Subwoofer(x4) Mounting BracketsOwner’s ManualWarranty InformationOnline product registration informationTECH SPECS:Dimensions: 22.25” (W) x 5.25” (H) x 13.125” (D)Power Handling: 300W RMSFrequency Response: 30Hz-200HzX-Max:11mm 1-Way LinearNominal Impedance: 2ΩCopper Voice Coil: 2” (50.0mm)Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.