Alpine (1007)

2 Alpine S-SB12V 12" Halo Series Linkable Ported Vented Loaded Subwoofer Enclosure  Alpine S-SB12V Pre-Loaded S-Series 12-inch Subwoofer Enclosure UNIQUE PROLINK™ DESIGN When you want to make a noticeable impact in your sound system, add a subwoofer that will bring out the low ends of your music. But what if you already have a single subwoofer and still crave more bass? You could throw out your single enclosure and purchase a new dual enclosure or build your bass with Alpine's new ProLink™ technology. ProLink™ is unique to Alpine and allows you to link two S-SB12V enclosures together using an optional KTX-H12 Linking Kit (sold separately) to create a dual subwoofer enclosure. Now you have the flexibility in power and price to use a single subwoofer or add another subwoofer when more bass is desired. STAND OUT IN THE CROWD The Alpine Halo platform has a reputation for accessible, premium technology that modernizes the look and feel of any vehicle. Drawing inspiration from the sleek, tapered lines and clean silver finish of the Alpine Halo Display, the S-SB12V shares the same unique, curved edges outlined by a silver trim and a metallic front baffle for a matching system aesthetic. The S-SB12V will provide a premium sound performance and elevate the vehicle's interior for a subwoofer enclosure you can proudly show off. The optional mounting bracket (sold separately) KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look. The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and great sound quality. This enclosure is tuned to 36 Hz for optimized sub-bass performance. General Features: 12" ported subwoofer enclosure linkable to the second S-SB12V enclosure with the linking kit (sold separately) Kevlar-reinforced pulp cone with Santoprene rubber surround Includes S-W12D4 wired in parallel 600W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 26-200 Hz Vented enclosure tuning frequency: 35 Hz Dimensions 17-inch W x 14.625-inch H X 15-inch D Authorized Internet Dealer warranty: 1 year What is in the box: Ported enclosure loaded with one S-W12D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine KTX-H12 Linking Kit Linking Kit for Dual 12" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 12" subwoofer enclosures Add more bass to your sound system with the Linking Kit for Dual 12" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology. General Features: Aluminum rear link plate 12-inch Front ABS / Steel reinforced the port link Center link stabilizing dowels Alpine logo plate All hardware included Authorized Internet Dealer What is in the box: Front port-link Two 9" front port braces 23.25" Rear link-plate Four 25mm hex-socket screws Eight 14mm hex-socket screws Four 20mm threaded alignment posts 3mm Allen-key Installation instructions Safety warnings Alpine KTX-H12 Linking Kit owner's manual ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

 2 Alpine S-W10D2 1800W Max (600W RMS) 10" S-Series Dual 2 Ohm Car Subwoofer VERSATILE APPLICATIONS Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers are almost 1” more shallow than previous models at just over 4.5” for the 10” models and just over 5” for the 12” models, allowing them to fit into a wide variety of installation applications. General Features: 10" 2 ohm S-Series (Type-S) Subwoofer Power Handling: Peak: 1800 watts RMS: 600 watts Recommended power range: 250- 600W RMS Pulp/Kevlar Cone High Amplitude Multi-Roll (HAMR) Surround Progressive Spider with Reinforced Layer Tinsel Leads Airflow Optimized Dual Flare Pole Vent High Strength Steel Frame Basket 8 AWG Push Terminals with VC Configuration Jumpers Dual Voice Coil High-Grade Strontium Ferrite Magnets Top-mount depth: 4-11/16" Cutout diameter: 8-13/16 Frequency Response: 26- 200Hz Sensitivity: 86.4dB Resonance Frequency (Fs): 33 Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the box: One 10" Dual 2-ohm voice coil subwoofer 1 Rubber concealing ring (installed) Two 3" jumper cables (each has a single banana connector on each end) Subwoofer Application Guide (English/ French) Online product registration information (English/ French/ Spanish) Warranty information (English/ French) Important Notice! (English/ French) Alpine S-W10D2 owner's manual ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

 2 Alpine S-W10D2 1800W Max (600W RMS) 10" S-Series Dual 2 Ohm Car Subwoofer VERSATILE APPLICATIONS Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers are almost 1” more shallow than previous models at just over 4.5” for the 10” models and just over 5” for the 12” models, allowing them to fit into a wide variety of installation applications. General Features: 10" 2 ohm S-Series (Type-S) Subwoofer Power Handling: Peak: 1800 watts RMS: 600 watts Recommended power range: 250- 600W RMS Pulp/Kevlar Cone High Amplitude Multi-Roll (HAMR) Surround Progressive Spider with Reinforced Layer Tinsel Leads Airflow Optimized Dual Flare Pole Vent High Strength Steel Frame Basket 8 AWG Push Terminals with VC Configuration Jumpers Dual Voice Coil High-Grade Strontium Ferrite Magnets Top-mount depth: 4-11/16" Cutout diameter: 8-13/16 Frequency Response: 26- 200Hz Sensitivity: 86.4dB Resonance Frequency (Fs): 33 Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the box: One 10" Dual 2-ohm voice coil subwoofer 1 Rubber concealing ring (installed) Two 3" jumper cables (each has a single banana connector on each end) Subwoofer Application Guide (English/ French) Online product registration information (English/ French/ Spanish) Warranty information (English/ French) Important Notice! (English/ French) Alpine S-W10D2 owner's manual ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine W10S4 10" Bass Subwoofer 750W Max (250W RMS) 10" BassLine Series Single 4 ohm Car Subwoofer Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.Surround and wattage match made in heavenThe 250 watts of continuous power that the W10S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features: 10" Single 4-ohm BassLine (Bass) Series Subwoofer Power Handling: Peak: 750 watts RMS: 250 watts Recommended power range: 50W - 250W RMS Polypropylene-Mica cone High-excursion poly-foam surround Progressive Wavelet Ribs (P.W.R.) cone design Optional Alpine KTE-10PG subwoofer grill is available and is a wonderful complement to the trim ring with Alpine logo High-strength custom steel frame 8AWG push terminals 2" voice coil 52oz. magnet Top-mount depth: 5-1/16" Cutout diameter: 9" Frequency Response: 24 - 200Hz Sensitivity: 86.6dB Resonance Frequency (Fs): 32 Authorized Dealer 1-year Manufacturer's Warranty What's in the box: One 10" Subwoofer per box Adhesive-backed foam gasket Application Guide (English/ French) Online product registration information (English/ French/ Spanish) Warranty Information (English/ French) Important Notice! (English/ French) Alpine W10S4 owner's manual ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine W10S4 10" Bass Subwoofer 750W Max (250W RMS) 10" BassLine Series Single 4 ohm Car Subwoofer Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.Surround and wattage match made in heavenThe 250 watts of continuous power that the W10S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features: 10" Single 4-ohm BassLine (Bass) Series Subwoofer Power Handling: Peak: 750 watts RMS: 250 watts Recommended power range: 50W - 250W RMS Polypropylene-Mica cone High-excursion poly-foam surround Progressive Wavelet Ribs (P.W.R.) cone design Optional Alpine KTE-10PG subwoofer grill is available and is a wonderful complement to the trim ring with Alpine logo High-strength custom steel frame 8AWG push terminals 2" voice coil 52oz. magnet Top-mount depth: 5-1/16" Cutout diameter: 9" Frequency Response: 24 - 200Hz Sensitivity: 86.6dB Resonance Frequency (Fs): 32 Authorized Dealer 1-year Manufacturer's Warranty What's in the box: One 10" Subwoofer per box Adhesive-backed foam gasket Application Guide (English/ French) Online product registration information (English/ French/ Spanish) Warranty Information (English/ French) Important Notice! (English/ French) Alpine W10S4 owner's manual ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

(2) ALPINE X-W10D4 10" 900w RMS Car Audio Subwoofers DVC Dual-4ohm X-Series Subs Alpine X-W10D4 X-Series 2 X 10" subwoofer with dual 4-ohm voice coils Built to take it Alpine redesigns its X-Series subwoofers to deliver even more impressive performance. The X-W10D4 10" subwoofer handles up to 900 watts RMS, so don't hesitate to give it plenty of juice. This rugged sub features a pulp/mica cone with a parabolic shape that maintains its rigidity and strength for outstanding response and accuracy. The big rubber surround supports the cone in the sub's cast aluminum frame, while Alpine's latest technology allows this sub to move an amazing amount of air (28mm Xmax, for you bass geeks out there) at very high levels while staying cool.   Versatility You can wire the dual 4-ohm voice coils to get the optimum performance from your amp or configure a custom setup with multiple subwoofers. The X-W10D4 works well in sealed and ported enclosures, so you can choose what kind of bass you want to hear and feel. Note: If you are wiring this DVC sub for lower impedance, ensure that your amp is compatible.   Product highlights: 2 x 10" subwoofer with dual 4-ohm voice coils pulp/mica cone large HAMR rubber surround cast aluminum frame provides a rock-solid platform handles up to 900 watts RMS (450 watts per coil) peak power handling: 2700 watts frequency response: 24-200 Hz Xmax: 28mm top-mount depth: 7-3/8" warranty: 1 year One 10" Dual 4-ohm voice coil subwoofer Grille (installed) X-Series Subwoofer Application Guide (English/ French) Online product registration information (English/ French/ Spanish) Warranty Information (English/ French) Important Notice! (English/ French) ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

(2) ALPINE X-W10D4 10" 900w RMS Car Audio Subwoofers DVC Dual-4ohm X-Series Subs ALPINE 2 X-W10D4 10" 900 Watt RMS Car Audio Subwoofer DVC Dual-4ohm X-Series Sub. Alpine ID Sound Quality. 900W RMS, making it a perfect match for the X-Series X-A90M 900W mono amplifier 24mm linear Xmax (1 way), 48 mm peak to peak. Dual spiders for precision control over the large dynamic range. Dual shorting rings for strong motor control ensure low THD and tight bass Center pole radial heat sink which wicks heat away from the voice coil and transfers it outside the motor for long term high output The biggest HAMR surround yet, for linear cone movement throughout its large range of excursion. Light but rigid pulp/mica cone which allows for highly accurate bass with great natural tone Twist-lock Trim ring with full mesh grill included. Frequency Response: 24Hz-200Hz. Mounting Depth: 6-3/4". Cutout Diameter: 9 1/16" Built to take it Alpine redesigns its X-Series subwoofers to deliver even more impressive performance. The X-W10D4 10" subwoofer handles up to 900 watts RMS, so don't hesitate to give it plenty of juice. This rugged sub features a pulp/mica cone with a parabolic shape that maintains its rigidity and strength for outstanding response and accuracy. The big rubber surround supports the cone in the sub's cast aluminum frame, while Alpine's latest technology allows this sub to move an amazing amount of air (28mm Xmax, for you bass geeks out there) at very high levels while staying cool. Versatility You can wire the dual 4-ohm voice coils to get the optimum performance from your amp or to configure a custom setup with multiple subwoofers. The X-W10D4 works well in sealed and ported enclosures so you can choose what kind of bass you want to hear and feel. Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible. General Features: 10" subwoofer with dual 4-ohm voice coils pulp/mica cone large HAMR rubber surround cast aluminum frame provides a rock-solid platform handles up to 900 watts RMS (450 watts per coil) peak power handling: 2700 watts frequency response: 24-200 Hz Xmax: 28mm top-mount depth: 7-3/8" warranty: 1 year Two 10" Dual 4-ohm voice coil subwoofer Grille (installed) X-Series Subwoofer Application Guide (English/ French) Online product registration information (English/ French/ Spanish) Warranty Information (English/ French) Important Notice! (English/ French) ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

(2) ALPINE X-W12D4 12" 900w RMS Car Audio Subwoofers DVC Dual-4ohm X-Series Subs Built to take it Alpine redesigns its X-Series subwoofers to deliver even more impressive performance. The X-W12D4 12" subwoofer handles up to 900 watts RMS, so don't hesitate to give it plenty of juice. This rugged sub features a pulp/mica cone with a parabolic shape that maintains its rigidity and strength for outstanding response and accuracy. The big rubber surround supports the cone in the sub's cast aluminum frame, while Alpine's latest technology allows this sub to move an amazing amount of air (28mm Xmax, for you bass geeks out there) at very high levels while staying cool. Versatility You can wire the dual 4-ohm voice coils to get the optimum performance from your amp, or to configure a custom setup with multiple subwoofers. The X-W12D4 works well in sealed and ported enclosures so you can choose what kind of bass you want to hear and feel. Note: If you are wiring this DVC sub for lower impedance, ensure that your amp is compatible. Product highlights: 12" subwoofer with dual 4-ohm voice coils pulp/mica cone large HAMR rubber surround the cast-aluminum frame provides a rock-solid platform power handling: 900 watts RMS (450 watts per coil) peak power handling: 2700 watts frequency response: 22-200 Hz Xmax: 28mm top-mount depth: 7-1/4" warranty: 1 year Two 12" Dual 4-ohm voice coil subwoofer Grille (installed) X-Series Subwoofer Application Guide (English/ French) Online product registration information (English/ French/ Spanish) Warranty Information (English/ French) Important Notice! (English/ French) Note about installation without grille ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

(2) ALPINE X-W12D4 12" 900w RMS Car Audio Subwoofers+Vented Sub Box Enclosure Built to take it Alpine redesigns its X-Series subwoofers to deliver even more impressive performance. The X-W12D4 12" subwoofer handles up to 900 watts RMS, so don't hesitate to give it plenty of juice. This rugged sub features a pulp/mica cone with a parabolic shape that maintains its rigidity and strength for outstanding response and accuracy. The big rubber surround supports the cone in the sub's cast aluminum frame, while Alpine's latest technology allows this sub to move an amazing amount of air (28mm Xmax, for you bass geeks out there) at very high levels while staying cool. Versatility You can wire the dual 4-ohm voice coils to get the optimum performance from your amp or configure a custom setup with multiple subwoofers. The X-W12D4 works well in sealed and ported enclosures, so you can choose what kind of bass you want to hear and feel. Note: If you are wiring this DVC sub for lower impedance, ensure that your amp is compatible. Product highlights: 12" subwoofer with dual 4-ohm voice coils pulp/mica cone large HAMR rubber surround cast aluminum frame provides a rock-solid platform power handling: 900 watts RMS (450 watts per coil) peak power handling: 2700 watts frequency response: 22-200 Hz Xmax: 28mm top-mount depth: 7-1/4" warranty: 1 year Details: Package Includes: (2) Alpine 12" Car Audio Subwoofer (1) Dual 12" Vented Subwoofer Enclosure Box 1.55 CU FT 3/4" MDF 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are made of metal) 20 Feet of 14 AWG Blue Speaker Wire 4 Spade Terminals Description of X-W12D4: OVERVIEW The New X-Series subwoofers were developed from a sound philosophy we call Alpine ID a focus on highly accurate components built for superior imaging. A triple-stacked magnet surrounds an extended voice coil, allowing a very long excursion and resulting in huge air movement. A specialized CRC pole with integrated cooling fins and an aluminum shorting cap reduce the lag of coils alternating movement while also providing cooling within the motor. The cone structure is suspended by two spiders and our patented H.A.M.R. surround. The stability of the dual-spider, along with the even unfolding of the multi-roll surround, creates incredibly linear cone travel, free of any unneeded movement that causes distortion. The powerful and efficient motor, coupled with its highly-controlled suspension, gives the X-Series subwoofer the ability to create loud and accurate bass in a very small, sealed box. Only requiring one cubic foot of air space (.55 for the 10), the 12 X-Series subwoofer can reproduce frequencies down to 40 Hz before rolling off, leaving you with bass that digs deep and plenty of trunks. ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine R-S69C.2 Component System 600W Peak, 200W RMS R-Series 6x9" Component 2-Way Speakers + AudioControl DQDX Digital Signal Processor FOR LIVING LOUD AND HAVING FUN If you play your music loud and want others to know, the R-Series speakers match you. You will enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. MORE OUTPUT FOR MORE FUN The woofers have a large, 35-millimeter (mm) voice coil, allowing more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling for superior control and output. The R-Series speakers incorporate Alpine’s patented High-Amplitude Multi-Roll Surround (H.A.M.R.) for control and accuracy. The component models use a crossover with an in-line, passive design and reduced footprint, contributing to easier installation. EXCLUSIVE CONE TECHNOLOGY The R-Series speakers use Alpine’s exclusive cone technology, Carbon Fiber Reinforced Polymer (CFRP), a high-strength, lightweight material. CFRP can be custom formed so that its fibers align in the same direction as the curve and shape of the cone, thereby reducing resonant peaks and increasing the speakers’ mid-bass performance and dynamic range. CFRP is also used as a tweeter diaphragm, enabling the speakers to perform into the 45kHz range and making them compliant with High-Resolution Audio playback. BETTER FITMENT WITHOUT SACRIFICING MOTOR FORCE The R-Series speakers use a neodymium magnet which gives them a shorter overall height, compared to other speaker brands. The R-Series speakers also use a new, shallower grill design. The result: An improved fitment design that lets the R-Series speakers fit into tighter install locations without sacrificing motor force. Product Details: Alpine R-S69C.2 Alpine R-Series 6"x9" 2-Way Component Car Speakers (Pair) Power Handling: RMS: 100 Watts Peak: 300 Watts Impedance: 4 Ohms Carbon-fiber reinforced polymer (CFRP) woofer Carbon-fiber reinforced polymer dome tweeter Frequency response: 60Hz - 40 kHz Sensitivity: 90 dB Top-mount depth: 2-7/8" Grilles included Authorized Dealer 1-year Manufacturer's Warranty What is in the R-S69C.2 package: 2 Woofers 2 Woofer grilles 2 Grille badges 2 Tweeters (each has an attached 30" length of wire) 2 Tweeter grilles (installed) 2 Swivel flush mount housings (with tweeters installed) Two crossovers (each has attached input and output wires) 2 Flush mount retention rings 2 Stealth brackets 2 Foam self-adhesive pads 2 Foam self-adhesive rings Eight 1-1/8" Screws 8 Speed-clips Eight M4x60mm Machine screws 8 Nuts 8 Flat washers 8 Split lock washers Four 5" Zip ties 2 Pieces of two-sided tape Warranty information Online product registration notes Important Notice sheet Template and specs on the box R-S69C.2 Owner’s Manual AudioControl DQDX Black 6 Channel Performance Digital Signal Processor Designed for maximum sound quality & enhanced audio performance, the DQDX is the latest AudioControl processor to incorporate Signal Delay. This process corrects for the varying speaker locations in the vehicle.   General Features: black 6-channel digital sound processor with EQ, crossover, and signal delay 24 dB/octave Linkwitz-Riley crossover selectable crossover frequency: 50-500 Hz separate 7-band graphic EQ for front/rear/subwoofer front/rear/subwoofer level matching with input/output level controls L/R: 10ms Front/sub: 35ms high voltage line driver (maximum output level: 7.5Vrms ACR-3 Dash Control Remote included 12-volt 1-amp turn-on lead output frequency response: 10-22,000 Hz recommended fuse: 2-amp dimensions: 10-1/4"W x 1-3/8"H x 6-1/4"D weight: 3 lbs. warranty: 5 years What is in the DQDX package: 6-Channel DSP/Equalizer/Crossover ACR-3 wired remote control 19.5' Remote cable (RJ-14 plug on both ends) Owner's manual QC checklist Quick reference card ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-S65C 480W Peak (160W RMS) 6.5" Component Type  S-Series  2-way Component Speaker set with 1" Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features: 6-1/2" S Series 2-way Component System Car Speakers Power Handling: Polypropylene-Mica cone material Rubber speaker surround 1" Silk Dome Tweeters H.A.M.R. (High Amplitude Multi-Roll) surround First Carbon Fiber Reinforced Plastic (CFRP) 1.38" Voice coil magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Speaker grilles are sold separately Authorized Internet Dealer 1-year Manufacture Electronix Warranty What is in the S-S65C package: S-S65C owner's manual 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Eight 1-3/16" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine X-S69C 6" x 9" Component System 720W Max, 240W RMS 6" x 9" X-Type 2-Way Component Car Speakers EXPERIENCE DETAIL YOU’VE NEVER HEARD BEFORE The new X-Series speakers combine proven technologies, superior materials, and innovative design to reproduce sound so accurately that you’ll feel right in front of the performance. HI-RESOLUTION AUDIO Hi-Res Audio is the next level of digital audio for music fans alike and requires an incredibly wide dynamic range to reproduce music with amazing realism and depth. The X-Series speakers are Hi-Rez compatible and, when paired with other X-Series components, provide an incredible Hi-Rez Audio experience. CARBON GRAPHITE TWEETER The tweeter’s diaphragm is built from a sheet of carbon graphite which enables it to reproduce frequency ranges in the upper 55kHz range, usually achieved using a harsher, hard dome tweeter like Aluminum or Titanium. Carbon graphite allows us to hit those High-rez audio-compatible frequencies while maintaining the softer, more damped sound qualities of a soft dome. NEW CONE MATERIAL The X-Series speaker cone is made from a tightly interwoven Nano-fiber material. The small diameter fibers create a damped, rigid cone structure while staying lightweight. Because of this light rigidity, the X-Series speaker can produce highly accurate sound while maintaining a soft tonality. The cone’s resistance to flex ensures it is very little to no discoloration of sound and phase shifts. The result is a highly accurate speaker that is well-staged in front of you. General Features: 6" x 9" X-Type 2-Way Component System Power Handling: Max: 720 W per set/ 360 W per side RMS: 240 W per set/ 120 W per side Recommended power range: 10 - 120W RMS Hi-Res Audio compatible Nano-fiber woofer cone H.A.M.R. surround 1" carbon graphite tweeter Tweeters swivel within flush mounts Adjustable tweeter attenuation: 0dB, +3dB, -3dB Adjustable tweeter phase: Normal or reverse A-Pole type neodymium magnet Top-mount depth: 3-1/16" Cutout Dimensions: 5-7/8" x 8-7/8" 4 ohms impedance Frequency Response: 45 - 50,000 Hz Sensitivity: 89 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the X-S69C package 2 Woofers 2 Woofer grilles+ 2 Grille badges 2 Tweeters (each has a 26" length of wire attached) 2 Tweeter grilles (installed) 2 Surface mount housings (with tweeters installed) 2 Bottom mount brackets Two tweeter crossovers (each has attached 32" input and 14" output wires) 2 Rectangular adhesives backed pads (crossover) 2 Circular adhesive-backed discs (tweeter) Eight M4x60mm Machine screws (with washers attached) 8 Flat washers & 8 Split lock washers Eight 1-1/8" Screws & Eight 5/8" Screws 8 Speed-clips & 4 Speed nuts Four 5" Zip ties Warranty information Important Notice Online product registration information Templates and specs on the box X-S69C owner’s Manual ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

(2) Pairs ALPINE X-S69C 6x9" 360w Component Car Speakers+Alpine X-A70F 4-Ch Amplifier Alpine X-S69C X-Series 6"x9" component speaker system Premium Alpine components If you've been an Alpine devotee from car to car, their X-Series speakers are your opportunity to take the leap to premium sound. Designed with a laser-focus on superior imaging, this 6"x9" component speaker system will bring out the very best in your audio system. And an all-new magnet design in a cast aluminum frame allows these speakers to have a low profile, so they can fit in a wide array of vehicles. All about the build Alpine uses a powerful magnet and a super-efficient motor structure to make the 6"x9" woofer really strong in the lower frequencies. The woofer cone itself uses a specialized fiber for extreme rigidity while Alpine's proprietary High Amplitude Multi-Roll surround ensures durability in the face of extreme temperatures. Serious power handling The separate 1" carbon graphite dome tweeter handles the high frequencies with satisfying accuracy, and its extended frequency response lends a sense of realism and atmosphere unmatched by lesser tweeters. Driven by an aftermarket amplifier, you'll really have a soaring system, thanks to power handling up to a whopping 120 watts RMS. Product highlights: component speaker system includes two woofers, two tweeters and two external crossover systems 6"x9" nano-fiber woofer with High Amplitude Multi-Roll surround 1" carbon graphite dome tweeter handles up to 120 watts RMS (360 watts peak power) frequency range: 45-50,000 Hz sensitivity: 89 dB woofer top-mount depth: 3-1/8" grilles included warranty: 1 year MFR # X-S69C 2 Woofers 2 Woofer grilles 2 Grille badges 2 Tweeters (each has a 26" length of wire attached) 2 Tweeter grilles (installed) 2 Surface mount housings (with tweeters installed) 2 Bottom mount brackets Two tweeter crossovers (each has attached 32" input and 14" output wires) 2 Rectangular adhesive backed pads (crossover) 2 Circular adhesive backed discs (tweeter) Eight M4x60mm Machine screws (with washers attached) 8 Flat washers 8 Split lock washers Eight 1-1/8" Screws Eight 5/8" Screws 8 Speed-clips 4 Speed nuts Four 5" Zip ties Warranty information Important Notice On-line product registration information Templates and specs on box Alpine X-A70F X-Series 4-channel car amplifier — 120 watts RMS x 4 Good music needs big power Alpine's X-Series X-A90F car amplifier will sharpen the focus of your music's stereo image, almost like the musicians are playing inside your car. This 4-channel amplifier puts out 120 watts RMS per channel, so you can be sure you'll get the big sound you want. You can also use this amp in 2-channel mode to power a couple subwoofers with 350 watts RMS each. Speaker-level inputs allow you to add this amp to almost any system, even one with a factory radio. High-tech Class-D innards Beefy internal components and the cleverly designed Thermal Flow chassis help the amp produce its power efficiently, with little excess heat or stress to your vehicle's electrical system. Alpine designed this amp to exert tight control over speaker cones and deliver a very wide frequency response, so you'll experience a very realistic soundstage. A special comparator circuit corrects the output using the original input signal, minimizing phase issues for precise, high-fidelity sound.   Hidden controls and plug-in connectors The amp's tuning controls sit protected under a removable top panel. Nifty speaker and power wire plugs make it easy to install or remove the amp, while ensuring tight connections and guaranteeing that your speakers work in unison. Gold-plated RCA inputs, outputs, and power connections resist corrosion and signal degradation. For a creative touch, you can paint the amp's trim panels to match or contrast with your vehicle's interior decor. Product highlights: 4-channel car amplifier 120 watts RMS x 4 at 4 ohms (175 watts RMS x 4 at 2 ohms) 350 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode) CEA-2006 compliant Class-D amplifier technology frequency response: (+0/-1 dB) 15 to 30,000 Hz variable high- and low-pass filters (50-400 Hz, 12 dB/octave) preamp and speaker-level inputs speaker-level inputs require speaker wire to RCA adapters quick-connect speaker connectors fit wire up to 8-gauge optional RUX-KNOB.2 wired remote level control for bridged channels 3/4 fuse rating: 35A x 2 wiring and hardware not included with amplifier 4-gauge power and ground wire recommended 11-3/4"W x 2"H x 7-5/8"D warranty: 1 year MFR # X-A70F 4-Channel amplifier Two 35A ATO fuses (installed) Terminal Cover Left Terminal Cover Right Terminal Cover Front Battery connector plug 2 Speaker connector plugs Logo Plate (self-adhesive) 4 Self-tapping screws (Length 3/4") 2mm Allen wrench 4mm Allen wrench Owner's Manual Alpine Verification Certificate Limited Warranty To Customers sheet Thank you note ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 x Alpine SPR-10TW 1" 450 Watt Silk Dome Pair Car Stereo Tweeters With Crossovers THE POWER OF THE EQ RINGAlpine’s new EQ Ring improves the tweeter’s dispersion characteristics, providing an excellent off-axis response. This means that no matter where you place your new Type R tweeters, they will maintain their wide, flat frequency response. ULTIMATE POWER HANDLINGType-R is known for its legendary power handling capabilities, and the new Type-R tweeter is no exception. Its copper-clad aluminum voice coil, copper shorting cap, high-grade neodymium magnet, and aluminum bobbin combine to deliver best-in-class power handling of 150 watts RMS and 450 watts peak, so turn up the volume! General Features: 1" Type-R Series Car Tweeters Power Handling: Peak: 450 watts per pair / 225 watts each RMS: 150 watts per pair / 75 watts each Silk Dome tweeter construction 4 ohms impedance Copper-Clad Aluminum high-temperature voice coil 75% smaller external crossover filter removes harmful frequencies 4-way tweeter level attenuation High-grade Neodymium magnet structure Surface / Bottom / Flush Mountable CEA-2031 compliant speakers Sensitivity: 88dB Frequency response: 1,000-29,000 Hz Top-mount depth: 11/16" Authorized Internet Dealer What's Included? (1 PAIR) ALPINE SPR-10TW 1" Type-R Series Silk Dome Tweeter Set with Crossover Filters Owners Manual Installation Hardware Details: Tweeter Size: 1" Impedance (Per Voice Coil): 4 ohms Sensitivity: 88 dB Frequency Response: 1,000 - 29,000 Hz Tweeter Design: Dome Tweeter Composition: Silk Surface, Bottom, and Flush Mountable Angled Mount: No Top-Mount Depth: 11/16" Cutout Dimensions: 2" x 2" ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Alpine R-S68 Bundle - Two pairs of Alpine R-S68 6x8 / 5x7 Inch Coaxial 2-Way Speakers This bundle contains two pairs of Alpine R-S68 R-Series 6x8" (5x7") Coaxial 2-Way Speaker SetsAlpine R-S68 R-Series 6x8-inch (5x7) Coaxial 2-Way SpeakersType-R speakers have been known for their dependability and sound performance at a mid-line price. Chances are, you've heard the Type-R speakers and appreciated the loud & fun listening experience.Using the highly successful Type-R speakers as a foundation, we applied various performance and hardware improvements to the design, essentially transforming them into the new R-Series speakers The Next Evolution of Proven Performance.BUILDING ON AN ICONIC SPEAKERThe Type-R speaker has been an iconic part of the car audio industry for many years but it was time for a modernization of the brand. Type-R speaker performance was certainly top notch but there is always room for improvement. Rather than redesigning the speakers from scratch, we kept the fundamental Type-R sound & style characteristics and updated them.MORE REALISTIC HIGHSThe R-Series speakers use a new ring-type tweeter voice coil for increased efficiency and better tonal balance across the entire sound band, for improved overall sound quality.A MORE BALANCED TRANSITIONAs with many high-end speakers, the Type-R components incorporate Wave Guide technology in the form of a phase plug in the center of the woofer cone. The WaveGuide enhances in-car sound dispersion and helps eliminate phase distortion. Alpine's unique Dynamic eXpander ring stiffens the cone around the Wave Guide, eliminating a big source of distortion in typical designs caused by cone flexing. General Features: 6"x8" 2-way car speakers (pair) 6" x 8" R-Type 2-Way Coaxial Car Speakers Power Handling: Peak: 600W per pair/ 300W each RMS: 200W per pair/ 100W each Recommended power range: 10 - 100W RMS Multi-layer hybrid fiber cone H.A.M.R. surround 1" Silk dome tweeter Tweeter swivels to give better control of your sound Large square wire dual-layer voice coil High-performance linear drive motor Top-mount Depth: 2-9/16" Cutout Dimensions: 5-1/16" x 7-1/4" 4 ohms impedance Frequency Response: 63 - 29,000 Hz Sensitivity: 89dB Authorized Internet Dealer grilles not included warranty: 1 year What is in the Alpine R-S68 package: Alpine R-S68 owner's manual Two 2-way Speakers Eight 1-1/8" Screws 8 Speed clips Warranty information Important Notice Online product registration information Template and specs on the box ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov