All Portable Speakers (174)

2 MR DJ PSS-1000 Single 10" Passive 1200 Watts 2-Way DJ/PA PRO Audio Loudspeaker More Than Just Another Great MR DJ Sound System, The New MR DJ USA Professional PSS Series Does Everything You Demand in a No-Compromise Family of Professional Loudspeakers. These Speakers Solve Every Performance and Installation Challenge You Have. They are High-Performance in Every Sense: Their New Transducers and Amplifiers Enable Them to Play Extremely Loud and Clear, Without Compromise or Restriction. And They are "High-Performance" From a Concept and Manufacturing Standpoint. MR Dj Pro Passive Speakers Use the Latest Technologies in Cabinet Materials, Woofer, Design, And Sonic Clarity Delivering Amazing High-End Sound Quality for Nearly Any Application. This Rugged 2-Way Passive PA Speaker for Club Date and Lecture/Announcement Speech Applications. MR DJ Made Sure That Every Aspect of Their Design Outperformed What It Had to Do. The result is Loudspeakers That Achieve a Level of Excellence and Refinement That Defies Expectations. Defies Your Expectations. Designed and Tuned in the USA General Features: A Professional Grade Single 10" Speaker PSS PRO Speaker Series Single 10" Dj Speaker Loudspeaker Rugged 2-Way Passive PA Speaker for Club Date and Lecture/Announcement Speech Applications Construction: Top Quality MDF - Stapled, Bonded & Braced Passive Full Range System for Medium Size Applications. First Class Mechanical Manufacturing for Day-To-Day Operations. Durable, Carpet-Covered Particle Board Enclosure Construction Integral Pole Socket for Speaker Stands Heavy-Duty Side-Mounted Steel Carrying Handles Power Handling: 1200 Watts Peak 1" Kapton Voice Coils 8" X 15" Dome Tweeter Mated to Constant Directivity Horn 40 Oz.  High-Efficiency Woofer Magnet Speakon In/Out, 1/4" In/Out, and Banana Output  Connections Make It Easy to Connect with Other Speakers and Amplifiers 8 Ohms Impedance Crossover: Yes, Overload Protected The Rugged Construction with Black Carpet Finish, The Heavy-Duty Metal Grille Dimensions:  Designed and Tuned in the USA ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

2 MR DJ PSS-1200 Single 12" Passive 1200 Watts 2-Way DJ/PA PRO Audio Loudspeaker More Than Just Another Great MR DJ Sound System, The New MR DJ USA Professional PSS Series Does Everything You Demand in a No-Compromise Family of Professional Loudspeakers. These Speakers Solve Every Performance and Installation Challenge You Have. They are High-Performance in Every Sense: Their New Transducers and Amplifiers Enable Them to Play Extremely Loud and Clear, Without Compromise or Restriction. And They are "High-Performance" From a Concept and Manufacturing Standpoint. MR Dj Pro Passive Speakers Use the Latest Technologies in Cabinet Materials, Woofer, Design, And Sonic Clarity Delivering Amazing High-End Sound Quality for Nearly Any Application. This Rugged 2-Way Passive PA Speaker for Club Date and Lecture/Announcement Speech Applications. MR DJ Made Sure That Every Aspect of Their Design Outperformed What It Had to Do. The result is Loudspeakers That Achieve a Level of Excellence and Refinement That Defies Expectations. Defies Your Expectations. Designed and Tuned in the USAGeneral Features: A Professional Grade Single 12" Speaker PSS PRO Speaker Series Single 12" Dj Speaker Loudspeaker Rugged 2-Way Passive PA Speaker for Club Date and Lecture/Announcement Speech Applications Construction: Top Quality MDF - Stapled, Bonded & Braced Passive Full Range System for Medium Size Applications. First Class Mechanical Manufacturing for Day-To-Day Operations. Durable, Carpet-Covered Particle Board Enclosure Construction Integral Pole Socket for Speaker Stands Heavy-Duty Side-Mounted Steel Carrying Handles Power Handling: 1200 Watts Peak 2" Kapton Voice Coils 8" X 15" Dome Tweeter Mated to Constant Directivity Horn 40 Oz.  High-Efficiency Woofer Magnet Speakon In/Out, 1/4" In/Out, and Banana Output  Connections Make It Easy to Connect with Other Speakers and Amplifiers 8 Ohms Impedance Crossover: Yes, Overload Protected The Rugged Construction with Black Carpet Finish, The Heavy-Duty Metal Grille Dimensions: 22.04"D X 19"W X 33.26"H Designed and Tuned in the USA 1 year manufactures warranty ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

MR DJ PSS-1200 Single 12" Passive 1200 Watts 2-Way DJ/PA PRO Audio Loudspeaker More Than Just Another Great MR DJ Sound System, The New MR DJ USA Professional PSS Series Does Everything You Demand in a No-Compromise Family of Professional Loudspeakers. These Speakers Solve Every Performance and Installation Challenge You Have. They are High-Performance in Every Sense: Their New Transducers and Amplifiers Enable Them to Play Extremely Loud and Clear, Without Compromise or Restriction. And They are "High-Performance" From a Concept and Manufacturing Standpoint. MR Dj Pro Passive Speakers Use the Latest Technologies in Cabinet Materials, Woofer, Design, And Sonic Clarity Delivering Amazing High-End Sound Quality for Nearly Any Application. This Rugged 2-Way Passive PA Speaker for Club Date and Lecture/Announcement Speech Applications. MR DJ Made Sure That Every Aspect of Their Design Outperformed What It Had to Do. The result is Loudspeakers That Achieve a Level of Excellence and Refinement That Defies Expectations. Defies Your Expectations. Designed and Tuned in the USAGeneral Features: A Professional Grade Single 12" Speaker PSS PRO Speaker Series Single 12" Dj Speaker Loudspeaker Rugged 2-Way Passive PA Speaker for Club Date and Lecture/Announcement Speech Applications Construction: Top Quality MDF - Stapled, Bonded & Braced Passive Full Range System for Medium Size Applications. First Class Mechanical Manufacturing for Day-To-Day Operations. Durable, Carpet-Covered Particle Board Enclosure Construction Integral Pole Socket for Speaker Stands Heavy-Duty Side-Mounted Steel Carrying Handles Power Handling: 1200 Watts Peak 2" Kapton Voice Coils 8" X 15" Dome Tweeter Mated to Constant Directivity Horn 40 Oz.  High-Efficiency Woofer Magnet Speakon In/Out, 1/4" In/Out, and Banana Output  Connections Make It Easy to Connect with Other Speakers and Amplifiers 8 Ohms Impedance Crossover: Yes, Overload Protected The Rugged Construction with Black Carpet Finish, The Heavy-Duty Metal Grille Dimensions: 22.04"D X 19"W X 33.26"H Designed and Tuned in the USA ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

MR DJ PSS-1000 Single 10" Passive 1200 Watts 2-Way DJ/PA PRO Audio Loudspeaker More Than Just Another Great MR DJ Sound System, The New MR DJ USA Professional PSS Series Does Everything You Demand in a No-Compromise Family of Professional Loudspeakers. These Speakers Solve Every Performance and Installation Challenge You Have. They are High-Performance in Every Sense: Their New Transducers and Amplifiers Enable Them to Play Extremely Loud and Clear, Without Compromise or Restriction. And They are "High-Performance" From a Concept and Manufacturing Standpoint. MR Dj Pro Passive Speakers Use the Latest Technologies in Cabinet Materials, Woofer, Design, And Sonic Clarity Delivering Amazing High-End Sound Quality for Nearly Any Application. This Rugged 2-Way Passive PA Speaker for Club Date and Lecture/Announcement Speech Applications. MR DJ Made Sure That Every Aspect of Their Design Outperformed What It Had to Do. The result is Loudspeakers That Achieve a Level of Excellence and Refinement That Defies Expectations. Defies Your Expectations. Designed and Tuned in the USA General Features: A Professional Grade Single 10" Speaker PSS PRO Speaker Series Single 10" Dj Speaker Loudspeaker Rugged 2-Way Passive PA Speaker for Club Date and Lecture/Announcement Speech Applications Construction: Top Quality MDF - Stapled, Bonded & Braced Passive Full Range System for Medium Size Applications. First Class Mechanical Manufacturing for Day-To-Day Operations. Durable, Carpet-Covered Particle Board Enclosure Construction Integral Pole Socket for Speaker Stands Heavy-Duty Side-Mounted Steel Carrying Handles Power Handling: 1200 Watts Peak 1" Kapton Voice Coils 8" X 15" Dome Tweeter Mated to Constant Directivity Horn 40 Oz.  High-Efficiency Woofer Magnet Speakon In/Out, 1/4" In/Out, and Banana Output  Connections Make It Easy to Connect with Other Speakers and Amplifiers 8 Ohms Impedance Crossover: Yes, Overload Protected The Rugged Construction with Black Carpet Finish, The Heavy-Duty Metal Grille Dimensions:  Designed and Tuned in the USA ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

Peavey Dark Matter DM 115 Powered Speaker In 1975, Peavey revolutionized the working man's loudspeaker with the SP®1. Now, Peavey does it again with the Dark Matter series of enclosures. Thanks to its new advanced DSP-equipped power section, the high-S.P.L. (Sound Pressure Level) Dark Matter series outperforms any existing enclosure in its category. The Dark Matter LCD display and associated selector knob allow users to choose various parameters of operation for the DSP-based EQ. This includes bass and treble control access, as well as EQ presets for different applications or speaker positions/locations. These presets provide users with a highly flexible method of configuring the powered speaker system for specific use with minimal time and effort. Fan cooled for maximum reliability, the DM 115 features Peavey's exclusive Quadratic Throat Waveguide™ technology that helps deliver pristine, precise sound. The ultra-reliable Dark Matter series enclosures are built tough with steel grilles and rugged injection molded cabinets. Their convenient design allows for use as floor monitors or pole-mounted speakers. Perfect for band, DJ, or other musical applications, the Dark Matter enclosures produce crystal clear professional audio. General Feature: Two-way bi-amplified analog amp powered speaker system DX™14 compression driver, with 1.4-inch titanium diaphragm 15" heavy-duty woofer DSP processing is 64-bit double precision Dynamic bass boost function Input is via a combo female XLR and 1/4" TRS phone jack with balanced input Thru output is via a male XLR jack Exclusive Quadratic Throat Waveguide™ technology, 110 by 80-degree coverage A Mic/Line switch provides for two different gain settings Rugged plastic injection-molded trapezoidal enclosure DSP I/O is at 96 kHz and 24 bits, with low-jitter, professional-grade components Cabinet has dual rear corner angled sides for floor monitor use. Fan cooled for maximum reliability Full-coverage perforated steel grille, with powder coat finish Multiple Factory Preset EQ settings for the DSP crossover system Pole mount molded-in for 1 3/8" diameter poles User Preset EQ storage provisions allow storing custom presets for later recall Weight Unpacked: 42.11 lb(19.1 kg) Weight Packed: 51.00 lb(23.133 kg) Width Packed: 18.875"(47.9425 cm) Height Packed: 30.5"(77.47 cm) Depth Packed: 17.562"(44.60748 cm) ⚠️Wrning:This product can expose you to [name of chemical], which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

  (2) PVXP12 DSP 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj Speaker Stands+XLR Cable Peavey PVX 12 DSP 830W 12-inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 12 DSP loudspeaker provides the sound reinforcement you need. Pumping a muscular 830 watts through a powerful 12" woofer and 1.4" titanium compression driver, the PVXp 12 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 12 DSP's durability, allowing it to easily withstand the routine wear comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 12 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. Peavey built the PVXp 12 DSP to be as lightweight as possible without sacrificing durability. What's more, the PVXp 12 DSP features several molded-in cabinet handles for extra grab-and-go convenience. And when it comes to flying PVXp 12 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVX 12 DSP speakers are so lightweight you may just be tempted to throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 12 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 12 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or need a good speaker for speech sound reinforcement, your Peavey PVXp 12 DSP will do the trick. It packs 830 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 12 DSPs can easily cover audiences in the hundreds. Additionally, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 12 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 12 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 12 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVX 12 DSP Features: 12" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 10 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts An extra angled section on the right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 12" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 51Hz-20kHz Frequency Response: 60Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 24.5" Width: 16.1" Depth: 15" Weight: 43 lbs. Manufacturer Part Number: 03616450 ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

(2) PVXP15 DSP 15 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj Speaker Stands+XLR Cable Peavey PVXp 12 DSP 830W 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 12 DSP loudspeaker provides you with the sound reinforcement you need. Pumping a muscular 830 watts through a powerful 12" woofer and 1.4" titanium compression driver, the PVXp 12 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 12 DSP's durability, allowing it to easily withstand the routine wear that comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 12 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. That's why Peavey built the PVXp 12 DSP to be as lightweight as possible without sacrificing durability. What's more, the PVXp 12 DSP features a number of molded-in cabinet handles for extra grab-and-go convenience. And when it comes to flying PVXp 12 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 12 DSP speakers are so lightweight, you may just be tempted to literally throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 12 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 12 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or just need a good speaker for speech sound reinforcement, your Peavey PVXp 12 DSP will do the trick. It packs 830 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 12 DSPs can easily cover audiences in the hundreds. What's more, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 12 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 12 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 12 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 12 DSP Features: 12" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 10 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles, with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts Extra angled section on right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 12" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 51Hz-20kHz Frequency Response: 60Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 24.5" Width: 16.1" Depth: 15" Weight: 43 lbs. Manufacturer Part Number: 03616450 ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVXP15 DSP 15 inch Powered Speaker 800W 15" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj XLR Cables Peavey PVXp15-DSP 800W 15 inch Powered Speaker 800W 15" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 15 DSP loudspeaker provides you with the sound reinforcement you need. Pumping a muscular 800 watts through a powerful 15" woofer and 1.4" titanium compression driver, the PVXp 15 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 15 DSP's durability, allowing it to easily withstand the routine wear that comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 15 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. That's why Peavey built the PVXp 15 DSP to be as lightweight as possible without sacrificing durability. What's more, the PVXp 15 DSP features a number of molded-in cabinet handles for extra grab-and-go convenience. And when it comes to flying PVXp 15 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 15 DSP speakers are so lightweight, you may just be tempted to literally throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 15 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 15 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or just need a good speaker for speech sound reinforcement, your Peavey PVXp 15 DSP will do the trick. It packs 800 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 15 DSPs can easily cover audiences in the hundreds. What's more, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 15 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 15 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 15 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 15 DSP Features: 15" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 15 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles, with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts Extra angled section on right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 15" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 49Hz-20kHz Frequency Response: 58Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 28.25" Width: 18.9" Depth: 18.7" Weight: 51 lbs. Manufacturer Part Number: 03616470 ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Peavey PVXP15 DSP 15 inch Powered Speaker 800W 15" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj Speaker Stand Peavey PVXp15-DSP 800W 15 inch Powered Speaker 800W 15" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 15 DSP loudspeaker provides you with the sound reinforcement you need. Pumping a muscular 800 watts through a powerful 15" woofer and 1.4" titanium compression driver, the PVXp 15 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 15 DSP's durability, allowing it to easily withstand the routine wear that comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 15 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. That's why Peavey built the PVXp 15 DSP to be as lightweight as possible without sacrificing durability. What's more, the PVXp 15 DSP features a number of molded-in cabinet handles for extra grab-and-go convenience. And when it comes to flying PVXp 15 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 15 DSP speakers are so lightweight, you may just be tempted to literally throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 15 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 15 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or just need a good speaker for speech sound reinforcement, your Peavey PVXp 15 DSP will do the trick. It packs 800 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 15 DSPs can easily cover audiences in the hundreds. What's more, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 15 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 15 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 15 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 15 DSP Features: 15" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 15 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles, with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts Extra angled section on right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 15" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 49Hz-20kHz Frequency Response: 58Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 28.25" Width: 18.9" Depth: 18.7" Weight: 51 lbs. Manufacturer Part Number: 03616470 ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Peavey PVXP15 DSP 15 inch Powered Speaker 800W 15" Powered Speaker with 1.4" Compression Driver, Peavey PVXp15-DSP 800W 15 inch Powered Speaker 800W 15" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 15 DSP loudspeaker provides you with the sound reinforcement you need. Pumping a muscular 800 watts through a powerful 15" woofer and 1.4" titanium compression driver, the PVXp 15 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 15 DSP's durability, allowing it to easily withstand the routine wear that comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 15 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. That's why Peavey built the PVXp 15 DSP to be as lightweight as possible without sacrificing durability. What's more, the PVXp 15 DSP features a number of molded-in cabinet handles for extra grab-and-go convenience. And when it comes to flying PVXp 15 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 15 DSP speakers are so lightweight, you may just be tempted to literally throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 15 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 15 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or just need a good speaker for speech sound reinforcement, your Peavey PVXp 15 DSP will do the trick. It packs 800 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 15 DSPs can easily cover audiences in the hundreds. What's more, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 15 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 15 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 15 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 15 DSP Features: 15" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 15 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles, with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts Extra angled section on right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 15" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 49Hz-20kHz Frequency Response: 58Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 28.25" Width: 18.9" Depth: 18.7" Weight: 51 lbs. Manufacturer Part Number: 03616470 ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

  (2) PVXP15 DSP 15 inch Powered Speaker 830W 15" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj XLR Cables Peavey PVXp 12 DSP 830W 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 12 DSP loudspeaker provides you with the sound reinforcement you need. Pumping a muscular 830 watts through a powerful 12" woofer and 1.4" titanium compression driver, the PVXp 12 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 12 DSP's durability, allowing it to easily withstand the routine wear that comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 12 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. That's why Peavey built the PVXp 12 DSP to be as lightweight as possible without sacrificing durability. What's more, the PVXp 12 DSP features a number of molded-in cabinet handles for extra grab-and-go convenience. And when it comes to flying PVXp 12 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 12 DSP speakers are so lightweight, you may just be tempted to literally throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 12 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 12 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or just need a good speaker for speech sound reinforcement, your Peavey PVXp 12 DSP will do the trick. It packs 830 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 12 DSPs can easily cover audiences in the hundreds. What's more, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 12 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 12 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 12 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 12 DSP Features: 12" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 10 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles, with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts Extra angled section on right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 12" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 51Hz-20kHz Frequency Response: 60Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 24.5" Width: 16.1" Depth: 15" Weight: 43 lbs. Manufacturer Part Number: 03616450 ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

  (2) PVXP12 DSP 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj XLR Cable Peavey PVXp 12 DSP 830W 12-inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 12 DSP loudspeaker provides the sound reinforcement you need. Pumping a muscular 830 watts through a powerful 12" woofer and 1.4" titanium compression driver, the PVXp 12 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 12 DSP's durability, allowing it to easily withstand the routine wear that comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 12 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. Peavey built the PVXp 12 DSP to be as lightweight as possible without sacrificing durability. What's more, the PVXp 12 DSP features several molded-in cabinet handles for extra grab-and-go convenience. And when it comes to flying PVXp 12 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 12 DSP speakers are so lightweight you may just be tempted to throw them in the back of your truck literally. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 12 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 12 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or need a good speaker for speech sound reinforcement, your Peavey PVXp 12 DSP will do the trick. It packs 830 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 12 DSPs can easily cover audiences in the hundreds. Additionally, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 12 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 12 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 12 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 12 DSP Features: 12" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 10 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts The extra angled section on the right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 12" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 51Hz-20kHz Frequency Response: 60Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 24.5" Width: 16.1" Depth: 15" Weight: 43 lbs. Manufacturer Part Number: 03616450 ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVXP12 DSP 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj XLR Cable Peavey PVXp 12 DSP 830W 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 12 DSP loudspeaker provides you with the sound reinforcement you need. Pumping a muscular 830 watts through a powerful 12" woofer and 1.4" titanium compression driver, the PVXp 12 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 12 DSP's durability, allowing it to easily withstand the routine wear that comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 12 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. That's why Peavey built the PVXp 12 DSP to be as lightweight as possible without sacrificing durability. What's more, the PVXp 12 DSP features a number of molded-in cabinet handles for extra grab-and-go convenience. And when it comes to flying PVXp 12 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 12 DSP speakers are so lightweight, you may just be tempted to literally throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 12 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 12 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or just need a good speaker for speech sound reinforcement, your Peavey PVXp 12 DSP will do the trick. It packs 830 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 12 DSPs can easily cover audiences in the hundreds. What's more, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 12 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 12 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 12 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 12 DSP Features: 12" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 10 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles, with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts Extra angled section on right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 12" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 51Hz-20kHz Frequency Response: 60Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 24.5" Width: 16.1" Depth: 15" Weight: 43 lbs. Manufacturer Part Number: 03616450 ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Peavey PVXP12 DSP 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj Speaker Stand Peavey PVXp 12 DSP 830W 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 12 DSP loudspeaker provides you with the sound reinforcement you need. Pumping a muscular 830 watts through a powerful 12" woofer and 1.4" titanium compression driver, the PVXp 12 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 12 DSP's durability, allowing it to easily withstand the routine wear that comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 12 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. That's why Peavey built the PVXp 12 DSP to be as lightweight as possible without sacrificing durability. What's more, the PVXp 12 DSP features a number of molded-in cabinet handles for extra grab-and-go convenience. And when it comes to flying PVXp 12 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 12 DSP speakers are so lightweight, you may just be tempted to literally throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 12 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 12 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or just need a good speaker for speech sound reinforcement, your Peavey PVXp 12 DSP will do the trick. It packs 830 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 12 DSPs can easily cover audiences in the hundreds. What's more, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 12 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 12 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 12 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 12 DSP Features: 12" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 10 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles, with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts Extra angled section on right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 12" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 51Hz-20kHz Frequency Response: 60Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 24.5" Width: 16.1" Depth: 15" Weight: 43 lbs. Manufacturer Part Number: 03616450 ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Mackie Thump12A Powered 12-Inch 1300 Watt PA DJ Loudspeaker with High-Performance Amplifiers Built-in Mixers and Power Factor Correction with MR DJ Heavy Duty Aluminum Speaker Stands with 1/4 inch Cables, Carrying Case, & 2 XLR Cables Bundle Delivering proven, chest-thumping low-end in an extremely affordable package; the 1300W Thump12A 12” Powered Loudspeaker has been redesigned from the ground up to sound better than ever. Thump features an all-new amplifier design with Dynamic Bass Response for the chest-thumping low end. Plus, the flexible built-in 2 channel mixer features Vita preamps with Wide-Z technology that handles mic, instrument or line signals with ease. Application-specific speaker modes let you dial in the system at the push of a button. With an all-new professional enclosure and robust system protection, you can walk into your next gig with confidence. General Features: 1,300 watts of high-output power in a portable package Class D amplifier with Dynamic Bass Response yields detailed midrange and abundant bass that are ideal for small venues 12 in. high-output woofer and 1.4 in. titanium dome compression driver Built-in 2-channel mixer features Vita preamps with Wide-Z technology that handle mic, instrument, and line-level signals XLR thru output for wired connection to other Thump speakers Integrated precision crossover and transducer time-alignment deliver outstanding sound quality 4 application-specific speaker modes ensure outstanding sound quality in every situation Robust system protection and thermal limiting keep your system safe Flexible mounting options allow tripod-mounting, pole-mounting, and stage monitor use Compact and lightweight for easy setup and transport Housed in a tough, road-ready enclosure Efficient Class D amplification System protection/limiting keeps your system safe 3-channel, digitally controllable mixer Powerful DSP for the best sound and performance Lightweight professional enclosure designed for heavy use Powered: Yes Power Configuration: Bi-amped LF Driver Size:12" woofer HF Driver Size:1.4" HF compression driver LF Driver Power Amp:1000W Class D HF Driver Power Amp:300W Class AB Total Power:1300W Peak Inputs:2 x XLR-1/4" combo Outputs:1 x XLR (mix out) Frequency Range:50Hz-23kHz (-10dB) Crossover Frequency:24 dB/octave @ 2kHz Maximum Peak SPL:126 dB SPL @ 1m Signal Processing:4 x voice modes Enclosure Material: Polypropylene with textured black finish Mounting Options: Pole Mount, Floor Power Source: Standard IEC AC cable Height:24.2" Width:14.1" Depth:14" Weight:29.1 lbs. Manufacturer Part Number:2048070-00 ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov