AudioControl (75)

Audiocontrol 3 Pin 3-pin power plug for Audio Control, Epicenter, Matrix Plus Overdrive Plus 3XS 2XS 6XS 24XS EQS DQL-8 EQP EQX EQL DQS DQX DQT DQXS Audiocontrol 3 Pin These 3-pin connectors are used on our car and home products. If you’ve lost your connector, or if you like to collect small, interesting objects, you’ve found the right page. Check your product to see which connector you need, either 3-pin, then add as many as you like to your cart. Postage is included when shipping within the Contiguous United States. 3 Pin, 3-pin power plug (Black) for Audio Control, Audiocontrol, Epicenter, Matrix Plus Overdrive Plus 3XS 2XS 6XS 24XS EQS DQL-8 EQP EQX EQL DQS DQX DQT DQXS Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

 Audio Control AC-BT1 All-Weather Bluetooth® Streamer to an RCA or AUX input   General Features: High Definition Low-Latency Audio Streaming aptXTM HD Support 24 bit / 48 kHz Audio Streaming from Devices with aptX Codec IPX5 rated enclosure Built in fuse Signal to Noise Ratio: 95 dB Current Draw: 35 mA Fuse Rating: 2 A Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control AC-LGD 60 Load generating device & signal stabilizer for OEM Premium Amplified General Features: Ideal for OEM non-amplified sound systems Designed to generate load and stabilize signal from amplified factory system to ensure the best possible audio Installed between the factory speaker outputs and line output converter or speaker level inputs on the amp or processor Each pair is pre-wired with EIA standard wire colors for both front and rear connections 60 Ohm Input Impedance 150W Maximum Input voltage ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control AC-LGD Load Generator and Signal Stabilizer General Features: Generates load and stabilizes signal for Class D amp systems Plug and play installation Plugs into line output converter, then to speakers Handles up to 100 watts or 20 volts ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control ACM-1.300 300W RMS ACM Series 2 ohm Stable Monoblock Class-D Amplifier General Features: AudioControl ACM Series ACM-1.300 Class-D 2 ohm Stable Monoblock Amplifier RMS Power Rating: Small footprint for flexible mounting options GTO Signal Sense turns on the amp when the signal is detected from the factory amp or stereo Patented AccuBASS processing restores bass Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on Mono channel operation Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Heavy duty aluminum alloy heat-sink Input sensitivity: Frequency Response: 10 - 22000Hz Total Harmonic Distortion (THD): <.01% Signal to Noise Ratio: 102 dB Linkwitz-Riley Crossover Fuse Rating: 30A x 1 8 gauge power and ground wiring is recommended for installation. ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control ACM-2.300 300W RMS ACM Series 2 ohm Stable 2-Channel Class-D Amplifier   General Features: AudioControl ACM Series ACM-2.300 Class-D 2 ohm Stable 2-Channel Amplifier RMS Power Rating: Small footprint for flexible mounting options GTO Signal Sense turns on the amp when the signal is detected from the factory amp or stereo Patented AccuBASS processing restores bass Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on Mono channel operation Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and short speaker protection) Heavy-duty aluminum alloy heat-sink Input sensitivity: Frequency Response: 10 - 22000Hz Total Harmonic Distortion (THD): <.01% Signal Noise Ratio: 102 dB Linkwitz-Riley Crossover Fuse Rating: 30A x 1 8 gauge power and ground wiring is recommended for installation. ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control ACR-1 Dash Mount Wired Remote Level Control For Select AudioControl Sound Processors General Features: Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control ACR-2 Remote Level/Bass Control For Select AudioControl Processors Add remote level control for your LCQ-1. This is the replacement remote for the Epicenter® Plus. Comes with a 20-foot cable and removable mounting enclosure (for custom dash installations). General Features: Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Dimensions: 1.75”W x 2.5”D x 1.0”H Weight: 2.3oz (65.2g) Compatible with: LCQ-1 The Epicenter® Plus Legacy products supported: LC7 DQL-8 What is in the ACR-2 package: ACR-2 owner's manual Remote dash mount control 20' RJ-14 cable ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control ACR-2 Remote Level/Bass Control For Select AudioControl Processors Add remote level control for your LCQ-1. This is the replacement remote for the Epicenter® Plus. Comes with a 20-foot cable and removable mounting enclosure (for custom dash installations). General Features: Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Dimensions: 1.75”W x 2.5”D x 1.0”H Weight: 2.3oz (65.2g) Compatible with: LCQ-1 The Epicenter® Plus legacy products supported: LC7 DQL-8 What is in the ACR-2 package: ACR-2 owner's manual Remote dash mount control 20' RJ-14 cable ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control ACX-300.1 ACX Series All-Weather 300W Monoblock Audio Marine Amplifier AudioControl’s ACX-300.1 all-weather monoblock amplifier delivers honest power levels to the sound system in your boat, ATV, UTV motorcycle, and more. The ACX-300.1 will ensure your open-air speakers and subwoofers provide plenty of punch and clarity all day. Installer-friendly, heavy gauge quick-connect wiring makes installation quick and painless, making the ACX-300.1 all-weather monoblock amplifier the perfect solution for your next adventure. General Features: Audio Control ACX Series ACX-300.1 4-Ohm Monoblock Amplifier RMS Power Rating: 4 ohms: 175 watts x 1 channel RMS Power Rating: 2 ohms: 300 watts x 1 channel Total power output: 600 watts CEA-2006 Compliant Amplifier AccuBASS® One channel operation Frequency Response: 26 - 22000 Hz Total Harmonic Distortion (THD): <0.01% Signal to Noise Ratio: 106 dB Variable low-pass filter: 80 - 120 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the ACX-300.1 package: ACX-300.1 owner's manual Mono amplifier 7" Power & ground harness 7" Speaker output harness ACR-1 Remote Level Control 2 Crimp-on terminals for power & ground harness Harness locking pin ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control ACX-300.4 4-channel Powersports Marine amplifier, 50 watts RMS x 4 AudioControl’s ACX-300.4 all-weather amplifier delivers honest power levels to the sound system in your boat, ATV, UTV, motorcycle, and more. The ACX-300.4 will ensure your open-air speakers provide plenty of punch and clarity all day long for a two- or four-channel system. Installer-friendly, heavy gauge quick-connect wiring makes installation quick and painless, making the ACX-300.4 all-weather amplifier the perfect solution for your next adventure. General Features: 4/3/2-channel Marine and All Weather Selectable low/hi input stage with independent gain controls. Features AudioControl’s patented AccuBASS® circuitry Low-pass/bypass 12dB/octave Linkwitz-Riley crossover 300 Watts @ 2 Ohms or 175 Watts @ 4 Ohm 4-channel Powersports/marine amplifier 50 watts RMS x 4 at 4 ohms 75 watts RMS x 4 at 2 ohms 150 watts RMS x 2 bridged at 4 ohms Class D amp technology a selectable high-pass filter (bypass, 80, 120 Hz at 12 dB/octave) on front and rear channels Authorized Internet Dealer Dimensions: 10-3/4"W x 2-7/16"H x 3-7/8"D 1-year Manufacturer's Warranty What is in the ACX-300.4 package: ACX-300.4 owner's manual 4-Channel amplifier 7" Power & ground harness Two 7" speaker output harnesses Power & ground harness 2 Crimp-on terminals Harness locking pin ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control AudioControl 4 pin plug LC8i EQL Epic160 LCQ-1 LC2i EQS These 4-pin connectors are used on our car and home products. If you’ve lost your connector or like to collect small, interesting objects, you’ve found the right page. Check your product to see which connector you need, either 4-pin, then add as many as you like to your cart. Postage is included when shipping within the Contiguous United States.4 Pin, 4-pin power plug (Black) for Audio Control, Audiocontrol, 4 Pin Plug LC8 EQL EQS EPIC160 LC2I LCQ1 THREE.1 FOUR.1 DQL8 Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.