Pro Full Range Speaker Drivers (38)

MR DJ TE-180 4"x10" 300 Watts Piezo Compression Horn Tweeters Driver for PA DJ Speakers MR DJ Piezo Horn Tweeter Excellent Transient Response, Low Distortion Replacement Tweeter. This is Great for PA DJ Cabinet, or If You are Building Your Own PA DJ Speakers. A Very Efficient and Powerful Compression Tweeter. General Features: 4"x10" Piezo Horn Tweeter Excellent Transient Response, Low Distortion 4-8 Ohms Impedance 50 Watts RMS 300 Watts MAX Extreme High-Frequency Response: 3.5-30khz Tweeters with Driver PA DJ Speakers – Replacement Perfect Replacement for Many Classic Loudspeakers No Crossover Required - Great for Simple, Economical Designs SPL: 92db Sensitivity: 108 dB Excellent Transient Response Low Distortion Great for Super Tweeter Applications in PA DJ Karaoke Systems Extreme High-Frequency Response: 3.5-30kHz

2 MR DJ TE-515 5" X 15" 300W Pro Audio PA/DJ Wide Screw-On Type Piezo Horn TweeterFinally, an affordable medium-sized midrange/tweeter compression horn with a decent driver that doesn't cost a fortune..., 5"x15" Piezo Horn Tweeter Excellent Transient Response, Low Distortion, Replacement tweeter, These are GREAT for DIY projects that are a bit better than entry-level components. Great for automotive. monitors and medium-size PA WORKS FOR JBL, Peavey, Cerwin Vega, EV, Electra Voice, Yamaha, Pyle-Pro, and MR DJGeneral Features: 5"X15" Compression Driver Horn Tweeter Impedance: 8 Ohm Frequency Range: 1.5k - 20khz RMS Power: 50 Watts Max Power: 100 Watts Peak Power: 300 Watts Sensitivity: 108 Db Titanium Diaphragm 1" Throat Ferrofluid Cooled 22 Ounce Magnet Extreme High-Frequency Response: 3.5-30khz Tweeters with Driver Pa/Dj Speakers – Replacement Home Cabinet Horn Replacement Material: ABS Resin Front of Lens to Back of Magnet Measurement: 8.81" Item Weight:1.95 Pounds Item Dimensions: 15x5x7 Inches ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Mr. Dj HDT700B 3.5-Inch Titanium Bullet High Compression Tweeter with 10 Ounce Ferrite Magnet (Black) for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT700B 3.5" heavy-duty titanium super tweeters. MR DJ 3.5-inch square high compression titanium bullet tweeter features flat sides that allow for close side by side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can handle high frequencies with ease and meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system. General Features: 3.5" Titanium Bullet Super Tweeter 1" High-Temperature Kapton Voice Coil 10 oz Ferrite Magnet Structure Peak Power Handling- 300W (Per Tweeter) RMS Power Handling: 50W (Per Tweeter) Black Cutting Finish Die-Cast Aluminum Frame Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

MR DJ USA TWR300 300 Watts 4" (3.85") Round Compressor Piezo Horn Tweeter The MR DJ TWS300 is a 4" Component Square Tweeter with a piezo horn element. It is a Replacement for a DJ Speaker, Loudspeaker, Buzzer, and Treble. These tweeters are designed for Car Audio, Home audio, and speaker Sound Boxes. This MR DJ 4-8ohm piezo horn tweeter has a max wattage of 300 watts and is designed and engineered in the USA. This tweeter has exactly matching specifications as Motorola's KSN1056A tweeter and is the perfect replacement. These are popular tweeters often used in pro, car, and home audio speaker applications. Because of its piezo design, it provides crisp highs and does not require a crossover. Also, it works great as an add-on to any existing audio system to make it sound cleaner and brighter. These are also replacements for home cabinets and work great in-car speaker boxes. General Features: TW Series Super Piezo Bullet Tweeter Super High-Frequency Tweeter Peak Power Handling: 300 watts RMS Power Handling: 150 watts 3.85" Inch DJ Bullet Tweeter Designed for flush and surface mounting 90 Degree sound dispersion Designed for use with a bi-polar electric capacitor 4-8 ohms impedance Durable textured ABS construction matches most interiors Always use a bi-polar capacitor Frequency Range: 5000-20,000 Hz Sensitivity: 108 dB Nominal Impedance: 8 ohms Sound Dispersion: 90° 1-year Manufacturer's warranty About Us About Us Online Pro Music strives to offer our customers with quality products in the car audio & pro audio at the lowest prices possible! We have many years of experience distributing brand name car audio products worldwide. Payment Payment We accept payment by: Paypal. Shipping Shipping We take great care packaging every item to ensure safe shipment to you. We charge a shipping fee only to cover our costs of materials and labor. Once your order has been processed and we have received cleared payment, your item will be dispatched as soon as possible. Terms Terms We warrantee and represent that the goods are as described in the above listing. We specifically disclaim any implied warranties of title, merchantability, fitness for a particular purpose and non-infringement. Customers should satisfy themselves that any item choice made is suitable for their intended purpose or use. We pride ourselves on our customer service. In the rare event that you have a problem with your item please contact us and we'll be happy to help. Returns Returns We allow a return for a refund within 30 days from date of purchase. All returns must include all original items , unused, undamaged, in re-sellable condition, with all original packaging including manuals, warranty forms, etc. Shipping and handling fees are not refundable. Buyer is responsible for shipping costs incurred for returning products back for refund or exchange. There will be a 20% restocking fees for all returns. The amount refunded will also have a deduction of shipping costs incurred by Seller when shipping items to Buyer, including items purchased with "FREE SHIPPING". No returns will be accepted without prior authorization.Please inspect your shipment upon arrival and report any shipping related damage to us immediately within 3 days. You may also be interested in..... View more great items Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca. Template by Froo Apps Froo Frooition www.froo.com | selling manager applications, eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design View more great items

MR DJ USA TE180 4"x10" 300 Watts Piezo Compression Horn Tweeters Driver for PA DJ Speakers MR DJ Piezo Horn Tweeter Excellent Transient Response, Low Distortion Replacement Tweeter. This is Great for a PA DJ Cabinet or Building Your PA DJ Speakers—a Very Efficient and Powerful Compression Tweeter. General Features: 4"x10" Piezo Horn Tweeter Excellent Transient Response, Low Distortion 4-8 Ohms Impedance 50 Watts RMS 300 Watts MAX Extreme High-Frequency Response: 3.5-30khz Tweeters with Driver PA DJ Speakers – Replacement Perfect Replacement for Many Classic Loudspeakers No Crossover Required - Great for Simple, Economical Designs SPL: 92db Sensitivity: 108 dB Excellent Transient Response Low Distortion Great for Super Tweeter Applications in PA DJ Karaoke Systems Extreme High-Frequency Response: 3.5-30kHz Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ USA HDT1000S 4-inch Chrome High Compression Titanium Bullet Super Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT1000S 4" heavy-duty titanium super tweeters. MR DJ 4-inch square high compression titanium bullet tweeter features flat sides allowing close side-by-side mounting. It has a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can easily handle high frequencies and are meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter can add brilliance and articulation to any professional loudspeaker system.General Features: 4" Titanium Bullet High Compression Tweeter 11 Oz Ferrite Magnet mounting depth of 2-1/2" High-Temperaturerature Kapton Voice Coil, Peak Power Handling- 500W (Per Tweeter) @ 8-Ohm RMS Power Handling: 100W (Per Tweeter) @ 8-Ohm Peak Power Handling- 1000W (Per Tweeter) @ 4-Ohm RMS Power Handling: 200W (Per Tweeter) @ 4-Ohm Impedance 4/8 OHMS, Crossover Capacitor Included 1.75" High-Temperature Kapton Voice Coil Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ USA HDT1000B 4-inch Black High Compression Titanium Bullet Super Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT1000B 4" heavy-duty titanium super tweeters. MR DJ 4-inch square high compression titanium bullet tweeter features flat sides allowing close side-by-side mounting. It has a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can easily handle high frequencies and are meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter can add brilliance and articulation to any professional loudspeaker system.General Features: 4" Titanium Bullet High Compression Tweeter 11 Oz Ferrite Magnet mounting depth of 2-1/2" High-Temperaturerature Kapton Voice Coil, Peak Power Handling- 500W (Per Tweeter) @ 8-Ohm RMS Power Handling: 100W (Per Tweeter) @ 8-Ohm Peak Power Handling- 1000W (Per Tweeter) @ 4-Ohm RMS Power Handling: 200W (Per Tweeter) @ 4-Ohm Impedance 4/8 OHMS, Crossover Capacitor Included 1.75" High-Temperature Kapton Voice Coil Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ USA HDT700B 3.5-inch 500W Black High Compression Titanium Bullet Super Tweeter with 10 Ounce Ferrite Magnet for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT700B 3.5" heavy-duty titanium super tweeters. MR DJ 3.5-inch square high compression titanium bullet tweeter features flat sides, allowing close side-by-side mounting. It has a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can easily handle high frequencies and are meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter can add brilliance and articulation to any professional loudspeaker system. General Features: 3.5" Titanium Bullet Super Tweeter 1" High-Temperature Kapton Voice Coil 10 oz Ferrite Magnet Structure Peak Power Handling- 300W (Per Tweeter) RMS Power Handling: 50W (Per Tweeter) Black Cutting Finish Die-Cast Aluminum Frame Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ USA HDT700S 3.5-inch 500W Black High Compression Titanium Bullet Super Tweeter with 10 Ounce Ferrite Magnet for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT700S 3.5" heavy-duty titanium super tweeters. MR DJ 3.5-inch square high compression titanium bullet tweeter features flat sides, allowing close side-by-side mounting. It has a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can easily handle high frequencies and are meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter can add brilliance and articulation to any professional loudspeaker system. General Features: 3.5" Titanium Bullet Super Tweeter 1" High-Temperature Kapton Voice Coil 10 oz Ferrite Magnet Structure Peak Power Handling- 300W (Per Tweeter) RMS Power Handling: 50W (Per Tweeter) Black Cutting Finish Die-Cast Aluminum Frame Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Yorkville Sound C15W, Coliseum Series 500W 2-Way Installation Speaker 15 Inch - White Coliseum 15" Installation Loudspeakers Coliseum loudspeakers are designed for installation in home, retail, restaurant, office, school, and house of worship spaces. Whether you need discrete in-ceiling speakers, a horn for outdoor paging, or a flown array of powered cabinets, Coliseum combines high-fidelity audio with clean, minimalist aesthetics that blend naturally into any environment. The C15W is the most powerful loudspeaker in the Coliseum series. With 500 watts of power handling, a 15” woofer, rotatable horn, and OmniMount-compatible rigging points, the C15W is ideal for large commercial or worship applications. The optional FH2W hardware kit offers even more mounting flexibility for the C15W and C12W. It allows single-point hangs for solo cabinets or two-box arrays, with a staggered hole pattern for multiple tilt angles. If additional tilt-down is required, simply attach an eyebolt in the pullback position of the cabinet in addition to the hang point. When mounting two loudspeakers, the FH2W splays them at optimum angles to minimize interference   Product Specification:   System Type: Two Way Active or Passive: Passive Power Rating (Watts): 500 Biampable: No Nominal Impedance (Ohms): 8 Sensitivity (dB @1Watt/1m): 99 Max SPL (dB): 126 Frequency Response (Hz +/- 3dB): 50 - 20k Crossover Frequency (Hz): 1100 Driver Configuration: 15 inch / 1 inch HF Driver(s): 1 inch HF Horn: Rotatable ABS Waveguide HF Dispersion (°H x °V): 0 x 50 Rotatable HF Protection: CTL Inputs - Speakon 4-pin: 2 Inputs - Screw Terminal: 1 Pair Flying Hardware: 1/4 inch Optional Flying Hardware: FH2W Flyware is available Pole Mount Adapter (1 3/8"-3.5cm): No Enclosure Materials: 15mm (5/8inch) 11-ply Russian birch Grille: Perforated Metal Covering / Finish: Two Part White Epoxy Other Details: Has rear mounted rigging points for Omnimount 120.0WA bracket Dimensions (DWH xbackW, inches): 15.4 x 20.9 x 28.7 x 15.7 Dimensions (DWH xbackW, cm): 39.1 x 53.1 x 72.9 x 39.8 Weight (lbs/kg): 75 / 34.2 Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Yorkville Sound NX55P-2 12-Inch 2-Way Powered Loudspeaker (12 Inch) NX 12” Powered Loudspeaker NX loudspeakers have earned a reputation for proven reliability for over twenty years. The traditional analog design works equally well as a front-of-house speaker or stage monitor. Featuring a 12” woofer and 2000 watts of peak power (1000 watts program), the NX55P-2 is the most powerful speaker in the NX series. The rear panel features a master level control, a selectable LF roll off for use with a subwoofer or as a vocal monitor, and a switchable onboard mixer section. When enabled, this provides an XLR microphone input and 1/4" line inputs with level controls and 2-band EQ. Link inputs and outputs provide balanced connectivity to other cabinets. Up to three onboard mixers can be active in a linked system, providing up to three mic and six line inputs without requiring an external mixer. The NX55P-2's inputs and controls are well-protected so that it can be used in any orientation. It was carefully designed for low operating temperatures and reduced heat production to be placed close to walls, floors, and other speakers. General Features: 2000 W Peak Power (1000 W Program) 12” LF Driver with 3” Voice Coil 1.4” HF Driver 1x XLR Mic Input, 2x 1/4" Line Inputs, 1x XLR and 1x 1/4” Link Inputs 1x XLR and 1x 1/4" Link Outputs Integrated Mixer with 2-Band EQ Switchable LF Rolloff for Use with Subwoofers Integrated Flying Hardware Made in Canada System Type: Powered Loudspeaker Power Rating: 2000 W Peak (1000 W Program) Biampable: Self-Powered Biamp Operation Only: Yes Sensitivity (dB AT 1Watt/1m): 100 dB Max SPL: 134 dB Peak (128 dB Continuous) Frequency Response (Hz +/- 3dB): 45 Hz - 18 kHz Crossover Frequency: 2 kHz HF Driver(s): 1.4” Aluminum Diaphragm, 1” Exit HF Dispersion (°H x °V): 80° x 50° HF Protection: Thermal / Peak Limiter LF Driver(s): 12” with 3” Voice Coil LF Protection: Thermal / Overcurrent HF Amplifier Type: 2-Tier Class H LF Amplifier Type: Class D Power Consumption (typ/max): 120 / 310 VA Inputs: 1x XLR (Mic) 2x 1/4" (Line / CD) 1x XLR 1x 1/4" Link Inputs Input Sensitivity (Vrms Sine): 1.23 Vrms Sine, +4dBv Controls: Master Level, LF Rolloff (60 Hz / 100 Hz) Mixer On / Off Mic Level Line / CD Level Treble Bass Mixer Controls: Line Level Mic Level Bass Treble Limiter: Yes LED Indicators: Power, Clip, Limit Bar Handles: 1 (Side) Flypoints : 4 (2x Top, 2x Bottom), 1x Pullback Flying Hardware: 1/4-20 Optional Flying Hardware: NXF Flyware Pole Mount Adapter (1 3/8  1 (Bottom) Enclosure Materials: Molded Polypropylene Dimensions (DWH) : 12.25" x 16" x 26.5" (31.1 cm x 40.6 cm x 67.3 cm) Weight: 41 lbs / 18.6 kg  Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

MR DJ PRO-D1 High Compression Titanium Driver Bullet Super Tweeter with Aluminum Horn MR DJ PRO-D1 Pro Audio Compression Driver for mid-high vocal reproduction offers high sensitivity and a pleasant sound from the titanium diaphragm. The small diameter of the driver allows front mounting, making it easy to install without detaching the driver from the horn. MR DJ PRO Titanium Compression Drivers with Aluminum Horns are the top-of-the-line high-frequency drivers/tweeter/horns in the market. Capable of emitting deafening high-frequency sound, this high-compression driver will turn heads and demand attention. It is guaranteed to elevate any pro audio build to the next level. General Features: Pro Audio Compression Driver for mid-high vocal reproduction that offers high sensitivity and a pleasant sound from the titanium diaphragm. The small diameter of the driver allows front mounting, making it easy to install, without detaching the driver from the horn. Impressive 110 dB sensitivity with PRO Audio long Horn Designed for maximum sound reproduction Peak Power Handling 1000 Watts Program Power Handling 600 Watts AES Rated Power 400 Watts Diaphragm Titanium Material, Horn Titanium Material, Mr. Dj PRO-D1 1000 Watts Titanium Compression Driver RMS Power 600 Watts, Voice Coil 2.03", Impedance 8 Ohm, Diaphragm Titanium Material, Horn Titanium Material, Throat Diameter 2", 35 Oz Magnet, Frequency Response 900Hz - 17.2KHz, Newly redesigned backplate for an amazing look. The high-wattage driver requires 220w AES power and 600w max for ear-blasting high-range frequencies. 900Hz-17.2KHz Frequency Response Mylar Capacitor Crossover 2 inch Driver Horn 108dB Sensitivity 8-Ohms Impedance Baffle Cut Out: 5.39" Overall Diameter: 6.18" Mounting Depth: 7.67" Weight: 6 Lbs. Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.