Pro Signal Processors & Recorders (49)

Peavey PV10BT Pro Audio Mixer,4 mic In,Bluetooth/USB,Compressor/Effects Bundle with Peavey PV 20' XLR Female to Male Low Z Mic Cable Introducing the next level in world-class non-powered mixer performance. The all new PV series mixing consoles include Peavey's reference-quality mic preamps that spec in at an incredible 0.0007% THD, making the PV series mixers excellent for live or recording applications. The PV 10 BT includes 4 channels of reference quality mic preamps, 4 direct outputs for recording, a stereo channel, media channel with Bluetooth wireless input, high quality digital effects with LCD display, streaming USB out, MP3 playback via USB A input, Peavey's exclusive Kosmos audio enhancement, 48-volt phantom power, dual selectable control room outputs, 2 channels of compression, one channel of on board selectable guitar preamp, 3-band EQ per channel with bypass, channel mute buttons, aux send, signal clip indicators, and a stereo master LED meter bridge. This amazingly versatile mixer is at home both in the studio as well as live applications. Modern features such as Bluetooth allow seamless connection to almost any "smart" device. 4 direct outs allow easy connection to most DAW interfaces for recording. In addition, the PV 10 BT can stream audio directly to a PC. MP3 playback is also available, just plug a flash drive with MP3 files on it into the USB A port and use the LCD to select and play back music. The PV series Solo feature allows the user to listen to individual channels via headphone or control room outputs, and the EQ bypass allows the user to hear and compare the EQ'd signal to the original signal with the push of a button. 2 channels of compression keep signals with difficult levels under control, and Peavey's exclusive guitar shape adjusts the EQ and preamp specifically for guitar. Hi pass filters on every channel remove unwanted rumble and noise, and balanced AUX and Master outputs ensure a clean noise-free signal to your powered speakers or power amplifier. Features of PV 10BT: ​Peavey PV10BT Pro Audio Mixer,4 mic In,Bluetooth/USB,Compressor/Effects, 4 combination XLR/1/4" low noise mic preamps, Rugged console design, EQ bypass per channel, 2 channels of built-in compression, Individual channel mutes, LED clip and signal present indication, On-board USB-A MP3 playback, 4 channels of Peavey's exclusive MidMorph, 4 Channels of direct out, 3-band EQ on all channels, KOSMOS bass and treble enhancement, Channel 9/10 stereo return/input, Dual selectable control room outputs, Individual Listen/Solo function, Precision 60 mm faders on master, Stereo USB-B streaming audio in and out, One pre-fader AUX send, High quality master LED meter bridge, On-board studio quality digital effects with individual channel control Effects and playback LCD display, Master mic mute, Stereo pan control per channel, Studio quality headphone output, Stereo 1/4", RCA or 3.5mm input channel, Peavey's exclusive on-board Hi Z guitar input, Main stereo outputs with 1/4" unbalanced and balanced XLR connectors Features of PV 20 FOOT LOW Z MIC CABLE: Peavey PV 20' XLR Female to Male Low Z Mic Cable - 100 % Copper/Top Quality, High-quality XLR connectors with nickel contacts, High density shield for maximum flexibility and noise prevention, 24 awg. twisted pair, shielded cable, 20 foot length, Weight Unpacked: 0.75 lb(0.34 kg), Weight Packed: 0.75 lb(0.34 kg), Width Packed: 3"(7.62 cm), Height Packed: 13"(33.02 cm), Depth Packed: 0.75"(1.905 cm) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Audio Control DM-RTA 5 in 1 Signal Analyzer and Multi-Test Tool   General Features: Test and Measure Any Signal Balanced Line Level Inputs and Outputs Unbalanced Line Level Inputs and Outputs Speaker Level Inputs (handles up to 400 watts) Microphone Input with 48V Phantom Power (microphone sold separately) Microphone presets (for CM-10, CM-20 & C550H) Digital and USB Outputs Connect to PC/Mac, Phone or Tablet Option Port for Bluetooth Connectivity Battery Powered and Compact for Portability DM-RTA app available in downloads for Mac/PC or iPhone/Android Battery Life: ~5 Hours Dimensions: 8” W x 4.8” D x 2.4” H Weight: 2.6lbs (1.2kg) ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ DEQ500 19" Rack Mount Pro Dual 10 Band Stereo Graphic Equalizer EQ with VU Meters & MR DJ MIC200 Karaoke Microphone, Dynamic Vocal Microphone for Speaker, Wired Handheld Mic with On and Off Switch and 10 Feet Cable MR DJ DEQ500 19" Rack Mount Pro Dual 10 Band Stereo Graphic Equalizer EQ MR DJ DEQ500 19" Rack Mount features ten independently adjustable frequency bands, and MR DJ EQ500 gives you super-precise sonic control with your home stereo system. Far more sophisticated and powerful than your receiver's bass and treble controls, this graphic equalizer lets you fine-tune audio signals to suit your musical taste and also features a dual Vu meters level monitor analyzer display. It doesn't just look cool — seeing the music's frequency content can also help you make suitable sound adjustments. General Features: Dual Vu Meters Level Monitor Dual 10 Bands EQ with Blue LEDs 20 Band Graphic Equalizer Multi Color LED Display Blue LED on each Equalizer Slide Control Ten bands of equalization (per channel), with a range of ±12 dB center frequencies: 30 Hz, 60 Hz, 120 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, and 16 kHz 2 Stereo RCA line Input 2 Stereo RCA Line Output 2 Stereo RCA Line Output for Record VFD Vacuum Fluorescent Display Bass/Midrange/High EQ Controls Separate Left/Right Channel Volume Gain Control Removable Rack Mount Brackets Bass/Midrange/High gain control Left/Right Channel Volume gain control Signal to Noise Ratio 95 dB Frequency Response: 20-20,000 Hz THD 0.03% Input Power: AC ~ 110V 60H/220V 50Hz 110/220V Switchable Front Panel Power Switch 17"(19" w/brackets)W x 3-1/2"H x 11-7/8"D Weight: 5 lbs 1 Year Manufactures Warranty What is in the DEQ500 package: DEQ500 Owner's Manual One 10-band EQ Warranty/Registration Sheet MR DJ MIC200 Karaoke, Dynamic Vocal Wired Microphone This MR DJ handheld dynamic microphone offers a cardioid pickup pattern, capturing your output and filtering out dozens of unwanted sounds. It is perfect for anyone who wants to record or perform live, indoors or outdoors. No battery is required for operation; you can set it up in minutes. An external on/off switch on it for easy control (Push up is ON, push down is OFF). General Features; Durability Handheld Dynamic Karaoke Microphone Broadcast Quality Wired Cardioid Dynamic Vocal Microphone Handheld Dynamic Microphone is Ideal for Broadcast and Solo Singing Vocals, Drums, Amplifier, Portable Speaker, Audio Mixer, Karaoke Machine, and Amplified Guitars Excellent frequency response Wired Handheld Mic Handy On and Off Switch Microphone with 1/4" 6.5mm TS Connector Plug 10 Feet Cable What is in the MIC200 package: MIC200 Owner's Manual One MIC200 Microphone Warranty/Registration Sheet ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ DEQ500 19" Rack Mount Pro Dual 10 Band Stereo Graphic Equalizer EQ with VU Meters MR DJ DEQ500 19" Rack Mount features ten independently adjustable frequency bands, and MR DJ EQ500 gives you super-precise sonic control with your home stereo system. Far more sophisticated and powerful than your receiver's bass and treble controls, this graphic equalizer lets you fine-tune audio signals to suit your musical taste and also features a dual Vu meters level monitor analyzer display. It doesn't just look cool — seeing the music's frequency content can also help you make suitable sound adjustments. General Features: Dual Vu Meters Level Monitor Dual 10 Bands EQ with Blue LEDs 20 Band Graphic Equalizer Multi Color LED Display Blue LED on each Equalizer Slide Control Ten bands of equalization (per channel), with a range of ±12 dB center frequencies: 30 Hz, 60 Hz, 120 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, and 16 kHz 2 Stereo RCA line Input 2 Stereo RCA Line Output 2 Stereo RCA Line Output for Record VFD Vacuum Fluorescent Display Bass/Midrange/High EQ Controls Separate Left/Right Channel Volume Gain Control Removable Rack Mount Brackets Bass/Midrange/High gain control Left/Right Channel Volume gain control Signal to Noise Ratio 95 dB Frequency Response: 20-20,000 Hz THD 0.03% Input Power: AC ~ 110V 60H/220V 50Hz 110/220V Switchable Front Panel Power Switch 17"(19" w/brackets)W x 3-1/2"H x 11-7/8"D Weight: 5 lbs 1 Year Manufactures Warranty What is in the DEQ500 package: DEQ500 Owner's Manual One 10-band EQ Warranty/Registration Sheet ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ DXO200 PRO PA DJ Club Stereo 2 Way Plus Subwoofer Crossover with XLR Input & Output MR DJ DXO200 is the perfect addition to any sound reinforcement system. Designed for live sound and fixed-install applications. The DXO200 is an audio crossover. Audio crossovers are a class of electronic filters used in audio applications. Most individual loudspeaker drivers cannot cover the entire audio spectrum from low frequencies (think subwoofers) to high frequencies (think tweeters) with sufficient relative volume and lack of distortion. The inputs and outputs are both balanced XLR and 1/4" jacks. Connect your sound source to the XO2 input and output to your amplifiers to power your speakers. The controls will allow you to split your bands and send the low frequencies to your subwoofer speakers, mid-range frequencies to the horn drivers and mid-range speaker boxes, and the high frequencies to your tweeters. Properly channeling the correct frequency to the right speakers is the proper way of designing sound and speaker fields. General Features: Professional 2-Way Stereo Crossover + Subwoofer Unbalanced XLR 1/4" input jacks Balanced XLR outputs Switchable from 110V-220V Input Impedance: 100k Ohms Output Impedance: 220 Ohms Frequency Response: 20-25,000 Hz Signal-to-Noise Ratio: 80dB Crossover Range: Subwoofer: 50-250 Hz Low/High: 250-6000 Hz Weight: 4.4 lbs Dimensions: 5-3/4"D x 19"W x 1-3/4"H Authorized Internet Dealer 1-year Manufacturer's warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ DXO200 PRO PA DJ Club Stereo 2 Way Plus Subwoofer Crossover with XLR Input & Output MR DJ DXO200 is the perfect addition to any sound reinforcement system. Designed for live sound and fixed-install applications. The DXO200 is an audio crossover. Audio crossovers are a class of electronic filters used in audio applications. Most individual loudspeaker drivers cannot cover the entire audio spectrum from low frequencies (think subwoofers) to high frequencies (think tweeters) with sufficient relative volume and lack of distortion. The inputs and outputs are both balanced XLR and 1/4" jacks. Connect your sound source to the XO2 input and output to your amplifiers to power your speakers. The controls will allow you to split your bands and send the low frequencies to your subwoofer speakers, mid-range frequencies to the horn drivers and mid-range speaker boxes, and the high frequencies to your tweeters. Properly channeling the correct frequency to the right speakers is the proper way of designing sound and speaker fields. General Features: Professional 2-Way Stereo Crossover + Subwoofer Unbalanced XLR 1/4" input jacks Balanced XLR outputs Switchable from 110V-220V Input Impedance: 100k Ohms Output Impedance: 220 Ohms Frequency Response: 20-25,000 Hz Signal-to-Noise Ratio: 80dB Crossover Range: Subwoofer: 50-250 Hz Low/High: 250-6000 Hz Weight: 4.4 lbs Dimensions: 5-3/4"D x 19"W x 1-3/4"H Authorized Internet Dealer 1-year Manufacturer's warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control LC-5.1300 5-channel car amplifier — 100 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 2 ohms Two keys to unlocking great sound in a car stereo system are serious power and extensive control — and this amp's got them both. For power, AudioControl's LC-5.1300 five-channel amplifier puts out 100 watts RMS to four channels and up to 500 watts RMS to a sub. If you're into mega-power, competition-type systems, you could bridge this amp to 3-channel mode and drive a couple of high-performance components with 400 watts RMS each while powering a sub with 500 watts RMS — that's 1300 watts in total. General Features: 5-channel car amplifier 100 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms 200 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms 400 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms Class D amp technology MILC™ (Maximum Input Level Control) LED optimization and clip indicators stereo/mono switch on channel pairs ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control LC-5.1300 5-channel car amplifier — 100 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 2 ohms Two keys to unlocking great sound in a car stereo system are serious power and extensive control — and this amp's got them both. For power, AudioControl's LC-5.1300 five-channel amplifier puts out 100 watts RMS to four channels and up to 500 watts RMS to a sub. If you're into mega-power, competition-type systems, you could bridge this amp to 3-channel mode and drive a couple of high-performance components with 400 watts RMS each while powering a sub with 500 watts RMS — that's 1300 watts in total. General Features: 5-channel car amplifier 100 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms 200 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms 400 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms Class D amp technology MILC™ (Maximum Input Level Control) LED optimization and clip indicators stereo/mono switch on channel pairs ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ DXO300 PRO PA DJ Club Stereo 2/3 Way Plus Subwoofer Crossover with XLR Input & Output MR DJ DXO300 is the perfect addition to any sound reinforcement system. Designed for live sound and fixed-install applications. The DXO300 is an audio crossover. Audio crossovers are a class of electronic filters used in audio applications. Most individual loudspeaker drivers cannot cover the entire audio spectrum from low frequencies (think subwoofers) to high frequencies (think tweeters) with sufficient relative volume and lack of distortion. The inputs and outputs are both balanced XLR and 1/4" jacks. Connect your sound source to the XO3 input and output to your amplifiers to power your speakers. The controls will allow you to split your bands and send the low frequencies to your subwoofer speakers, mid-range frequencies to the horn drivers and mid-range speaker boxes, and the high frequencies to your tweeters. Properly channeling the correct frequency to the right speakers is the proper way of designing sound and speaker fields. General Features: Professional 3-Way Stereo Crossover + Subwoofer 2-way Stereo / 3-way Mono rack mountable crossover Subwoofer Output Unbalanced XLR 1/4" input jacks Balanced XLR outputs Switchable from 110V-220V Input Impedance: 100k Ohms Output Impedance: 220 Ohms Frequency Response: 25-25,000 Hz Signal-to-Noise Ratio: 80dB Crossover Range: Subwoofer: 50-250 Hz Low/High: 70-1000 Hz Mid/High: 480-7000 Hz Weight: 4.4 lbs Dimensions: 5-3/4"D x 19"W x 1-3/4"H Authorized Internet Dealer 1-year Manufacturer's warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control LC-1.800 Monoblock 800W RMS Amplifier with Accubass Two keys to unlocking great sound in a car stereo system are serious power and extensive control — and this amp's got them both. For power, AudioControl's LC-1.800 mono subwoofer amp puts out up to 800 watts RMS, so it'll make your subwoofers happy. The adjustable low-pass and fixed subsonic filters ensure your sub gets only the frequencies it was designed to play, while AudioControl's AccuBASS® circuit provides that your bass sounds excellent. General Features: mono subwoofer amplifier 500 watts RMS x 1 at 4 ohms (800 watts RMS x 1 at 2 ohms) Class D amp technology AccuBASS® circuitry for improved bass response MILC™ (Maximum Input Level Control) LED optimization and clip indicators ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control LC-4.800 4-channel car amplifier — 125 watts RMS x 4 The key to building a great car stereo system is power with control. AudioControl's LC-4.800 4-channel amplifier generates 125 watts RMS per channel, so it'll drive even the most demanding aftermarket speakers with plenty of headroom to spare. And it'll rumble the low end, too — bridge this versatile amp's output and you've got 400 watts per channel on tap to get your subs bumping. General Features: 4-channel car amplifier 125 watts RMS x 4 at 4 ohms (200 watts RMS x 4 at 2 ohms) 400 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode) variable Linkwitz-Riley high- and low-pass filters (30-300 Hz, 12 dB/octave) AccuBASS® circuitry for improved bass response MILC™ (Maximum Input Level Control) LED optimization and clip indicators GTO™ (Great Turn On) signal-sensing turn-on ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control LC-6.1200 6-channel car amplifier — 125 watts RMS x 6 Two keys to unlocking great sound in a car stereo system are serious power and extensive control — and this amp's got them both. For power, AudioControl's LC-6.1200 6-channel amplifier puts out 125 watts RMS per channel, so it'll drive even the most demanding aftermarket speakers with plenty of headroom to spare. And if you're into bass, you could bridge this amp to 3-channel mode to drive three subwoofers with 400 watts RMS each, 1200 watts in total. General Features: 6-channel car amplifier 125 watts RMS x 6 at 4 ohms (200 watts RMS x 6 at 2 ohms) 400 watts RMS x 3 bridged at 4 ohms (4-ohm stable in bridged mode) Class D amp technology AccuBASS® circuitry for improved bass response MILC™ (Maximum Input Level Control) LED optimization and clip indicators stereo/mono switch on channel pairs ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control D-4.800 D Series 4-channel car amplifier with digital signal processing — 125 watts x 4 Two keys to unlocking great sound in a car stereo system are serious power and extensive control — and this amp's got them both. For power, AudioControl's D-4.800 4-channel amplifier generates 125 watts RMS per channel, so it'll drive even the most demanding aftermarket speakers with plenty of headroom to spare. You could also bridge the D-4.800 to drive a couple subwoofers with 400 watts RMS each. General Features: 4-channel car amplifier with digital signal processing 125 watts RMS x 4 at 4 ohms (200 watts RMS x 4 at 2 ohms) 400 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode) all controls and adjustments made with the AudioControl Smart-User DSP app on your laptop (PC or Mac) via USB connection optional AC-BT25 Bluetooth adapter available variable high- and low-pass filters (20-20,000 Hz at 12 or 24 dB/octave) AccuBASS circuitry for improved bass response 30-band graphic EQ, parametric filters, phase correction time delay/alignment for inputs and outputs RTA (real-time analyzers) for inputs and outputs ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ DXO300 Stereo 2/3 Way Plus Subwoofer Crossover PA DJ Sound System with XLR Input & Output MR DJ DXO300 is the perfect addition to any sound reinforcement system. Designed for live sound and fixed-install applications. The DXO300 is an audio crossover. Audio crossovers are a class of electronic filters used in audio applications. Most individual loudspeaker drivers cannot cover the entire audio spectrum from low frequencies (think subwoofers) to high frequencies (think tweeters) with sufficient relative volume and lack of distortion. The inputs and outputs are both balanced XLR and 1/4" jacks. Connect your sound source to the XO3 input and output to your amplifiers to power your speakers. The controls will allow you to split your bands and send the low frequencies to your subwoofer speakers, mid-range frequencies to the horn drivers and mid-range speaker boxes, and the high frequencies to your tweeters. Properly channeling the correct frequency to the right speakers is the proper way of designing sound and speaker fields. General Features: Professional 3-Way Stereo Crossover + Subwoofer 2-way Stereo / 3-way Mono rack mountable crossover Subwoofer Output Unbalanced XLR 1/4" input jacks Balanced XLR outputs Switchable from 110V-220V Input Impedance: 100k Ohms Output Impedance: 220 Ohms Frequency Response: 25-25,000 Hz Signal-to-Noise Ratio: 80dB Crossover Range: Subwoofer: 50-250 Hz Low/High: 70-1000 Hz Mid/High: 480-7000 Hz Weight: 4.4 lbs Dimensions: 5-3/4"D x 19"W x 1-3/4"H Authorized Internet Dealer 1-year Manufacturer's warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Audio Control D-6.1200 D Series 6-channel car amplifier with digital signal processing — 125 watts RMS x 6 Two keys to unlocking great sound in a car stereo system are serious power and extensive control — and this amp's got them both. For power, AudioControl's D-6.1200 6-channel amplifier generates 125 watts RMS per channel — 200 watts per channel at 2 ohms — so it'll drive even the most demanding aftermarket speakers with plenty of headroom to spare. General Features: 6-channel car amplifier with digital signal processing 125 watts RMS x 6 at 4 ohms (200 watts RMS x 6 at 2 ohms) 400 watts RMS x 3 bridged at 4 ohms (4-ohm stable in bridged mode) all controls and adjustments made with the AudioControl Smart-User DSP app on your laptop (PC or Mac) via USB connection optional AC-BT24 Bluetooth adapter available variable high- and low-pass filters (20-20,000 Hz, 12 or 24 dB/octave) subsonic filter at 32 Hz AccuBASS circuitry for improved bass response 30-band graphic EQ, parametric filters, phase correction time delay/alignment for inputs and outputs RTA (real-time analyzers) for inputs and outputs ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.