PRO Tweeters, Drivers & Horns (196)

2 MR DJ TE-515 5" X 15" 300W Pro Audio PA/DJ Wide Screw-On Type Piezo Horn TweeterFinally, an affordable medium-sized midrange/tweeter compression horn with a decent driver that doesn't cost a fortune..., 5"x15" Piezo Horn Tweeter Excellent Transient Response, Low Distortion, Replacement tweeter, These are GREAT for DIY projects that are a bit better than entry-level components. Great for automotive. monitors and medium-size PA WORKS FOR JBL, Peavey, Cerwin Vega, EV, Electra Voice, Yamaha, Pyle-Pro, and MR DJGeneral Features: 5"X15" Compression Driver Horn Tweeter Impedance: 8 Ohm Frequency Range: 1.5k - 20khz RMS Power: 50 Watts Max Power: 100 Watts Peak Power: 300 Watts Sensitivity: 108 Db Titanium Diaphragm 1" Throat Ferrofluid Cooled 22 Ounce Magnet Extreme High-Frequency Response: 3.5-30khz Tweeters with Driver Pa/Dj Speakers – Replacement Home Cabinet Horn Replacement Material: ABS Resin Front of Lens to Back of Magnet Measurement: 8.81" Item Weight:1.95 Pounds Item Dimensions: 15x5x7 Inches ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Peavey RX22N High-Frequency Compression Horn Driver RX22HF RX22This is a direct replacement from Peavey themselves. Let us know if you want more pictures or information about this item. We deal directly with peavey, so let us know if you need more parts for your Peavey equipment. We carry Crossovers, full speakers, and all accessories!General Features: 2" edge wound voice coil with ferrofluid cooling improves power handling Screw on 1-3/8" 18 TPI mount is compatible with most popular horns Throat Parameter: .875" / 22 mm Nominal Impedance: 8 Ohms Minimum Impedance: 5.1 Ohms DC Resistance: 4.7 Ohms Power Capacity 1000 Hz to 20,000 Hz: 280 W peak 140 W program 70 W continuous using pink noise band-limited from 1000 Hz to 20 kHz(AES 2-1984) Power Capacity 500 Hz to 20,000 Hz: 240 W peak 120 W program 60 W continuous using pink noise band-limited from 500 Hz to 20 kHz Sensitivity: 111 dB / 1 Watt at 1 meter On-axis on 90º H x 45º V horn Nominal Efficiency: 30% Frequency Response: 500 Hz to 20,000 Hz Recommended Crossover: 1200 Hz at 12 dB / Octave Lowest Recommended Crossover: 500 Hz at 12 dB / Octave Diaphragm: Commercially pure titanium Voice Coil Diameter: 2.0" / 50.8 mm Voice Coil Material: Edge-wound copper-clad aluminum ribbon with a high temp composite bobbin Flux Density: 17,500 gausses (1.75T) Dimensions: 5.250" (133.3 mm) diameter x 3.05" (77.4 mm) depth Horn Coupling Diameter: 7/8: (22.2 mm) Horn Coupling Threads: Standard 1 3/8" / 18" Net Weight: 5 lbs. 6 oz. Shipping Weight: 6 lbs. 5.5 oz. Voice Coil Cooling: Ferrofluid Weight Unpacked: 5.50 lb(2.493 kg) Weight Packed: 6.48 lb(2.938 kg) Width Packed: 8.25"(20.955 cm) Height Packed: 8.25"(20.955 cm) Depth Packed: 4.75"(12.065 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ TE-180 4"x10" 300 Watts Piezo Compression Horn Tweeters Driver for PA DJ Speakers MR DJ Piezo Horn Tweeter Excellent Transient Response, Low Distortion Replacement Tweeter. This is Great for PA DJ Cabinet, or If You are Building Your Own PA DJ Speakers. A Very Efficient and Powerful Compression Tweeter. General Features: 4"x10" Piezo Horn Tweeter Excellent Transient Response, Low Distortion 4-8 Ohms Impedance 50 Watts RMS 300 Watts MAX Extreme High-Frequency Response: 3.5-30khz Tweeters with Driver PA DJ Speakers – Replacement Perfect Replacement for Many Classic Loudspeakers No Crossover Required - Great for Simple, Economical Designs SPL: 92db Sensitivity: 108 dB Excellent Transient Response Low Distortion Great for Super Tweeter Applications in PA DJ Karaoke Systems Extreme High-Frequency Response: 3.5-30kHz

XP Audio XBT200 1-Inch Titanium Horn Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition XP Audio XBT200 1" heavy-duty titanium super tweeters. XP Audio XBT200 1-inch high compression titanium bullet tweeter features flat sides that allow for close side by side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. XP Audio Professional grade super tweeters that can handle high frequencies with ease and meticulously designed tweeters to sound as good as they look. XP Audio Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. Absolute USA Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system.General Features: 1" / 25mm Titanium Bullet High Compression Tweeter 11 Oz Ferrite Magnet mounting depth of 2-1/2" High-Temperaturerature Kapton Voice Coil, Peak Power Handling- 200W (Per Tweeter) @ 4-Ohm RMS Power Handling: 50W (Per Tweeter) @ 4-Ohm Impedance 8 OHMS, Crossover Capacitor Included 1.75" High-Temperature Kapton Voice Coil Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Measurements: Overall depth 2.71 inches (69 mm) Mounting depth 1.74 inches (44 mm) Overall width 2.28 inches (58 mm) Cutout diameter 3.6 inches (92 mm) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Mr. Dj HDT700B 3.5-Inch Titanium Bullet High Compression Tweeter with 10 Ounce Ferrite Magnet (Black) for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT700B 3.5" heavy-duty titanium super tweeters. MR DJ 3.5-inch square high compression titanium bullet tweeter features flat sides that allow for close side by side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can handle high frequencies with ease and meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system. General Features: 3.5" Titanium Bullet Super Tweeter 1" High-Temperature Kapton Voice Coil 10 oz Ferrite Magnet Structure Peak Power Handling- 300W (Per Tweeter) RMS Power Handling: 50W (Per Tweeter) Black Cutting Finish Die-Cast Aluminum Frame Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

MR DJ HDT1000S 4-Inch Titanium Horn Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT1000S 4" heavy-duty titanium super tweeters. MR DJ 4-inch square high compression titanium bullet tweeter features flat sides that allow for close side-by-side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can handle high frequencies with ease and are meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system.General Features: 4" Titanium Bullet High Compression Tweeter 11 Oz Ferrite Magnet mounting depth of 2-1/2" High-Temperaturerature Kapton Voice Coil, Peak Power Handling- 500W (Per Tweeter) @ 8-Ohm RMS Power Handling: 100W (Per Tweeter) @ 8-Ohm Peak Power Handling- 1500W (Per Tweeter) @ 4-Ohm RMS Power Handling: 450W (Per Tweeter) @ 4-Ohm Impedance 8 OHMS, Crossover Capacitor Included 1.75" High-Temperature Kapton Voice Coil Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Peavey RX™ 14 Compression Driver - Tweeter Horn General Features: Voice Coil Cooling: Ferrofluid Shipping Weight: 38 oz. Net Weight: 33.6 oz. Horn Coupling Threads: Standard 1 3/8" / 18" Horn Coupling Diameter: .938" (23.8 mm) Dimensions: 3.54" (90 mm) diameterx 2.40" (61 mm) depth Flux Density: 11,500 gauss (1.15T) Voice Coil Material: Edge-wound ribbon withhigh temp Kapton bobbin Voice Coil Diameter: 1.4" / 34.4 mm Diaphragm: Commercially pure titanium Lowest Recommended Crossover: 2,000 Hz at 12 dB / Octave Recommended Crossover: 1,800 Hz at 12 dB / Octave Frequency Response: 1.5 kHz to 20 kHz Nominal Efficiency: 30% Sensitivity: 104 dB SPL 1 Watt at 1 meterOn-axis on 90º H x 45º V horn Power Capacity 1000 Hz to 20,000 Hz: 120 W peak60 W program30 W continuous DC Resistance: 6.8 Ohms Minimum Impedance: 7.1 Ohms Nominal Impedance: 8 Ohms Throat Parameter: .938" / 23.8 mm 1.4" Packed Weight: 2.26 lb (1.02 kg) Packed Length: 4.25" (10.79 cm) Packed Width: 4.25" (10.79 cm) Packed Height: 3.25" (8.26 cm) Specifications: Item Number - 3495480 Shipping Weight  :  1.024 kg Shipping Dimensions  :  4.25 × 4.25 × 3.25 in Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ USA DIAPHRAGM1.75 1.75" 44mm Universal Premium Titanium Compression Stage Audio PA DJ Speaker Driver Tweeter Replacement Diaphragm The MR DJ DIAPHRAGM1.75 44MM 1.75" Universal Premium Replacement Compression Driver Diaphragm is the perfect solution for repairing your Compression Driver with voice coils measured at 1.75”. Fit JBL, Peavey, Cerwin Vega, Mackie, Behringer, Gemini, EMB, YAMAHA, ELECTRA VOICE, EV, Pyle-Pro, MR DJ & Many Other Brands Compatible Fits for : Mackie:  1701-8, 17018, CD10-1701-8, CD10-1701, DC10-1701, DC10/1701-8, DC-10-1701, CD10/1701-8, SRM450, SRM-450, SRM 450, C300Z, C-300Z, C 300Z, SA-1521, SA1521, SA 1521, SR-1522, SR1522, SR 1522, 0025666, 0008093, 77005-014, S-215, S215 S 215, S-225, S225, S 225. Behringer: 44T30D8, 44P60A8, 44T60C8, 44P60-8, 44P60A-8, B-1220, B1220 B 1220, B-1520, B-1520, B 1520, EUROLIVE, B-315D, B315D, B412DSP, B 412DSP, 44T30D8, F-1220, F1220, F 1220. General Features: 1.75" 44mm Replacement Diaphragm Voice Coil dimension: 1.75" 44 mm Dome: Titanium CCAW Voice coil Wire Nominal Impedance: 8 ohms Height(Dome): 6.5 mm Overall dimension: 108 mm (4.25") Bracket with gold-plated terminals Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 MR DJ USA TWS400 400 Watts 3.1" x 3.1" Square Compressor Piezo Horn Tweeter The MR DJ TWS400 is a 3.1" x 3.1" Component Square Tweeter with a piezo horn element. It is a Replacement for a DJ Speaker, Loudspeaker, Buzzer, and Treble. These tweeters are designed for Car Audio, Home audio, and speaker Sound Boxes. This MR DJ 4-8ohm piezo horn tweeter has a max wattage of 400 watts and is designed and engineered in the USA. This tweeter has exactly matching specifications as Motorola's KSN1056A tweeter and is the perfect replacement. These are popular tweeters often used in pro, car, and home audio speaker applications. Because of its piezo design, it provides crisp highs and does not require a crossover. Also, it works great as an add-on to any existing audio system to make it sound cleaner and brighter. These are also replacements for home cabinets and work great in-car speaker boxes. General Features: TW Series Super Piezo Bullet Tweeter Super High-Frequency Tweeter Peak Power Handling: 400 watts RMS Power Handling: 150 watts 3.1" Inch DJ Bullet Tweeter Designed for flush and surface mounting 90 Degree sound dispersion Designed for use with a bipolar electric capacitor 4-8 ohms impedance Durable textured ABS construction matches most interiors Always use a bipolar capacitor Frequency Range: 5000-20,000 Hz Sensitivity: 108 dB Nominal Impedance: 8 ohms Sound Dispersion: 90° 1-year Manufacturer's warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. View more great items  

MR DJ USA HDT1000B 4-inch Black High Compression Titanium Bullet Super Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT1000B 4" heavy-duty titanium super tweeters. MR DJ 4-inch square high compression titanium bullet tweeter features flat sides allowing close side-by-side mounting. It has a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can easily handle high frequencies and are meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter can add brilliance and articulation to any professional loudspeaker system.General Features: 4" Titanium Bullet High Compression Tweeter 11 Oz Ferrite Magnet mounting depth of 2-1/2" High-Temperaturerature Kapton Voice Coil, Peak Power Handling- 500W (Per Tweeter) @ 8-Ohm RMS Power Handling: 100W (Per Tweeter) @ 8-Ohm Peak Power Handling- 1000W (Per Tweeter) @ 4-Ohm RMS Power Handling: 200W (Per Tweeter) @ 4-Ohm Impedance 4/8 OHMS, Crossover Capacitor Included 1.75" High-Temperature Kapton Voice Coil Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ USA HDT700S 3.5-inch 500W Black High Compression Titanium Bullet Super Tweeter with 10 Ounce Ferrite Magnet for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT700S 3.5" heavy-duty titanium super tweeters. MR DJ 3.5-inch square high compression titanium bullet tweeter features flat sides, allowing close side-by-side mounting. It has a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can easily handle high frequencies and are meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter can add brilliance and articulation to any professional loudspeaker system. General Features: 3.5" Titanium Bullet Super Tweeter 1" High-Temperature Kapton Voice Coil 10 oz Ferrite Magnet Structure Peak Power Handling- 300W (Per Tweeter) RMS Power Handling: 50W (Per Tweeter) Black Cutting Finish Die-Cast Aluminum Frame Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.