All Car Subwoofers (281)

Power Acoustik BAMF-122RC 12" Speaker Re-Cone Kit General Features: 3" Dual 2ohm, 4-layer voice-coil configuration with direct-connect wire Overcompensating motor structure for increased magnetic strength 12mm t-yoke & top plate improve low-frequency dynamics 1-year manufacturer warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate Prime R2-250X1 Prime Series mono subwoofer amplifier 250 watts RMS x 1 at 2 ohms + R2S-1X12 500W Peak Prime Series (R2SD4) Single 12" Subwoofer Sealed truck-style Loaded Enclosure Rockford Fosgate R2-250X1 Prime Series mono subwoofer amplifier 250-Watt Monoblock Amplifier Rockford Fosgate's R2 amplifiers are the building blocks for great audio systems, powerful enough even to DRIVE our Punch speakers and subwoofers. They have undergone an amazing upgrade by packing them with the latest features at incredible value. Best of all, they are designed and engineered here in Tempe, Arizona. Primed for performance, the R2-250X1 is a 250-watt, class-D amplifier capable of operating at 4Ω or 2Ω mono. This amplifier is extremely efficient because of its class-D technology, which reduces demand on the vehicle's electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. Perfect for subwoofers, a variable infrasonic filter, and remote level control allows you to tune the bass for the desired level of the music. General Features: Rockford Fosgate Prime R2-250X1 Class-D Full-Range Monoblock Amplifier 320 watts x 1 channel @ 4 Ohms RMS Power 600 watts x 2 channel @ 2 Ohms RMS Power Total power output: 250 watts Balanced Differential Inputs with RCA Pass Through Outputs High-Level Input Capable Defeat able Auto Turn-On Circuit Features C.L.E.A.N. Set-up Variable Input Gain adjustment level R.L.C. Remote Level Control Variable Infrasonic Filter Continuously Variable On Board Punch EQ Top Mounted Control Panel Short Circuit & Over Current Protection CEA-2006 Compliant & CE Compliant Full-Range, Class D Rollback Protection Input Sensitivity: Low-Level: 150 mV - 4 V High-Level: 450 mV - 12 V Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers Frequency Response: 20 Hz - 250 Hz Total Harmonic Distortion (THD): >1% Crossover Controls: Low-Pass: 50 Hz - 250 Hz Sub Infrasonic: 15 Hz - 40 Hz Recommended Fuse Rating: 50A Dimensions: "1.9" x "6.8" x "8.1" Authorized Internet Dealer 1-year Manufacturer's Warranty Rockford Fosgate Prime R2S-1X12 500W Peak Prime Series (R2SD4) Single 12" Subwoofer Sealed truck-style Loaded Enclosure When you have no space for bass, our PRIME R2S 12" shallow-loaded enclosure is sure to be a perfect fit for your ride and your budget. These shallow-loaded enclosures can fit in tight spaces due to the slim-line depth of 3.25" on the top and 5.25" on the bottom. The wedge design is optimized for single-cab trucks with limited seat travel. Are you ready to rock out? Yeah, we thought so. The R2S-1X12 is a 12” shallow enclosure with 250 Watts RMS power handling wired to a 2-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high-density carpet, and features quick-release compression terminals. General Enclosure Features: Single 12" Loaded Sealed Box sealed truck-style enclosure with one 12" Prime subwoofer Solid 5/8" medium-density fiberboard construction covered with heavy-duty carpet 12 AWG Spring post terminals Complete with high-density black box carpeting 12" Shallow Mount Prime Stage 2 Series Subwoofer StampCast basket with integrated spider venting CEA-2031 Compliant, accurate power handling rating Power Handling Peak: 500 watts Power Handling RMS: 250 watts Recommended power range: 100 - 250 watts RMS frequency response: 43-250 Hz sensitivity: 85 dB Weight: 27 lbs Dimensions: 5-1/4"BD x 3-3/8"TD x 27-1/4"W x 13-1/2"H Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2S-1X12 package: R2S-1X12 Owners Manual Sealed enclosure loaded with one 12" woofer 2 Mounting brackets Four 3/4" Self-tapping screws Installation and operation instructions ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate Prime R2S-1X12 500W Peak Prime Series (R2SD4) Single 12" Subwoofer Sealed truck-style Loaded Enclosure When you have no space for bass, our PRIME R2S 12" shallow-loaded enclosure is sure to be a perfect fit for your ride and your budget. These shallow-loaded enclosures can fit in tight spaces due to the slim-line depth of 3.25" on the top and 5.25" on the bottom. The wedge design is optimized for single-cab trucks with limited seat travel. Are you ready to rock out? Yeah, we thought so. The R2S-1X12 is a 12” shallow enclosure with 250 Watts RMS power handling wired to a 2-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high-density carpet, and features quick-release compression terminals. General Enclosure Features: Single 12" Loaded Sealed Box sealed truck-style enclosure with one 12" Prime subwoofer Solid 5/8" medium-density fiberboard construction covered with heavy-duty carpet 12 AWG Spring post terminals Complete with high-density black box carpeting 12" Shallow Mount Prime Stage 2 Series Subwoofer StampCast basket with integrated spider venting CEA-2031 Compliant, accurate power handling rating Power Handling Peak: 500 watts Power Handling RMS: 250 watts Recommended power range: 100 - 250 watts RMS frequency response: 43-250 Hz sensitivity: 85 dB Weight: 27 lbs Dimensions: 5-1/4"BD x 3-3/8"TD x 27-1/4"W x 13-1/2"H Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2S-1X12 package: R2S-1X12 Owners Manual Sealed enclosure loaded with one 12" woofer 2 Mounting brackets Four 3/4" Self-tapping screws Installation and operation instructions ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate Prime R2S-1X10 400W Peak Prime Series (R2SD4) Single 10" Subwoofer Sealed truck-style Loaded Enclosure When you have no space for bass, our PRIME R2S 10" shallow-loaded enclosure is sure to be a perfect fit for your ride and your budget. These shallow-loaded enclosures can fit in tight spaces due to the slim-line depth of 3.25" on the top and 5.25" on the bottom. The wedge design is optimized for single-cab trucks with limited seat travel. Are you ready to rock out? Yeah, we thought so. The R2S-1X10 is a 10” shallow enclosure with 200 Watts RMS power handling wired to a 2-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high-density carpet, and features quick-release compression terminals. General Enclosure Features: Single 10" Loaded Sealed Box sealed truck-style enclosure with one 10" Prime subwoofer Solid 5/8" medium-density fiberboard construction covered with heavy-duty carpet 12 AWG Spring post terminals Complete with high-density black box carpeting 10" Shallow Mount Prime Stage 2 Series Subwoofer StampCast basket with integrated spider venting CEA-2031 Compliant, accurate power handling rating Power Handling Peak: 400 watts Power Handling RMS: 200 watts Recommended power range: 100 - 200 watts RMS frequency response: 38-250 Hz sensitivity: 83 dB Weight: 19.9 lbs Dimensions: 5-1/4"BD x 3-1/4"TD x 19-1/8"W x 13-1/2"H Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2S-1X10 package: R2S-1X10 Owners Manual Sealed enclosure loaded with one 10" woofer 2 Mounting brackets Four 3/4" Self-tapping screws Installation and operation instructions ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate Prime R2S-1X10 400W Peak Prime Series (R2SD4) Single 10" Subwoofer Sealed truck-style Loaded Enclosure When you have no space for bass, our PRIME R2S 10" shallow-loaded enclosure is sure to be a perfect fit for your ride and your budget. These shallow-loaded enclosures can fit in tight spaces due to the slim-line depth of 3.25" on the top and 5.25" on the bottom. The wedge design is optimized for single-cab trucks with limited seat travel. Are you ready to rock out? Yeah, we thought so. The R2S-1X10 is a 10” shallow enclosure with 200 Watts RMS power handling wired to a 2-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high-density carpet, and features quick-release compression terminals. General Enclosure Features: Single 10" Loaded Sealed Box sealed truck-style enclosure with one 10" Prime subwoofer Solid 5/8" medium-density fiberboard construction covered with heavy-duty carpet 12 AWG Spring post terminals Complete with high-density black box carpeting 10" Shallow Mount Prime Stage 2 Series Subwoofer StampCast basket with integrated spider venting CEA-2031 Compliant, accurate power handling rating Power Handling Peak: 400 watts Power Handling RMS: 200 watts Recommended power range: 100 - 200 watts RMS frequency response: 38-250 Hz sensitivity: 83 dB Weight: 19.9 lbs Dimensions: 5-1/4"BD x 3-1/4"TD x 19-1/8"W x 13-1/2"H Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2S-1X10 package: R2S-1X10 Owners Manual Sealed enclosure loaded with one 10" woofer 2 Mounting brackets Four 3/4" Self-tapping screws Installation and operation instructions

2 Rockford Fosgate P2D4-12 12" 1600W Car Audio Subwoofer  Rockford Fosgate has always been known as "The PUNCH," and the P2 12" subwoofer continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available. General Features: 12" Dual 4 ohm Punch Stage 2 Subwoofer Power Handling: RMS: 400 watts Power Handling: Peak: 800 watts Recommended power range: 300 - 500 watts RMS Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST; Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Mounting Depth: 6.40" Cutout Diameter: 11.22" Magnet Weight: 72.80 oz Frequency Response: 27.2 - 250 Hz Xmax: 13.3mm Sensitivity: 86 dB @ 1 watt / 1 meter Weight: 16 Ibs 1-year Manufacturer's Warranty Authorized Internet Dealer What is in the P2D4-12 package: P2D4-12 owner's manual Two 12" Dual 4-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual P2D4-12 owner's manual

2 Rockford Fosgate P2D4-12 12" 1600W Car Audio Subwoofer + Absolute DSS12 Sealed Sub Enclosure Box Rockford Fosgate has always been known as "The PUNCH," and the P2 12" subwoofer continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available. General Features: 12" Dual 4 ohm Punch Stage 2 Subwoofer Power Handling: RMS: 400 watts Power Handling: Peak: 800 watts Recommended power range: 300 - 500 watts RMS Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST; Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Mounting Depth: 6.40" Cutout Diameter: 11.22" Magnet Weight: 72.80 oz Frequency Response: 27.2 - 250 Hz Xmax: 13.3mm Sensitivity: 86 dB @ 1 watt / 1 meter Weight: 16 Ibs 1-year Manufacturer's Warranty Authorized Internet Dealer What is in the P2D4-12 package: P2D4-12 owner's manual Two 12" Dual 4-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual P2D4-12 owner's manual

2 Rockford Fosgate P2D4-12 12" 1600W Car Audio Subwoofer Rockford Fosgate has always been known as "The PUNCH," and the P2 12" subwoofer continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available. General Features: 12" Dual 4 ohm Punch Stage 2 Subwoofer Power Handling: RMS: 400 watts Power Handling: Peak: 800 watts Recommended power range: 300 - 500 watts RMS Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST; Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Mounting Depth: 6.40" Cutout Diameter: 11.22" Magnet Weight: 72.80 oz Frequency Response: 27.2 - 250 Hz Xmax: 13.3mm Sensitivity: 86 dB @ 1 watt / 1 meter Weight: 16 Ibs 1-year Manufacturer's Warranty Authorized Internet Dealer What is in the P2D4-12 package: P2D4-12 owner's manual Two 12" Dual 4-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual P2D4-12 owner's manual

2 Rockford Fosgate P2D4-12 12" 1600W Car Audio Subwoofer + Absolute DSS12 Sealed Sub Enclosure Box Rockford Fosgate has always been known as "The PUNCH," and the P2 12" subwoofer continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available. General Features: 12" Dual 4 ohm Punch Stage 2 Subwoofer Power Handling: RMS: 400 watts Power Handling: Peak: 800 watts Recommended power range: 300 - 500 watts RMS Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST; Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Mounting Depth: 6.40" Cutout Diameter: 11.22" Magnet Weight: 72.80 oz Frequency Response: 27.2 - 250 Hz Xmax: 13.3mm Sensitivity: 86 dB @ 1 watt / 1 meter Weight: 16 Ibs 1-year Manufacturer's Warranty Authorized Internet Dealer What is in the P2D4-12 package: P2D4-12 owner's manual Two 12" Dual 4-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual

Rockford Fosgate P2D4-10 10 Dual 4 Ohm Punch Series Double Subwoofers + Absolute DSS10 Dual 10 Sealed Subwoofer Enclosure 2 Rockford Fosgate P2D4-10 10" 1200W Car Audio Subwoofer Subwoofer Rockford Fosgate has always been known as "The PUNCH," and the P2 10" subwoofer continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available. General Features: 10" Dual 4 ohm Punch Stage 2 Subwoofer Power Handling: RMS: 300 watts Power Handling: Peak: 600 watts Recommended power range: 250 - 375 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Stamped Mesh Grille Insert Available: Rockford Fosgate P2P3G-10 Mounting Depth: 5.92" Cutout Diameter: 9.13" Magnet Weight: 66.40 oz Frequency Response: 30.8 - 250 Hz Xmax: 11.0 mm Sensitivity: 84 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ @38.5 Hz Recommended Sealed Enclosure: 0.59ft³ @43.1 Hz Shipping Weight: 13.6 Lbs. Authorized Internet Dealer 1-year Manufacturer's Warranty

2 Rockford Fosgate P2D4-10 10" 1200W Car Audio Subwoofer Subwoofer Rockford Fosgate has always been known as "The PUNCH," and the P2 10" subwoofer continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available. General Features: 10" Dual 4 ohm Punch Stage 2 Subwoofer Power Handling: RMS: 300 watts Power Handling: Peak: 600 watts Recommended power range: 250 - 375 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Stamped Mesh Grille Insert Available: Rockford Fosgate P2P3G-10 Mounting Depth: 5.92" Cutout Diameter: 9.13" Magnet Weight: 66.40 oz Frequency Response: 30.8 - 250 Hz Xmax: 11.0 mm Sensitivity: 84 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ @38.5 Hz Recommended Sealed Enclosure: 0.59ft³ @43.1 Hz Shipping Weight: 13.6 Lbs. Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Rockford Fosgate P3SD2-12 P3SD212 12" 1600W Shallow Mount Car Subwoofers SubsRockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD2-12 shallow-mount 12" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3.65" deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 12" Punch Series Shallow-mount Subwoofer Power Handling: Peak: 800 watts  Power Handling: RMS: 400 watts Recommended power range: 200 - 400 watts RMS Impedance: Dual 2 ohm 2.5" Dual Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone M-Roll Santoprene surround Anodized aluminum cone and dust cap Dual linear spider with embedded 16 AWG tinsel leads Diamond cut cast aluminum trim ring Shallow Motor Assembly Tear and fatigue-resistant poly-cotton spider StampCast basket with integrated spider venting Dual 10 AWG compression speaker connections Optimized for both sealed and vented enclosures Top-mount depth: 3.65" Cutout diameter: 11.22" Frequency Response: 34 - 250 Hz Sensitivity: 85 dB Xmax: 8.4 mm Magnet weight: 1.45 oz Resonance Frequency (Fs): 34 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD2-12 package: Rockford Fosgate P3SD2-12 owner's manual One shallow-mount 12" Dual 2-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual

Rockford Fosgate P3SD2-12 P3SD212 12" 800W Shallow Mount Car Subwoofers SubsRockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD4-12 shallow-mount 12" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3.65" deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 12" Punch Series Shallow-mount Subwoofer Power Handling: Peak: 800 watts  Power Handling: RMS: 400 watts Recommended power range: 200 - 400 watts RMS Impedance: Dual 2 ohm 2.5" Dual Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone M-Roll Santoprene surround Anodized aluminum cone and dust cap Dual linear spider with embedded 16 AWG tinsel leads Diamond cut cast aluminum trim ring Shallow Motor Assembly Tear and fatigue-resistant poly-cotton spider StampCast basket with integrated spider venting Dual 10 AWG compression speaker connections Optimized for both sealed and vented enclosures Top-mount depth: 3.65" Cutout diameter: 11.22" Frequency Response: 34 - 250 Hz Sensitivity: 85 dB Xmax: 8.4 mm Magnet weight: 1.45 oz Resonance Frequency (Fs): 34 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD2-12 package: Rockford Fosgate P3SD2-12 owner's manual One shallow-mount 12" Dual 2-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual

Rockford Fosgate P3SD4-12 P3SD412 12" 800W Shallow Mount Car Subwoofers SubsRockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD4-12 shallow-mount 12" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3.65" deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 12" Punch Series Shallow-mount Subwoofer Power Handling: Peak: 800 watts  Power Handling: RMS: 400 watts Recommended power range: 200 - 400 watts RMS Impedance: Dual 4 ohm 2.5" Dual Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone M-Roll Santoprene surround Anodized aluminum cone and dust cap Dual linear spider with embedded 16 AWG tinsel leads Diamond cut cast aluminum trim ring Shallow Motor Assembly Tear and fatigue-resistant poly-cotton spider StampCast basket with integrated spider venting Dual 10 AWG compression speaker connections Optimized for both sealed and vented enclosures Top-mount depth: 3.65" Cutout diameter: 11.22" Frequency Response: 34 - 250 Hz Sensitivity: 85 dB Xmax: 8.4 mm Magnet weight: 1.45 oz Resonance Frequency (Fs): 34 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD4-12 package: Rockford Fosgate P3SD4-12 owner's manual One shallow-mount 12" Dual 4-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual

Rockford Fosgate P3SD4-12 P3SD412 12" 800W Shallow Mount Car Subwoofers SubsRockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD4-12 shallow-mount 12" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3.65" deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 12" Punch Series Shallow-mount Subwoofer Power Handling: Peak: 800 watts  Power Handling: RMS: 400 watts Recommended power range: 200 - 400 watts RMS Impedance: Dual 4 ohm 2.5" Dual Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone M-Roll Santoprene surround Anodized aluminum cone and dust cap Dual linear spider with embedded 16 AWG tinsel leads Diamond cut cast aluminum trim ring Shallow Motor Assembly Tear and fatigue-resistant poly-cotton spider StampCast basket with integrated spider venting Dual 10 AWG compression speaker connections Optimized for both sealed and vented enclosures Top-mount depth: 3.65" Cutout diameter: 11.22" Frequency Response: 34 - 250 Hz Sensitivity: 85 dB Xmax: 8.4 mm Magnet weight: 1.45 oz Resonance Frequency (Fs): 34 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD4-12 package: Rockford Fosgate P3SD4-12 owner's manual One shallow-mount 12" Dual 4-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.