10" Car Subwoofer (235)

Cerwin Vega VPAS10 / VR10 Under Seat Subwoofer Enclosure + Absolute KIT4 4G AMP Kit car stereo amplifier installation kit Cerwin Vega VPAS10 Under Seat Subwoofer Enclosure The legendary mobile audio industry brand announces its very first powered active subwoofer, the VPAS10 (Vega Powered Active Subwoofer). It consists of an active 10" subwoofer amplified for extreme output. Encased in a solid cast aluminum body frame for superior heat dissipation, the VPAS10 is compact enough to install in the tightest spaces without sacrificing performance. General Features: 10" Low Profile Amplified Subwoofer Power Handling: Peak: 550 watts RMS: 200 watts PWM MOSFET Power Supply/Thermal Protection Circuit Remote Subwoofer Control Included RCA and High-Level Inputs Delayed Soft Remote Turn On Adjustable Input Sensitivity Variable Bass Boost: 0 - +12 dB Variable Low-pass Filter: 85 - 150 Hz Constant Subsonic Filter: @ 35Hz Selectable Phase : 0 or 180 degrees Fuse Rating: 25A x 1 Dimensions: 13.60" L x 9.60" W x 2.60" H (approx) Absolute KIT4 4 Gauge Amplifier Wiring Kit Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega V102DV2 10-inch Dual 2 Ohm Subwoofer 1100 Watt Car Audio Sub DVC Cerwin Vega 10" Subwoofer DVC Vega Series V102DV2 Cerwin Vega Mobile subwoofers are designed and engineered to produce extreme bass in your vehicle, and the V102DV2 10" dual 2-ohm subwoofer is no exception. Packing in an optimized high-powered motor structure along with a stamped carbon fiber polypropylene cone, this subwoofer is built to deliver you nothing but quality bass. Its structure also features a vented pole piece for additional cooling, ensuring you get the most out of your subwoofer. This compact sub also features Cerwin-Vega's signature red surround, so your system can look as good as it sounds. See below for more features and specifications.  General Features: 10" Dual 2 ohm Vega Series Subwoofer Power Handling: Peak: 1100 watts RMS: 400 watts Parabolic one-piece stamped carbon fiber polypropylene cone Double-stitched Vega red Santoprene surround 2.5" Voice Coil Vega concealed mounting gasket Proprietary Stamped Cast Vega Basket Design Top-mount depth: 5.43" Cutout Diameter: 8.82" Sensitivity: 85dB High power integrated impedance selector Optimized high-power single-stacked motor structure Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega VR10 10" Active Under Seat Subwoofer Enclosure CERWIN-VEGA MOBILE’S assortment of award-winning VEGA ACTIVE POWERED SUBWOOFERS provides the ultimate all-in-one Bass Solution Package without taking up any valuable trunk space. With a fully integrated amplifier encased in a cast-aluminum heat sink, and the subwoofer, simple plug-and-play operation is achieved. General Features: Single 10" Sealed Loaded Slim Subwoofer Enclosure with Built-In Amplifier Peak Power Handling: 300 watts RMS Power Handling: 120 watts Final Impedance: 4-ohm Built-in Class D amplifier Sealed Underseat enclosure Compact and slim design, fits under the seat or in the trunk Fully integrated amplifier encased in a cast aluminum heatsink Simple plug-and-play operation and installation PWM MOSFET power supply with thermal protection circuit 8 AWG gauge power and ground wiring is recommended for installation Enclosure Dimensions: 9" TD x 9" W x 3" H Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 10" Subwoofer Polypropylene Subwoofer Cone Rubber Subwoofer Surround High-temperature voice coil VEGA Series Frequency Response: 20 - 180 Hz Amplifier Features: Class D Monoblock Amplifier LED power and protect status indicator Wired remote subwoofer control included Adjustable input sensitivity Delayed soft remote turn on Phase Inversion Switch: 0 or 180 degrees Low-Pass Crossover Frequency: 50 - 180 Hz Bass Boost: 0 - 12 dB Subsonic Filter: Fixed at 20 Hz RCA Preamp Output: No Speaker-level (high-level) inputs Low Level Input sensitivity: 0.3 - 5 volts High Level Input sensitivity: 0.9 - 12 volts Fuse Rating: 20A x 1  Enclosure Features: 10" Sealed Enclosure Cast aluminum heatsink enclosure for durability Box Finish: Black Coated Tough Guard Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Absolute Xcursion Series XS-1000 1500-Watt 10-Inch Single 4-Ohm Slim Shallow Car Subwoofer The Absolute XS-1000 Xcursion Series 10" subwoofer has the formula for hard-hitting bass, a non-pressed pulp cone that combines quick response and durability! You'll enjoy hard-pounding lows and still thrill to the intricacies of your music. A sizeable High excursion foam surround helps to provide a smooth woofer path for accuracy, while the 40 oz. Magnets are designed to handle high power levels. The extended pole piece and oversized, vented backplate work to keep the subwoofer and your music free from distortion. The push spring terminals on this cast basket woofer ensure that your connection is secure and your sound is uninterrupted. The XS-1000 features single voice coils, offering versatility in wiring for high output or maximum efficiency, allowing you to tailor your system to your preference. This sub works well in a sealed or ported enclosure. General Features: 10" Single 4-Ohm Excursion Series Car Subwoofer Power Handling: 1500 Watts P.M.P.O Power Handling: 1000 Watts Max Power Handling: 300 Watts RMS Impedance: Single 4 Ohm Injected polypropylene poly-coated woofer cone for lower distortion Rubber woofer surround Metal basket with black painting Vented oversize backplate with extended pole piece Super slim, shallow mount design Push spring terminals Dust cap with Absolute logo 40 oz. Strontium magnet with rubber coating frequency response 27-1200 Hz sensitivity 86 dB Includes decorative trim ring Top-Mount Depth: 4-1/2" Ported Box Volume: 0.8 cubic feet Sealed Box Volume: 0.5 - 1.08 cubic feet Weight: 9.00lbs Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine RS-W10D4 10" 1200 Watts Shallow Mount Dual 2-Ohm Voice Coil R Series subwooferAlpine's RS-W10D4 R-Series With an ultra-shallow subwoofer design and powerful sound output, the R-Series Shallow Subwoofers give you the best of both worlds in size and sound. General Features: 10" Dual 4 ohms Type-R Series Shallow Subwoofer Peak Power Handling: 1200 watts RMS Power Handling: 600 watts Polypropylene with aluminum dust cap Cone Butyl Rubber Surround Alpine Gen2 DD Linear Magnetic Circuit Cast aluminum basket 4" High-Temperature Voice coil 20 mm Xmax Neodymium magnet motor structure Frequency Response: 29 - 200 Hz Resonance Frequency (Fs): 28 Hz Sensitivity: 81 dB Top-mount depth: 3.25" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the RS-W10D4 package: RS-W10D4 Owner's Manual 10" R-Series Shallow Subwoofer Warranty Information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

JBL GT5-10 10-Inch Single-Voice-Coil Subwoofer The GT5-10D subwoofer features dual 4-ohm s and a vented motor structure and offers 1100 watts of peak power handling. The GT5-10D also features ’s the newest design, combining classic elements with modern ones. the GT5-10D handles 275W/1100W (RMS/Peak) power and offers nearly 20 percent higher Xmax than many competitors. With its fully vented motor structure and rubber-coated tinsel leads, the GT5-10D is able to withstand even the most intense bass assault. Unlike competing entry-level subwoofers, the GT5-10D is based on a solid motor structure featuring two large magnets covered by the classic rubber ring. Big bass with Polypropylene woofer coneRoad noise can destroy realistic audio that always requires true low frequencies. Polypropylene delivers rigidity, with good internal damping, and complete weather resistance. You get an impossible-to-miss increase in thumping bass. Outstanding audio output, low distortionWith 250 watts RMS and 1000 watts of peak power handling, the GT5-12 changes the experience of listening to your favorite music in your car. And a progressive spider gives better control for lower distortion at excursion limits. Exceptional venting for increased power handlingWoofer motor structures heat up during use, causing distortion, or power compression that reduces music’s dynamic range, robbing the sound of realism. JBL uses vented motor structures and polepieces that get rid of more heat to deliver a more serious bang. General Features: JBL high-quality sound at very affordable prices High sensitivity design produces powerful sound Deep true bass with the polypropylene woofer cone Accurate frequency response Outstanding audio output low distortion Exceptional venting for increased power handling 10" Single 4 ohm GT Series Subwoofer Power Handling: Peak: 1100 watts / RMS: 250 watts Impedance: Single 4 ohms Polypropylene cone woofer Frequency response: 30-500 Hz Series: GT5 Size: 10" Nominal Impedance: 4 Ohms Frequency Response: 30Hz - 500Hz Sensitivity(2.83V/1m): 91dB Power Handling (RMS)275 Mounting Depth (in): 5-5/16 Mounting Cutout Diameter (in): 9-3/16 Mounting Cutout Diameter (mm): 233 External Diameter (mm): 264 Mounting Depth (mm): 151 External Diameter (in): 10-3/8 Diecast Aluminum: Proprietary Frame: steel frame Voice Coil: 10" dual-voice-coil subwoofer ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine PSS-TSUB-TYA 10” Subwoofer & Amplifier Upgrade Kit for 2020-2025 Tesla Model Y & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle Boost Your Bass – Get more bass without compromising your usable space. The PSS-TSLA-TYA directly replaces the factory Tesla 160W 8” subwoofer in the rear trunk panel with a powerful, 200W 10” sealed subwoofer without cutting or modification. Paired with the ultra-efficient KTA-200M, this system delivers a dramatic increase in output and low-end clarity, giving your Tesla a noticeably more powerful and immersive audio experience.Ultra-Efficient Power - Using Alpine’s proprietary amplifier technology, Dynamic Peak Power (DPP), the KTA-200M intelligently doubles power during dynamic musical passages for ultimate efficiency, with less than a mile of range at full volume. The lightweight yet durable hybrid carbon fiber cone material reproduces precision bass without adding additional weight to your Tesla.General Features:• Designed for 2020–2025 Tesla Model Y• Direct-fit, sealed 10” subwoofer enclosure - replaces factory subwoofer• Includes Alpine KTA-200M Mono Amplifier• Includes plug-and-play power harness & integration module• Hybrid carbon fiber cone material for precision bass• Alpine H.A.M.R. surround technology for extended excursion• Stealth install retains OEM appearance and cargo space• System tuned specifically for the Tesla Model 3 cabin• No cutting or vehicle modification required• Retains full OEM function• Sound damping recommended (sold separately)TECH SPECS:• Vehicle Compatibility: 2020–2025 Tesla Model Y• Subwoofer Size: 10”• Power Handling: 200W RMS / 500W Peak• Frequency Response: 25Hz–300Hz• Cone Material: Hybrid Carbon Fiber• Surround Technology: Alpine H.A.M.R.• Amplifier: Alpine KTA-200M Mono Amplifier• Amplifier Integration: Includes LOC module & vehicle-specific harnesses• OEM Function: Fully retainedWHAT’S IN THE BOX:• Custom-fit 10” Sealed Subwoofer Enclosure• Alpine KTA-200M Mono Amplifier• Plug-and-Play Integration Harness• Line Output Converter Module• Power Harness• Installation Hardware Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PWV-SB10 10" BassRev™ Powered Subwoofer Enclosure Bring your music to life with the Alpine PWV-SB10, a high-performance 10" powered subwoofer built for deep, impactful bass. With a powerful built-in amplifier delivering 400W RMS (200W x 2) and a dual 4-ohm voice coil design, this subwoofer delivers strong, controlled low frequencies with impressive clarity.Engineered with a sealed enclosure and a wide frequency response of 31–200 Hz, the PWV-SB10 ensures tight, distortion-free bass that enhances any genre of music. Fine-tune your sound with a variable low-pass filter (50–200 Hz), phase selector (0°/180°), and a remote level control for on-the-fly adjustments.Whether you're upgrading a factory system or building a custom setup, the PWV-SB10 offers clean, powerful bass and flexible tuning in one sleek package—the perfect blend of Alpine quality and low-end performance.Specifications:Performance: Amplifier Power Output RMS Per Channel, Ref.: 4 ohm, 14.4V: 400 W (200 W x 2) Speaker Diaphragm size nominal 10 inch (25 cm) Speaker Impedance Dual Voice Coil 4 Ohm + 4 Ohm Speaker Power Handling RMS/Peak: 200W + 200W/400W + 400W Frequency Response +0/-3dB: 31-200 Hz Enclosure Type: Sealed Control: Input Impedance: >10 kOhms Input Sensitivity RCA Input Ref.: Rated Power into 4 Ohms: Hi Level: 0.5 - 10V. Lo level: 0.2 - 2.0V Phase Selector 2 position: 0°/180° Crossover Variable LPF: 50 - 200 Hz (-24 dB/oct.) Remote Level Linear Attenuation 0 to -20dB General Dimensions: Width: 470mm (18 1/2") Height: 282 mm (11") Depth without grille: 126 mm (5") Depth including grille: 170 mm (6 3/4") Weight: 9.7 kg (21 lb 6.4 oz) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PWV-SB10 10" BassRev™ Powered Subwoofer Enclosure & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle Bring your music to life with the Alpine PWV-SB10, a high-performance 10" powered subwoofer built for deep, impactful bass. With a powerful built-in amplifier delivering 400W RMS (200W x 2) and a dual 4-ohm voice coil design, this subwoofer delivers strong, controlled low frequencies with impressive clarity.Engineered with a sealed enclosure and a wide frequency response of 31–200 Hz, the PWV-SB10 ensures tight, distortion-free bass that enhances any genre of music. Fine-tune your sound with a variable low-pass filter (50–200 Hz), phase selector (0°/180°), and a remote level control for on-the-fly adjustments.Whether you're upgrading a factory system or building a custom setup, the PWV-SB10 offers clean, powerful bass and flexible tuning in one sleek package—the perfect blend of Alpine quality and low-end performance.Specifications:Performance: Amplifier Power Output RMS Per Channel, Ref.: 4 ohm, 14.4V: 400 W (200 W x 2) Speaker Diaphragm size nominal 10 inch (25 cm) Speaker Impedance Dual Voice Coil 4 Ohm + 4 Ohm Speaker Power Handling RMS/Peak: 200W + 200W/400W + 400W Frequency Response +0/-3dB: 31-200 Hz Enclosure Type: Sealed Control: Input Impedance: >10 kOhms Input Sensitivity RCA Input Ref.: Rated Power into 4 Ohms: Hi Level: 0.5 - 10V. Lo level: 0.2 - 2.0V Phase Selector 2 position: 0°/180° Crossover Variable LPF: 50 - 200 Hz (-24 dB/oct.) Remote Level Linear Attenuation 0 to -20dB General Dimensions: Width: 470mm (18 1/2") Height: 282 mm (11") Depth without grille: 126 mm (5") Depth including grille: 170 mm (6 3/4") Weight: 9.7 kg (21 lb 6.4 oz) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine HDZ-W10 2400W Peak (800W RMS) 10" Status Series Dual 4-ohm Car Subwoofer, Grille incl. & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle Experience superior bass with the Alpine Status 10” Subwoofer. Expertly engineered for unparalleled sound quality that transforms every drive into a live concert performance.SUPERIOR BASS PERFORMANCEFeaturing the revolutionary Alpine HAMR (High Amplitude Multi-Roll) Surround technology, this subwoofer ensures maximum excursion (20mm Linear Excursion) and performance without compromising on sound quality. The carbon fiber dust cap and pulp-mica cone body are meticulously crafted to deliver durability and crystal-clear bass, even at high volumes.POWER & PRECISIONPower through your tracks with the robust 800W RMS (2400W peak) power handling. Coupled with triple-stacked high-power strontium ferrite magnets, this subwoofer ensures impeccable control and responsiveness, delivering deep, resonating bass for a truly immersive listening experience.SLEEK DESIGN, LASTING DURABILITYEngineered with a cast aluminum frame and premium aluminum trim ring, every detail is crafted to merge style with endurance. The addition of an open-mesh protective grille not only enhances its durability but also ensures your subwoofer remains safeguarded without compromising its appearance.THE ALPINE STATUS DIFFERENCEJoin the elite group of audio enthusiasts who settle for nothing but the best. Whether it's the advanced engineering ensuring consistent, reliable performance, or the sleek design that enhances your car's interior, the Alpine Status subwoofer allows your passion for pure sound to be fulfilled. General Features: High Amplitude Multi-Roll: (HAMR) Surround: (US Pat #8,208,677) Carbon Fiber: Dust Cap Pulp-Mica: Cone Body Dual Progressive: Spiders With Integrated: Tinsel Leads Cast Aluminum: Frame Copper Shorting Cap With': Integrated Radial Heat Sink Integrated Aluminum: Shorting Sleeve Compound Radius Curve: Extended Pole Geometry: (US Pat #6,639,993) Open Mesh Style: Protective Grille Premium Aluminum: Trim Ring 8AWG Insert Terminals: With Series/Parallel: Jumper Plugs 65mm Voice Coil on: Aluminum Former Triple-Stacked High Power: Strontium Ferrite Magnets Airflow Optimized: Dual Flare Pole Vent Specifications: • Size: 10" • Dimensions: 10-7/8" x 10-7/8" x 9-1/4" • Mounting Depth: 7-7/16" • Frequency Response: 24Hz - 200Hz • Power Range: 400W - 800W RMS • Power Handling: 800W RMS/2400W Peak • Magnet Weight: 174 oz (x3) • Voice Coil Diameter: 65.5 mm (2.6") BOX SPECS:Sealed Box Range: • Net Internal Volume: 0.5 - 1.5 ft³ Recommended Sealed Box: • External Dimensions: 13" x 16" x 11.5" • Gross Internal Volume: 0.97 ft³ • Net Internal Volume: 0.85 ft³ • F3, Qtc: 32Hz, 0.97 Vented Box Range: • Net Internal Volume: 1.0 - 1.75 ft³ • Tuning: 32-37HZ Recommended Vented Box: • External Dimensions: 13.25" x 23.5" x 13.25" • Gross Internal Volume: 1.76 ft³ • Vent Area (W x H): 15 in² (3.75” x 4”) • Vent Length: 18" • Vent Displacement: 0.21 ft³ • Net Internal Volume (Vb): 1.43 ft³ • F3, Ripple, Fb: 26Hz, 8.4 dB, 35Hz THIELE-SMALL PARAMETERS • Sensitivity (1W/1m): 82.2 dB • DC Resistance: 6.36Ω • Inductance: 36.3 mH • Free Air Resonance: 33Hz • Equivalent Stiffness: 15.24 L • Mechanical Q: 5.43 • Electrical Q: 0.77 • Total Q: 0.68 • Cone Area: 305 cm² • Linear Excursion: 20 mm • Mechanical Travel: 82 mm Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

JL Audio 10W0v3-4 W0v3 Series 10" 4-ohm subwoofer General Features: 10" 4-ohm subwoofer polypropylene cone with foam surround power range: 75-300 watts RMS peak power handling: 600 watts frequency response: 25-250 Hz sensitivity: 84.07 dB top-mount depth: 4-15/16" sealed box volume: 0.65 cubic feet ported box volume: 1.125 cubic feet grille not included Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.