Mixers & Consoles (109)

Mackie Mix5 5-channel Compact Mixer Whether you need a small mixer for your live show or your creative work, the Mackie Mix5 proves that you don't have to give up decent sound quality just because you need more channels or extra bells and whistles. In addition to the quality Sweetwater engineers have come to expect from Mackie, this highly compact 5-channel mixer offers a single microphone preamplifier outfitted with a 2-band equalizer plus two additional channels with stereo inputs for keyboards or music players. For added convenience, the Mackie Mix5 has an RCA I/O path for recording, and separate volume controls for the main and the headphone outputs. General Features: A high-performance, low-channel-count desktop mixer Mic/line input channel includes a 2-band EQ for tone shaping Preamplifier always provides +15V phantom power for some condenser mics Two stereo channels offer a choice of balanced and unbalanced line input Tape RCA I/O offers additional signal routing options Separate Main Mix and headphone volumes Built to Mackie's toughness standards for portable use 5-channel compact mixer with proven high-headroom, low-noise performance 1-mic/line input with studio-level audio quality stereo 1/4" line inputs 2-band EQ with clean, precise tone shaping Phantom power for studio condenser mics Dedicated stereo RCA inputs/outputs for playback or recording Main L/R outputs Headphone output with separate volume control Rugged, reliable design built to last Extremely compact and portable 1.7" Height 5.5" Width 7.7" Depth 1.4 lbs. Weight Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVi 6500 6-channel 400W Powered Mixer Amplifier with Bluetooth, 6 Inputs, Built-in FX, 9-band Graphic EQ, Aux Audio Input, and SD Card/USB Audio Playback & PV 20' Mic Cable The Peavey PVi 6500 is a revolutionary all-in-one powered mixer. It provides everything a musician needs, including up to six simultaneous combinations of XLR and 1/4" inputs. It uses Peavey's award-winning Silencer mic preamps and 400 watts of power for crystal-clear audio reproduction. The Peavey PVi 6500 also uses exclusive features like Mid Morph EQ to help accurately improve the tone and clarity of vocals. Feedback is quickly, easily identified, and removed with Peavey's 9-band graphic EQ combined with our revolutionary FLS Feedback Locating System. The PVi 6500 is equipped with Kosmos, drastically enhancing the audio spectrum's low and high ends. It is exclusively Peavey technology. Footswitchable built-in 24-bit digital effects complement the already feature-packed unit by allowing users to select multiple varieties of reverb and delay. The onboard 1/4", RCA and 1/8" mini jacks connect almost anything to this versatile mixer. General Features: FLS Feedback Locating System Footswitchable effects defeat Combination XLR and 1/4" input jacks RCA, 1/8" media input Selectable 9-band graphic EQ with FLS Selectable Main or Monitor dual power section RCA Record outputs Onboard 24-bit digital effects with a mute button Clip light and signal present indicator Main line level 1/4" output Speaker protection circuit 48-volt phantom power Bluetooth streaming audio Width Packed: 14"(35.56 cm) Height Packed: 19.75"(50.165 cm) Depth Packed: 13"(33.02 cm) Weight Unpacked: 20.02 lb(9.08 kg) Weight Packed: 22.29 lb(10.11 kg) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVi 6500 6-channel 400W Powered Mixer Amplifier with Bluetooth, 6 Inputs, Built-in FX, 9-band Graphic EQ, Aux Audio Input, and SD Card/USB Audio Playback & 2 MR DJ USA 12 Feet 1/4" Speaker Cables  The Peavey PVi 6500 is a revolutionary all-in-one powered mixer. It provides everything a musician needs, including up to six simultaneous combinations of XLR and 1/4" inputs. It uses Peavey's award-winning Silencer mic preamps and 400 watts of power for crystal-clear audio reproduction. The Peavey PVi 6500 also uses exclusive features like Mid Morph EQ to help accurately improve the tone and clarity of vocals. Feedback is quickly, easily identified, and removed with Peavey's 9-band graphic EQ combined with our revolutionary FLS Feedback Locating System. The PVi 6500 is equipped with Kosmos, drastically enhancing the audio spectrum's low and high ends. It is exclusively Peavey technology. Footswitchable built-in 24-bit digital effects complement the already feature-packed unit by allowing users to select multiple varieties of reverb and delay. The onboard 1/4", RCA and 1/8" mini jacks connect almost anything to this versatile mixer. General Features: FLS Feedback Locating System Footswitchable effects defeat Combination XLR and 1/4" input jacks RCA, 1/8" media input Selectable 9-band graphic EQ with FLS Selectable Main or Monitor dual power section RCA Record outputs Onboard 24-bit digital effects with a mute button Clip light and signal present indicator Main line level 1/4" output Speaker protection circuit 48-volt phantom power Bluetooth streaming audio Width Packed: 14"(35.56 cm) Height Packed: 19.75"(50.165 cm) Depth Packed: 13"(33.02 cm) Weight Unpacked: 20.02 lb(9.08 kg) Weight Packed: 22.29 lb(10.11 kg) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVi 6500 6-channel 400W Powered Mixer Amplifier with Bluetooth, 6 Inputs, Built-in FX, 9-band Graphic EQ, Aux Audio Input, and SD Card/USB Audio Playback The Peavey PVi 6500 is a revolutionary all-in-one powered mixer. It provides everything a musician needs, including up to six simultaneous combinations of XLR and 1/4" inputs. It uses Peavey's award-winning Silencer mic preamps and 400 watts of power for crystal-clear audio reproduction. The Peavey PVi 6500 also uses exclusive features like Mid Morph EQ to help accurately improve the tone and clarity of vocals. Feedback is quickly, easily identified, and removed with Peavey's 9-band graphic EQ combined with our revolutionary FLS Feedback Locating System. The PVi 6500 is equipped with Kosmos, drastically enhancing the audio spectrum's low and high ends. It is exclusively Peavey technology. Footswitchable built-in 24-bit digital effects complement the already feature-packed unit by allowing users to select multiple varieties of reverb and delay. The onboard 1/4", RCA, and 1/8" mini jacks connect almost anything to this versatile mixer. General Features: FLS Feedback Locating System Footswitchable effects defeat Combination XLR and 1/4" input jacks RCA, 1/8" media input Selectable 9-band graphic EQ with FLS Selectable Main or Monitor dual power section RCA Record outputs Onboard 24-bit digital effects with a mute button Clip light and signal present indicator Main line level 1/4" output Speaker protection circuit 48-volt phantom power Bluetooth streaming audio Width Packed: 14"(35.56 cm) Height Packed: 19.75"(50.165 cm) Depth Packed: 13"(33.02 cm) Weight Unpacked: 20.02 lb(9.08 kg) Weight Packed: 22.29 lb(10.11 kg) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie Mix5 5-channel Compact Mixer Whether you need a small mixer for your live show or your creative work, the Mackie Mix5 proves that you don't have to give up decent sound quality just because you need more channels or extra bells and whistles. In addition to the quality Sweetwater engineers have come to expect from Mackie, this highly compact 5-channel mixer offers a single microphone preamplifier outfitted with a 2-band equalizer plus two additional channels with stereo inputs for keyboards or music players. For added convenience, the Mackie Mix5 has an RCA I/O path for recording, and separate volume controls for the main and the headphone outputs. General Features: A high-performance, low-channel-count desktop mixer Mic/line input channel includes a 2-band EQ for tone shaping Preamplifier always provides +15V phantom power for some condenser mics Two stereo channels offer a choice of balanced and unbalanced line input Tape RCA I/O offers additional signal routing options Separate Main Mix and headphone volumes Built to Mackie's toughness standards for portable use 5-channel compact mixer with proven high-headroom, low-noise performance 1-mic/line input with studio-level audio quality stereo 1/4" line inputs 2-band EQ with clean, precise tone shaping Phantom power for studio condenser mics Dedicated stereo RCA inputs/outputs for playback or recording Main L/R outputs Headphone output with separate volume control Rugged, reliable design built to last Extremely compact and portable 1.7" Height 5.5" Width 7.7" Depth 1.4 lbs. Weight Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie ProFX10v3+, 10-Channel Analog Mixer with Enhanced FX, USB Recording Modes, and Bluetooth The Mackie ProFX10v3+ is a 10-channel Analog Mixer with Enhanced FX, USB Recording Modes, and Bluetooth—professional analog mixing with powerful enhancements for studio-quality recordings and live streams. Capture your performance with Onyx preamps and channel EQ, add computer audio via loopback, bring in calls via Bluetooth, and enhance your sound with upgraded GigFX+ e­ects on a color LCD screen. Onyx Preamps Our renowned Onyx mic preamps are designed for maximum studio-quality performance. Ultra-low noise and up to 60dB of gain mean tons of headroom and crystal-clear sound, whether live streaming, podcasting, or recording music. GigFX+ E­ects Engine High-resolution GigFX+ e­ects include 12 FX Processors you can edit and save on the fly via the full-size LCD screen. Combining the warmth of an analog recording console with precise digital e­ects, the ProFXv3+ Series is ideal for home studios and live events. USB Recording Modes Record at pristine 24-bit / 192 kHz quality with a built-in 2×4 USB-C audio interface, complete with three recording modes: Standard for the whole mix with effects, Loopback to include computer audio, and Interface to record channel 1-2 without effects or processing. Bluetooth Use the dedicated Bluetooth channel to send and receive audio from smartphones and tablets. For podcasters, it’s an e­ortless way to receive phone calls. It’s also easy for musicians and performers to stream outside music and backing tracks. General Features: Input Channels: 10 Mono Mic/Line: 4 Stereo Line: 3 Mic Preamp: 4 Global Phantom Power (+48V): Yes 100 Hz Low Cut Filter: Yes Channel EQ: 3-Band Fixed Channel Inserts: 4 Aux Sends: 1 Main Outputs: XLR & 1/4" Main Meters: 2 × 12 Level Controls: Rotary Pots Internal FX: Stereo w/ 12 Customizable FX Processors Compressors: 2 (Knob) Digital Recording: 2×4 192kHz 24-bit Recording Modes: Standard, Loopback, Interface USB Connector: USB-C Power Supply: External 100–240 VAC Weight: 4.9 lb / 2.2 kg Dimensions: 11.9 × 10.7 × 3.3 in / 302 × 272 × 84 mm Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie ProFX10v3, 10-Channel Professional Effects Mixer with USB The Mackie ProFX10v3 is a 10-channel Professional Effects Mixer with USB. Mackie ProFXv3 Series mixers are the ultimate affordable solution for live, home recording, and content creators. Everything you love about the series has been dialed up to 11. Best-in-class sound quality, versatility, and reliability that will have you hugging your mixer regularly. Now, with Onyx mic preamps that offer 60db of headroom, 24 built-in FX, and more. Record your tracks in 24-bit/192kHz quality with 2x4 USB I/O and zero-latency hardware monitoring. Onyx Mic Preamps Mic preamps matter, and our renowned Onyx Mic Preamps are designed for maximum studio-quality performance. Ultra-low noise and up to 60dB of gain mean tons of headroom and crystal-clear sound, even with gain-hungry mics. GIGFX High-Resolution Effects Engine FX is in the name, so it only makes sense that they got a serious upgrade. Now, with 24 great-sounding effects, you have more options than ever to add that finishing touch to a vocal or kick up the drama on your podcast. 2x4 192 KHZ USB Recording Recording in extreme quality is easy with ProFXv3. Sample rates up to 192kHz combined with our Onyx mic preamps ensure the most pristine sound possible. 2x4 I/O is excellent for creating two mixes on your computer and sending each to the mixer, with USB 1/2 sent to your headphones/control room and USB 3/4 sent to a channel strip. Built-In Compression An essential tool for both live and studio, a compressor helps smooth out the audio in that channel by keeping louder audio in check while allowing softer sounds to be pulled up. This is especially great for dynamic sources like vocalists, dialogue, drums, etc. Latency-Free Direct Monitoring When recording, especially in a studio environment, it is crucial to monitor in real-time without delay. But what about tracking from your computer so you can hear your mix and plugins? General Features: Type: Analog Mixer with USB Interface Channels: 10 (4 x mono, 3 x stereo) A/D Resolution: 24-bit/192kHz Phantom Power: Yes Aux Sends: 1 x FX Send (post) Inserts: 4 x 1/4" (channel) Headphones: 1 x 1/4" USB: 1 x Type B EQ Bands: 3-band EQ, 100Hz Low-cut Filter Signal Processing: 2 x Channel Compressors Height: 3.3" Width: 11.9" Depth: 10.7" Weight: 4.9 lbs. Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie ProFX6v3 6-Channel Mixer with USB and Effects + Pair of  XLR Cable + Magnet Phone Holder Bundle Mackie ProFX6v3 6-Channel Professional Effects Mixer with USB The Mackie ProFX6v3 Professional Effects Mixer with USB is affordable for live, home recording, and content creators. It now features Onyx mic preamps that offer 60db of headroom and 24 built-in FX. Record your tracks in 24-bit/192kHz quality with 2x4 USB I/O and zero-latency hardware monitoring. Pro Tools | First and Waveform OEM recording software/plugin packages are included.Mix / Record / CreateWhether you are mixing live polka, recording your next autoharp hit, or streaming your world record hula hoop attempt, ProFXv3 Series mixers are here to take your project to the next level. General Features: Up to 60dB of gain and ultra-low noise High-resolution GigFX effects engine 24 different FX options, from reverbs to delays Lay down your tracks in incredible 24-bit/192kHz quality 2x4 USB I/O allows you to create two custom mixes single-knob compression for maximum channel headroom ProTools | First includes 23 plugins DAW Essentials Bundle for Waveform OEM Solid steel chassis with tough ABS side protection Rugged design will stand up to the wear and tear of the road 2-band EQ and 100Hz low-cut filter on both channels 48-volt phantom power USB for playback music and recording into your computer Balanced XLR and balanced/unbalanced outputs The headphone output has a separate volume control for comfortable monitoring. Type: Analog Mixer with USB Interface Channels: 6 (2 x mono, 2 x stereo) Computer Connectivity: USB (2 x 4) A/D Resolution: 24-bit/192kHz Faders: Rotary Pots Inputs - Mic Preamps: 2 x XLR-1/4" combo (mic/line/Hi-Z) Phantom Power: Yes Inputs - Line: 2 x 1/4" (line), 1 x 1/8" (stereo) Outputs - Main: 2 x XLR, 2 x 1/4" (L/R) Headphones: 1 x 1/4" USB: 1 x Type B EQ Bands: 2-band EQ, 100Hz Low-cut Filter Effects: GigFX Engine: Reverbs, Chorus, Delay, Flange, Auto-Wah Software: Waveform OEM DAW, FX Plug-in Collection Power Source: 12V DC power supply (included) Height: 2.9" Width: 8.4" Depth: 7.5" Weight: 2.6 lbs. What's in the ProFX6v3 package: 6-Channel mixer 59" DC power supply 12VDC/2A output 76" USB cable type-A to type-B / 2.0 Quickstart guide Waveform OEM download card/license code ProFX6v3 owner's manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

Mackie Performer Bundle With ProFX6V3 Mixer EM-89D Mics and Headphones  The Mackie Performer Bundle is perfect for vocalists, karaoke, solo artists, and more who need straightforward mixing and reliable, great-sounding mics. The ProFX6v3 mixer features ultra-low noise Onyx mic preamps, 24 built-in effects, and USB recording and playback. The EM-89D dynamic microphones are great for various sources, including vocals and instruments. MC-100 professional headphones provide clear sound with excellent noise isolation to dial in your sound just right. From the stage to the home studio, the Mackie Performer Bundle gives you the tools always to sound your best General Features: Mackie Performer Bundle Includes ProFX6v3 6-Channel Professional Effects Mixer with USB EM-89D (2 Included) Dynamic Vocal Microphone MC-100 Professional Headphones ProFX6v3 – 6-Channel Professional Effects Mixer with USB: 2 Renowned Onyx Mic Preamps High-Resolution GigFX™ Effects Engine with 24 effects 24-Bit / 192kHz 2x4 USB Recording Interface EM-89D Dynamic Vocal Microphone: Professional sound quality and rugged construction Excels both onstage performance and studio recording Great for vocals and instruments Cardioid polar pattern Included accessories: Mic clip XLR cable Zipper pouch MC-100 Professional Headphones: High-performance drivers ensure precise, accurate sound Comfortable ear pads and headband for hours of use Includes 1/4" adapter Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie ProFX6v3 6-Channel Professional Effects Mixer with USB The Mackie ProFX6v3 Professional Effects Mixer with USB is affordable for live, home recording, and content creators. It now features Onyx mic preamps that offer 60db of headroom and 24 built-in FX. Record your tracks in 24-bit/192kHz quality with 2x4 USB I/O and zero-latency hardware monitoring. Pro Tools | First and Waveform OEM recording software/plugin packages are included.Mix / Record / CreateWhether you are mixing live polka, recording your next autoharp hit, or streaming your world record hula hoop attempt, ProFXv3 Series mixers are here to take your project to the next level. General Features: Up to 60dB of gain and ultra-low noise High-resolution GigFX effects engine 24 different FX options, from reverbs to delays Lay down your tracks in incredible 24-bit/192kHz quality 2x4 USB I/O allows you to create two custom mixes single-knob compression for maximum channel headroom ProTools | First includes 23 plugins DAW Essentials Bundle for Waveform OEM Solid steel chassis with tough ABS side protection Rugged design will stand up to the wear and tear of the road 2-band EQ and 100Hz low-cut filter on both channels 48-volt phantom power USB for playback music and recording into your computer Balanced XLR and balanced/unbalanced outputs The headphone output has a separate volume control for comfortable monitoring. Type: Analog Mixer with USB Interface Channels: 6 (2 x mono, 2 x stereo) Computer Connectivity: USB (2 x 4) A/D Resolution: 24-bit/192kHz Faders: Rotary Pots Inputs - Mic Preamps: 2 x XLR-1/4" combo (mic/line/Hi-Z) Phantom Power: Yes Inputs - Line: 2 x 1/4" (line), 1 x 1/8" (stereo) Outputs - Main: 2 x XLR, 2 x 1/4" (L/R) Headphones: 1 x 1/4" USB: 1 x Type B EQ Bands: 2-band EQ, 100Hz Low-cut Filter Effects: GigFX Engine: Reverbs, Chorus, Delay, Flange, Auto-Wah Software: Waveform OEM DAW, FX Plug-in Collection Power Source: 12V DC power supply (included) Height: 2.9" Width: 8.4" Depth: 7.5" Weight: 2.6 lbs. What's in the ProFX6v3 package: 6-Channel mixer 59" DC power supply 12VDC/2A output 76" USB cable type-A to type-B / 2.0 Quickstart guide Waveform OEM download card/license code ProFX6v3 owner's manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Yorkville Sound M810-2, 10+2 Channel Stereo Box Mixer - 2x400W The Yorkville Sound M810-2, 2x 400w, 10 inputs Mixer/Amp lighter weight and small 'footprint' of a box mixer with the tilt-back visibility and channel control access of a desk mixer makes these new 'wedge' mixers an ideal high power, high quality powered mixer solutions. High-powered high-efficiency class-H power amplifiers, newly designed input strips, on-board DSP, a new, more effective master EQ section and ten very useful and usable input channels complete the new 'wedge' mixer packages. Product Specification:   Number of Channels: 10 Mono Channel EQ: Low, Mid, High Stereo Channel EQ: Low, Mid, High Channel Effects: All Channels Monitors Effects:  Yes Balance Controls: Ch. 7 - 10 Pan Controls: Ch. 1 - 6 Channel Overload Protection: Ch. 1 - 6 Inputs - XLR (bal): 8 Inputs - 1/4": 10 Inputs - RCA (unbal): 1 Pair Mute Switches: Global 1 - 8 Activity / Solo LED: Trim Set Ch. 1 - 6 Clip / Mute LED: All Channels Phantom Power: 48V + LED Indicator Internal Effects: 24 Bit stereo, 16 Effects with Parameter Pot Auxiliary Sends: Effect - Monitor Effects Send: Yes Effects Return: Internal Effects Return to Main: Yes Effects Return to Monitor: Yes Reverb / Effects Footswitch: Yes Record Outputs: Stereo RCA Pair Max Gain to Line Out -Mic Input (dB): 84 Max Gain to Line Out -Line Input (dB): 82 Master EQ -1 (type/Channels/Range -dB): Graphic 9 band (160hz-6.3khz) +2 band Shelving Monitor EQ -1 (type/Channels/Range-dB): Graphic 9 band (160hz-6.3khz) +2 band Shelving Main Outputs (Line Level): 2 x 1/4inch TRS Main Amp Inputs (Line Level): 2 x 1/4inch TRS Monitor Outputs (Line Level): 1 x 1/4inch TRS Outputs - Amp A - 1/4" Jacks:  2 Outputs - Amp A - Speakon 4-pin: 1 Outputs - Amp B - 1/4" Jacks: 2 Outputs - Amp B - Speakon 4-pin: 1 Mixer - Signal to Noise Ratio (dB): 105 Mixer - Freq Resp (Tone and EQ Flat,2dB): 20 - 20,000 Mixer- Input Ref Noise to line out @150 Ohms(dBv): -119 Mixer THD (Main out w/ -10dB input): 0.0001 Amp A-Power Output@8 Ohms (0.1 PER THD 1kHz): 250 Amp A - Power Output @ 4 Ohms: 400 Amp A - Power Output –other: 400 @ 2 ohms Amp B-Power Output@8 Ohms (0.1 PER THD 1kHz): 250 Amp B - Power Output @ 4 Ohms: 400 Amp B - Power Output –other: 400 @ 2 ohms THD - 1kHz (dB): 0.001 THD - 20Hz-20kHz (dB): 0.005 Hum and Noise (un / Aweight -dB): 0.94392523364486 Typical crosstalk -1 kHz (dB-:  better than -60db Input Impedance - Bal/Unbal (Ohms): 20k / 10k ohms Input Sesitivity (Vrms Sine): 1.4 CMRR @ 60Hz (min/typ): -37db / -60db Max Votage Gain (dB): 29 Power Consumption (typ/max): 4.2A @ 60Hz / 2.2A @ 50Hz Protection: Thermal, Short Circuit, Current, Clip Cooling: 2 x 80mm Fans Transformer Type: Toroidial Finish: Grey and Black Powder Coat Chassis Construction: Steel and Aluminum Rackmount: Yes (Kit Available - 6U) Other Features: Tiltback or Upright Wedge Angles Dimensions (DWH, inches): 11.1 x 18.6 x 11 Dimensions (DWH, cm): 28 x 47 x 28 Weight (lbs/kg): 28.2 / 12.8 Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.