Angled & Truck Loaded Sub Boxes (28)

Power Acoustik PUB-10L Powered Enclosure w/ 10″ Subwoofer & RGB LED Lighting General Features: Powder Coated Diecast Aluminum Enclosure RGB LED Lighting Floods the Subwoofer with Light 800w Class D Monoblock Subwoofer Amplifier Variable 50-150Hz 12dB Low Pass Crossover Variable 0-12dB Bass Boost Centered at 45Hz 0-1800 Signal Phase Switch for Dynamic Response High-Level Input on Quick Disconnect Harness Optional High-Level Signal Sense Auto-Turn On 200m V-6V Stereo Low-Level RCA Input 8g Power/Ground Wire Input Terminal Dash-Mount Remote Control Included 10.25”w x 3.375”h x 13.50”L ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine SWT-S10 1200W Max Single 10" Sealed Subwoofer Bass Tube Enclosure Combining the intense low-bass performance and ground-shaking output of the traditional Type-R subwoofers in a thin package optimized for tiny enclosures. The SWT 10” Truck Subwoofer has been engineered to offer more installation flexibility without sacrificing enormous output to build the ideal sound system for your truck. At 4-1/8” deep. These subs provide deep bass performance where it usually couldn’t fit in a truck. And the vented pole optimized for a 4-1/8” deep box is the ideal enclosure size, meaning excellent bass performance can fit just about anywhere in your truck. General Features: Single 10" Sealed Subwoofer Tube Enclosure 1200 Watts MAX Power Handling 250 Watts RMS Power Handling Final Impedance: 4 ohms Preloaded with a single 10" Subwoofer Sealed enclosure with embroidered black carpet Enclosure Dimensions: 11.25"W x 23.65" D 1-year Manufacturer's Warranty Subwoofer Features: 10" Passive Subwoofer Push SPK Terminal Frequency Response: 35-200 Hz Sensitivity: 90dB Enclosure Features: Tube enclosure Black Carpet Finish with White Alpine Logo Grille included What is in the SWT-S10 package: W10S4 owner's manual One 10" Subwoofer per box Adhesive-backed foam gasket Application Guide Online product registration information Warranty Information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SWT-S10 1200W Max Single 10" Sealed Subwoofer Bass Tube Enclosure Combining the intense low-bass performance and ground-shaking output of the traditional Type-R subwoofers in a thin package optimized for tiny enclosures. The SWT 10” Truck Subwoofer has been engineered to offer more installation flexibility without sacrificing enormous output to build the ideal sound system for your truck. At 4-1/8” deep. These subs provide deep bass performance where it usually couldn’t fit in a truck. And the vented pole optimized for a 4-1/8” deep box is the ideal enclosure size, meaning excellent bass performance can fit just about anywhere in your truck. General Features: Single 10" Sealed Subwoofer Tube Enclosure 1200 Watts MAX Power Handling 250 Watts RMS Power Handling Final Impedance: 4 ohms Preloaded with a single 10" Subwoofer Sealed enclosure with embroidered black carpet Enclosure Dimensions: 11.25"W x 23.65" D 1-year Manufacturer's Warranty Subwoofer Features: 10" Passive Subwoofer Push SPK Terminal Frequency Response: 35-200 Hz Sensitivity: 90dB Enclosure Features: Tube enclosure Black Carpet Finish with White Alpine Logo Grille included What is in the SWT-S10 package: W10S4 owner's manual One 10" Subwoofer per box Adhesive-backed foam gasket Application Guide Online product registration information Warranty Information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Absolute 6.5PKB Empty 6.5" Single Angled/Wedge Subwoofer Enclosure Speaker Box - Black Absolute enclosures have created a solid portfolio of reliability over the years, and the 6.5-inch box PKB is no different. Like most products on the list, it adopts a sealed, airtight chamber design, created using a high-end MDF wood finish to work its magic. Its greatest strength, however, must be its lightweight nature that does not compromise on longevity, partly thanks to the thick, durable carpet that covers the whole enclosure. General Features: Sealed airtight chamber each holds (1) 6.5 Inches speaker One Pair of 6.5" Angled Single Sealed Speaker Enclosures Speaker mounting depth: 4" Durable 1/2" Medium Density Fiberboard (MDF) construction Black carpet finish One set of spring terminals Each box is stuffed with polyfill Box Volume (net. int.): 0.20 cubic feet (per box) Solid MDF construction, Durable carpet, and Speaker terminal cup Black Color Cutout: 5" Total Air Volume: 0.09 Cubic Ft. Weight: 3 Lbs. Mounting Depth: 4 1/4" Dimensions: Height: 8 1/8” Length: 8 1/8" Depth: 5" Construction: 1/2"High-Density MDF Wood Carpeted With Durable Trunk Liner Finish 1 Spring-Loaded Terminal ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Absolute 6.5PKB Empty 6.5" Single Angled/Wedge Subwoofer Enclosure Speaker Box - Black Absolute enclosures have created a solid portfolio of reliability over the years, and the 6.5-inch box PKB is no different. Like most products on the list, it adopts a sealed, airtight chamber design, created using a high-end MDF wood finish to work its magic. Its greatest strength, however, must be its lightweight nature that does not compromise on longevity, partly thanks to the thick, durable carpet that covers the whole enclosure. General Features: Sealed airtight chamber each holds (1) 6.5 Inches speaker One Pair of 6.5" Angled Single Sealed Speaker Enclosures Speaker mounting depth: 4" Durable 1/2" Medium Density Fiberboard (MDF) construction Black carpet finish One set of spring terminals Each box is stuffed with polyfill Box Volume (net. int.): 0.20 cubic feet (per box) Solid MDF construction, Durable carpet, and Speaker terminal cup Black Color Cutout: 5" Total Air Volume: 0.09 Cubic Ft. Weight: 3 Lbs. Mounting Depth: 4 1/4" Dimensions: Height: 8 1/8” Length: 8 1/8" Depth: 5" Construction: 1/2"High-Density MDF Wood Carpeted With Durable Trunk Liner Finish 1 Spring-Loaded Terminal ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Absolute 6.5PKB Empty 6.5" Single Angled/Wedge Subwoofer Enclosure Speaker Box - Black Absolute enclosures have created a solid portfolio of reliability over the years, and the 6.5-inch box PKB is no different. Like most products on the list, it adopts a sealed, airtight chamber design, created using a high-end MDF wood finish to work its magic. Its greatest strength, however, must be its lightweight nature that does not compromise on longevity, partly thanks to the thick, durable carpet that covers the whole enclosure. General Features: Sealed airtight chamber each holds (1) 6.5 Inches speaker One Pair of 6.5" Angled Single Sealed Speaker Enclosures Speaker mounting depth: 4" Durable 1/2" Medium Density Fiberboard (MDF) construction Black carpet finish One set of spring terminals Each box is stuffed with polyfill Box Volume (net. int.): 0.20 cubic feet (per box) Solid MDF construction, Durable carpet, and Speaker terminal cup Black Color Cutout: 5" Total Air Volume: 0.09 Cubic Ft. Weight: 3 Lbs. Mounting Depth: 4 1/4" Dimensions: Height: 8 1/8” Length: 8 1/8" Depth: 5" Construction: 1/2"High-Density MDF Wood Carpeted With Durable Trunk Liner Finish 1 Spring-Loaded Terminal ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Absolute 6.5PKB Empty 6.5" Single Angled/Wedge Subwoofer Enclosure Speaker Box - Black Absolute enclosures have created a solid portfolio of reliability over the years, and the 6.5-inch box PKB is no different. Like most products on the list, it adopts a sealed, airtight chamber design, created using a high-end MDF wood finish to work its magic. Its greatest strength, however, must be its lightweight nature that does not compromise on longevity, partly thanks to the thick, durable carpet that covers the whole enclosure. General Features: Sealed airtight chamber each holds (1) 6.5 Inches speaker One Pair of 6.5" Angled Single Sealed Speaker Enclosures Speaker mounting depth: 4" Durable 1/2" Medium Density Fiberboard (MDF) construction Black carpet finish One set of spring terminals Each box is stuffed with polyfill Box Volume (net. int.): 0.20 cubic feet (per box) Solid MDF construction, Durable carpet, and Speaker terminal cup Black Color Cutout: 5" Total Air Volume: 0.09 Cubic Ft. Weight: 3 Lbs. Mounting Depth: 4 1/4" Dimensions: Height: 8 1/8” Length: 8 1/8" Depth: 5" Construction: 1/2"High-Density MDF Wood Carpeted With Durable Trunk Liner Finish 1 Spring-Loaded Terminal ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Pioneer TS-WX1210AM 12” 1300 Max Power Built-in Amplifier Active Ported Pre-Loaded Enclosure Subwoofer The TS-WX1210AM ported enclosure subwoofer features a strong and lightweight IMPP™ (Injection-Molded Polypropylene) composite speaker cone to enhance your music with deep, rich bass. It also features a Class-D amplifier built into the side of the enclosure to amplify the bass to high volumes. It also makes for a more compact design that fits into tight spaces in today's smaller vehicles. The subwoofer enclosure comes with customizable settings, which include an adjustable bass boost to ensure the user can get the type of bass they want, depending on their own taste in music. General Features: 150 watts Single Ported Subwoofer Enclosure Peak Power Handling: 300 watts RMS Power Handling: 150 watts Final Impedance: 4 ohms Preloaded with single 12" Subwoofers Vented / Ported Hatchback Style, Angled Back enclosure 12" Hatchback Style Enclosure Box Finish: Carpet Class-D Amplifier Customizable settings such as bass boost The enclosure is fully carpeted, creating a non-slip, durable, and scratch-resistant surface Cellulose Cone Subwoofer Foam Surround Subwoofer Frequency Response: 30 - 130 Hz Sensitivity: 113dB dB Class D amplifier uses less power, takes up less space, and generates less heat than traditional amplifier designs Enclosure Dimensions: 10" TD x 12-1/2" BD x 19-3/4" W x 14-7/8" H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Absolute USA SAG10 Heavy Duty 3/4" MDF Sealed Angle hatchback-style Single 10" Subwoofer Shallow Sub Enclosure Truck Box Absolute USA hatchback-style Truck Box Bass enclosures come built to last and are ready to help your sub deliver real low-frequency firepower. These unloaded boxes feature high-grade, medium-density fiberboard construction with sealed inner braces that help combat resonance by reducing vibrations. Adding bass to a regular cab truck can be a real headache! Luckily we have the perfect solution for this problem. This single 10″ enclosure will fit into any regular cab truck and is designed to fit directly behind the seat. This sealed enclosure is designed for sound clarity, and the box has enough mounting depth for entry and flat-piston style subwoofer(s). We recommend purchasing subwoofer grille(s) for this model enclosure to protect your sub(s) from rubbing into the seat. General Featured: Heavy Duty Sealed Angle Single 10-Inch Subwoofer Enclosure Subwoofer Box 10-Inch Sealed Ported MDF Enclosure High Quality 5/8" MDF Construction Gold Binding Post loaded terminal cups 10" Single Universal Truck Style Sealed Subwoofer Enclosure Completely miter and dado end panels Premium carpeted finish High Quality 3/4" MDF construction Glued and braced with fasteners Total box volume: 0.58 cubic feet Color: Black Dimensions: 4-5/8"TD x 8-1/8"BD x 16-1/8"W x 13-1/2"H What's in the SAG10 package: Single hatchback-style enclosure for 10" subwoofer with spring-post terminals ⚠️Warning:Cancer and Reproductive Harm

Absolute 6.5PKB Empty 6.5" Single Angled/Wedge Subwoofer Enclosure Speaker Box - Black Absolute enclosures have created a solid portfolio of reliability over the years, and the 6.5-inch box PKB is no different. Like most products on the list, it adopts a sealed, airtight chamber design, created using a high-end MDF wood finish to work its magic. Its greatest strength, however, must be its lightweight nature that does not compromise on longevity, partly thanks to the thick, durable carpet that covers the whole enclosure. General Features: Sealed airtight chamber each holds (1) 6.5 Inches speaker One Pair of 6.5" Angled Single Sealed Speaker Enclosures Speaker mounting depth: 4" Durable 1/2" Medium Density Fiberboard (MDF) construction Black carpet finish One set of spring terminals Each box is stuffed with polyfill Box Volume (net. int.): 0.20 cubic feet (per box) Solid MDF construction, Durable carpet, and Speaker terminal cup Black Color Cutout: 5" Total Air Volume: 0.09 Cubic Ft. Weight: 3 Lbs. Mounting Depth: 4 1/4" Dimensions: Height: 8 1/8” Length: 8 1/8" Depth: 5" Construction: 1/2"High-Density MDF Wood Carpeted With Durable Trunk Liner Finish 1 Spring-Loaded Terminal ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine SBT-S10V Truck Loaded SWT Enclosure 1000W Peak (350W RMS) Single 10" Loaded Ported Subwoofer Enclosure With a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications, with a design that works in small spaces. The Alpine logos on the front and the bottom offer convenient visibility options when mounted horizontally or vertically. Creates a symmetrical magnetic field with evenly distributed flux density to reduce distortion while improving power handling and output significantly. Provides the mechanical clearance needed for over 50mm of peak-to-peak excursion, unleashing massive output potential from a small package. The High-Amplitude Multi Roll Surround Design allows for extreme excursions without sacrificing valuable cone area. FEA Optimized for linearity and made with injection-molded Santoprene ®, the HAMR surround is a key part of the suspension system that provides accurate, distortion-free control at extreme excursions. More Bass, Less SpaceWith a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications, with a design that works in small spaces.Two-Way Alpine Logo FlexibilityThe Alpine logos on the front and the bottom offer convenient visibility options when mounted horizontally or vertically.Significant Output in a Compact Package with 4 Unique Alpine Subwoofer TechnologiesRadial Vented VC Heat Sink & Airflow Management SystemActively manages voice coil temperatures by forcing air directly across the heat sink system. FEA Optimized Dual-Sided Machined CRC Motor Structure Creates a symmetrical magnetic field with evenly distributed flux density to reduce distortion while improving power handling and output significantly. FEA Optimized Injection Molded TPE Spider with Pass-Through Gap Design Provides the mechanical clearance needed for over 50mm of peak-to-peak excursion, unleashing massive output potential from a small package Subwoofer Features: 10" SWT Series Single 2-ohm Shallow Mount Subwoofer Peak Power Handling: 1000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround, featuring H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding Frequency Response: 28 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty Enclosure Features: Ported angled / wedge-style truck enclosure 3/8" medium-density fiberboard (MDF) construction Automotive-grade dark grey carpet 8AWG Push Terminals Protective mesh subwoofer grilled included Dimensions: 7"D x 22"W x 16"H What's in the SBT-S10V package: Ported enclosure loaded with one 10" woofer 2 Mounting plates Six 1/2" Self-tapping screws Owner's manual (English/ French/ Spanish) Installation notes Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine SBT-S10V Truck Loaded SWT Enclosure 1000W Peak (350W RMS) Single 10" Loaded Ported Subwoofer Enclosure With a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications, with a design that works in small spaces. The Alpine logos on the front and the bottom offer convenient visibility options when mounted horizontally or vertically. Creates a symmetrical magnetic field with evenly distributed flux density to reduce distortion while improving power handling and output significantly. Provides the mechanical clearance needed for over 50mm of peak-to-peak excursion, unleashing massive output potential from a small package. The High-Amplitude Multi Roll Surround Design allows for extreme excursions without sacrificing valuable cone area. FEA Optimized for linearity and made with injection-molded Santoprene ®, the HAMR surround is a key part of the suspension system that provides accurate, distortion-free control at extreme excursions. More Bass, Less SpaceWith a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications, with a design that works in small spaces.Two-Way Alpine Logo FlexibilityThe Alpine logos on the front and the bottom offer convenient visibility options when mounted horizontally or vertically.Significant Output in a Compact Package with 4 Unique Alpine Subwoofer TechnologiesRadial Vented VC Heat Sink & Airflow Management SystemActively manages voice coil temperatures by forcing air directly across the heat sink system. FEA Optimized Dual-Sided Machined CRC Motor Structure Creates a symmetrical magnetic field with evenly distributed flux density to reduce distortion while improving power handling and output significantly. FEA Optimized Injection Molded TPE Spider with Pass-Through Gap Design Provides the mechanical clearance needed for over 50mm of peak-to-peak excursion, unleashing massive output potential from a small package Subwoofer Features: 10" SWT Series Single 2-ohm Shallow Mount Subwoofer Peak Power Handling: 1000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround, featuring H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding Frequency Response: 28 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty Enclosure Features: Ported angled / wedge-style truck enclosure 3/8" medium-density fiberboard (MDF) construction Automotive-grade dark grey carpet 8AWG Push Terminals Protective mesh subwoofer grilled included Dimensions: 7"D x 22"W x 16"H What's in the SBT-S10V package: Ported enclosure loaded with one 10" woofer 2 Mounting plates Six 1/2" Self-tapping screws Owner's manual (English/ French/ Spanish) Installation notes Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 Rockford Fosgate Punch P1-2X12 1000W Peak Dual 12" Loaded Subwoofer Enclosure Ported General  Features: Two 12" Single 4-ohm Punch Stage 1 Subwoofers Total Power Handling: Peak: 1000 watts RMS: 500 watts Recommended power range: 250 - 600 watts RMS @ 2-ohm CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16-gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surrounds for larger surface area. Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue resistant and reduced strain "stitched on" flexible lead wire design. Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate. High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar. Die-Cast aluminum soft-touch painted trim ring allows for the optional integrated grill. Stamped Mesh Grille Insert Available: Rockford Fosgate P1G-12 Magnet Weight: 45 oz Frequency Response: 20 - 250 Hz Xmax: 9mm Enclosure Features: Dual 12" Loaded, Ported Box Solid 5/8" MDF Construction Front-firing tuned port. Spring-loaded binding posts Complete with high-density black box carpeting Dimensions: 15-1/8"D x 33-7/8"W x 15-3/4"H ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Absolute USA SAG10 Heavy Duty 3/4" MDF Sealed Angle hatchback-style Single 10" Subwoofer Shallow Sub Enclosure Truck Box Absolute USA hatchback-style Truck Box Bass enclosures come built to last and are ready to help your sub deliver real low-frequency firepower. These unloaded boxes feature high-grade, medium-density fiberboard construction with sealed inner braces that help combat resonance by reducing vibrations. Adding bass to a regular cab truck can be a real headache! Luckily we have the perfect solution for this problem. This single 10″ enclosure will fit into any regular cab truck and is designed to fit directly behind the seat. This sealed enclosure is designed for sound clarity, and the box has enough mounting depth for entry and flat-piston style subwoofer(s). We recommend purchasing subwoofer grille(s) for this model enclosure to protect your sub(s) from rubbing into the seat. General Featured: Heavy Duty Sealed Angle Single 10-Inch Subwoofer Enclosure Subwoofer Box 10-Inch Sealed Ported MDF Enclosure High Quality 5/8" MDF Construction Gold Binding Post loaded terminal cups 10" Single Universal Truck Style Sealed Subwoofer Enclosure Completely miter and dado end panels Premium carpeted finish High Quality 3/4" MDF construction Glued and braced with fasteners Total box volume: 0.58 cubic feet Color: Black Dimensions: 4-5/8"TD x 8-1/8"BD x 16-1/8"W x 13-1/2"H What's in the SAG10 package: Single hatchback-style enclosure for 10" subwoofer with spring-post terminals ⚠️Warning:Cancer and Reproductive Harm

Alpine SBT-S10V Truck Loaded SWT Enclosure 1000W Peak (350W RMS) Single 10" Loaded Ported Subwoofer Enclosure With a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications, with a design that works in small spaces. The Alpine logos on the front and the bottom offer convenient visibility options when mounted horizontally or vertically. Creates a symmetrical magnetic field with evenly distributed flux density to reduce distortion while improving power handling and output significantly. Provides the mechanical clearance needed for over 50mm of peak-to-peak excursion, unleashing massive output potential from a small package. The High-Amplitude Multi Roll Surround Design allows for extreme excursions without sacrificing valuable cone area. FEA Optimized for linearity and made with injection-molded Santoprene ®, the HAMR surround is a key part of the suspension system that provides accurate, distortion-free control at extreme excursions. More Bass, Less SpaceWith a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications, with a design that works in small spaces.Two-Way Alpine Logo FlexibilityThe Alpine logos on the front and the bottom offer convenient visibility options when mounted horizontally or vertically.Significant Output in a Compact Package with 4 Unique Alpine Subwoofer TechnologiesRadial Vented VC Heat Sink & Airflow Management SystemActively manages voice coil temperatures by forcing air directly across the heat sink system. FEA Optimized Dual-Sided Machined CRC Motor Structure Creates a symmetrical magnetic field with evenly distributed flux density to reduce distortion while improving power handling and output significantly. FEA Optimized Injection Molded TPE Spider with Pass-Through Gap Design Provides the mechanical clearance needed for over 50mm of peak-to-peak excursion, unleashing massive output potential from a small package Subwoofer Features: 10" SWT Series Single 2-ohm Shallow Mount Subwoofer Peak Power Handling: 1000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround, featuring H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding Frequency Response: 28 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty Enclosure Features: Ported angled / wedge-style truck enclosure 3/8" medium-density fiberboard (MDF) construction Automotive-grade dark grey carpet 8AWG Push Terminals Protective mesh subwoofer grilled included Dimensions: 7"D x 22"W x 16"H What's in the SBT-S10V package: Ported enclosure loaded with one 10" woofer 2 Mounting plates Six 1/2" Self-tapping screws Owner's manual (English/ French/ Spanish) Installation notes Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.