Car Dashboard Installation Accessories (20)

METRA 99-6519B 2005-2007 Dodge Charger Single-DIN/Double-DIN Installation Kit, Matte Black Your Dodge is a great car, but the dash design makes installing a new stereo difficult. This Metra 99-6519B dash kit package allows you to install a double-DIN (4" tall) aftermarket stereo while maintaining all factory controls in your car's dash opening. Interchange Part Number: CD-K639B What's in the box: Radio housing Radio Trim-panel Pocket 2 Brackets Six #6 x 3/8" screws Four #8 x 3/8" screws 6 Panel-clips Installation Instructions Vehicle Compatibility:Dodge: 2005 - 2007 Magnum 2006 - 2007 Charger Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

METRA 99-6519S 2005-2007 Dodge Charger Single-DIN/Double-DIN Installation Kit, Silver Your Dodge is a great car, but the dash design makes installing a new stereo difficult. This Metra 99-6519S dash kit package allows you to install a double-DIN (4" tall) aftermarket stereo while maintaining all factory controls in your car's dash opening. Interchange Part Number: CD-K639S What's in the box: Radio housing Radio Trim-panel Pocket 2 Brackets Six #6 x 3/8" screws Four #8 x 3/8" screws 6 Panel-clips Installation Instructions Vehicle Compatibility:Dodge: 2005 - 2007 Magnum 2006 - 2007 Charger Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Absolute Compatible Fit for 2007-2011 Nissan Altima Single/Double Din Dash Kit Install Wire harness antenna Interchange Part Number: Metra: 99-7423 + 70-7552 + 40-NI12 American International: ND-K727 + NWH-704 + NI-6 Scosche: NN1642B + NN04B + NAA2B Xscorpion: NISK0710DDP+NIS1704+NISA106 Dash Kit: Single or Double DIN dash installation kit It is specially designed for a double DIN or two Single DIN units Specially designed side mount brackets Showing a gapless fit between the dash and the kit Designed to match factory dash contours Paint matches factory dash color High grade & Heavy-Duty ABS plastic structure Factory OEM style texture Comes with radio housing, trim plate, bracket, mounting screws, and illustrated instruction for easy installation Note: Designed to Work with Non-Digital Climate Controls Only Kit Includes: Radio Housing Radio Housing Trim Plate Radio Housing Brackets Pocket Mounting Screws Harness: Aftermarket car stereo wiring harness 20-Pin female wiring harness that plugs into the factory harness Provide power for four speakers Allow installment of aftermarket radio using OEM wiring and connector No factory wiring cutting is needed High-quality ABS plastic molded connector for the perfect fit Heat resistant for lasting a lifetime Pre-stripped to make installation quick and easy Vehicle compatibility charts may vary depending on your vehicle options, production dates, and install the application. Please inquire before purchasing Connections guide: Orange – Dash Light Dimmer/Illumination Green – Left Rear Speaker (+) Green with Black Stripe Left Rear Speaker (-) White – Left Front Speaker (+) White with Black Stripe – Left Front Speaker (-) Purple – Right Rear Speaker (+) Purple with Black Stripe – Right Rear Speaker (-) Gray – Right Front Speaker (+) Gray with Black Stripe – Right Front Speaker (-) Antenna features: Antenna Cable to Aftermarket Radio Adapter Use When Replacing Factory Radio Quick and Easy Installation Quality Crafted to Factory's Rigid Specification Also Same as Metra 40-NI12/ Best Kits NI-6/ Scosche NAA2 Compatible with: Nissan: 2007-2011 Altima (Non-Digital Climate Controls Only) Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

American International NDK727 Car Radio Stereo Single Double DIN Dash Kit for 2007-2012 Nissan Altima Interchange Dash Kit Part Number: Metra 99-7423, Scosche NN1642B This double DIN for the 2007-2013 Nissan Altima has been painted, designed, and contoured to match the factory dashboard and can be used to install one double DIN or two single DIN units. The dash kit is made from high-grade, heavy-duty ABS plastic. General Features: Double DIN Installation Dash Kit With Harness & Antenna Specifically Designed For Double DIN Or Two Single DIN Units Compatible With 2007-2013 Nissan Altima Vehicles Designed For Double DIN, (2) Single DIN, Or DIN Designed And Contoured To Match Factory Dashboard Painted To Match Factory Dash Color High-Grade ABS Plastic Structure Factory Style Texture Design Color: Black Finest material for a good fit and durability Provides exceptional reliability Ensures everlasting service life Authorized Internet Dealer 1-year Sonic Manufacturer Warranty What is in the NDK727 package? Radio Housing Radio Housing Trim Plate Radio Housing Brackets Storage Pocket Mounting Screws Compatible vehicles: 2007-2012 Nissan Altima Sedan (Non-Digital Climate Controls Only) 2007-2013 Nissan Altima Coupe (Non-Digital Climate Controls Only) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

American International NDK727, NI-6, NWH704 Car Radio Stereo Single Double DIN Dash Kit Harness Compatible Fits for 2007-2012 Nissan Altima Interchange Dash Kit Part Number: Metra 99-7423 Scosche NN1642B Interchange Harness Part Number: Metra 70-7552, Scosche NN04B Interchange Antenna Part Number: Metra 40-NI12, Scosche NAA2B American International NDK727 Installation Kit for Nissan 2007-13 Altima, 2-Din This double DIN for the 2007-2013 Nissan Altima has been painted, designed, and contoured to match the factory dashboard. It can install one double DIN or two single DIN units. The dash kit uses a high-grade, heavy-duty ABS plastic structure. General Features: Double DIN Installation Dash Kit With Harness & Antenna Specifically Designed For Double DIN Or Two Single DIN Units Compatible With 2007-2013 Nissan Altima Vehicles Designed For Double DIN, (2) Single DIN Or DIN Designed And Contoured To Match Factory Dashboard Painted To Match Factory Dash Color High-Grade ABS Plastic Structure Factory Style Texture Design Color: Black Finest material for good fit and durability Provides exceptional reliability Ensures everlasting service life Authorized Internet Dealer 1-year Sonic Manufacturer Warranty What is in the NDK727 package: Radio Housing Radio Housing Trim Plate Radio Housing Brackets Storage Pocket Mounting Screws American International NWH704 Ai for Nissan Wire Harness 07 & Up General Features: Harness Plugs Into Factory Harness 20-Pin Plug Plugs Into Factory Harness At Radio Provides Power And 4 Speakers Heat Resistance For Great Power Handling Allows Installation Of Aftermarket Radio Using Factory Wiring And Connector High-Quality ABS Plastic Molded Connector For The Perfect Fit Pre-Stripped To Make Installation Quick And Easy No Cutting Of Factory Wiring Needed American International NI6 Antenna Adapter For Nissan Radio To Aftermarket Radio General features: Antenna Cable To Aftermarket Radio Adapter Use When Replacing Factory Radio Quick And Easy Installation Quality Crafted To Factory's Rigid Specification Also Same As Metra 40-NI12/ Best Kits NI-6/ Scosche NAA2 Compatible vehicles: 2007-2012 Nissan Altima Sedan (Non-Digital Climate Controls Only) 2007-2013 Nissan Altima Coupe (Non-Digital Climate Controls Only) Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

American International NDK727, NI-6, NWH704 Car Radio Stereo Single Double DIN Dash Kit Harness for 2007-2012 Nissan Altima Interchange Dash Kit Part Number: Metra 99-7423 Scosche NN1642B Interchange Harness Part Number: Metra 70-7552, Scosche NN04B Interchange Antenna Part Number: Metra 40-NI12, Scosche NAA2B American International NDK727 Installation Kit for Nissan 2007-13 Altima, 2-Din This double DIN for the 2007-2013 Nissan Altima has been painted, designed, and contoured to match the factory dashboard. It can be used to install one double DIN or two single DIN units. The dash kit uses a high-grade, heavy-duty ABS plastic structure. General Features: Double DIN Installation Dash Kit With Harness & Antenna Specifically Designed For Double DIN Or Two Single DIN Units Compatible With 2007-2013 Nissan Altima Vehicles Designed For Double DIN, (2) Single DIN Or DIN Designed And Contoured To Match Factory Dashboard Painted To Match Factory Dash Color High-Grade ABS Plastic Structure Factory Style Texture Design Color: Black Finest material for good fit and durability Provides exceptional reliability Ensures everlasting service life Authorized Internet Dealer 1-year Sonic Manufacturer Warranty What is in the NDK727 package: Radio Housing Radio Housing Trim Plate Radio Housing Brackets Storage Pocket Mounting Screws American International NWH704 Ai for Nissan Wire Harness 07 & Up General Features: Harness Plugs Into Factory Harness 20-Pin Plug Plugs Into Factory Harness At Radio Provides Power And 4 Speakers Heat Resistance For Great Power Handling Allows Installation Of Aftermarket Radio Using Factory Wiring And Connector High-Quality ABS Plastic Molded Connector For The Perfect Fit Pre-Stripped To Make Installation Quick And Easy No Cutting Of Factory Wiring Needed American International NI6 Antenna Adapter For Nissan Radio To Aftermarket Radio General features: Antenna Cable To Aftermarket Radio Adapter Use When Replacing Factory Radio Quick And Easy Installation Quality Crafted To Factory's Rigid Specification Also Same As Metra 40-NI12/ Best Kits NI-6/ Scosche NAA2 Compatible vehicles: 2007-2012 Nissan Altima Sedan (Non-Digital Climate Controls Only) 2007-2013 Nissan Altima Coupe (Non-Digital Climate Controls Only) Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

American Terminal Compatible Fits for 2007-2011 Nissan Altima Single/Double Din Dash Kit Install Wire harness antenna Interchange Part Number: Metra: 99-7423 + 70-7552 + 40-NI12 American International: ND-K727 + NWH-704 + NI-6 Scosche: NN1642B + NN04B + NAA2B Xscorpion: NISK0710DDP+NIS1704+NISA106 Dash Kit: Single or Double DIN dash installation kit It is specially designed for a double DIN or two Single DIN units Specially designed side mount brackets Showing a gapless fit between the dash and the kit Designed to match factory dash contours The paint matches the factory dash color High-grade and heavy-duty ABS plastic structure Factory OEM style texture Comes with radio housing, trim plate, bracket, mounting screws, and illustrated instructions for easy installation Note: Designed to Work with Non-Digital Climate Controls Only Kit Includes: Radio Housing Radio Housing Trim Plate Radio Housing Brackets Pocket Mounting Screws Harness: Aftermarket car stereo wiring harness 20-pin female wiring harness that plugs into the factory harness Provide power for four speakers Allow installment of aftermarket radio using OEM wiring and connector No factory wiring cutting is needed High-quality ABS plastic molded connector for the perfect fit Heat resistant for lasting a lifetime Pre-stripped to make installation quick and easy The vehicle compatibility chart may vary depending on your vehicle options, production dates, and application installation. Please inquire before purchasing Connections guide: Orange – Dash Light Dimmer/Illumination Green – Left Rear Speaker (+) Green with Black Stripe Left Rear Speaker (-) White – Left Front Speaker (+) White with Black Stripe – Left Front Speaker (-) Purple – Right Rear Speaker (+) Purple with Black Stripe – Right Rear Speaker (-) Gray – Right Front Speaker (+) Gray with Black Stripe – Right Front Speaker (-) Antenna features: Antenna Cable to Aftermarket Radio Adapter Use When Replacing Factory Radio Quick and Easy Installation Quality Crafted to Factory's Rigid Specification Also Same as Metra 40-NI12/ Best Kits NI-6/ Scosche NAA2 Compatible with: Nissan: 2007-2011 Altima (Non-Digital Climate Controls Only) Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Metra 99-6519S Compatible Fit for Dodge Charger/Magnum 2005-2007 (without Factory Nav) - Silver Vehicle Compatibility: Dodge Charger 2005-2007 (w/o Factory Nav) Magnum 2005-2007 (w/o Factory Nav) This stereo installation kit has been engineered to help you install either a 2” tall (Single-DIN) or a 4” tall (Double-DIN) aftermarket radio into the original vehicle dashboard. This dash kit makes radio replacement simple and comes with a pocket installed below the 2” radio to fill the extra space in the radio opening, which can be used for storage. The pocket is not needed when installing a 4” tall radio. The dash kit is painted silver to match the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer, but this dash kit is required to make it fit. Stereo installation kit designed to fit any standard 2” or 4” tall aftermarket radio Painted silver (also available in scratch-resistant matte black: 99-6519B and carbon fiber: 99-6519CF) Designed for models without factory navigation Made from the highest quality ABS plastic for an original factory-like fit and finish Includes the 99-6510 radio housing, brackets, and hardware parts needed with detailed installation instructions Wiring and Antenna Connections: Wiring Harness AXVI-6502 (sold separately) AXDI-CH13 (sold separately) Antenna Adapter 40-CR10 (Sold Separately) Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Absolute Car Stereo Dash Install Mounting Kit Wire Harness Radio Antenna Compatible Fits for Chrysler Jeep Dodge 2004 - 2008 package Interchange Part Number: METRA 99-6507 + 70-1817 + 40-CR10, American International CD-K648 + CWH638 + CR6, Scosche: CR1286B + CR02B +CRAB   ACD-K648 Single DIN Installation Kit This dash kit allows you to replace your vehicle's factory stereo and improve the overall sound quality of your car's audio system. It is made of high-quality automotive-grade ABS plastic to match the texture of your factory dash. Installation is simple. No special tools are required; the step-by-step instructions will guide you through the process. General Features: Single DIN Installation Dash Kit with Harness & Antenna Designed to match factory dash contours The paint matches the factory dash color High grade & Heavy Duty ABS plastic structure Provides custom radio install appearance Factory OEM style texture It includes radio housing, brackets, wire harness & manual instruction ACWH-638 Wire Harness A wire harness is necessary for a quick installation when replacing your factory radio with an after-market car stereo. It eliminates cutting your OE radio plug, helping to maintain your car's value. After connecting it, your installation is simple, as the wires will color-match and easily connect to the after-market stereo. Without a wiring harness, you must cut the factory harness and test each wire to connect to your radio. General Features: Wire harness plugs into factory OEM radio It provides power and four speakers High-quality ABS plastic molded connector for the perfect fit Heat resistant for lasting a lifetime No factory wiring cutting is needed Pre-stripped to make installation quick and easy ACR10 The ACR10 or Metra 40-CR10 adapter connects an aftermarket receiver to the factory antenna cable. It has a male Motorola plug on one end and a snap-lock female antenna jack on the other. The adapter's length is 5-3/4". General Features: Factory Antenna Replacement to Aftermarket Radio Converts factory antenna to standard Motorola male when replacing factory radio Snap-lock type connector Quick and Easy Installation Vehicle Compatible List:Chrysler: 2005 - 2007 300 2007 Aspen 2006 - 2010 PT Cruiser Dodge: 2007 - 2008 Caliber 2005 - 2007 Charger 2005 - 2007 Dakota 2004 - 2007 Durango 2005 - 2007 Magnum 2006 - 2008 Ram Pickup Jeep: 2005 - 2007 Grand Cherokee 2006 - 2007 Commander 2007 - 2008 Compass 2007 Patriot Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Metra 99- 3023HG Single-DIN Dash Kit Install & 40-EU55 Antenna Adapter Compatible Fit 2017-2020 Chevrolet Trax This stereo installation kit has been engineered to help you install a 2" tall (Single-DIN) aftermarket radio into the original vehicle dashboard. This dash kit makes radio replacement simple. It comes with a pocket that is installed below the 2" radio to fill the extra space in the radio opening, which can be used for storage. The dash kit is painted high gloss black to match the original look and feel of the vehicle's dashboard. Sub-dash modifications are required for this installation, and instructions are included. Installing an aftermarket radio can upgrade the sound quality and provide additional features that the original factory radio couldn't offer, but it requires a dash kit to make it fit. Compatible Vehicles 2017 Chevrolet Trax 2018 Chevrolet Trax 2019 Chevrolet Trax 2020 Chevrolet Trax General Features: Allows for the installation of an aftermarket Single-Din or Double-Din car stereo Compatible with select 2017-2020 Chevrolet Trax Vehicles Includes a storage pocket below the radio for single DIN mounting Accommodates ISO Single DIN mount Designed and manufactured with precision tolerances Gapless fit between the dash and the kit Painted to match factory dash color Factory-matched texture style High-grade ABS plastic construction Color: Black Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the 99-3023HG package: Radio Housing Radio Trim Panel Radio Housing Brackets Storage Pocket #8 x 3/8" Phillips Screws (4) Step-by-step instructions Wiring and Antenna Connections: Harness TBA Antenna Adapter 40-EU55 Steering wheel control interface ASWC-1 (sold separately) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Metra 99-3023HG Single-DIN Dash Kit Install Compatible Fit 2017-2020 Chevrolet Trax This stereo installation kit has been engineered to help you install a 2" tall (Single-DIN) aftermarket radio into the original vehicle dashboard. This dash kit makes radio replacement simple. It comes with a pocket that is installed below the 2" radio to fill the extra space in the radio opening, which can be used for storage. The dash kit is painted high gloss black to match the original look and feel of the vehicle's dashboard. Sub-dash modifications are required for this installation, and instructions are included. Installing an aftermarket radio can upgrade the sound quality and provide additional features that the original factory radio couldn't offer, but it requires a dash kit to make it fit. Compatible Vehicles 2017 Chevrolet Trax 2018 Chevrolet Trax 2019 Chevrolet Trax 2020 Chevrolet Trax General Features: Allows for the installation of an aftermarket Single-Din or Double-Din car stereo Compatible with select 2017-2020 Chevrolet Trax Vehicles Includes a storage pocket below the radio for single DIN mounting Accommodates ISO Single DIN mount Designed and manufactured with precision tolerances Gapless fit between the dash and the kit Painted to match factory dash color Factory-matched texture style High-grade ABS plastic construction Color: Black Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the 99-3023HG package: Radio Housing Radio Trim Panel Radio Housing Brackets Storage Pocket #8 x 3/8" Phillips Screws (4) Step-by-step instructions Wiring and Antenna Connections: Harness TBA Antenna Adapter 40-EU55 (sold separately) Steering wheel control interface ASWC-1 (sold separately) Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

METRA 99-6519B 2005-2007 Dodge Charger Single-DIN/Double-DIN Installation Kit, Matte Black Your Dodge is a great car, but the dash design makes it difficult to install a new car stereo. This Metra 99-6519B dash kit package allows you to install a double-DIN (4" tall) aftermarket stereo while maintaining all factory controls in your car's dash opening.  Interchange Part Number: CD-K639B What's in the box: Radio housing Radio Trim-panel Pocket 2 Brackets Six #6 x 3/8" screws Four #8 x 3/8" screws 6 Panel-clips Installation Instructions Vehicle Compatibility:Dodge: 2005 - 2007 Magnum 2006 - 2007 Charger Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.