6.5" Component Car Speakers (142)

Rockford Fosgate Punch P165-SI 240W Peak (120W RMS) 6.5" 2-Way Component System with Internal Crossover Fanatics that need a great sounding speaker to replace factory installed versions will certainly benefit from this Punch series full range speaker. The P165-SI offers a Flex Fit2™ basket to ensure compatibility with U.S., European, and import vehicles. European installers will love this new "European Basket" to easily fit a variety of VW, Citroen, and Vauxhall models. The system also features an ICC (Integrated Concealed Crossover), eliminating the need to mount any black boxes. The Punch P165_SI is a P1 full-range speaker system featuring a true 6.5" midrange optimized for a wide variety of U.S., European, and import vehicles, and a coaxial mounted tweeter. General Features: 6-1/2" 2-Way Car Component System Power Handling: Peak: 240 watts per set / 120 watts each side RMS: 120 watts per set / 60 watts each side Recommended power range: 10 - 60 watts RMS per channel 6-1/2" mineral-filled polypropylene woofer Santoprene rubber surround Separate 1" PEI dome tweeter Integrated crossover concealed in speaker basket Crossover is built into mid-woofer, less parts less hassle Vertical Attach Surround Technique (VAST) increases cone area 4 ohms impedance Frequency Response: 44-20,000 Hz Top-mount Depth: 2-1/4" Sensitivity: 88 dB Grills Included Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: 2 Woofers 2 Woofer grilles 2 Tweeters (6" speaker wire attached terminated with female quick-slide connectors) 2 Front flush mount brackets 2 Rear flush mount brackets 2 Angled surface mounting housings 2 Tweeter trim rings Two M4x25mm Machine screws Two M4x10mm Machine screws Two M4x15mm Stud bolts Eight 1-1/4" Allen head screws 3mm Allen head bit 8 Speed clips Two 39" Lengths of tweeter speaker wire (each with male quick slides on one end and female quick slides on the other) Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian) Rockford Fosgate P165-SI owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov  

Cerwin Vega XED650C 61/2" component & XED46 4X6" Coaxial Car/truck speakers & GMSB345 Speaker Adapter Kit & 2 Pair Metra 72-4568 Speaker Harness Compatible Fit for 1995-2006 Silverado This Bundle Includes: Cerwin Vega XED650C Cerwin Vega  XED46 American International – GMSB345 2 Pair Metra 72-4568 Cerwin-Vega XED650C 600W 6.5" 2-Way Component Power Handling Speaker Experience the clear, vibrant sound and hear aspects of songs you need to be aware of with premium-quality products by Carwin-Vega designed and manufactured to make you hear the music and 'feel' it. Made from premium-quality materials, each unit from this brand ensures nothing less than long-lasting performance while providing the best live concert experience. General Features: 6.5" XED Series 2-Way Component System Peak Power Handling: 300 watts RMS Power Handling: 30 watts Curvilinear polypropylene cone Butyl rubber surround Linear woven treated red spider 1" balanced metal dome CV tweeter Frequency Response: 60-18,000 Hz Top-mount Depth: 2.2" Sensitivity: 93dB High-Grade External Crossover Network Signature Cerwin-Vega Sound! Grills and Hardware Authorized Internet Dealer 1-year Manufacturer's Warranty Cerwin-Vega XED46 300W 4x6" XED Series 2-way Coaxial Speakers Defy all odds and overcome budget limitations with the best-in-class XED SERIES SPEAKERS that provide quality sound reproduction without breaking the bank. Harnessed with suitable power handling capability and balanced metal dome tweeters, XED SERIES SPEAKERS offers tremendous value and sound that will be music to your ears. General Features: 4" x 6" XED Series 2-way Coaxial Car Speakers Peak Power Handling: 300 watts per pair / 150 watts each RMS Power Handling: 40 watts per pair / 20 watts each Curvilinear Polypropylene cone material Butyl Rubber speaker surround 1" Balanced Metal Dome tweeters Black coat stamped steel basket Top-mount Depth: 2" Cutout Dimensions: 3.8 x 6"  Impedance: 4 ohms Speaker grilles included Authorized Internet Dealer 1-year Manufacturer's Warranty American International GMSB345 Speaker Adapter General Features: Designed For Installation Of 5.25″ Or 6″ Speakers Sold As A Pair Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-S80C - Next-Generation S-Series 8" Component Speaker Set Unparalleled Performance: The S2-S80C is meticulously crafted using a unique combination of polypropylene, Glass Fiber, and Mica Cone materials. This construction ensures lightweight design, high output, and low distortion, resulting in a clean and precise audio experience that exceeds expectations. Enhanced Bass Response: Immerse yourself in powerful and accurate bass notes thanks to the integration of Alpine's exclusive High Amplitude Multi-Roll (HAMR) surround technology. This innovation enables maximum cone movement, delivering deep and impactful low-frequency performance. Versatile Tweeter Design: The S2-S80C includes 1" tweeters with threaded removable housing, allowing for flexible placement and easy customization of the speaker setup. Achieve optimal sound staging and imaging by adjusting the tweeters to suit your listening preferences. Seamless Integration: With an 8" woofer size, in-line crossovers, and OEM fitment, the S2-S80C component speaker set offers seamless integration into your vehicle's audio system. Experience an upgrade in sound quality while maintaining a factory-like appearance. General Features: 8" 2-way component speaker system 8" polypropylene/glass-fiber/mica woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing In-line crossovers for easier installation frequency range: 50-40,000 Hz Peak Power Handling:  520 watts per set / 260 watts on each side RMS Power Handling: 170 watts per set / 85 watts on each side Rubber speaker surround High Amplitude Multi-Roll surround technology Ferrite magnet motor structure Impedance: 4 ohms Sensitivity: 80 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S2-S80C package: S2-S80C owner's manual 2 Woofers 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Warranty information Online product registration information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

2 Pair Alpine S2-S65C 480W Peak (160W RMS) 6.5" S-Series 2-way Component Speaker System Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S65C 6.5” Component Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers, resulting in a more accurate and natural sound at an entry-level price point. Crafted with a unique combination of polyphylene, Glass Fiber, and Mica Cone materials, the S2-S65 is designed for lightweight construction, high output, and low distortion, giving you a clean and accurate audio experience. General Features: 6-1/2" 2-way Component System Car Speakers Peak Power Handling: 480 watts per set / 240 watts on each side RMS Power Handling: 160 watts per set / 80 watts on each side Polypropylene cone material Rubber speaker surround High Amplitude Multi-Roll surround technology HI-RES Certified 1" Silk Dome Tweeters Ferrite magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 55 - 40000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the SAlpine S2-S65C package: 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets 2 Foam self-adhesive pads 2 Foam self-adhesive rings Eight 1-3/16" Screws Warranty information Alpine S2-S65C owner's manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

2 Pair Cerwin-Vega XED650C 600W 6.5" 2-Way Component Power Handling Speaker Experience the clear, vibrant sound and hear the key aspects of songs with premium-quality products by Carwin-Vega, designed and manufactured to help you hear the music and 'feel' it. Made from premium-quality materials, each unit from this brand ensures nothing less than long-lasting performance while providing the best live concert experience. General Features: 6.5" XED Series 2-Way Component System Peak Power Handling: 300 watts RMS Power Handling: 30 watts Curvilinear polypropylene cone Butyl rubber surround Linear woven treated red spider 1" balanced metal dome CV tweeter Frequency Response: 60-18,000 Hz Top-mount Depth: 2.2" Sensitivity: 93dB High-Grade External Crossover Network Signature Cerwin-Vega Sound! Grills and Hardware Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate R1675-S  Prime 6.75" Component System Pair The Prime Series Component System is a new generation of factory replacement speaker delivering authentic Rockford Fosgate sound. The R1675-S is a dedicated 2-way component system utilizing a Mica injected polypropylene cone for extended frequency response and accommodates direct OEM installation. The tweeter features a Mylar¨ balanced dome to reproduce crystal clear highs, an in-line crossover for simplifying installation, and accommodates flush, surface and angle mounting. 1/2" (13mm) mylar balanced dome tweeter Foam surround Mica-injected polypropylene cone Stamped steel basket Specification CEA-2031 Compliant: CEA-2031 Guidelines Configuration: 2-Way Component System Nominal Impedance (Ohms): 4-Ohm Frequency Response (Hz): 55Hz - 20kHz Midrange Nominal Diameter (cone/diaphragm): 6.75" Midrange Mounting Depth: 2.0" (51.2 mm) Tweeter Mounting Depth: 1.06" (26.88 mm) Crossover Tweeter High-Pass (HP): 4.5kHz @ 6dB/octave Sensitivity (dB @ 1W/1M): 89 Grille/Trim Ring Included: Yes Mounting Hardware: Yes Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio H65A 300W Peak (150W RMS) 6.5" HEX Series 2-Way 4-ohm Component Speaker System  Discover the unparalleled audio excellence of Diamond Audio's HEX Series Speakers, where high-end craftsmanship meets esoteric design. Revered for their crisp, extended highs and sparkling detail, these speakers offer pinpoint mid-bass accuracy, making them the ultimate choice for discerning audiophiles and professional musicians alike. The HEX Series embodies a rich heritage of innovation and quality, delivering an in-car listening experience that is nothing short of extraordinary. Utilizing exotic materials and cutting-edge technology, these speakers are engineered to perfection. The HEX Series Speakers are not just a product; they are a statement of high-end audio prowess. Experience the solid, die-cast aluminum alloy basket that houses the powerful components, ensuring durability and aesthetic appeal. The adjustable phase and tweeter attenuation provide the flexibility to tailor the sound to your preferences. Elevate your in-car audio experience with the Diamond Audio HEX Series Speakers. Feel the difference that superior craftsmanship and cutting-edge technology can make. Rediscover your favorite music with the HEX Series – the preferred choice of professional recording artists and musicians around the world. General Features: New 6.5” die-cast aluminum alloy basket 25mm neodymium tweeters  Hard anodized black aluminum cone FEA optimized high power motor with vented pole piece Klippel DA optimized motor and suspension symmetry Oversized speaker terminals for large gauge speaker wire Neodymium tweeters are available in silk or aluminum Grill and trim ring included. Specifications: THIELE/SMALL PARAMETERS Sensitivity (dB): 88.3 Re(Ω): 3.6 Qts: 0.68 Fs (Hz): 65 Vas (L): 11.2 Xmax (mm): 2.4 Power (W): 75W RMS/150MAX Mounting Diameter: 5.73“ (95mm) Mounting Depth: 2.9“ (73.5mm) CROSSOVER Each HEX component system comes with a pair of model-specific adjustable crossovers, giving you attenuation and phase adjustments. The tweeter adjustment has settings for -2dB of attenuation, OdB, or +2dB of gain. There is also a “Phase switch” that you may use in different application/locations to correct for acoustical phase issues caused by placement of the drivers in the vehicle’s particular environment. REAR ACOUSTIC FILL Each HEX component crossover has a third set of outputs marked “RAF”. This stands for Rear Acoustic Fill. This output can be used to power and additional speakers off the same channel without affecting the impedance load on the source unit. The level of this output is pre-determined at -10dB of attenuation, for a REAL “rear fill” This creates a much more real stereo image and a bigger sound stage. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio H65S 340W Peak (170W RMS) 6.75" HEX Series 2-way 4-ohm Component Speaker System  Discover the unparalleled audio excellence of Diamond Audio's HEX Series Speakers, where high-end craftsmanship meets esoteric design. Revered for their crisp, extended highs and sparkling detail, these speakers offer pinpoint mid-bass accuracy, making them the ultimate choice for discerning audiophiles and professional musicians alike. The HEX Series embodies a rich heritage of innovation and quality, delivering an in-car listening experience that is nothing short of extraordinary. Utilizing exotic materials and cutting-edge technology, these speakers are engineered to perfection. The HEX Series Speakers are not just a product; they are a statement of high-end audio prowess. Experience the solid, die-cast aluminum alloy basket that houses the powerful components, ensuring durability and aesthetic appeal. The adjustable phase and tweeter attenuation allow you to tailor the sound to your preferences. Elevate your in-car audio experience with the Diamond Audio HEX Series Speakers. Feel the difference that superior craftsmanship and cutting-edge technology can make. Rediscover your favorite music with the HEX Series – the preferred choice of professional recording artists and musicians around the world. General Features: New 6.5” die-cast aluminum alloy basket 25mm neodymium tweeters  Hard anodized black aluminum cone FEA optimized high power motor with vented pole piece Klippel DA optimized motor and suspension symmetry Oversized speaker terminals for large gauge speaker wire Neodymium tweeters are available in silk or aluminum Grill and trim ring included. Specifications: THIELE/SMALL PARAMETERS Sensitivity (dB): 88.3 Re(Ω): 3.6 Qts: 0.68 Fs (Hz): 65 Vas (L): 11.2 Xmax (mm) : 2.4 Power (W): 75W RMS/150MAX Mounting Diameter: 5.73“ (95mm) Mounting Depth: 2.9“ (73.5mm) CROSSOVER Each HEX component system comes with a pair of model specific adjustable crossovers giving you attenuation and phase adjustments. The tweeter adjustment has settings for -2dB of attenuation, OdB or +2dB of gain. There is also a “Phase switch” that you may use in different application/locations to correct for acoustical phase issues caused by placement of the drivers in the vehicle’s particular environment. REAR ACOUSTIC FILL Each HEX component crossover has a third set of outputs marked “RAF”. This stands for Rear Acoustic Fill. This output can be used to power and additional speakers off the same channel without affecting the impedance load on the source unit. The level of this output is pre-determined at -10dB of attenuation, for a REAL “rear fill” This creates a much more real stereo image and a bigger sound stage. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio H600S 340W Peak (170W RMS) 6.75" HEX Series 2-way 4-ohm Component Speaker System  Discover the unparalleled audio excellence of Diamond Audio's HEX Series Speakers, where high-end craftsmanship meets esoteric design. Revered for their crisp, extended highs and sparkling detail, these speakers offer pinpoint mid-bass accuracy, making them the ultimate choice for discerning audiophiles and professional musicians alike. The HEX Series embodies a rich heritage of innovation and quality, delivering an in-car listening experience that is nothing short of extraordinary. Utilizing exotic materials and cutting-edge technology, these speakers are engineered to perfection. The HEX Series Speakers are not just a product; they are a statement of high-end audio prowess. Experience the solid, die-cast aluminum alloy basket that houses the powerful components, ensuring durability and aesthetic appeal. The adjustable phase and tweeter attenuation allow you to tailor the sound to your preferences. Elevate your in-car audio experience with the Diamond Audio HEX Series Speakers. Feel the difference that superior craftsmanship and cutting-edge technology can make. Rediscover your favorite music with the HEX Series – the preferred choice of professional recording artists and musicians around the world. General Features: 6-3/4 Diamond Audio HEX Series 2-way Component System Car Speakers Peak Power Handling: 340 watts per set / 170 watts each side RMS Power Handling: 170 watts per set / 85 watts each side Kevlar Composite hexagonal honeycomb cone material Rubber speaker surround 1" Silk Dome tweeters Ferrofluid cooled neodymium tweeter magnets Aluminum woofer dustcap Non-resonant cast aluminum frame Versatile crossover network Rear Acoustic Fill set of outputs on each networks Set-screw terminals for bare wires of up to 12 gauge Flush or surface tweeter mounting options Top-mount Depth: 2-15/16" Cutout Dimensions: 5-5/16" Impedance: 4 ohms Frequency Response: 42 - 24000 Hz Sensitivity: 87 dB CEA-2031 compliant: Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio H65SH HEX Series 6.5 “ 2-Way Shallow Component Set w/Silk Dome Tweeter Discover the unparalleled audio excellence of Diamond Audio's HEX Series Speakers, where high-end craftsmanship meets esoteric design. Revered for their crisp, extended highs and sparkling detail, these speakers offer pinpoint mid-bass accuracy, making them the ultimate choice for discerning audiophiles and professional musicians alike. The HEX Series embodies a rich heritage of innovation and quality, delivering an in-car listening experience that is nothing short of extraordinary. Utilizing exotic materials and cutting-edge technology, these speakers are engineered to perfection. The HEX Series Speakers are not just a product; they are a statement of high-end audio prowess. Experience the solid, die-cast aluminum alloy basket that houses the powerful components, ensuring durability and aesthetic appeal. The adjustable phase and tweeter attenuation allow you to tailor the sound to your preferences. Elevate your in-car audio experience with the Diamond Audio HEX Series Speakers. Feel the difference that superior craftsmanship and cutting-edge technology can make. Rediscover your favorite music with the HEX Series – the preferred choice of professional recording artists and musicians around the world. General Features: 6-1/2" Diamond Audio HEX Series 2-way Component System Car Speakers Peak Power Handling: 300 watts per set / 150 watts each side RMS Power Handling: 150 watts per set / 75 watts each side Reinforced Glass Fiber cone material 2" Silk Dome tweeters 1.5" voice coil FEA optimized high-power motor with vented pole piece Klippel DA optimized motor and suspension symmetry Oversized speaker terminals for large gauge speaker wire 2-part crossover terminal Solid, die-cast aluminum alloy basket Shallow-mount design Top-mount Depth: 1.3" Cutout Dimensions: 5.7" Impedance: 4 ohms Sensitivity: 89 dB Authorized Internet Dealer 1-year Manufacturer's Warranty The H65SH component system includes a pair of crossovers, providing attenuation and crossover adjustments. The tweeter adjustment has settings for -3dB of attenuation, 0dB, +3dB of gain. There is also a "LPF/FLAT" switch that you may use to correct issues caused by placement of the drivers in the vehicle. REAR ACOUSTIC FILL Each H65SH component crossover has a third set of outputs marked “RAF”. This stands for Rear Acoustic Fill. This output can be used to power and additional speakers off the same channel without affecting the impedance load on the source unit. The level of this output is pre-determined at -10dB of attenuation, for a REAL “rear fill” This creates a much more real stereo image and a bigger sound stage. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DES65C 240W Peak (120W RMS) 6.5" DES Series 2-way Component Speaker System  Elevate your in-car audio experience with Diamond Audio's Diamond Elite DES Series Speakers. Renowned for their high-end, esoteric design, these speakers are the culmination of refined engineering and meticulous attention to detail. Experience sonic perfection with pinpoint accuracy and superior sound quality that sets the Diamond Elite DES series apart. The Diamond Elite DES series builds on the legacy of its predecessors, incorporating further sonic improvements for a richer, more immersive listening experience. The unique fiber weave cone, supported by specially treated paper, ensures the signature Diamond Audio smooth mid-bass response. Upgraded yet subtle cosmetics make a statement without overwhelming your vehicle's aesthetics. Whether you're upgrading your OEM system or integrating into an amplified aftermarket setup, the Diamond Elite DES series speakers are the perfect choice. Their versatile design and superior performance make them an ideal addition to any audio system. Rediscover your music with Diamond Audio's Diamond Elite DES Series Coaxial Speakers. Experience the ultimate in-car listening experience with unmatched precision, clarity, and detail. Upgrade to Diamond Elite DES and hear the difference! General Features: 6-1/2" 2-way Component System Car Speakers Peak Power Handling: 240 watts per set / 120 watts each side RMS Power Handling: 120 watts per set / 60 watts each side Composite Foam Core Carbon Fiber cone material 1" Aluminum Dome tweeters Composite ABS frame design External 18dB/octave crossover with Rear Acoustic Fill (RAF) output Top-mount Depth: 2.26" Cutout Dimensions: 5.53" Frequency Response: 69 - 20,000 Hz Sensitivity: 87 dB Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Pairs Diamond Audio DES365C DES Series 6.5" 3-Way Component System w/Aluminum Dome Tweeter and Crossovers Elevate your in-car audio experience with Diamond Audio's Diamond Elite DES Series Speakers. Renowned for their high-end, esoteric design, these speakers are the culmination of refined engineering and meticulous attention to detail. Experience sonic perfection with pinpoint accuracy and superior sound quality that sets the Diamond Elite DES series apart. The Diamond Elite DES series builds on the legacy of its predecessors, incorporating further sonic improvements for a richer, more immersive listening experience. The unique fiber weave cone, supported by specially treated paper, ensures the signature Diamond Audio smooth mid-bass response. Upgraded yet subtle cosmetics make a statement without overwhelming your vehicle's aesthetics. Whether you're upgrading your OEM system or integrating into an amplified aftermarket setup, the Diamond Elite DES series speakers are the perfect choice. Their versatile design and superior performance make them an ideal addition to any audio system. Rediscover your music with Diamond Audio's Diamond Elite DES Series Coaxial Speakers. Experience the ultimate in-car listening experience with unmatched precision, clarity, and detail. Upgrade to Diamond Elite DES and hear the difference! General Features: 6-1/2" Diamond Audio Elite Series 3-way Component Speakers Car Speakers Peak Power Handling: 280 watts per set / 140 watts each side RMS Power Handling: 140 watts per set / 70 watts each side Composite foam core carbon fiber cone material Rubber speaker surround 1" Aluminum Dome Tweeters Composite ABS plastic frame design Top-mount Depth: 2.26" woofer / 1.56" midrange Cutout Dimensions: 5.53" woofer / 2.81" midrange Impedance: 4 ohms Frequency Response: 69 - 20000 Hz Sensitivity: 87 dB Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.