5 channel amplifiers (23)

Soundstream PN5.640D Picasso Nano Series Class D 5ch Amplifier General Features: When you get your first look at Picasso Nano Amplifiers, you will realize that size really does not matter too much at all. It is amazing and quite unbelievable that such a small piece of music-amplifying equipment can have such an amazing output. What’s more, in addition to fitting your bill ideally, it snugly fits into the biggest or smallest of cars, and the presence is known only when the music blasts non-stop unless your neighbor or co-traveler is complaining about the high decibels bombarding his or her ears.  You can install the amplifier under the front seat or the back seat, and you’ll still have enough space between the seat and the amplifier for ventilation. What’s more, the amplifier does not get heated up after a half-hour of continuous music playing at high volume. Thanks to the full-range crossovers the amplifier is equipped with, you sense no sound distortion even when the volume is turned up to the maximum. Other sport compact amplifiers use bizarre technologies with pseudo power supplies. Picasso Nanos use tried and tested MOSFET power supplies & tenacious Class D circuitry. General Features: Picasso Nano Series 5-Channel Class D Car Amplifier RMS Power Rating: 4 ohms: 60 watts x 4 channel + 200 watts RMS Power Rating: 2 ohms: 80 watts x 4 channel + 350 watts RMS Power Rating: 4 ohms, Bridged: 160 x 2 channel Max power output: 640 watts Full Pulse Width Modulated MOSFET power supply SMD technology on double-sided PCB Soft turn-on circuit Thermal and speaker short protection circuitry Dash mount remote bass level control included Variable Bass Boost (0 to +12 dB bass boost at 45 Hz) Sensitivity: 70 dB Speaker-level (high-level) inputs Variable low-pass filter (35-250 Hz, 24 dB/octave) Subsonic filter (12 dB at 10-50 Hz) 4 gauge power and ground wiring is required for installation Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier Dimensions: 4.75"W x 10.3"L x 2"H Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the PN5.640D package: PN5.640D owner's manual 5-channel amplifier One 40 amp ATO fuse (installed) Three 4" RCA input harnesses Three 7" Speaker level input harnesses Wired remote control 16-1/2' Remote control cable Four 5/8" Self-tapping screws Two 1/2" Self-tapping screws ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Pioneer GM-DX975 Limited Edition 5-Channel Class-D Car Amplifier with remote bass level control + Absolute KIT4 4 Gauge AMP KitGM-DX975 five-channel amplifier can power your entire car audio system, sending 75 watts RMS to each of your front and rear speakers while delivering up to 600 watts RMS to your sub. CTA-2006 compliant, this highly efficient Class D technology keeps this powerful amp running. This small chassis will be in many out-of-the-way spaces. The frequency response of the full-range channels stretches up to 50,000 Hz to support crystal-clear, Hi-Res playback. And this limited-edition amp uses high-grade electronic parts and gold-plated RCA connections to ensure maximum performance. Put your GM- DX975 into 3-channel mode to create a strong front soundstage with bass sending 200 watts RMS each to a set of high-performance components up front, plus 600 watts to a sub. The speaker-level inputs allow installing this amp in a factory system without RCA connections. The amplifier switches its input mode automatically when it detects the high-level signal, eliminating the need to run a turn-on lead to your receiver or fuse box. Built-in high and low pass filters let you adjust the sound for your vehicle's interior and a wired remote boost that lets you control the amount of bass boost from the front seat. General Features: Class 5-Channel Amplifier RMS Power Rating: 4 ohms: 75 watts x 4 channel + 350 watts RMS x 1 channel RMS Power Rating: 2 ohms: 100 watts x 4 channel + 600 watts RMS x 1 channel CTA-2006 Compliant Amplifier Wired remote bass level control included High-Quality Textured Aluminum Panel and Tough Frame 5-channel operation Gold-plated RCA Terminals HQ Sound Parts Frequency Response: 10 Hz to 50000 Hz Total Harmonic Distortion (THD): <0.05% Signal to Noise Ratio: > 94dB Variable low-pass filter: 40-240 Hz, 12 dB/octave Variable Bass Boost: 0 to 18 dB bass boost at 50 Hz Fuse Rating: 30A x 3 4 gauge power and ground wiring is recommended for installation Dimensions: "12-7/16"W x "2"H x "7-7/8"D Authorized Internet Dealer 1-year manufacture warranty What’s in the GM-DX975 package 5-Channel amplifier Three 30-amp ATO fuses (installed) Bass Boost Remote Control Bass Boost Remote Control Cable Speaker Level to RCA Input Adapter Installation Screws X 4 Wire Terminal Tool x 2 Owner's manual (English/ French) 1-Year Warranty Sheet ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio MICRO82U 2-Channel 500W RMS Full Range Class D Amplifier GENERAL INFORMATION Diamond Audio continues to break new dimensions by introducing the MICRO8U series of amplifiers for 2018. Following in the footsteps of the highly popular MICRO series amplifiers, the big-brother MICRO8U series packs more power and performance! 150W x 4CH + 350W @ 2Ω / 80W x 4CH + 200W @ 4Ω Input Sensitivity: 0.2-10 Volt Crossover Filter : Fixed 75Hz (HPF) 12dB Per Octave Slope ( CH1/CH2/CH3/CH4 ) 40-400Hz, 12dB Per Octave Slope ( CH5/CH6/CH7/CH8 ) Frequency Response: 10-33KHz Selectable REM / VOX / DC Turn On Modes Selectable 2CH / 5CH Input Modes Independent Front & Rear & Sub Inputs Dimensions: 10.45” x 4.02” x 1.4” (265.6 x 100.11 x 35.56 mm) Disconnected RCA Input & Speaker Output (Front & Rear). Harness Kits Included ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik RZ5-2500D RAZOR Series 5 Channel Amplifier + Absolute KIT-4 4 Gauge Amp Kit Power Acoustik RZ5-2500D RAZOR Series 5 Channel Amplifier We’re in a time where small is “in.” Smaller, more economical vehicles are more and more desirable. But that doesn’t mean you must sacrifice big power for your system. Razor amplifiers pack huge power into small chassis thanks to efficient Full-Range Class D topology and SMT circuitry. Complimented with every possible preamp adjustment, the Razor amplifiers leave nothing to be desired… Are you using an original or factory radio? No problem, these amplifiers are equipped with an Automatic Hi-Level Signal Sensing Turn-On. There is no need to run a remote wire turn on; this amplifier will automatically detect the sound signal and turn it on and off the amplifier. (Hi-Level Input only) General Features: Razor Series 5-Channel Car Amplifier Channel 1-4 RMS Power Rating: 4 ohms: 100 watts x 4 channel  Channel 1-4 RMS Power Rating: 2 ohms: 150 watts x 4 channel  Channel 1-4 RMS Power Rating: Bridged, 4 ohms: 300 watts x 2 channel Subwoofer Channel RMS Power Rating: 4 ohms: 400 watts x 1 channel  Subwoofer Channel RMS Power Rating: 2 ohms: 600 watts x 1 channel Max power output: 2500 watts x 1 chan. Wired remote bass level control included Variable Bass Boost (0 to +12 dB bass boost at 45 Hz) 5/4/3/2 or Mono channel operation Speaker-level (high-level) inputs Variable high-pass filter (35-250 Hz) Variable low-pass filter (35-250 Hz) 8 gauge power and ground wiring is required for installation Dimensions: 4-3/4"W x 12-1/2"L x 1-1/2"H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

Power Acoustik RZ5-2500D RAZOR Series 5 Channel Amplifier + Absolute KIT-8 8 Gauge Amp Kit Power Acoustik RZ5-2500D RAZOR Series 5 Channel Amplifier We’re in a time where small is “in.” Smaller, more economical vehicles are more and more desirable. But that doesn’t mean you must sacrifice big power for your system. Razor amplifiers pack huge power into small chassis thanks to efficient Full-Range Class D topology and SMT circuitry. Complimented with every possible preamp adjustment, the Razor amplifiers leave nothing to be desired… Are you using an original or factory radio? No problem, these amplifiers are equipped with an Automatic Hi-Level Signal Sensing Turn-On. There is no need to run a remote wire turn on; this amplifier will automatically detect the sound signal and turn it on and off the amplifier. (Hi-Level Input only) General Features: Razor Series 5-Channel Car Amplifier Channel 1-4 RMS Power Rating: 4 ohms: 100 watts x 4 channel  Channel 1-4 RMS Power Rating: 2 ohms: 150 watts x 4 channel  Channel 1-4 RMS Power Rating: Bridged, 4 ohms: 300 watts x 2 channel Subwoofer Channel RMS Power Rating: 4 ohms: 400 watts x 1 channel  Subwoofer Channel RMS Power Rating: 2 ohms: 600 watts x 1 channel Max power output: 2500 watts x 1 chan. Wired remote bass level control included Variable Bass Boost (0 to +12 dB bass boost at 45 Hz) 5/4/3/2 or Mono channel operation Speaker-level (high-level) inputs Variable high-pass filter (35-250 Hz) Variable low-pass filter (35-250 Hz) 8 gauge power and ground wiring is required for installation Dimensions: 4-3/4"W x 12-1/2"L x 1-1/2"H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

Power Acoustik RZ5-2500D RAZOR Series 5 Channel Amplifier We’re in a time where small is “in.” Smaller, more economical vehicles are more and more desirable. But that doesn’t mean you must sacrifice big power for your system. Razor amplifiers pack huge power into small chassis thanks to efficient Full-Range Class D topology and SMT circuitry. Complimented with every possible preamp adjustment, the Razor amplifiers leave nothing to be desired… Are you using an original or factory radio? No problem, these amplifiers are equipped with an Automatic Hi-Level Signal Sensing Turn-On. There is no need to run a remote wire turn on; this amplifier will automatically detect the sound signal and turn it on and off the amplifier. (Hi-Level Input only) General Features: Razor Series 5-Channel Car Amplifier Channel 1-4 RMS Power Rating: 4 ohms: 100 watts x 4 channel  Channel 1-4 RMS Power Rating: 2 ohms: 150 watts x 4 channel  Channel 1-4 RMS Power Rating: Bridged, 4 ohms: 300 watts x 2 channel Subwoofer Channel RMS Power Rating: 4 ohms: 400 watts x 1 channel  Subwoofer Channel RMS Power Rating: 2 ohms: 600 watts x 1 channel Max power output: 2500 watts x 1 chan. Wired remote bass level control included Variable Bass Boost (0 to +12 dB bass boost at 45 Hz) 5/4/3/2 or Mono channel operation Speaker-level (high-level) inputs Variable high-pass filter (35-250 Hz) Variable low-pass filter (35-250 Hz) 8 gauge power and ground wiring is required for installation Dimensions: 4-3/4"W x 12-1/2"L x 1-1/2"H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

Pioneer GM-DX975 Limited Edition 5-Channel Class-D Car Amplifier with remote bass level controlGM-DX975 five-channel amplifier can power your entire car audio system, sending 75 watts RMS to each of your front and rear speakers while delivering up to 600 watts RMS to your sub. CTA-2006 compliant, this highly efficient Class D technology keeps this powerful amp running. This small chassis will be in many out-of-the-way spaces. The frequency response of the full-range channels stretches up to 50,000 Hz to support crystal-clear, Hi-Res playback. And this limited-edition amp uses high-grade electronic parts and gold-plated RCA connections to ensure maximum performance. Put your GM- DX975 into 3-channel mode to create a strong front soundstage with bass sending 200 watts RMS each to a set of high-performance components up front, plus 600 watts to a sub. The speaker-level inputs allow installing this amp in a factory system without RCA connections. The amplifier switches its input mode automatically when it detects the high-level signal, eliminating the need to run a turn-on lead to your receiver or fuse box. Built-in high and low pass filters let you adjust the sound for your vehicle's interior and a wired remote boost that lets you control the amount of bass boost from the front seat. General Features: Class 5-Channel Amplifier RMS Power Rating: 4 ohms: 75 watts x 4 channel + 350 watts RMS x 1 channel RMS Power Rating: 2 ohms: 100 watts x 4 channel + 600 watts RMS x 1 channel CTA-2006 Compliant Amplifier Wired remote bass level control included High-Quality Textured Aluminum Panel and Tough Frame 5-channel operation Gold-plated RCA Terminals HQ Sound Parts Frequency Response: 10 Hz to 50000 Hz Total Harmonic Distortion (THD): <0.05% Signal to Noise Ratio: > 94dB Variable low-pass filter: 40-240 Hz, 12 dB/octave Variable Bass Boost: 0 to 18 dB bass boost at 50 Hz Fuse Rating: 30A x 3 4 gauge power and ground wiring is recommended for installation Dimensions: "12-7/16"W x "2"H x "7-7/8"D Authorized Internet Dealer 1-year manufacture warranty What’s in the GM-DX975 package 5-Channel amplifier Three 30-amp ATO fuses (installed) Bass Boost Remote Control Bass Boost Remote Control Cable Speaker Level to RCA Input Adapter Installation Screws X 4 Wire Terminal Tool x 2 Owner's manual (English/ French) 1-Year Warranty Sheet ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Crunch Ground Pounder PZ2-2030.5D POWERZONE 2000 Watt Amplifier 5-Channel Car Audio Amplifier POWER ZONE five-channel amplifier highlighted with aggressive heatsink elements feature high-level inputs utilizing SPEED-FET output devices and QTD Technology produces 2000 watts of power in a five-channel application. A Bass remote is included.  General Features: Weight 8 lbs Dimensions 19.25 × 7 × 3.25 in Compatible Vehicles Universal Amp Class Class D Amp Total Channels 5 Amp Max Power (watts) 2000 Amp Power @ 1 Ohm (ch x watts) 1 x 1000 Sub Only Amp Power @ 2 Ohms (ch x watts) 4 x 200 + 1 x 500 Amp Power @ 4 Ohms (ch x watts) 4 x 100 + 1 x 250 Amp Crossover Variable Electronic 12dB Per Octave Amp Variable High Pass Crossover 12dB per Octave 40Hz-400Hz Amp Variable Low Pass Crossover 12dB per Octave 40Hz-300Hz Amp Tone Control / Parametric EQ Built-in Bass Control Amp Bass Boost 0-12dB Amp Subsonic Filter 10-40Hz Amp Variable Voltage 0.2-6V Amp Frequency Response 10Hz-22kHz Amp Total Harmonic Distortion (THD) < 0.1% Amp Speaker Level Audio Inputs Yes Pre-amp Audio Outputs Full Range, RCA Amp Power Terminal 12v/GND 4 AWG Amp Speaker Terminal Wire Gauge 12 AWG Amp Fusing External 100A ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

AUTOTEK MM-1525.5D 1500 Watt Compact 5 Channel Amplifier   1,500-Watt Max Power 1 Channel X 800 Watts Sub Only At 1 Ohm 4 Channels X 150 Watts + 1 Channel X 400 Watts At 2 Ohms 4 Channels X 150 Watts + 1 Channel X 200 Watts At 4 Ohms Aftermarket Class D Amp Replaces Or Supplements Vehicle’S Existing Oem Amp To Power Car’S Stereo Speakers Can Run In 4-Channel Or Mono Mode Drives Additional Power With A Small Footprint Frequency Response: 10 Hz To 22 Khz Total Harmonic Distortion (Thd) Less Than 0.1% Road Worthy Tcid (Twin Coil Isolation Design) And Pro-Fi High Speed Mosfets Bring Extreme Power With High Sound Quality And Minimum Distortion Levels Heavy-Duty Aluminum Alloy Heatsink With Illuminated Logo Adds A Vibrant Display And Showcase For Every Car Audio Installation Nickel-Plated Brass Connection With Hex Set Screw Terminals For Secure Connection While Resisting Corrosion Angled Allen Key Connectors Provide Easy Access For Hand Tools For Quick And Secure Connections Maximum Low Voltage Signal From Source Unit Comes Into Amp Through Low Voltage Circuit Which Delivers Minimal Distortion Through Amplification Process Rca Preamp Audio Outputs And Speaker Level Audio Inputs Rca Inputs And Outputs Provide Highest Sound Quality Connection Full-Range Signal Pass Through Output Allows Additional Amps To Be Run From The "Output" Rca Connections Which Minimize The Need For Additional Cables Running The Length Of The Vehicle, Minimizing Noise Onboard Variable Electronic Crossover 12 Db Per Octave Built-In Bass Control Amp Variable Low Pass: 40 Hz To 300 Hz Amp Bass Boost 0 Db To 12 Db Amp Subsonic Filter 10 Hz To 40 Hz High Energy Pulse Width Modulated Power Supply Delivers Power With Minimal Impact On Electrical System Monitor-Overload And Speaker-Short Protection With Lighted Indicators On Amp End Panel Power Terminal 12-Volt/Gnd: 4 Awg Speaker Terminal Wire Gauge: 12 Awg Amp Fusing: External 100 Amps Dimensions: 18 In. X 7 In. X 3.25 In. Includes Wired Bass Remote, Mounting Hardware And Manual  WARNING - California Proposition 65  

Cerwin Vega CVP2500.5D 5-Channel 2500 Watts Bridgeable Class-D Amplifier + 5 Channels 4 Gauge Amp Kit The Cerwin-Vega Mobile Performance Series of products makes owning a Cerwin-Vega Mobile sound system very affordable for those that are budget-conscious. And with this 2,500 Watt Max 5 Channel Class D Amp, you can enjoy the LOUD sound experience at the right price and with the right power! Cerwin-Vega Mobile amplifiers are powerful enough to drive even the most inefficient speakers and bring out their full performance capabilities to dramatic levels of clean, distortion-free sound. All Cerwin-Vega Mobile amplifiers are tested and validated by an outside third-party audio lab that measures and analyzes audio electronics to ensure precise power measurements and follows standards and practices set forth by CTA (Consumer Technology Association). General Features: CVP Series 5-Channel Amplifier Class-D Full-Range Monoblock Amplifier 150 watts x 4 channel + 500 Watts @ 2 Ohms RMS Power 100 watts x 4 channel + 350 Watts @ 4 Ohms RMS Power 300 watts x 2 channel + 500 Watts @ 4 Ohms RMS Power Bridged Class-D Circuitry 2-Ohm Stereo, 4-Ohm Bridged Full Range Operation Direct Short, Thermal, & Overload Circuits Protect Amplifier Variable 12dB High, Low, & Subsonic Crossovers Dimensions: 14.97"W x 9.38"L x 2.25"H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Alpine S-A55V S-Series 5-Channel Class D Amplifier 540W RMS +Absolute 4 Gauge Amp Kit The Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers. S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. General Features: 5-channel Class D Amplifier Power Output: 40 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms 60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms 120 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms CTA-2006 compliant Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section Variable low-pass filter (50-400 Hz, 24 dB/octave) on a subchannel Variable bass boost (0-12 dB at 50 Hz) on a subchannel Optional RUX-KNOB.2 wired remote level control for a subchannel Preamp and speaker-level inputs speaker wire to RCA adapter required for speaker-level input Wiring and hardware not included with amplifier 4-gauge power and ground leads recommended Fuse rating: 30A x 2 Dimensions: 11-1/4" W x 2-1/4" H x 8" D Authorized Dealer 1-year Manufacturer's Warranty What's in the box: 5-Channel amplifier Two 30-amp ATO fuses (installed) Four 3/4" Screws 2mm Allen wrench Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Alpine S-A55V owner's manual Absolute KIT4OR Complete PRO Marine Auto Car RV 4 Gauge 2000 Watts Amplifier Complete Installation Amp Kit Power Wiring with Orange Accent Color Scheme Installing a car amplifier is already enough of a job without having to worry about where to find the right wire and installation accessories. What you might not know is that there are some gimmicks being played by some companies and you could end up getting ripped off! Today, I would recommend KIT4 for all DIY and Installer. This is a wiring kit with an easy-to-install AGU fuse holder and some seriously good wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels and works great, and it is much better than the typical 18 AWG wire most kits would include. General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provide optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of 4 AWG high current power cable 3 ft. of 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire 6 ft. of split loom tubing 1 Gold plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Rockford Fosgate T1000X5ad Power 1,000 Watt Class-ad 5-Channel Amplifier The T1000X5ad Element Ready multi-channel amplifier is a 1000 watt RMS unit built on our proprietary Class ad platform designed to deliver unprecidented sound quality with superior power efficiency. Combined with our Constant Power technology, this amplifier can easily exceed its rated power by up to 25% additional output per channel. General Features Our compact (1.6” x 4.3” x 12.0”) Power T1000X5ad all in one 5-channel amplifier requires minimal space but delivers a massive 1000 Watts of POWER Our proprietary "Constant Power" amplifiers are the most powerful amplifiers on the market and deliver up to 25% more power (Watts) across all impedance loads (RMS Power Output: 100 Watts x 4 @ 4-Ohm + 400 x 1 @ 4-Ohm or 100 Watts x 4 @ 2-Ohm + 600 x 1 @ 2-Ohm or N/A + 600 Watts x 1 @ 1-Ohm 200 Watts x 2 @ 4-Ohms Bridged + N/A) Built on Rockford Fosgate’s proprietary Class-AD technology + Class BD (Sub), featuring Constant Power to produce the same output at both 4-Ohm and 2-Ohm impedances, making it perfect for hybrid, electric, small cars, trucks, motorcycles, and side-by-side UTVs High-level auto turn-on, CLEAN circuit input/output clip detection, On-board Punch EQ with +18dB boost @ 45Hz and 12dB/octave Butterworth crossover make T1000X5ad an impressive POWER house Famous Rockford Fosgate build quality insures that the T1000X5ad will handle everything you throw at it! Full 2-year parts and labor warranty when purchased from an authorized Rockford Fosgate reseller ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate Punch P1000X5 5-channel car amplifier — 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer. The P1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels, and run subwoofer(s) off the 5th channel! Known worldwide for brute power, this amplifier offers a higher level of efficiency along with tri-stage protection that covers thermal, over-current, and short circuits. General Features: 5-channel car amplifier 75 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms 125 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms 250 watts RMS x 2 bridged at 4 ohms + 500 watts RMS at 1 ohm CEA-2006 compliant variable high- and low-pass filters (50-250 Hz, 12 dB/octave) variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz) switchable subsonic filter (28 Hz, 12 dB/octave) on subwoofer channel L.E.A.N. gain setup system includes test tone CD test tones are also available as MP3 download from Amazon on Demand, Rhapsody, Google Play, and Spotify, labeled "3sixty.3 setup disc" (Punch amps and the 3sixty.3 use the same test tone tracks for setup) Class-BD amplifier design frequency response: 20-20K Hz Dynamic Thermal Management and MEHSA MOSFET cooling systems MOSFET power and output stages preamp and speaker-level inputs (speaker-level inputs require a speaker wire to RCA adapter) signal-sensing turn-on with speaker-level inputs eliminate the need for remote turn-on lead optional PLC2 wired remote level control with clip light available 4-gauge power and ground leads and a 150-amp fuse recommended — wiring and hardware not included with amplifier no onboard fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended. 15-1/8"W x 2-7/16"H x 8-13/16"D What is in the box: 5-Channel amplifier Four 1-1/2" Self-tapping screws 5mm Allen wrench Quick setup instructions Certificate of Performance Setup/Manual disc Rockford Fosgate Punch P1000X5 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Rockford Fosgate Punch P1000X5 5-channel car amplifier — 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer. The P1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels, and run subwoofer(s) off the 5th channel! Known worldwide for brute power, this amplifier offers a higher level of efficiency along with tri-stage protection that covers thermal, over-current, and short circuits. General Features: 5-channel car amplifier 75 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms 125 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms 250 watts RMS x 2 bridged at 4 ohms + 500 watts RMS at 1 ohm CEA-2006 compliant variable high- and low-pass filters (50-250 Hz, 12 dB/octave) variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz) switchable subsonic filter (28 Hz, 12 dB/octave) on subwoofer channel L.E.A.N. gain setup system includes test tone CD test tones are also available as MP3 download from Amazon on Demand, Rhapsody, Google Play, and Spotify, labeled "3sixty.3 setup disc" (Punch amps and the 3sixty.3 use the same test tone tracks for setup) Class-BD amplifier design frequency response: 20-20K Hz Dynamic Thermal Management and MEHSA MOSFET cooling systems MOSFET power and output stages preamp and speaker-level inputs (speaker-level inputs require a speaker wire to RCA adapter) signal-sensing turn-on with speaker-level inputs eliminate the need for remote turn-on lead optional PLC2 wired remote level control with clip light available 4-gauge power and ground leads and a 150-amp fuse recommended — wiring and hardware not included with amplifier no onboard fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended. 15-1/8"W x 2-7/16"H x 8-13/16"D What is in the box: 5-Channel amplifier Four 1-1/2" Self-tapping screws 5mm Allen wrench Quick setup instructions Certificate of Performance Setup/Manual disc Rockford Fosgate Punch P1000X5 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov