Quick Bass Solutions (22)

Cerwin-Vega CVM1 Digital Bass Reconstruction Processor, Epicenter Enhancer, Equalizer The CVM1 is the most potent bass component. This device has several different bass output selections—the Cerwin-Vega Mobile CVM1 for your car audio system. The Cerwin Vega Mobile CVM1 Digital Bass Processor is designed and engineered to reproduce extreme bass in your vehicle! The authorized Cerwin-Vega Mobile dealers can help guide you with various installation applications and technical information to customize your sound system according to your listening preference. It is highly recommended that you have your new CVM1 installed by an authorized Cerwin-Vega Mobile dealer to ensure you receive the ultimate listening experience! General Features: Vega Series Digital Car Audio Bass Enhancer 15V RMS Maximum Input Level 13.2V Peak Maximum Output Level Bass Driver Bass Equalization Circuit Dash Mount Remote Control Bass Maximizer Indicator PFM Subsonic Filter Switch Bass Output Control Frequency Response: 10 – 30 KHz Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin-Vega CVM1 Digital Bass Reconstruction Processor, Epicenter Enhancer, Equalizer The CVM1 is the most potent bass component. This device has several different bass output selections—the Cerwin-Vega Mobile CVM1 for your car audio system. The Cerwin Vega Mobile CVM1 Digital Bass Processor is designed and engineered to reproduce extreme bass in your vehicle! The authorized Cerwin-Vega Mobile dealers can help guide you with various installation applications and technical information to customize your sound system according to your listening preference. It is highly recommended that you have your new CVM1 installed by an authorized Cerwin-Vega Mobile dealer to ensure you receive the ultimate listening experience! General Features: Vega Series Digital Car Audio Bass Enhancer 15V RMS Maximum Input Level 13.2V Peak Maximum Output Level Bass Driver Bass Equalization Circuit Dash Mount Remote Control Bass Maximizer Indicator PFM Subsonic Filter Switch Bass Output Control Frequency Response: 10 – 30KHz Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Traynor TC410NEO 800 Watt Bass Cab W/4-10" Neo Speakers & Horn Traynor NEO Cabinets deliver maximum performance and portability. High quality lightweight neodymium magnet drivers and all-new weight-reduced cabinet designs ensure Traynor NEO bass cabinets deliver unrivaled definition and low-end punch in as feather-weight an enclosure as is possible.Innovative bracing guarantees rock solid performance and unmatched long-term reliability. High quality horns with L-Pad volume control allows the user to tailor the cabinet response to their ideal tone. Rugged Nubtex covering, removable casters and all metal handles ensure Traynor NEO cabinets are rugged enough for even the most demanding tour schedule. Item details: Power:    800W @ 8 Ohms Speakers:    4x10-inch Eminence Neodymium Speakers                   40 Watt 1-inch Compression Driver & L-Pad Weight:    Weight (lbs / kg): 59.1 / 26.8 Size:    Dimensions (DWH, inches): 18.5 x 24.5 x 28 Dimensions (DWH, cm): 47 x 62.2 x 72.1 Inputs:    Inputs: 2 Speakon, 2 1/4-inch Outputs:    none. EQ / Controls:    Horn volume control on back panel. Features:    Metal Corners, Detachable Casters, Metal flip handles, 16 gauge punched           metal grille Other Specs:   Frequency Response (Hz +/-3dB): 45 - 18k Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Traynor TC115NEO 1 x 15-inch Neodymium Bass Extension Cabinet – 400 Watts The Traynor TC115NEO Cabinet deliver maximum performance and portability. High quality lightweight neodymium magnet drivers and all-new weight-reduced cabinet designs ensure Traynor NEO bass cabinet deliver unrivaled definition and low-end punch in as feather-weight an enclosure as is possible. Innovative bracing guarantees rock solid performance and unmatched long-term reliability. Rugged Nubtex covering, removable casters and metal handles ensure the Traynor TC115NEO cabinet is rugged enough for even the most demanding tour schedule. General Features: 400 Watt extension cabinet 8 ohm impedance 1×15-inch Eminence Neodymium speaker Solid light weight plywood cabinet construction Removable heavy duty casters Speakon & 1/4-inch input jacks Rugged Nubtex cabinet covering Made in Canada Specifications: Cabinet Program Power (Watts) 400 Cabinet Impedance (Ohms) 8 Speaker Configuration – LF 1×15 Neodymium Frequency Response (Hz +/-3dB) 45 – 5k Inputs 2 x Speakon, 2 x 1/4-inch Dimensions (DWH, inches) 18.5 x 24.5 x 18.25 Dimensions (DWH, cm) 47 x 62.2 x 46.4 Weight (lbs / kg) 39.2 / 17.8 **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Traynor TC1510 2 x 10-inch / 1 x 15-inch Bass Extension Cabinet – 600 Watts One of the most unique bass cabinets in the Traynor line, the TC1510 is a powerful all-in-one box that offers one of the most popular system configurations in one compact cost effective solution. Delivering a 2 10 and 1 15 + horn system in one easy to move package makes the TC1510 ideal for the player who knows premium sound and always uses that configuration on every stage. Solid plywood cabinet construction, all-metal grille, heavy-duty removable casters and metal flip handles ensure unmatched reliability over the long haul. An L-pad on the 1-inch horn ensures you can tailor your sound with as much or as little high-end horn as required including a full-off position when a traditional bass tone is preferred. General Features: Solid plywood cabinet construction Heavy duty Nubtex covering 16 gauge punched metal grille All-metal corners and flip handles 1-inch Horn w/ Pad Made in Canada Specifications: Cabinet Program Power (Watts) 600 Cabinet Impedance (Ohms) 4 Speaker Configuration – LF 2 × 10-inch / 1 x 15-inch Speaker Configuration – HF 1-inch with L-Pad Frequency Response (Hz +/-3dB) 45 – 15k Inputs 2 x Speakon, 2 x 1/4-inch Dimensions (DWH, inches) 15.5 x 22.5 x 32.5 Dimensions (DWH, cm) 39.4 x 57 x 83 Weight (lbs / kg) 85 / 38.6 **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Traynor TC810 8 x 10-inch Bass Extension Cabinet - 1600 Watts Not for the weak hearted, the biggest bass cabinet Traynor offers is the 1600-Watt TC810. Built to be seen and heard, the TC810 workhorse of the line is for the player who needs to be able to deliver punishing sound pressure levels night after night. Solid plywood cabinet construction, all-metal grille, all-metal handles, skid rails and wheels ensure unmatched reliability over the long haul. Innovative user switchable input configuration on the jack-plate allows the TC810 to act as two 8-ohm 410 cabinets for bi-amp operation, or as a single 4-ohm 810 behemoth capable of handling up to 1600 watts of pure bass. General Features: Cabinet program power (Watts): 1600 / 800 (x2) Switchable dual 8 Ohm or mono 4 Ohm operation Solid plywood cabinet construction 16 gauge punched metal grille Metal bar handles Tiltback Wheels & skid rails Made in Canada Specifications: Cabinet Program Power (Watts) 1600 / 800 (x2) Cabinet Impedance (Ohms) 4 / 8 (x2) Speaker Configuration – LF 8×10 Frequency Response (Hz +/-3dB) 40 – 7k Inputs 2 Speakon / 2 x 1/4-inch Dimensions (DWH, inches) 16 x 26.25 x 49 Dimensions (DWH, cm) 40.6 x 66.7 x 124.5 Weight (lbs / kg) 156.5 / 71 **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Traynor TC410-4 800 Watt 4x10 Bass Cabinet - 4 ohm Configuration Now available in a 4-Ohm version, Traynor's top-selling TC410-4 delivers best-of-all-worlds performance for virtually any bass sound. Solid bottom end comes from four long excursion 10-inch drivers while crisp highs from the conical horn can be precisely control-regulated for any balance you prefer. This means the TC410 can cover any playing application. And for a wall-of-bass rig, dual TC410s provide a 2-piece, 1600-Watt 810 stack that can rock the roof. Or optionally the TC410 can be combined with a TC115 for a classic 4x10/1x15 stack.Made in Canada with a 2-year North American, even-if-you-blow-it warranty on all components and that covers cabinet integrity for a full ten years, the TC410's 11-ply construction, an all-metal grille, removable heavy-duty casters and all-metal flip handles ensure unmatched reliability over the long haul.General Features: - Solid plywood Cabinet Construction- Heavy Duty Nubtex Covering- All Metal Grilles- All-Metal Flip Handles- Removable Casters- 1-inch Horn w/ PadSpecifications: Enclosure Type: 2-way bass reflex Program Power (Watts): 800 Impedance (Ohms): 4 Frequency Response (Hz +/-3dB): 45 - 18k Speakers: 4x10-inch 200Wpgm, 32 Ohms each Horn Driver: 1-inch 40Wpgm, 8 Ohms Horn: 60 x 60 degree, conical Horn level Control: L-Pad Inputs: 2 Speakon, 2 1/4-inch, all in parallel Cabinet Construction: 15mm, 11-ply Russian birch Hardware: Metal Corners, Metal flip handles, 16-gauge punched metal grille Dimensions (DWH, inches): 18.5 x 24 x 28 Dimensions (DWH, cm): 47 x 61 x 71.1 Weight (lbs / kg): 90.4 / 41 Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Traynor TC210 2 x 10-inch Bass Extension Cabinet – 400 Watts Compact, versatile and punchy, the TC210 can stand alone on small gigs, or become incorporated into a larger rig on louder stages when combined with the TC115 for a compact 210 / 115 stack. Solid plywood cabinet construction, all-metal grille, metal flip handles ensure unmatched reliability over the long haul while an L-pad on the 1-inch horn ensures you can tailor your sound with as much or as little high end horn as required including a full-off position for a traditional 210 tone. General Features: Solid plywood cabinet construction Heavy duty Nubtex covering 16 gauge punched metal grille All-metal corners and flip handles 1-inch Horn w/ Pad Made in Canada Specifications: Cabinet Program Power (Watts) 400 Cabinet Impedance (Ohms) 8 Speaker Configuration – LF 2 × 10 Speaker Configuration – HF 1-inch with L-Pad Frequency Response (Hz +/-3dB) 45 – 18k Inputs 2 x Speakon, 2 x 1/4-inch Dimensions (DWH, inches) 18.5 x 24 x 16 Dimensions (DWH, cm) 47 x 61 x 40.4 Weight (lbs / kg) 54.2 / 24.6 **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Traynor YBA300 300 Watt Tube Bass Head The all-tube Traynor YBA300 300-watt bass head has been designed from the ground up to be the ultimate high-power head for the working musician. Built for unmatched reliability in real world heavy-use touring environments, the designers of the YBA300 understand how important it is to make sure your amp is ready for action every night. Highly effective and straightforward tube bias adjust with clear and concise LED display ensure any player can easily adjust pairs of the YBA300s power tubes without fear. LED indicators on the rear of the amp show proper tube function and status. In rare cases where a tube may fail, the YBA300 will lock out the problem tube and its partner, allowing the amp to finish the show on the remaining active tubes. LED display clearly shows which tube needs service. The stock YBA300 ships with twelve hand-selected and tested 6L6 power tubes, delivering a truly classic hi-fi smooth tube tone. For players looking for a more aggressive bass sound, the stock 6L6 tubes can be easily changed to any high quality EL34 tube set and be re-biased in the field, making the YBA300 essentially two amps in one versatile chassis. General Features: 300 Watt All-Tube Bass Amp Delivers Maximum Power at 2 or 4 ohms Comes Stock with 3 x 12AX7, 1 x 12AU7 and 12 x 6L6 Tubes 6L6 Power Tubes Can Be Swapped for EL34 Tubes for Different Amp Character Individual bias adjust with indicator LEDs for Output Tubes Tube Lockout for each Pair of Output Tubes removes damaged tubes from signal path allowing amp to continue operation in emergencies Gain, Bass, Sweep-Mid, Treble and Master Controls Deep, Bright, Resonance Tone Shaping Controls Pre/Post EQ DI Output, Effects loop, Tuner Output 1/4-inch and Speakon™ Output Connectors Made In Canada Specifications: Power @ min. impedance (Watts) 300 @ 2/4 ohms switchable / 250W into 8 ohms Minimum Impedance (Ohms) 2 Frequency Response (Hz +/-3dB) 30 – 16,000 Hum and Noise (dB) -90db Channel 1 – Inputs 1/4-inch (Passive 0 dB, Active -6 dB) Channel 1 – Controls Gain Master Volume Control Yes Main Tone Controls Treble, Mid, Frequency, Bass Input Sensitivity (mV) 20 Master Outputs Pre-amp out (Pre Master) Line Out (type / configuration) XLR Balanced (Pre/Post, Grnd Lift) Line Out Sensitivity (Vrms) 200 Effects Loop / Location Pre-amp out, Power Amp in, Loop Thru Effects Return Sensitivity (Vrms) 1 LED Indicators Power/Standby/Bias External speaker output / location 2 x 1/4inch, 1 Speakon (Rear) Other Features Bright, Deep & Resonance Switches Impedance Selector (2/4 ohms) Tubes 3x12AX7, 1x12AU7, 12x6L6 Tuner Output Yes Dimensions (DWH, inches) 11.5 x 24 x 10 Dimensions (DWH, cm) 29 x 61 x 25.4 Weight (lbs / kg) 51 / 23 **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Traynor YBA200-2 200 Watt Tube Bass Head The North American made Traynor YBA200-2 200-watt all tube bass head is built to deliver a solid foundation for any player looking for a great rock, blues or country bass tone. Designed for maximum dependability under even the most grueling playing conditions, the fan cooled Traynor YBA200-2 uses solid plywood box construction, all-metal handles, nickel corners and an all-metal chassis for unmatched long-term reliability. Four KT88 tube in the power stage, two 12AX7As and one 12AU7 in the preamp to deliver the warmth and tone you would expect only from a great tube amp. Basic controls include input gain, master volume and a simple but effective three-band master EQ. Innovative tone shaping features like Scoop, Range, and Resonance controls ensure that any tone can easily be dialed in with a YBA200-2, making it one of the most effective and versatile tube heads in its class. The Scoop control sweeps from a flat frequency response to a mid-frequency dip at 400 Hz and can be completely bypassed from a separate front panel on/off switch. The Range control shifts the overall shape and general tonal characteristic of the master EQ section of the amp while the Resonance knob controls the damping factor of the amplifiers output stage, allowing the player to take full advantage of the tone of his loudspeaker enclosure. The use of toroidal transformers reduces the overall weight of the YBA200-2 making it much lighter than any other high-power all-tube bass amp in this class. The YBA200-2 has high and low level 1/4-inch inputs, a 1/4-inch tuner output with a switchable mute function that mutes the entire rig and kills the DI output when tuning. The front panel mounted XLR D.I. output has a one-touch ground lift, a 20dB pad and is switchable pre or post EQ. General Features: 200 watt all-tube bass amplifier 4x KT88 power tubes, 2x 12AX7A and 1x 12AU7 preamp tubes 3-band Master EQ with Range Control Innovative Scoop and Resonance Controls 1/4-inch Tuner Output with System Mute Switch Switchable Pre/Post XLR D.I. Out with Ground Lift & 20dB Pad Made in Canada Specifications: Power @ min. impedance (Watts) 200 @ 4 or 8 (switchable) Minimum Impedance (Ohms) 2 Burst Power 250 Frequency Response (Hz +/-3dB) 30 – 16,000 Hum and Noise (dB) -90dB Channel 1 – Inputs 2 x 1/4inch @ 0dB & -6dB Channel 1 – Controls Gain Master Volume Control Yes Main Tone Controls Treble, Mid, Range, Mid frequency, Bass, Scoop, Resonance Line Out (type / configuration) XLR Balanced Select Pre/Post, Grnd Lift Line Out Sensitivity (Vrms) 1V Other Features Mute, Bright, Line Out Pre/Post-EQ Select Switches Tubes 12AX7 x 2, 12AU7 x 1, KT88 x 4 Tuner Output Yes Dimensions (DWH, inches) 11.5 x 22.5 x 9.5 Dimensions (DWH, cm) 29 x 57 x 24 Weight (lbs / kg) 44/20 **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Traynor YBA100 100 Watt Tube Bass Head The YBA series signature is its versatility. The stock YBA100 ships with 4 hand-selected and tested 6L6 power tubes, delivering a classic smooth tube tone. For players looking for a more aggressive bass sound, the stock 6L6 tubes can be easily changed to any high quality EL34 tube set and be re-biased in the field, making the YBA100 essentially two amps in one chassis. The all-tube Traynor YBA100 100-watt bass head has been designed to be the ultimate tube head for the working musician. LED indicators on the rear of the amp show proper tube function and status. In rare cases where a tube may fail, the YBA100 will lock out the problem tube and its partner, allowing the amp to finish the show on the remaining active tubes. Smaller, portable and accessible, the YBA 100 is a lunch-box style amp, lighter than most 100 watt tube amps on the market. The YBA100 is the ideal amp for todays bassist, providing the ideal amount of output for tighter stage plots. General Features: Three 12AX7 pre-amp tubes, and 6L6/EL34 power output tubes (X 4) 3-Band tone controls with frequency selectable Mid control Deep, Bright, and Resonance tone switches True balanced D.I./Line output. Selectable Pre-EQ or Post-EQ and Ground Lift Effects Send and Return jacks (Pre-Amp Out and Power Amp Input) Tuner Out jack Individual tube Bias Adjust, Indicator LEDs, and lockout so you will always know the status of your tubes Made in Canada Specifications: Power @ min. impedance (Watts) 100 @ 4/8 ohms – Switchable Minimum Impedance (Ohms) 4 Frequency Response (Hz +/-3dB) 30 – 16,000 Inputs 1 Channel 1 – Inputs 1/4-inch (Passive 0 dB, Active -6 dB) Channel 1 – Controls Gain, Bass, Mid, Frequency, Treble Master Volume Control Yes Main Tone Controls Bright, Deep, Resonance Line Out (type / configuration) configuration) XLR Balanced Switchable Pre-EQ/Post-EQ Effects Loop / Location Yes / Rear of Unit LED Indicators Protect, Power/Standby Protection Clip, Thermal, Overcurrent, Clip External speaker output / location 2 x 1/4-inch, 1 x Speakon / Rear of Unit Other Features Standby Tubes 3 x 12AX7, 4 x 6L6 Tuner Output Yes Dimensions (DWH, inches) 8.5 x 18.5 x 8 Dimensions (DWH, cm) 21.5 x 47 x 20 Weight (lbs / kg) 22 / 10 **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Traynor SB500H 500 Watt Micro Bass Head Delivering a full 500 Watts at 4 ohms, the ultra compact and lightweight Traynor SB500H is the ideal professional bass head for the musician on the move. Loaded with essential features including Active and Passive level instrument inputs XLR DI output, a versatile four band EQ with an additional low frequency expander, the SB500H allows virtually any tone to be dialed in quickly and easily. The all-metal chassis with front mounted handles to protect the knobs and jacks ensures the SB500H is fully road ready. A rear mounted in-line effects loop, selectable Pre/Post EQ XLR DI output, front mounted tuner out (with mute) and heavy duty Speakon speaker outs are included. General Features: 500-watt ultra compact and lightweight bass head Versatile 4-band EQ with additional Low Frequency Expander All-metal chassis Active and Passive inputs Selectable Pre / Post EQ XLR DI output Rear mounted in-line Effects Loop Speakon™ outputs Made in Canada Specifications: Power @ min. impedance (Watts) 500 watts Minimum Impedance (Ohms) 4 Burst Power 600 watts Inputs Passive 0 dB, Active -6 dB Additional Inputs 1/4-inch Aux Input Channel 1 – Controls Gain, Bass, Low Mid, High Mid, Treble, Low Expander, Master Volume Line Out (type / configuration) Balanced Pre/Post Line Out W/ Ground Lift Switch Line Out Sensitivity (Vrms) 1 Effects Loop / Location Yes – 1/4-inch Send and Return / Rear LED Indicators Blue – Power / Red – Protect/Mute Protection Clip, Thermal, Overcurrent External speaker output / location Speakon™ (x2 – Rear) Other Features Headphone Out /Mute / Tuner Out Tuner Output Yes Dimensions (DWH, inches) 9.5 x 12 x 2.5 Dimensions (DWH, cm) 22 x 30 x 6.5 Weight (lbs / kg) 4.0 / 1.8 **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.