Peavey (97)

(2) Peavey Pvi2 White Microphone w/Mic Clip & Carrying Bag + (2) Mr. Dj Microphone Stand Series + (2) 20 Feet XLR to XLR White Cable Package: (2) PVi2 White Microphone + (2) Mr Dj Microphone Stand Series + (2) XLR Cables PVi2W: White Dynamic Unidirectional Cardioid Microphone With Extended High-Frequency Response 20 Feet XLR to XLR White Cable, Tapered Mic Clip With Stand Adapter, and Carrying Bag Included High-Quality Shock Mount & Easy Grip On/Off Switch Mr. Dj Microphone Stand: Features A Non-Detachable 31" Boom Arm & Non-Slip Rubber Feet Strong, Tip-Resistant Tripod base ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

  (2) PVXP12 DSP 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj Speaker Stands+XLR Cable Peavey PVX 12 DSP 830W 12-inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 12 DSP loudspeaker provides the sound reinforcement you need. Pumping a muscular 830 watts through a powerful 12" woofer and 1.4" titanium compression driver, the PVXp 12 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 12 DSP's durability, allowing it to withstand the routine wear easily comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 12 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. Peavey built the PVXp 12 DSP to be as lightweight as possible without sacrificing durability. Moreover, the PVXp 12 DSP features several molded-in cabinet handles for extra grab-and-go convenience. When it comes to flying PVXp 12 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVX 12 DSP speakers are so lightweight you may be tempted to throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 12 DSP will probably shrug off the abuse without a problem. Peavey built their PVXp 12 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or need a good speaker for speech sound reinforcement, your Peavey PVXp 12 DSP will do the trick. It packs 830 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 12 DSPs can easily cover audiences in the hundreds. Additionally, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. The PVXp 12 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP. Thanks to its state-of-the-art design, it's easy to get the most out of your Peavey PVXp 12 DSP. Built-in DSP tailors your sound to just about any situation you will likely encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 12 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVX 12 DSP Features: 12" heavy-duty woofer delivers chest-thumping low-end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth, high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 10 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts An extra angled section on the right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 12" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 51Hz-20kHz Frequency Response: 60Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 24.5" Width: 16.1" Depth: 15" Weight: 43 lbs. Manufacturer Part Number: 03616450 ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

(2) PVXP12 DSP 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj XLR Cable Peavey PVXp 12 DSP 830W 12-inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 12 DSP loudspeaker provides the sound reinforcement you need. Pumping a muscular 830 watts through a powerful 12" woofer and 1.4" titanium compression driver, the PVXp 12 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 12 DSP's durability, allowing it to easily withstand the routine wear that comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 12 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. Peavey built the PVXp 12 DSP to be as lightweight as possible without sacrificing durability. What's more, the PVXp 12 DSP features several molded-in cabinet handles for extra grab-and-go convenience. And when it comes to flying PVXp 12 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 12 DSP speakers are so lightweight you may just be tempted to throw them in the back of your truck literally. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 12 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 12 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or need a good speaker for speech sound reinforcement, your Peavey PVXp 12 DSP will do the trick. It packs 830 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 12 DSPs can easily cover audiences in the hundreds. Additionally, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 12 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 12 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 12 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 12 DSP Features: 12" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 10 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts The extra angled section on the right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 12" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 51Hz-20kHz Frequency Response: 60Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 24.5" Width: 16.1" Depth: 15" Weight: 43 lbs. Manufacturer Part Number: 03616450 ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

(2) PVXP15 DSP 15 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj Speaker Stands+XLR Cable Peavey PVXp 12 DSP 830W 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 12 DSP loudspeaker provides you with the sound reinforcement you need. Pumping a muscular 830 watts through a powerful 12" woofer and 1.4" titanium compression driver, the PVXp 12 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 12 DSP's durability, allowing it to easily withstand the routine wear that comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 12 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. That's why Peavey built the PVXp 12 DSP to be as lightweight as possible without sacrificing durability. What's more, the PVXp 12 DSP features a number of molded-in cabinet handles for extra grab-and-go convenience. And when it comes to flying PVXp 12 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 12 DSP speakers are so lightweight, you may just be tempted to literally throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 12 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 12 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or just need a good speaker for speech sound reinforcement, your Peavey PVXp 12 DSP will do the trick. It packs 830 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 12 DSPs can easily cover audiences in the hundreds. What's more, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 12 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 12 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 12 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 12 DSP Features: 12" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 10 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles, with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts Extra angled section on right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 12" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 51Hz-20kHz Frequency Response: 60Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 24.5" Width: 16.1" Depth: 15" Weight: 43 lbs. Manufacturer Part Number: 03616450 ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 (4) Peavey PV 50' Foot 14-Gauge 1/4" TS to 1/4" TS S/S Speaker Cables PV® Series Cables offer quality and reliability at an affordable price! The PV 50 ft. 14 gauge 1/4" to 1/4" speaker cable has high-quality proprietary connectors. Peavey item 00576110. (4) Peavey PV 50' Foot 14-Gauge 1/4" TS to 1/4" TS S/S Speaker Cables Price is for (4) Peavey PV 50' Foot 14-Gauge 1/4" TS to 1/4" TS S/S Speaker Cables Authorized Peavey Dealer! The PV® Series Cables offer quality and reliability at an affordable price! General Features: Peavey PV 50' Foot 14-Gauge 1/4" TS to 1/4" TS S/S Speaker Cable Equipped with high-quality Peavey connectors 50 ft. length Weight Unpacked: 2.20 lb(1 kg) Weight Packed: 2.20 lb(1 kg) Width Packed: 8.25"(20.955 cm) Height Packed: 10"(25.4 cm) Depth Packed: 1.5"(3.81 cm) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Peavey RX14 Professional 1.4" Professional High Frequency Horn Drivers Features: Peavey RX14 1.4" High Frequency Drivers. Throat Parameter: .938" / 23.8 mm. Nominal Impedance: 8 Ohms . Minimum Impedance: 7.1 Ohms. DC Resistance: 6.8 Ohms Power Capacity 1000 Hz to 20,000 Hz: 120 W peak60 W program30 W continuous. Sensitivity: 104 dB SPL 1 Watt at 1 meter On-axis on 90 H x 45 V horn Nominal Efficiency: 30%. Frequency Response: 1.5 kHz to 20 kHz. Recommended Crossover: 1,800 Hz at 12 dB / Octave. Lowest Recommended Crossover: 2,000 Hz at 12 dB / Octave Diaphragm: Commercially pure titanium. Voice Coil Diameter: 1.4" / 34.4 mm. Voice Coil Material: Edge-wound ribbon with high temp Kapton bobbin. Flux Density: 11,500 gauss (1.15T) Dimensions: 3.54" (90 mm) diameter 2.40" (61 mm) depth. Horn Coupling Diameter: .938" (23.8 mm). Horn Coupling Threads: Standard 1 3/8" / 18". Net Weight: 33.6 oz. Details: Save with this bundle Peavey 03495480 RX14 - 1 High-Frequency Compression Driver (Set of 2) The RX14 1" compression driver is known for excellent driver performance, reliability, and power handling. The voice coil is a copper clad aluminum wire wound on a Kapton high temperature coil former. The one-piece titanium diaphragm reduces the amount of moving mass, extending the high frequency response of the driver. Ferrofluid cooling is used for improved reliability and smoother frequency response. Package Dimensions: 4.2 x 4.2 x 3.2 inches ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

  (2) PVXP15 DSP 15 inch Powered Speaker 830W 15" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj XLR Cables Peavey PVXp 12 DSP 830W 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 12 DSP loudspeaker provides you with the sound reinforcement you need. Pumping a muscular 830 watts through a powerful 12" woofer and 1.4" titanium compression driver, the PVXp 12 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 12 DSP's durability, allowing it to easily withstand the routine wear that comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 12 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. That's why Peavey built the PVXp 12 DSP to be as lightweight as possible without sacrificing durability. What's more, the PVXp 12 DSP features a number of molded-in cabinet handles for extra grab-and-go convenience. And when it comes to flying PVXp 12 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 12 DSP speakers are so lightweight, you may just be tempted to literally throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 12 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 12 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or just need a good speaker for speech sound reinforcement, your Peavey PVXp 12 DSP will do the trick. It packs 830 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 12 DSPs can easily cover audiences in the hundreds. What's more, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 12 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 12 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 12 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 12 DSP Features: 12" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 10 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles, with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts Extra angled section on right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 12" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 51Hz-20kHz Frequency Response: 60Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 24.5" Width: 16.1" Depth: 15" Weight: 43 lbs. Manufacturer Part Number: 03616450 ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

4 Peavey PV 7 ND Magnet Dynamic Microphone with XLR to XLR Cable Since 1965, They ProsHave Turned To Peavey When Only The Best Will Do. The PV 7 Microphone CarriesOn This Tradition Of Excellence, Offering Uncompromising Quality And The Sound That's Made Peavey Famous At Remarkably Affordable Prices. The Performer AndPresenter Alike Can Appreciate The No-Nonsense Feature Set And Simplicity of the PV 7 Mic. With High Sensitivity, A Neodymium Magnet Diaphragm, On/off switch, And The Durability You've Come To Expect From Peavey, You Know The PV 7Will Get The Job Done, Even When The Budget Is Stretched To The Max (And WhoseIsn't These Days?). Includes 5-Meter XLR To XLR Cable. Peavey Item 03013490. General Features: PV 7 Microphone XLR to XLR ND magnet diaphragm High sensitivity Includes 5 meter XLR to XLR mic cable Weight Packed: 0.97 lb(0.44 kg) Width Packed: 3.25"(8.255 cm) Height Packed: 11"(27.94 cm) Depth Packed: 2.75"(6.985 cm) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

4 Peavey PV 7 ND Magnet Dynamic Microphone with 1/4" to XLR Cable Since 1965, They ProsHave Turned To Peavey When Only The Best Will Do. The PV 7 Microphone CarriesOn This Tradition Of Excellence, Offering Uncompromising Quality And The Sound That's Made Peavey Famous At Remarkably Affordable Prices. The Performer AndPresenter Alike Can Appreciate The No-Nonsense Feature Set And Simplicity of the PV 7 Mic. With High Sensitivity, A Neodymium Magnet Diaphragm, On/off switch, And The Durability You've Come To Expect From Peavey, You Know The PV 7Will Get The Job Done, Even When The Budget Is Stretched To The Max (And WhoseIsn't These Days?). Includes 5-Meter XLR To 1/4" Cable. Peavey Item03013500. General Features: PV 7 Microphone 1/4" to XLR ND magnet diaphragm High sensitivity Includes 5 meter 1/4" to XLR mic cable Weight Packed: 0.97 lb(0.44 kg) Width Packed: 3.25"(8.255 cm) Height Packed: 11"(27.94 cm) Depth Packed: 2.75"(6.985 cm) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

4 Peavey PV 7 ND Magnet Dynamic Microphone with 1/4" to XLR Cable + 4 Microphone Stands Since 1965, They ProsHave Turned To Peavey When Only The Best Will Do. The PV 7 Microphone CarriesOn This Tradition Of Excellence, Offering Uncompromising Quality And The Sound That's Made Peavey Famous At Remarkably Affordable Prices. The Performer AndPresenter Alike Can Appreciate The No-Nonsense Feature Set And Simplicity of the PV 7 Mic. With High Sensitivity, A Neodymium Magnet Diaphragm, On/off switch, And The Durability You've Come To Expect From Peavey, You Know The PV 7Will Get The Job Done, Even When The Budget Is Stretched To The Max (And WhoseIsn't These Days?). Includes 5-Meter XLR To 1/4" Cable. Peavey Item03013500. General Features: PV 7 Microphone 1/4" to XLR ND magnet diaphragm High sensitivity Includes 5 meter 1/4" to XLR mic cable Weight Packed: 0.97 lb(0.44 kg) Width Packed: 3.25"(8.255 cm) Height Packed: 11"(27.94 cm) Depth Packed: 2.75"(6.985 cm) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

4 Peavey PV 7 ND Magnet Dynamic Microphone with XLR to XLR Cable Since 1965, They ProsHave Turned To Peavey When Only The Best Will Do. The PV 7 Microphone CarriesOn This Tradition Of Excellence, Offering Uncompromising Quality And The Sound That's Made Peavey Famous At Remarkably Affordable Prices. The Performer AndPresenter Alike Can Appreciate The No-Nonsense Feature Set And Simplicity of the PV 7 Mic. With High Sensitivity, A Neodymium Magnet Diaphragm, On/off switch, And The Durability You've Come To Expect From Peavey, You Know The PV 7Will Get The Job Done, Even When The Budget Is Stretched To The Max (And WhoseIsn't These Days?). Includes 5-Meter XLR To XLR Cable. Peavey Item 03013490. General Features: PV 7 Microphone XLR to XLR ND magnet diaphragm High sensitivity Includes 5 meter XLR to XLR mic cable Weight Packed: 0.97 lb(0.44 kg) Width Packed: 3.25"(8.255 cm) Height Packed: 11"(27.94 cm) Depth Packed: 2.75"(6.985 cm) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov