Monoblock Amplifiers (236)

Cerwin Vega B52 1000W Peak Stealth Bomber Series 2-Channel Class D Amplifier General Features: 2-Channel Bomber Series Class D Amplifier RMS Power Rating: 4 ohms: 200 watts x 2 chan. 2 ohms: 250 watts x 2 chan. Bridged, 4 ohms: 500 watts x 1 chan. Peak power output: 1000 watts Class D IR Chipset with DirectFET Power Mosfet Output Wired remote bass level control included LED power and protection indicators Two or Mono channel operation Speaker-level (high-level) inputs Ultra Compact High-Density Aluminum Alloy Chassis 3-way protection circuitry (thermal, overload, and short speaker protection) Selectable turn-On modes: REM / DC / VOX Input sensitivity: 200 mV - 10 V Frequency Response: 10 - 33,000 Hz Total Harmonic Distortion (THD): 0.25% Signal to Noise Ration: 101.7 dBa Selectable crossover mode: HP / Flat / LP Variable low/high-pass filter: 40 - 400 Hz Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Dimensions: 4.02"W x 6.61"L x 1.40"H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-A60M S-Series Monoblock Class-D Amplifier 600W RMSThe Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers.S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.General Features: Alpine S-Series Mono Power Amplifier - S-A60M RMS Power Output: 400W x 1 @ 4 Ohms (14.4V < 1% THD+N) 600W x 1 @ 2 Ohms (14.4V < 1% THD+N) S/N ratio: >85dB (ref: 1W into 4 ohms), >105dB (ref: rated power into 4 ohms) Remote bass knob compatible (requires RUX-KNOB.2, sold separately) CTA-2006 compliant THD+N ≤ 0.03% (ref 1W info 4 ohm) Frequency Response: 10HZ-400Hz (+/- 3 dB) Damping Factor: > 1000 variable low-pass filter (50-400 Hz, 24 dB/octave) variable bass boost (0-12 dB at 50 Hz) Speaker-level inputs (Speaker Wire to RCA Adapter Required) Preamp Inputs Improved heat sink and protection circuit design that eliminates thermal shut-down for dependable music playback Remote Sensing automatic turn-on when using speaker-level inputs Approximate Weight: 11 lbs Fuse Rating: fuse rating: 30A x 2 Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select from our website when purchased together with this amplifier. Dimensions: 8” W x 8” H x 2.25” D Authorized Dealer 1-year Manufacturer's Warranty What's in the S-A60M package: S-A60M owner's manual Mono subwoofer amplifier Two 30-amp ATO fuses (installed) Four 3/4" Screws 2mm Allen wrench Owner's manual Alpine Verification Certificate Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ORION CBA REMOTE Cobalt Amplifier Bass Knob Replacement Are you looking for the perfect bass knob replacement for your COBALT Amplifier? Look no further! This amazing product ensures your audio experience remains exceptional, and you can tweak your bass levels effortlessly. Whether you're a professional musician or an audiophile enthusiast, you know how crucial it is to have the right gear, and your COBALT Amplifier is no exception. But even the top-notch equipment needs occasional upgrades, and that’s where our bass knob replacement comes in.CBA Remote - Cobalt Amplifier Bass Knob Replacement - Orion Car Audio With our bass knob replacement, you can easily adjust the low frequencies to suit your listening preferences. Maybe you love the thumping beats of a bass-heavy track, or you prefer a more subtle, balanced sound. Either way, this replacement knob makes it all possible. It's designed to be a perfect fit for your COBALT Amplifier, so installation is a breeze – no need to worry about complicated steps or inadequate fitting. One of the standout features of our bass knob replacement is its durability. Made from high-quality materials, it's built to last, ensuring that your amplifier performs at its best for years to come. And while durability is critical, aesthetics also matter. This replacement knob boasts a sleek, stylish design that complements your COBALT Amplifier’s look, adding a touch of sophistication to your audio setup. So why should you choose our bass knob replacement? Simply put, it enhances your listening experience in ways that are both significant and subtle. Because we understand that every detail counts, we’ve crafted this product to meet the highest standards of audio quality and usability. Whether you’re dialing up the bass for a live performance or fine-tuning your stereo system, you’ll appreciate the smooth, responsive control this knob provides. As you can see, the bass knob replacement for the COBALT Amplifier is more than just a spare part – it's a crucial element of your sound system. It allows you to customize your audio experience with precision and style. So don't settle for anything less than the best. Get your bass knob replacement today and take your COBALT Amplifier to the next level! Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Soundstream TXP1.12000D 12,000 Watt Mono Amplifier 1-Ohm Car Stereo Amp To beat the competition & be the loudest on the streets, you have to think smarter, buy smarter, & build smarter. To help you become that guy, Soundstream’s proud to introduce Tarantula XTREME POWER amplifiers. New to the Soundstream arsenal in Fall 2020, these robust Class D amplifiers produce massive power beyond your wildest dreams. Don’t let their size fool you, though; they pack a HUGE punch. Superefficient silicon steel core power supply transformers deliver high-current power on demand. While traditional toroidal transformers are compact & deliver clean, uncolored power for premium sound, silicon steel alloy core transformers pass far more current more efficiently. What does this mean for you? More power to your subwoofers & speakers without needing a truckload of batteries & industrial-size power wiring… Mind blown! General Features: Tarantula Series Class D 1 ohms Stable Monoblock Amplifier RMS Power Rating: 4 ohms: 1,300 watts x 1 channel RMS Power Rating: 2 ohms: 2,300 watts x 1 channel RMS Power Rating: 1 ohm: 4,300 watts x 1 channel Total RMS power output: 4,300 watts Silicone Steel Alloy Core Power Supply Transformers & Flux Capacitors Military Grade SMT PCB Maintains Dynamic Performance LED Accent Lighting Illuminates Circuit Board Wired remote bass level control included Soft start turn-on Direct Short, Thermal, & Overload Circuits Protect Amplifier Input sensitivity: Low level: 200 - 6 volts Frequency Response: 20 - 20,000 Hz Total Harmonic Distortion (THD): 0.3% Signal Noise Ratio: 105 dB Variable low-pass filter: 80 - 20,000 Hz Variable Bass Boost: 0 - 12 dB 8 AWG gauge power and ground wiring are recommended for installation. Dimensions: 8.25" W x 7.25" L x 2.75" H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

AUTOTEK MM-3020.1D 3000W Max Mean Machine Series 1 ohm Stable Monoblock Class-D Amplifier w/ Bass Knob Included Product Details:  Autotek Mean Machine MM3020.1D Class-D 1 ohm Stable Monoblock Amplifier RMS Power Rating: Total power output: 3000 watts Pulse Width Modulated MOSFET power supply Wired remote bass level control included LED power (green) and protection (red) indicators Soft start turn-on Monochannel operation Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat sink Input sensitivity: Frequency Response: 15 - 150 Hz Total Harmonic Distortion (THD): <0.10% Signal Noise Ratio: >95 dB Variable low-pass filter: 40 - 300 Hz, 12 dB/octave Subsonic filter: 10 - 40 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 80A x 1 4-gauge power and ground wiring is recommended for installation.  Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine HDA-M80 Hi-Res Mono Subwoofer Amplifier, 500W x 1 at 4-Ohm, 800W x 1 at 2-Ohm & Absolute BT1700 Electrical Tape & Swivel Mobile Bracket Holder Bundle With the highest-quality music streaming available, Alpine Status delivers superior audio performance that takes your music to a whole new level. General Features: Hi-Res Audio Playback (192kHz/24Bit) Mono-Channel Amplifier High-Efficiency Digital Circuit Design Alpine’s Dual Negative Feedback Control Circuit High Bandwidth Amplifier Alpine’s Premium Class D Circuit Design Copper-plated chassis Black circuit board One-sided terminal layout Top panel sound controls Quick-connect power and speaker terminals Optional Remote bass knob compatible (requires RUX-KNOB.2 or RUX-H01, sold separately) Tech Specs Dimensions: 11.4375” x 7.5” x 2.125” Power Rating: (14.4V, ≤1.0% THD+N) 800W x 1 @ 2Ω 500W x 1 @ 4Ω THD+N: 0.02% (10W into 4 ohm) S/N Ratio: 83dB (1W into 4 ohm) Frequency response: 8-400Hz (-3dB) Damping factor: 1500 Selectable input level – HI/LO Variable High pass / Low pass crossover Variable Subsonic filter Bass EQ (0 to +12dB, Variable) Auto-turn on with remote sensing Superior Sound Using expertise gleaned from over five decades of crafting premium car audio products and trickle-down engineering and design from the Ultra Hi-Res AlpineF#1Status system technologies, the Alpine Status System features exceptional tooling and rich build quality for the best possible sound reproduction. Each component was hand-picked from the highest-quality materials for the highest in-class audio performance, which, when used as a complete system, can achieve 192kHz/24-bit playback. Impressive Output Powering a Hi-Res sound system without contributing noise during playback requires efficiency and precision, and the HDA-M80 was intentionally designed to provide impressive power output to the system while ensuring the purest audio performance. The amplifier’s broad dynamic range capability provides impressive output in a compact chassis that fits most vehicle applications. Precise Sound Reproduction The HDA-M80 features a high-efficiency digital circuit design that ensures ultra-low distortion levels for precise sound reproduction and superb sound quality. Intentional design elements, such as a copper-plated chassis and a black circuit board, raise the signal-to-noise ratio to 83dB and minimize noise and distortion during playback, delivering complete music fidelity that’s true to the source. Incredible Reliability Featuring technology unique to Alpine, the amplifier employs Alpine’s dual negative-feedback control circuit to improve linearity and deliver the most accurate sound amplification. This technology also stabilizes the amplifier output while driving the subwoofers for ultimate reliability. Easy Installation The HDA-M80 features Alpine’s quick-connect power and speaker connectors for quick and safe installation. The one-sided terminal layout and top-panel sound controls provide quick access to the amplifier's controls. Optimized For Full System The Alpine Status System is sold separately and can be used to build a custom sound system. Three sets of accurate 4V preamp outputs are included to add additional amplifiers if more power is needed. For best results, install the complete Alpine Status system together as a full system to achieve the highest in-class audio performance, only second to the Ultra High-Resolution AlpineF#1System. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine HDA-M80 Hi-Res Mono Subwoofer Amplifier, 500W x 1 at 4-Ohm, 800W x 1 at 2-Ohm With the highest-quality music streaming available, Alpine Status delivers a superior audio performance that will take your music to a whole new level. General Features: Hi-Res Audio Playback (192kHz/24Bit) Mono-Channel Amplifier High-Efficiency Digital Circuit Design Alpine’s Dual Negative Feedback Control Circuit High Bandwidth Amplifier Alpine’s Premium Class D Circuit Design Copper-plated chassis Black circuit board One-sided terminal layout Top panel sound controls Quick-connect power and speaker terminals Optional Remote bass knob compatible (requires RUX-KNOB.2 or RUX-H01, sold separately) Tech Specs Dimensions: 11.4375” x 7.5” x 2.125” Power Rating: (14.4V, ≤1.0% THD+N) 800W x 1 @ 2Ω 500W x 1 @ 4Ω THD+N: 0.02% (10W into 4 ohm) S/N Ratio: 83dB (1W into 4 ohm) Frequency response: 8-400Hz (-3dB) Damping factor: 1500 Selectable input level – HI/LO Variable High pass / Low pass crossover Variable Subsonic filter Bass EQ (0 to +12dB, Variable) Auto-turn on with remote sensing Superior Sound Using expertise gleaned from over five decades of crafting premium car audio products and trickle-down engineering and design from the Ultra Hi-Res AlpineF#1Status system technologies, the Alpine Status System features exceptional tooling and rich build quality for the best possible sound reproduction. Each component was hand-picked from the highest-quality materials for the highest in-class audio performance, that when used as a complete system, can achieve 192kHz/24Bit playback. Impressive Output Powering a Hi-Res sound system without contributing noise during playback requires efficiency and precision and the HDA-M80 was intentionally designed to provide impressive power output to the system while ensuring the purest audio performance. The amplifier’s wide dynamic range capability provides impressive output in a compact chassis that fits most vehicle applications. Precise Sound Reproduction The HDA-M80 features a high-efficiency digital circuit design that ensures ultra-low distortion levels for precise sound reproduction and superb sound quality. Intentional designs, like a copper-plated chassis and black circuit board, bring the signal-to-noise ratio up to 83dB and minimize noise and distortion during playback for complete music fidelity that’s true to the original source. Incredible Reliability Featuring technology unique to Alpine, the amplifier features Alpine’s dual negative feedback control circuit to improve linearity for the most accurate sound amplification. This technology also stabilizes the amplifier output while driving the subwoofers for ultimate reliability. Easy Installation The HDA-M80 features Alpine’s quick-connect power and speaker connectors for quick and safe installation. The one-sided terminal layout and top-panel sound controls give the user quick access to the amplifier's controls. Optimized For Full System The Alpine Status System is sold separately and can be used to build a custom sound system. Three sets of true 4V preamp outputs are included to add additional amplifiers if more power is needed. For best results, install the complete Alpine Status system together as a full system to achieve the highest in-class audio performance only second to the Ultra High-Resolution AlpineF#1System. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-A120M S-Series Class-D Mono Subwoofer Amplifier, Hi-Res Certified, 1200W RMS at 1 & 2-Ohm + RUX-KNOB.2 Bass Knob Remote Control + 2 Alpine S2-SB10V 1800 Peak (600W RMS) Loaded Single 10" Vented Subwoofer Enclosure + Alpine KTX-H12 Linking Bracket for Two Single 12" Alpine Halo Loaded Subwoofer Enclosures Alpine S2-A120M 1200W Class D RMS S-Series Monoblock Car Amplifier Entry-level sound just got elevated with the S2-A120M Mono Amplifier. Its sleek design houses an Alpine Class D Amplifier Circuit with 1200W of powerful bass performance.General Features:• 1200W Mono Amplifier• Alpine’s Class D Amplifier Circuit• Two-Sided Terminal Layout• Built-in Selectable / Adjustable Crossovers• Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately) Alpine S2-SB10V 1800 Peak (600W RMS) Loaded Single 10" Vented Subwoofer Enclosure. Alpine KTX-H12 Linking Bracket for Two Single 12" Alpine Halo Loaded Subwoofer Enclosures Alpine RUX-KNOB.2 Dash Mount Wired Bass Remote Controller for Alpine Amplifiers Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-A120M S-Series Class-D Mono Subwoofer Amplifier, Hi-Res Certified, 1200W RMS at 1 & 2-Ohm + RUX-KNOB.2 Bass Knob Remote Control Entry-level sound just got elevated with the S2-A120M Mono Amplifier. Its sleek design houses an Alpine Class D Amplifier Circuit with 1200W of powerful bass performance.Unparalleled Power - Alpine’s S-Series S2-A120M 1200W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 1200W at 1 ohm or 2 ohms, this mono amp can drive even the most demanding subwoofers, delivering clean, distortion-free bass for a wide range of applications.Simplified Installation – The amplifier was intentionally designed with sound controls on the side panels, rather than the top panel, making it easier to access gain and crossover controls when installed under vehicle seats or in shallow-depth locations. Removable end caps were added to cover the side controls and connections, providing a clean, sleek finish to the amplifier.General Features:• 1200W Mono Amplifier• Alpine’s Class D Amplifier Circuit• Two-Sided Terminal Layout• Built-in Selectable / Adjustable Crossovers• Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)TECH SPECS:• Dimensions: 13.1” W x 2.25” H x 8.25” D• Weight: 8 lbs, 11 oz• Power Rating: 14.4V, < 0.1% THD +N• Power Output: 600W x 1 @ 4Ω, 1200W x 1 @ 2Ω, 1200W x 1 @ 1Ω• S/N Ratio: >85dB• Frequency Response: 20Hz – 400Hz• Damping Factor: >750WHAT’S IN THE BOX:• (x1) S2-A120M Mono Amplifier• (x2) Connection end covers w/4 attachment screws• Owner’s Manual• “Birth Sheet” that certifies by measurement the actual power of the amplifier in the box• (x4) Self-tapping screws• (x1) Hexagon wrench• Alpine Registration Card• Alpine Limited Warranty Sheet• Tips sheet for power supply wire connections Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-A120M S-Series Class-D Mono Subwoofer Amplifier, Hi-Res Certified, 1200W RMS at 1 & 2-Ohm Entry-level sound just got elevated with the S2-A120M Mono Amplifier. Its sleek design houses an Alpine Class D Amplifier Circuit with 1200W of powerful bass performance.Unparalled Power - Alpine’s S-Series S2-A120M 1200W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 1200W at a 1ohm or 2ohm drive, this mono amp is capable of driving even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications.Simplified Installation – The amplifier was intentionally designed with sound controls located on the side panels, instead of the top panel, making it easier to access gain and crossover controls when installed under vehicle seats or in shallow-depth locations. Removable end caps were added to cover the side controls and connections, providing a clean, sleek finish to the amplifier.General Features:• 1200W Mono Amplifier• Alpine’s Class D Amplifier Circuit• Two-Sided Terminal Layout• Built-in Selectable / Adjustable Crossovers• Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)TECH SPECS:• Dimensions: 13.1” W x 2.25” H x 8.25” D• Weight: 8 lbs, 11 oz• Power Rating: 14.4V, < 0.1% THD +N• Power Output: 600W x 1 @ 4Ω, 1200W x 1 @ 2Ω, 1200W x 1 @ 1Ω• S/N Ratio: >85dB• Frequency Response: 20Hz – 400Hz• Damping Factor: >750WHAT’S IN THE BOX:• (x1) S2-A120M Mono Amplifier• (x2) Connection end covers w/4 attachment screws• Owner’s Manual• “Birth Sheet” that certifies by measurement the actual power of the amplifier in the box• (x4) Self-tapping screws• (x1) Hexagon wrench• Alpine Registration Card• Alpine Limited Warranty Sheet• Tips sheet for power supply wire connections Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.