crux (293)

Crux LOC-2 2-Channel Line Out Converter   ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux LOC-4 4-Channel Line Out Converter with Remote 12-Volt Trigger   ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux LVCB-07 Factory Rear-View Camera Retention Solution for Ram, Jeep Vehicles with Digital Camera General Features: For maintaining factory GMSL (gigabit Multimedia Serial Link) camera when removing factory radioNo dealer programming required Compatibility: RAM2019- UpJEEP2018 – 2021 Wrangler2020 – 2021 Gladiator ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux MG-3 Rear-view Interface for 2007-2018 Chrysler, Dodge, Jeep & Ram Vehicles w/ MyGig Radios General Features: Backup Camera Input A/V Input Video in Motion Plug n Play Works with HI and LOW-Speed CAN-BUS 12V + Power Output for Camera (1A)  Compatibility: CHRYSLER 2011 – 2014 200 2008 – 2010 300/300C 2008 – 2010 Aspen 2007 – 2011 Sebring 2008 – 2017 Town & Country DODGE 2007 – 2015 Avenger 2010 – 2012 Caliber 2008 – 2017 Caravan 2009 – 2014 Challenger 2008 – 2010 Charger 2008 – 2012 Dakota 2008 – 2013 Durango 2009 – 2010 Journey 2007 – 2012 NitroJEEP 2008 – 2010 Commander 2008 – 2016 Compass 2008 – 2013 Grand Cherokee 2008 – 2015 Liberty 2009 – 2017 Patriot 2007 – 2017 Wrangler RAM 2009 – 2012 Ram VOLKSWAGEN 2009 – 2013 Routan Notes:Not compatible if Factory RSE is installed.Not compatible if Factory Rear-View Camera is installed.Does not supply Reverse Trigger on Manual Transmissions. Camera power must be tapped to reverse light wire. Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux MRVBM-77P Backup Camera and Video Interface for 2012-2016 BMW Vehicles w/ CIC-High (NBT) 6-Pin LVDS Connector The CRUX MRVBM-77P is a Backup Camera and Video Input interface for 2012-2016 BMW vehicles w/ CIC-High (NBT) 6-Pin LVDS Connector and 6.6”, 8.8” and 10.2” monitors. It seamlessly integrates with the factory installed system for adding an aftermarket camera and provides 3 Additional Video Inputs. General Features: OEM Style Dynamic Guide LinesSwitch modes via the iDrive controls.With Dynamic Parking Assistance System (PAS).Adds 3 Additional Video Inputs.Supports PIP (Picture in Picture) display.Provides power for a backup camera.NOTE: Supports radios with 6.5”, 8.8” and 10.2” screen   Compatibility: BMW2012 – 2015 1 Series (F20)2012 – 2016 3 Series (F30/F31)2012 – 2016 5 Series (F10/F11)2012 – 2015 5 Series GT (F07)2012 – 2016 6 Series (F12/F13)2012 – 2016 7 Series (F01/F02)2016 – 2016 X1 (F48)2014 – 2016 X3 (F25)2014 – 2016 X4 (F26)2012 – 2016 X5 (E70)2013 – 2016 X6 (F25)2014 – 2016 X (F16)2014 – 2016 i32015 – 2016 i8MINI2014 – 2016 Cooper (F56) Vehicles with CIC-High (NBT) 6-Pin LVDS Connector and 6.6”, 8.8” and 10.2” monitors ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux MRVBM-77Q Backup Camera and Video Interface for 2017 and up BMW Vehicles with Evo2 iDrive5 Systems The CRUX MRVBM-77Q is a Backup Camera and Video integration Solution for Select 2017 and up BMW vehicles equipped with Evo2 iDrive5 Systems. It seamlessly integrates with the factory installed system for adding an aftermarket camera and provides 3 additional Video Inputs. General Features: OE Style Dynamic Guide LinesSwitch modes via the iDrive, radio or SWC buttonWith Dynamic Parking Assistance System (PAS)Compatible with both Touchscreen and Non-touchscreen iDrive systemsAdds Backup Camera + 3 Video InputsProvides power for a backup camera NOTES:Compatible with Evo2 iDrive5 Systems.Supports radios with 8.8” and 10.2” screens. Compatibility: BMW2017 – 2018 1 Series2017 – 2018 2 Series2017 – 2018 3 Series2017 – 2018 4 Series2017 – 2018 5 Series2017 – 2018 6 Series2017 – 2018 7 Series2017 – 2018 X32017 – 2018 X42017 – 2018 X5MINI2017 – 2018 Mini   ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux MRVFD-79Q Backup Camera and Video Input Integration for 2016 and up Ford Vehicles w/ Sync 3 Systems The CRUX MRVFD-79Q is a Backup Camera and Video Input integration solution for Ford Vehicles with Sync 3 Radio Systems. It seamlessly integrates with the factory-installed Radio System for activating an aftermarket rear-view camera. The interface also provides three Additional Video Inputs. General Features: Rear-view camera input.Provides 3 Video Inputs.With OE-type Dynamic Parking Guidelines.Toggle Video inputs from the OE radio button, wireless remote control or wired push button switch provided.On-screen display and setup. Compatibility:FORD2017 and Up Explorer2016 and Up F-1502016 and Up Focus2016 and Up Mustang​2017 and Up F-2502017 and Up F-350​2017 and Up F-4502017 and Up F-550NAVIGATION / RADIO COMPATIBILITYSync 3 radio ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux MRVLR-68 Multimedia Integration for Land Rover Vehicles 2012-Up w/ Touchscreen Navigation Systems The CRUX MRVLR-68 is a Multimedia Integration Interface for Land Rover vehicles (2012-up) that are equipped with Touchscreen Navigation System - Version 3. The Interface allows for connection of 3 A/V sources to the factory navigation system. The unit integrates the factory screen with an aftermarket rear-view camera (not included) and also allows for Video in-Motion activation. It enhances functionality of multiple aftermarket devices for being controlled by the factory-installed touchscreen infotainment system in Land Rover vehicles. General Features: Provides 3 Audio / Video InputsAutomatically switches to rear-view camera image when reversingProvides Rear-seat-entertainment output for connected (Aftermarket) AV-sourcesVideo-in-motion activationPlug & Play Multimedia Interface Compatibility:LAND ROVER2012 – 2015 LR22012 – 2015 LR42015 – 2015 New Discovery Sport2012 – 2015 Range Rover Evoque2012 – 2015 Range Rover SportNAVIGATION / RADIO COMPATIBILITYTouchscreen Navigation System – Version 3 ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux MRVLR-68Q Backup Camera Integration for 2016-2017 Land Rover & Jaguar Vehicles w/ 8″ InControl Infotainment Systems The CRUX MRVLR-68Q is a Multimedia integration solution for 2016 and 2017 Land Rover and Jaguar Vehicles with 8" and 10.2" InControl Touchscreen Infotainment Systems. It seamlessly integrates with the factory installed Radio System for activating rear-view & front-view camera inputs and also provides an additional Video Input along with two HDMI Inputs. General Features: Rear-view camera input.Front-view camera input.Front-view camera and Video Inputs can still be used even if vehicle is equipped with anOEM rear view camera.Provides 2 HMDI Inputs for Navigation or Wi-Fi Mirroring (Crux Part#: WVI-X, soldseparately).Add one Composite Video input.With OE type Dynamic Parking Guidelines.Toggle AV inputs from OE radio buttons, wireless remote control or wired push buttonswitch provided.On-screen display and setup. Compatibility: LAND ROVER2016 – 2017 Discovery SportJAGUAR2016 – 2017 XE2016 – 2017 XF2016 – 2017 F-PaceNAVIGATION / RADIO COMPATIBILITYInControl Touch 8″ screen radios ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux mva-124 Multi Video Amplifier 1 IN and 4 OUT ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux PCM-3 Rear-view Integration for 2009-2016 Porsche Vehicles w/ PCM 3 and 3.1 Navigation Systems (Camera Not Included) The CRUX PCM-3 is a Rear-vision integration system and VIM enabler for Porsche vehicles with PCM 3.1 Navigation Systems. (It is also compatible with PCM 3.0 Systems in Cayenne only.) It seamlessly integrates with the factory installed system. General Features: Automatically switches screen to Rear-view when a vehicle is in Reverse modePlug & Play InstallationActivates VIM feature for PCM 3.1 Screen (Internal DVD will not function while a vehicle is moving) Compatibility:Porsche2014 – 2016 Macan2014 – 2016 911 GT32013 – 2016 911*2014 – 2016 Boxster*2009 – 2016 Cayenne2014 – 2016 Cayman*2010 – 2016 Panamera Compatible Navigation Radio SystemPCM 3.1 System W/NavigationPCM 3.0 System W/Navigation (Cayenne only)  ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux PCM-3F Rear & Front View Integration Interface for Porsche Vehicles with PCM 3 & 3.1 Navigation Systems The CRUX PCM-3F is a Rear & Front View Integration Interface for Porsche Vehicles with PCM 3 & 3.1 Navigation Systems. Allows video in motion capability. It seamlessly integrates with the factory installed system General Features: • Rear & Front View Camera Inputs• Optional coding of ParkAssist to retrofit factory PDC• Automatically switches screen to Rear-view when Reverse gear is engaged and to Front camera view when gear is engaged to drive• Manual activation of the front camera using the steering wheel control button• Plug & Play Installation• Video in Motion function Compatibility:Porsche2014 – 2016 Macan2014 – 2016 911 GT32013 – 2016 9112014 – 2016 Boxster2009 – 2016 Cayenne2014 – 2016 Cayman2010 – 2016 PanameraCompatible Navigation Radio SystemPCM 3.1 System W/NavigationPCM 3.0 System W/Navigation (Cayenne only) Notes:1. PCM software version MUST be 4.xx or higher.2. Video in Motion feature does not work on the internal DVD video player.  ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·