00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate Prime R2-750X1 750W RMS Prime Series Class-D Monoblock 1-Ohm Stable Amplifier
$349.99
$550.00
Rockford Fosgate Prime R2-750X1 750W RMS Prime Series Class-D Monoblock 1-Ohm Stable Amplifier
Looking for a monoblock with reliable power ratings and efficiency without having to spend a fortune? With a rating of 250 watts x 1 channel @ 4 ohms, 500 watts x 1 channel @ 2 ohms, and 750 watts x 1 channel at 1 ohm, this amplifier is perfect for those looking to amplify anything from entry-level to some more serious power at the 1-ohm rating. Fine-tuning your amplifier will be a cinch with the use of the variable high-pass, infrasonic, and variable bass boost crossovers. The use of a cast aluminum heat sink will control heat dissipation to keep your amplifier running cool and efficiently no matter how long or short your listening sessions turn out to be. So if you are looking for a Class D highly efficient monoblock amplifier that will never let you down, then look no further than Rockford Fosgate's R750-1D.
General Features:
Rockford Fosgate Prime R2-750X1
Class-D FullRange MonoBlock Amplifier
RMS Power Rating: 4 ohms: 250 watts x 1 channel
RMS Power Rating: 2 ohms: 500 watts x 1 channel
RMS Power Rating: 1 ohm: 750 watts x 1 channel
Total power output: 500 watts
Balanced Differential Inputs with RCA Pass Through Outputs
High-Level Input Capable
Defeatable Auto Turn-On Circuit
Features C.L.E.A.N. Set-up
Variable Input Gain adjustment level
R.L.C. Remote Level Control
Variable Infrasonic Filter
Continuously Variable On Board Punch EQ
Top Mounted Control Panel
Short Circuit & Over Current Protection
CEA-2006 Compliant & CE Compliant
Full Range Class D
Rollback Protection
Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
Input sensitivity:
Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V
Frequency Response: 20 Hz - 250 Hz
Total Harmonic Distortion (THD): >1%
Crossover Controls
Low-Pass: 50 Hz - 250 Hz
Sub Infrasonic: 15 Hz - 40 Hz
Recommended Fuse Rating: 120A
4 gauge power and ground wiring are recommended for installation
Dimensions: "1.9" x "6.8" x "10.1"
Authorized Internet Dealer
1-Year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate T1500-1bdcp 1500 watts RMS + Rockford Fosgate Power T1D412 12" Subwoofer
$1,149.98
$2,000.00
Rockford Fosgate T1500-1bdcp Power Series mono sub amplifier 1,500 watts RMS x 1 at 2 ohms + Rockford Fosgate Power T1D412 12" Dual 4-ohm Voice Coil Component subwoofers
Powerful bass performanceRockford Fosgate enjoys a well-deserved reputation for building high-quality mobile audio products. Their Power Series amps sit at the top of the car audio food chain, with proven durability and proprietary technologies that deliver stronger, more reliable performance than most other amps on the planet today. Rockford Fosgate's high-tech solutions yield more powerPower Series amplifiers actively monitor their speakers' performance using Rockford Fosgate's Constant Power technology. A speaker's impedance naturally fluctuates as it performs. So, just like your cruise control increases the engine's RPM to maintain your car's speed uphill, Constant Power maintains this amp's output by increasing its internal voltage and current when the speaker's impedance rises. This results in up to a 25% increase in the amp's total power output, especially in the crucial range below 50 Hz where a sub amp really has to shine.Rugged construction, massive bass
Rockford Fosgate builds each Power Series mono amplifier with heavy-duty, state-of-the-art components. The award-winning Dynamic Thermal Management design manages the temperature of the internal components, distributing heat evenly for higher efficiency and lower distortion. The unique heat sink allows the heat to escape more readily so the high-power output transistors stay cooler and last longer.
The T1500-1bdCP mono sub amp uses an efficient Class bd design to deliver up to 1,500 watts to your subwoofer system from a remarkably compact chassis. This amp can even drive a 1-ohm load, so you can get massive bass out of a wide variety of system designs. The variable 24/dB per octave crossover creates a more natural-sounding transition from your speakers to your subs. And the 2-year warranty tells you that Rockford Fosgate stands behind this bass behemoth.
Product highlights:
mono subwoofer amplifier
1,000 watts RMS x 1 at 4 ohms (1,500 watts RMS x 1 at 2 ohms)
1,500 watts RMS x 1 at 1 ohm
CEA-2006 compliant
Dynamic Thermal Management cooling system
variable low-pass filter (35-250 Hz, 24 dB/octave)
selectable subsonic filter (28Hz, 24 dB/octave)
variable bass boost (0-18 dB at 45 Hz)
optional wired remote bass boost
Class-BD amplifier design
MOSFET power and output stages
preamp-level inputs and outputs
4-gauge power and ground leads and a 200-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 200-amp in-line fuse between the distribution block and the amplifier is recommended
14-15/16"W x 2-1/4"H x 8-15/16"D
warranty: 2 years
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate T1500-1bdcp 1500 watts RMS x 1 at 2 ohms + Install Kit
$859.99
$1,199.99
Rockford Fosgate T1500-1bdcp Power Series mono sub amplifier 1,500 watts RMS x 1 at 2 ohms + RFK4 Wire Install Kit
Powerful bass performanceRockford Fosgate enjoys a well-deserved reputation for building high-quality mobile audio products. Their Power Series amps sit at the top of the car audio food chain, with proven durability and proprietary technologies that deliver stronger, more reliable performance than most other amps on the planet today. Rockford Fosgate's high-tech solutions yield more powerPower Series amplifiers actively monitor their speakers' performance using Rockford Fosgate's Constant Power technology. A speaker's impedance naturally fluctuates as it performs. So, just like your cruise control increases the engine's RPM to maintain your car's speed uphill, Constant Power maintains this amp's output by increasing its internal voltage and current when the speaker's impedance rises. This results in up to a 25% increase in the amp's total power output, especially in the crucial range below 50 Hz where a sub amp really has to shine.Rugged construction, massive bass
Rockford Fosgate builds each Power Series mono amplifier with heavy-duty, state-of-the-art components. The award-winning Dynamic Thermal Management design manages the temperature of the internal components, distributing heat evenly for higher efficiency and lower distortion. The unique heat sink allows the heat to escape more readily so the high-power output transistors stay cooler and last longer.
The T1500-1bdCP mono sub amp uses an efficient Class bd design to deliver up to 1,500 watts to your subwoofer system from a remarkably compact chassis. This amp can even drive a 1-ohm load, so you can get massive bass out of a wide variety of system designs. The variable 24/dB per octave crossover creates a more natural-sounding transition from your speakers to your subs. And the 2-year warranty tells you that Rockford Fosgate stands behind this bass behemoth.
Product highlights:
mono subwoofer amplifier
1,000 watts RMS x 1 at 4 ohms (1,500 watts RMS x 1 at 2 ohms)
1,500 watts RMS x 1 at 1 ohm
CEA-2006 compliant
Dynamic Thermal Management cooling system
variable low-pass filter (35-250 Hz, 24 dB/octave)
selectable subsonic filter (28Hz, 24 dB/octave)
variable bass boost (0-18 dB at 45 Hz)
optional wired remote bass boost
Class-BD amplifier design
MOSFET power and output stages
preamp-level inputs and outputs
4-gauge power and ground leads and a 200-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 200-amp in-line fuse between the distribution block and the amplifier is recommended
14-15/16"W x 2-1/4"H x 8-15/16"D
warranty: 2 years
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Power T750X1bd 750W Power Series Ultra Compact Class-BD Monoblock Amplifier + Absolute 4 Gauge Amplifier Installation Wiring Kit
$529.99
$1,059.98
Rockford Fosgate T750x1BD Power 500 Watts Watt Class-AD Mono Channel Amplifier + Absolute KIT4 4 Gauge Amplifier Installation Wiring Kit
The Power T750X1bd is an ultra-compact, Class bd 750-watt mono amplifier. It features a high-level auto turn-on, the CLEAN circuit with input/output clip detection, top-mounted controls, and dual fan forced induction cooling. Additionally, it has our patented Punch EQ circuit built in and Differential inputs with auto turn-on capabilities. Perfect for hybrid, electric, small cars, trucks, motorcycles, and side-by-side UTVs.
General Features:
Rockford Fosgate T750X1bd
Class-BD 1-Ohm Stable Monoblock Amplifier
RMS Power Rating:
4 ohms: 500 watts x 1 chan.
2 ohms: 750 watts x 1 chan.
1 ohm: 750 watts x 1 chan.
Total power output: 750 watts
CEA-2006 Compliant Amplifier
Perfect for hybrid, electric, small cars, trucks, motorcycles, and side-by-side UTVs
Optional remote Punch Level Control (PLC2 ready (w/ input clip indicator)
LED power (blue), protect (red), input clip (red), and output clip (blue/red) indicators
L.E.A.N. input/output clip detection and indicator LEDs
Top-mounted controls
Built-in Punch EQ circuit
Real-time thermal sensing with Rollback technology
Remote-Out feature when using high-level inputs
Rockford Fosgate proprietary low impedance Constant Power
Mono channel operation
Speaker-level (high-level) inputs with auto turn-on
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual extruded heat sinks
Dual fan cooled
Input sensitivity: 150mV to 12V
Speaker wire gauge: 10 AWG
Frequency Response: 20 - 230Hz
Total Harmonic Distortion (THD): <1.0%
Variable low-pass filter: 50 - 250 Hz, 12 dB/octave
Variable Bass Boost: 0 to +18 dB bass boost at 45 Hz
Recommended Fuse: 100A (not included)
2-Year Warranty
Absolute KIT 4 Gauge Amp Kit
17 ft. of red 4 AWG high current power cable
3 ft. of black 4 AWG ground cable
15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire
20 ft. of 12 AWG OFC Speaker cable
20 ft. of 16 AWG remote turn-on wire
6 ft. of split loom tubing
1 Gold-plated 80 AMP AGU fuse
1 4 AWG gold ring terminal
750W Power Series Ultra-Compact Class-BD Monoblock Amplifier
500 Watts RMS x 1 @ 4 ohms
750 Watts RMS x 1 @ 2 ohms
750 Watts RMS x 1 @ 1 ohm
Complete 4 Gauge Amplifier Kit For Use in Any Car, Truck, RV, or Boat
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine R2-A75M 750 W RMS R-Series Class-D Mono Sub Amplifier + 4 Gauge Amp Kit
$499.95
$900.00
Alpine R2-A75M 750 W RMS R-Series High-Performance Class-D Mono Sub Amplifier + Absolute KIT4 4 Gauge AMP Kit
The innovative and highly anticipated all-new R-Series amplifiers are truly remarkable powerhouse masterpieces.
With a meticulous approach, every aspect of their design composition and engineering has been embarked upon to achieve sonic excellence and power performance, all while embodied in a compact form factor. Furthermore, they incorporate advances in technology gained from the ultra-high-end Alpine Status series amplifiers.
A true class leader, with 750W RMS of onboard power, coupled with its all-digital “no shutdown” circuit design, the R2-A75M maintains peak performance at high power output achieving earth-shattering, authoritative bass at virtually any volume.
Be wowed by the bold aesthetic design and stunning build quality—from the moment you see, touch, and hold these amplifiers exude quality. With their solid cast aluminum body, precision machined finishes, and high-quality terminal blocks, every detail is premium and first-class.
General Features:
R-Series Class D 2 ohms Stable Monoblock Amplifier
RMS Power Rating: 4 ohms: 500 watts x 1 channel
RMS Power Rating: 2 ohms: 750 watts x 1 channel
Total RMS power output: 750 watts
LED Power/Protect Light
1 pair of pre-amp outputs
Input sensitivity: Low level: 0.1 - 4.0 volts
Input sensitivity: High level: 0.4 - 10 volts
Frequency Response: 10 - 400 Hz
Total Harmonic Distortion (THD): 1%
Signal to Noise Ratio: 75 dB
Variable low-pass filter: 50 - 400 Hz
Subsonic filter: 0 - 40 Hz
Variable Bass Boost: 0 - 12 dB
Fuse Rating: 80A
4 AWG gauge amplifier wiring kit is recommended for installation
Dimensions: 11-1/8" L x 6-1/2" W x 2-3/16" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the R2-A75M package:
R2-A75M owner's manual
Mono subwoofer amplifier
Four 1" pan-head screws
3mm Allen key
2.5mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine R2-A75M 750 W RMS R-Series High-Performance Class-D Mono Sub Amplifier
$499.95
$900.00
Alpine R2-A75M 750 W RMS R-Series High-Performance Class-D Mono Sub Amplifier
The innovative and highly anticipated all-new R-Series amplifiers are truly remarkable powerhouse masterpieces.
With a meticulous approach, every aspect of their design composition and engineering has been embarked upon to achieve sonic excellence and power performance, all while embodied in a compact form factor. Furthermore, they incorporate advances in technology gained from the ultra-high-end Alpine Status series amplifiers.
A true class leader, with 750W RMS of onboard power, coupled with its all-digital “no shutdown” circuit design, the R2-A75M maintains peak performance at high power output achieving earth-shattering, authoritative bass at virtually any volume.
Be wowed by the bold aesthetic design and stunning build quality—from the moment you see, touch, and hold these amplifiers exude quality. With their solid cast aluminum body, precision machined finishes, and high-quality terminal blocks, every detail is premium and first-class.
General Features:
R-Series Class D 2 ohms Stable Monoblock Amplifier
RMS Power Rating: 4 ohms: 500 watts x 1 channel
RMS Power Rating: 2 ohms: 750 watts x 1 channel
Total RMS power output: 750 watts
LED Power/Protect Light
1 pair of pre-amp outputs
Input sensitivity: Low level: 0.1 - 4.0 volts
Input sensitivity: High level: 0.4 - 10 volts
Frequency Response: 10 - 400 Hz
Total Harmonic Distortion (THD): 1%
Signal to Noise Ratio: 75 dB
Variable low-pass filter: 50 - 400 Hz
Subsonic filter: 0 - 40 Hz
Variable Bass Boost: 0 - 12 dB
Fuse Rating: 80A
4 AWG gauge amplifier wiring kit is recommended for installation
Dimensions: 11-1/8" L x 6-1/2" W x 2-3/16" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the R2-A75M package:
R2-A75M owner's manual
Mono subwoofer amplifier
Four 1" pan-head screws
3mm Allen key
2.5mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream BXT1.5000D Built-in Digital Bass Reconstruction Amplifier
$164.99
$309.98
Soundstream BXT1.5000D Built-in Digital Bass Reconstruction Amplifier
Features:
1-OHM MINIMUM IMPEDANCE STABILITY
An amplifier’s impedance stability is its ability to continuously power speaker(s) of no less than the given impedance per channel without the risk of damage. Subwoofers are available in various voice coil configurations and impedances, so be sure yours will be no less than 1 ohm.
ACTIVE 12DB/OCTAVE CROSSOVERS & PHASE SHIFT
Active crossovers built into an amplifier are the most efficient crossovers to use in-car audio systems. Active crossovers protect speakers from damage by harmful frequencies and preserve optimum performance.
LOW-LEVEL RCA INPUT & PRE-AMP OUTPUT
Connect the car stereo's low-level (pre-amp) audio output to the amplifier using good quality twisted pair RCA interconnect cables. The amplifier pre-amp output daisy-chains the audio signal to multiple amplifiers of complex audio systems.
SWEEP Control
selects the frequency boosted by the equalizer. This is the “center frequency,” which can be as low as 27Hz or 63Hz. Choosing this frequency depends on your taste in music.
WIDTH Control
increases or decreases the bandwidth range, or “Q,” boosting frequencies near the “center frequency.” Narrow Q focuses on harmonics immediately surrounding the center frequency. Wide Q unlocks harmonics all around the center frequency.
MAX BASS INDICATOR
lights above the equalizer controls are a visual representation of the boost level. Bright, continuous illumination indicates maximum bass enhancement levels have been reached. Remember, more isn’t necessarily better…
DASH MOUNT CONTROL
Included with this amplifier can be mounted anywhere in the vehicle, but near the driver seat is recommended. The output level of the Bass Equalizer can be controlled, as well as the amp.
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream BXT1.10000D 10000W Monoblock Amplifier Built In BX-10 Bass Enhancer + Amp Kit
$279.99
$479.98
Soundstream BXT1-10000D 10,000 Watts Mono Amplifier Built In BX-10 Epicenter Bass Enhancer + Absolute KIT4 4 gauge Amp Kit
Soundstream BXT1.10000D 10000W Monoblock Amplifier Built-In BX-10 Bass Enhancer. Direct Short, Thermal, & Overload Circuits Protect Amplifier. Digital Bass. Quality sound processing is necessary for those who want the most out of their car audio system. Bass Xtreme amplifiers offer similar sound processing options by including the functions of a Bass Reconstruction Processor. Bass Processor boosts lower frequency harmonics that have been compressed or removed from today’s music recordings and are commonly added in-line before subwoofer amplifiers. Dial in the exact sound you want by tuning the frequency to boost, then increase the bandwidth range from that frequency to stimulate the harmonics around it. After slight adjustments, your audio system can sound like audio professionals have tuned it. Unlock and restore the bass from any system with Bass Xtreme Amplifiers.
It works great for music or factory radios that forget we enjoy bass response in our systems! No Problem! EDM, Banda, Rock, Jazz…
General Features:
Digital Bass Reconstruction Processor Built-in
Adds Impact to Music w/ Insufficient Sub Bass
27Hz-63Hz Variable Center/Sweep Frequency
Variable Q/Width to Broaden or Narrow the Bandwidth
2.5V-10V Output Voltage for Optimum Bass Tuning
LED MAX BASS Indicators Warning of Extreme Levels
1-ohm Minimum Impedance Monoblock Operation
Bridge 2 Monoblocks Together for Double Power!
MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
Military Grade SMT PCB Maintains Dynamic Performance
Direct Short, Thermal, & Overload Circuits Protect Amplifier
200mV-6V High Level or Low-Level RCA Input & Output
Variable 12dB Low Pass Crossover Blocks High Frequencies
Variable 12dB Subsonic Crossover Protects Subwoofer
1800 Phase Shift to Match Polarity of System Speakers
Dash Mount Gain Control Module Included
Power Handling:
1,400W x 1 at 4-Ohm Mono
2,100W x 1 at 2-Ohm Mono
3,300W x 1 at 1-Ohm Mono
10,000W Max Power
Variable 40-150Hz 12dB Low Pass Crossover
Variable 10-50Hz 12dB Subsonic Crossover
Selectable 180degree Phase Shift
Total Harmonic Distortion: < 0.3%
Frequency Response: 15-500Hz
Signal-to-Noise Ratio: 105dB
Input Sensitivity: 200mV - 6V
Dimensions: 7.50" W x 2.25" H x 19.25" L
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream BXT1.10000D 10000W Monoblock Amplifier Built In BX-10 Bass Enhancer
$249.99
$479.98
Soundstream BXT1-10000D 10,000 Watts Mono Amplifier Built In BX-10 Epicenter Bass Enhancer
Soundstream BXT1.10000D 10000W Monoblock Amplifier Built-In BX-10 Bass Enhancer. Direct Short, Thermal, & Overload Circuits Protect Amplifier. Digital Bass. Quality sound processing is necessary for those who want the most out of their car audio system. Bass Xtreme amplifiers offer similar sound processing options by including the functions of a Bass Reconstruction Processor. Bass Processor boosts lower frequency harmonics that have been compressed or removed from today’s music recordings and are commonly added in-line before subwoofer amplifiers. Dial in the exact sound you want by tuning the frequency to boost, then increase the bandwidth range from that frequency to stimulate the harmonics around it. After slight adjustments, your audio system can sound like audio professionals have tuned it. Unlock and restore the bass from any system with Bass Xtreme Amplifiers.
It works great for music or factory radios that forget we enjoy bass response in our systems! No Problem! EDM, Banda, Rock, Jazz…
General Features:
Digital Bass Reconstruction Processor Built-in
Adds Impact to Music w/ Insufficient Sub Bass
27Hz-63Hz Variable Center/Sweep Frequency
Variable Q/Width to Broaden or Narrow the Bandwidth
2.5V-10V Output Voltage for Optimum Bass Tuning
LED MAX BASS Indicators Warning of Extreme Levels
1-ohm Minimum Impedance Monoblock Operation
Bridge 2 Monoblocks Together for Double Power!
MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
Military Grade SMT PCB Maintains Dynamic Performance
Direct Short, Thermal, & Overload Circuits Protect Amplifier
200mV-6V High Level or Low-Level RCA Input & Output
Variable 12dB Low Pass Crossover Blocks High Frequencies
Variable 12dB Subsonic Crossover Protects Subwoofer
1800 Phase Shift to Match Polarity of System Speakers
Dash Mount Gain Control Module Included
Power Handling:
1,400W x 1 at 4-Ohm Mono
2,100W x 1 at 2-Ohm Mono
3,300W x 1 at 1-Ohm Mono
10,000W Max Power
Variable 40-150Hz 12dB Low Pass Crossover
Variable 10-50Hz 12dB Subsonic Crossover
Selectable 180degree Phase Shift
Total Harmonic Distortion: < 0.3%
Frequency Response: 15-500Hz
Signal-to-Noise Ratio: 105dB
Input Sensitivity: 200mV - 6V
Dimensions: 7.50" W x 2.25" H x 19.25" L
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Hifonics ZD-1350.1D 1350 Watt Mono Amplifier 1 Ohm Car Audio Class-D Amp + 0 Gauge Amp Kit
$179.95
$250.00
Hifonics ZD-1350.1D 1350 Watt Mono Amplifier 1 Ohm Car Audio Class-D Amp + Absolute KIT0 0 Gauge Amp kit
Hifonics ZD-1350.1D ZEUS DELTA Compact 1300 Watt Super D-Class Mono Block Amplifier.
General Features:
Class D Stable Monoblock Amplifier
RMS Power Rating @ 4 ohms: 1350 watts x 1 channel
RMS Power Rating @ 2 ohms: 675 watts x 1 channel
RMS Power Rating @ 1 ohm: 350 watts x 1 channel
Onboard electronic crossover
Pulse Width Modulated MOSFET power supply
Modern Design Hifonics Heat Sink for Superior Heat Dissipation
LED Power/Protect Light
Wired remote bass level control included
Soft start turn-on
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Frequency Response: 15 - 250 Hz
Total Harmonic Distortion (THD): <0.1%
Variable low-pass filter: 50 - 250 Hz
Subsonic filter: 15 - 40 Hz
Variable Bass Boost: 0 - 12 dB
4 AWG gauge power and ground wiring is recommended for installation.
Dimensions: 6.89" W x 13.19" L x 3.15" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Hifonics ZD-1350.1D 1350 Watt Mono Amplifier 1 Ohm Car Audio Class-D Amp + 4 Gauge Amp Kit
$169.95
$250.00
Hifonics ZD-1350.1D 1350 Watt Mono Amplifier 1 Ohm Car Audio Class-D Amp + Absolute KIT4 4 Gauge Amp kit
Hifonics ZD-1350.1D ZEUS DELTA Compact 1300 Watt Super D-Class Mono Block Amplifier.
General Features:
Class D Stable Monoblock Amplifier
RMS Power Rating @ 4 ohms: 1350 watts x 1 channel
RMS Power Rating @ 2 ohms: 675 watts x 1 channel
RMS Power Rating @ 1 ohm: 350 watts x 1 channel
Onboard electronic crossover
Pulse Width Modulated MOSFET power supply
Modern Design Hifonics Heat Sink for Superior Heat Dissipation
LED Power/Protect Light
Wired remote bass level control included
Soft start turn-on
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Frequency Response: 15 - 250 Hz
Total Harmonic Distortion (THD): <0.1%
Variable low-pass filter: 50 - 250 Hz
Subsonic filter: 15 - 40 Hz
Variable Bass Boost: 0 - 12 dB
4 AWG gauge power and ground wiring is recommended for installation.
Dimensions: 6.89" W x 13.19" L x 3.15" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Hifonics ZD-1350.1D 1350 Watt Mono Amplifier 1 Ohm Car Audio Class-D Amp
$149.95
$250.00
Hifonics ZD-1350.1D 1350 Watt Mono Amplifier 1 Ohm Car Audio Class-D Amp
Hifonics ZD-1350.1D ZEUS DELTA Compact 1300 Watt Super D-Class Mono Block Amplifier.
General Features:
Class D Stable Monoblock Amplifier
RMS Power Rating @ 4 ohms: 1350 watts x 1 channel
RMS Power Rating @ 2 ohms: 675 watts x 1 channel
RMS Power Rating @ 1 ohm: 350 watts x 1 channel
Onboard electronic crossover
Pulse Width Modulated MOSFET power supply
Modern Design Hifonics Heat Sink for Superior Heat Dissipation
LED Power/Protect Light
Wired remote bass level control included
Soft start turn-on
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Frequency Response: 15 - 250 Hz
Total Harmonic Distortion (THD): <0.1%
Variable low-pass filter: 50 - 250 Hz
Subsonic filter: 15 - 40 Hz
Variable Bass Boost: 0 - 12 dB
4 AWG gauge power and ground wiring is recommended for installation.
Dimensions: 6.89" W x 13.19" L x 3.15" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.