Monoblock Amplifiers (236)

Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier The KTA-200M fits in the open space behind Alpine’s iLX-W670 or iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W670 (1.9-inch D), occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier in a compact size, easy installation, and overall power. While designed to “stack” behind the iLX-W670 iLX-W650, or similar 2-DIN radio, both amplifiers can also be used as standalone solutions in vehicles that don’t have space for a traditional amplifier. The KTA-200M produces 400 watts with Alpine’s DPP technology. During powerful or “dynamic” passages of music, DPP will adapt to the music's needs by adjusting the amplifier's gain and delivering bursts of power that match the peak demands of the music. Alongside that is the new voltage-adapting input circuit to maintain the maximum source signal level without clipping. General Features: Power Stack capable with the Alpine iLX-W670 iLX-W650 compact mono subwoofer amplifier Alpine’s Class D Amplifier Circuit with DPP Dynamic Peak Power (DPP) technology adds a burst of power when needed CTA-2006 compliant 100W x 1 RMS @ 4Ω, Power Outputs 200W x 1 RMS @ 2Ω, Power Outputs 400W x 1 DPP @ 4Ω, Power Outputs Signal to Noise Ratio 85dB (ref. 1W into 4Ω) ≤0.1% THD+N (ref. 10W into 2Ω) Single-side 22-pin connector selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave) preamp and speaker-level inputs RCA inputs (selectable, Low range=0.2-4V) Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable) wiring, hardware, and fuse not included with the amplifier Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver Authorized Dealer 1-year Warranty What is in the KTA-200M package: KTA-200M Owner's Manual Mono amplifier 12" Input/Output/Power harness 1 Head unit (iLX-W650) mounting bracket 2 Universal mounting brackets Four M5x6mm Allen head machine screws (3mm) Two M2.6x8mm Machine screws Four 3/8" Screws Warranty information Online product registration information FCC Compliance Statement Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DMD1000.1D 1-Channel 1000W RMS Digital Amplifier GENERAL INFORMATION DMD series amplifiers from Diamond Audio provide best-in-class performance for the value, period! DMD series amplifiers provide substantial power in a very small footprint heat sink, which is the solution for any budget-friendly mobile audio sound system. DMD series comprises five amplifier models: one 4-channel, three mono-channel, and one 6-channel amplifier to select from. 1 Channel Mono Block Digital Amplifier 1000W x 1CH @ 2Ω / 680W x 1CH @ 4Ω RMS Power Output Input Sensitivity: 0.2-10 Volt Crossover Filter : 50-250Hz (LPF), 24dB Per Octave Slope Frequency Response: 20-500Hz Signal to Noise Ratio: > 90dB Bass Boost: 0-18dB Overall Operation Efficiency: >88% Selectable REM / VOX / DC Turn On Modes Variable Phase Adjustment Dimensions: 8.0” x 6.85” x 1.9” / 203.1 x 174 x 48.4 mm Remote Bass Knob Included ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DMD500.1D 1-Channel 500W RMS Digital Amplifier GENERAL INFORMATION DMD series amplifiers from Diamond Audio provide best-in-class performance for the value, period! DMD series amplifiers provide substantial power in a very small footprint heat sink, which is the solution for any budget-friendly mobile audio sound system. DMD series comprises five amplifier models: one 4-channel, three mono-channel, and one 6-channel amplifier to select from. 1 Channel Mono Block Digital Amplifier 500W x 1CH @ 2Ω / 340W x 1CH @ 4Ω RMS Power Output Input Sensitivity: 0.2-10 Volt Crossover Filter : 50-250Hz (LPF), 24dB Per Octave Slope Frequency Response: 20-500Hz Signal to Noise Ratio: > 90dB Bass Boost: 0-18dB Overall Operation Efficiency: >88% Selectable REM / VOX / DC Turn On Modes Variable Phase Adjustment Dimensions: 7.2” x 6.85” x 1.9” / 183.1 x 174 x 48.4 mm Remote Bass Knob Included ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DMD250.1D 1-Channel 250 RMS Digital Amplifier GENERAL INFORMATION DMD series amplifiers from Diamond Audio provide best-in-class performance for the value, period! DMD series amplifiers provide substantial power in a small-footprint heat sink, which is the solution for any budget-friendly mobile audio sound system. DMD series comprises five amplifier models: one 4-channel, three mono-channel, and one 6-channel amplifier to select from. 1 Channel Mono Block Digital Amplifier 250W x 1CH @ 2Ω / 160W x 1CH @ 4Ω RMS Power Output Input Sensitivity: 0.2-10 Volt Crossover Filter : 50-250Hz (LPF), 24dB Per Octave Slope Frequency Response: 20-500Hz Signal to Noise Ratio: > 90dB Bass Boost: 0-18dB Overall Operation Efficiency: >88% Selectable REM / VOX / DC Turn On Modes Variable Phase Adjustment Dimensions: 6.42” x 6.85” x 1.9” / 163.1 x 174 x 48.4 mm Remote Bass Knob Included ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio MICRO81U 1-Channel Full Range Class D Sub Amplifier GENERAL FEATURES  Diamond Audio continues to break new dimensions by introducing the MICRO8U amplifiers. Following in the footsteps of the highly popular MICRO series amplifiers, the big-brother MICRO8U series packs more power and performance! Power Output: 300W RMS x 1CH @ 2Ω / 175W RMS x 1CH @ 4Ω Input Sensitivity: 0.2-10 Volt Crossover Filter: 40-400Hz (LPF), 24dB Per Octave Slope Frequency Response: 10-350Hz Selectable REM / VOX / DC Turn-On Modes Dimensions: 9" x 4.06" x 1.52" (228.6 x 103.124 x 38.608 mm) Remote Bass Knob Included Disconnected RCA Input Harness Kits Included ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 Diamond Audio DES1000.5D 5-Channel 1000W RMS Full Range Class D Amplifier Introducing the Diamond Elite DES Series Amplifiers – our flagship line that has set the standard since its debut last year. Engineered and designed from the ground up, these amplifiers are more compact than previous generations while maintaining consistent footprint dimensions across all models. This meticulous design ensures the Diamond Elite DES Series amplifiers deliver even more dynamic sound and optimal rated power at all impedance levels. Each amplifier in the Diamond Elite DES Series boasts advanced features, including multiple switched speaker-level turn-on options (VOX/DC Offset/REM) and the latest digital chipset technology. These innovations offer unparalleled installation flexibility and the precise controls necessary to fine-tune and enhance the sound quality of any car audio system. General Features: Diamond Audio Elite Series Class D 2 ohm Stable 5-Channel Amplifier 4 Ohms RMS Power Rating: 90 watts x 4 channel + 150 watts x 2 channel 2 Ohms RMS Power Rating: 150 watts x 4 channel + 250 watts x 1 channel Bridged Power Rating: 300 watts x 2 channel + 500 watts x 1 channel @ 4 ohm Total power output: 1100 watts LED Power/Protect Light Surface mount component technology with 4-layer PCB Compact size with single-sided connections Speaker-level (high-level) inputs via direct connection of speaker wire to low-level inputs Switched speaker level turn on options (Vox/DC Offset/Rem) Input sensitivity Frequency Response: 10 - 350 Hz Total Harmonic Distortion (THD): 0.03% Signal to Noise Ratio: -76.7 dB Variable high-pass filter: 35 - 350 Hz Variable low-pass filter: 35 - 350 Hz Variable Bass Boost: 0 - 12 dB Fuse Rating: 40A x 3  4 AWG gauge power and ground wiring is recommended for installation. Dimensions: 7.67" W x 12.6" L x 2" H Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

  Diamond Audio DES1000.1D DES 1-Channel Full Range Class D Amplifier Diamond Elite DES series amplifiers have been our work horse ever since its introduction. It was engineered and designed from the ground up. Smaller than the previous generation and constructed with the same footprint dimensions for all models, these amplifiers have been engineered to sound even more dynamic and to deliver optimal rated power at all impedance levels! A ll Diamond Elite DES series amplifiers feature various switched speaker level turn on options (VOX/DC Offset/REM), utilize the latest digital chipset technology, and provides installation flexibility and all the controls necessary to fine-tune and improve the sound quality of any car audio system. General Features 800X1 @ 4Ω RMS 1000X1 @ 2Ω and 1Ω RMS S/N: < -100dBA Dimensions: (Remote Included): 11.81" x 2" x 7.25" (300mm x 50.8mm x 185mm) Latest High-Efficiency Full Range Digital Topology Surface Mount Component Technology with 4-Layer PCB Common Compact Size with Single-Sided Connections and Top Mount Controls Handles HI and LO level input up to 12V Switched Speaker Level Turn On Options (VOX/DC Offset/REM) Remote Bass Level Control Included Fully Variable 35Hz - 350Hz 12dB per Octave Crossovers 0 -180 Degrees of Phase adjustment Bass Boost EQ Up To 12dB ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DES500.1D DES 1-Channel Full Range Class D Amplifier Diamond Elite DES series amplifiers have been our workhorse since their introduction last year when it was engineered and designed from the ground up. Smaller than the previous generation and constructed with the same footprint dimensions for all models, these amplifiers have been engineered to sound even more dynamic and to deliver optimal rated power at all impedance levels! An ll Diamond Elite DES series amplifiers feature various switched speaker level turn-on options (VOX/DC Offset/REM), utilize the latest digital chipset technology, and provide installation flexibility and all the controls necessary to fine-tune and improve the sound quality of any car audio system. General Features Latest High-Efficiency Full-Range Digital Topology Surface Mount Component Technology with 4-Layer PCB Common Compact Size with Single-Sided Connections and Top Mount Controls Handles HI and LO level input up to 12V Switched Speaker Level Turn On Options (VOX/DC Offset/REM) Remote Bass Level Control Included Fully Variable 35Hz - 350Hz 12dB per Octave Crossovers 0 -180 Degrees of Phase adjustment Bass Boost EQ Up To 12dB ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio HX1200.1D HEX Series Monoblock Class-D Car Audio Amplifier + Absolute KIT0 0 Gauge Amplifier It is introducing the all-new range of Diamond Audio HEX series amplifiers, made for ultimate sound quality and performance. It features a four-layer glass epoxy circuit board, top-mounted controls, and a brushed copper look exterior, making it great for a show car. General Features: Anodized Extruded Aluminum Heat Sink provides superior thermal performance 4-Layer PCB Board with balanced differential inputs Full Range Class D IR Chipset "Snap" capacitors are used throughout the circuit Audiophile Grade High Tolerance Components Spring Steel FET Clips provide a cleaner board design Illuminated logo / fully concealed mounting Output clip indicators for precise setup Fine-tuned fully variable crossovers and phase control Top-mounted controls for convenient amplifier adjustment Monoblock Class-D Amplifier RMS Power Rating: 4 Ohm: 540 watts x 1 Channel RMS Power Rating: 2 Ohm: 870 watts x 1 Channel RMS Power Rating: 1 Ohm: 1200 watts x 1 Channel Frequency Response: 10Hz - 300Hz Variable Low-Pass Filter (12dB/Octave): 30Hz - 300Hz Variable Sub-Sonic Filter (12dB/Octave): 10Hz - 55Hz Top Mounted Controls Anodized Extruded Aluminum Heat Sink 4-Layer PCB Board Balanced Differential Inputs Illuminated Logo Dimensions: 14.2" (362mm) x 7.67" (195mm) x 2" (51.5mm) 1-Year Warranty What is Included? One (1) Diamond Audio HX1200.1D HEX Series Monoblock Class-D Car Audio Amplifier ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio HX800.1D HEX Mono 800W RMS Class D Subwoofer Amplifier. Audiophile-grade high tolerance components - 4-layer PCB board with balanced differential inputs - full-range digital class-d Ir chip sets - fine-tuned variable - crossover and phase control- top mounted controls for convenient amplifier adjustment turn to hex series amplifiers for superior sound quality and unparalleled power for the ultimate audiophile system set up. Composed of high-tolerance grade components and tuning adjustments to fit your listening desires, hex series amplifiers are the choice for those who expect the best! General Features RMS Power Rating: 340 W x 1 @ 4Ω RMS Power Rating: 560 W x 1 @ 2Ω RMS Power Rating: 800 W x 1 @ 1Ω S/N: ≤ 95 dBA / THD: .06% Dimensions: (Remote Included): 9.92" x 7.67" x 2" (252 x 195 x 51.5 mm) Anodized Extruded Aluminum Heat Sink Provides Superior Thermal Performance 4-Layer PCB Board with Balanced Differential Inputs Full Range Class D IR Chipset "SNAP" Capacitors used Throughout the Circuit Audiophile Grade High Tolerance Components Spring Steel FET Clips Provide a Cleaner Board Design Illuminated Logo / Fully Concealed Mounting Output Clip Indicators for Precise Set-Up Fine Tuned Fully Variable Crossovers and Phase Control Top Mounted Controls for Convenient Amplifier Adjustment ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.