Monoblock Amplifiers (203)

 ORION CBA4500.1D COBALT Series 4500 Watt MAX 1-Channel Class D Amplifier Are you looking for a high-powered amplifier that brings unbeatable bass performance with efficiency and control? The Orion CBA4500.1D COBALT Series 4500-Watt Monoblock Amplifier is designed to deliver powerful, detailed bass, perfect for enthusiasts seeking intense audio experiences. With 4500 watts of peak power and Class D technology, this amp offers clear, punchy bass in a compact design, perfect for installation with limited room and high-performance setups. One of the CBA4500.1D’s standout features is its advanced tuning options, including adjustable bass boost and a precision low-pass crossover. These features allow you to fine-tune your system and maximize performance, giving you full control over every beat and bassline. Whether you’re building a new system or upgrading your current setup, this amp is engineered to elevate your listening experience. Designed with durability in mind, the CBA4500.1D includes advanced protection circuitry to safeguard against overheating and electrical faults, ensuring long-lasting performance under high power. Its compact design not only saves space but also provides optimal heat dissipation, so you can push your system to its limits without compromising on reliability. Perfect for systems that need a serious boost in lower frequencies, the Orion CBA4500.1D delivers bold, immersive bass that transforms any audio setup. This amp provides deep, resonant low-end sound that brings every beat to life. Whether you’re cruising down the highway or displaying your setup at car meets, this amplifier offers high-impact, head-turning audio that elevates your listening experience. Key Features:     Efficient Class D Power: Unlock high-efficiency, precision bass with advanced Class D amplification, delivering crisp and powerful audio output that enhances every detail of your music.     Massive 4500-Watt Output: Immerse yourself in an intense bass experience with a peak power of 4500 watts, delivering deep bass and dynamic soundscapes designed to elevate your audio system.     Precision Tuning: The adjustable crossover enables seamless frequency control, allowing you to fine-tune audio output and optimize speaker performance for an enhanced listening experience.     Enhanced Bass Control: Customize your sound with adjustable bass boost, allowing you to amplify low-end frequencies for rich, resonant bass that makes every beat stand out.     Robust Protection: Advanced circuitry defends against overheating and short circuits, enhancing durability for reliable, long-term performance and providing peace of mind during high-power use.     Compact Build: Its space-saving design offers flexible installation without sacrificing performance.     Engineered for Reliability: Thoughtfully designed for lasting performance and power efficiency in any audio setup.     All MOSFET Power Supply & Output Stage     Heavy Gauge / High Current Custom Power and Speaker Terminals     1-Ohm Stable     Remote Gain Controller Included     RCA Out Throughput     12dB Octave Low-Pass Filter     Electronic Crossover Network     Bass Boost Circuit     Intelligent Power and Protection LED Indicator     Soft Turn-on/Turn-off     Turn-On Delay     Fault and Protection Monitoring     4-Way Protection: Thermal, DC offset, Short Protection, under & over voltage     -Max Music Power: 4500W     POWER TERMINAL MANAGEMENT     Positive Terminals: 1 x 4 AWG.     Negative Terminals: 1 x 4 AWG.     Remote Turn-ON Signal: 10 AWG.     Speaker Output Terminals: 10 AWG. Specifications:     Frequency Response: 10Hz - 250Hz     Subsonic (15 - 50Hz)     Low Pass Crossover Continuously variable (40-250Hz)     Supply Voltage: 10 - 16V     Input Impedance: 22kOhm     Signal to Noise Ratio: >90dB     Phase Shift: 0/180 Degrees     Bass Boost: 0 - 12dB Variable     Variable Input Level Control: 0.2V - 6.0V     Fuses: 105A recommended (3 x 35A ATC)     Dimensions (L x W x H): 12.56" x 7.09" x 2.13" (319x180x54mm) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ORION CBA3000.1D COBALT Series 3000 Watt MAX 1-Channel Class D Amplifier Are you looking for a high-powered amplifier that brings unbeatable bass performance with efficiency and control? The Orion CBA3000.1D COBALT Series 3000-Watt Monoblock Amplifier is designed to deliver powerful, detailed bass, perfect for enthusiasts seeking intense audio experiences. With 3000 watts of peak power and Class D technology, this amp offers clear, punchy bass in a compact design, perfect for installation with limited room and high-performance setups. One of the CBA3000.1D’s standout features is its advanced tuning options, including adjustable bass boost and a precision low-pass crossover. These features allow you to fine-tune your system and maximize performance, giving you full control over every beat and bassline. Whether you’re building a new system or upgrading your current setup, this amp is engineered to elevate your listening experience. Designed with durability in mind, the CBA3000.1D includes advanced protection circuitry to safeguard against overheating and electrical faults, ensuring long-lasting performance under high power. Its compact design not only saves space but also provides optimal heat dissipation, so you can push your system to its limits without compromising on reliability. Perfect for systems that need a serious boost in lower frequencies, the Orion CBA3000.1D delivers bold, immersive bass that transforms any audio setup. This amp provides deep, resonant low-end sound that brings every beat to life. Whether you’re cruising down the highway or displaying your setup at car meets, this amplifier offers high-impact, head-turning audio that elevates your listening experience. Key Features:     Efficient Class D Power: Unlock high-efficiency, precision bass with advanced Class D amplification, delivering crisp and powerful audio output that enhances every detail of your music.     Massive 3000-Watt Output: Immerse yourself in an intense bass experience with a peak power of 3000 watts, delivering deep bass and dynamic soundscapes designed to elevate your audio system.     Precision Tuning: The adjustable crossover enables seamless frequency control, allowing you to fine-tune audio output and optimize speaker performance for an enhanced listening experience.     Enhanced Bass Control: Customize your sound with adjustable bass boost, allowing you to amplify low-end frequencies for rich, resonant bass that makes every beat stand out.     Robust Protection: Advanced circuitry defends against overheating and short circuits, enhancing durability for reliable, long-term performance and providing peace of mind during high-power use.     Compact Build: Its space-saving design offers flexible installation without sacrificing performance.     Engineered for Reliability - Thoughtfully designed for lasting performance and power efficiency in any audio setup.     All MOSFET Power Supply & Output Stage     Heavy Gauge / High Current Custom Power and Speaker Terminals     1-Ohm Stable     Remote Gain Controller Included     RCA Out Throughput     12dB Octave Low-Pass Filter     Electronic Crossover Network     Bass Boost Circuit     Intelligent Power and Protection LED Indicator     Soft Turn-on/Turn-off Turn-On Delay     Fault and Protection Monitoring     4-Way Protection: Thermal, DC offset, Short Protection, under & over voltage     -Max Music Power: 3000W     POWER TERMINAL MANAGEMENT     Positive Terminals: 1 x 4 AWG.     Negative Terminals: 1 x 4 AWG.     Remote Turn-ON Signal: 10 AWG.     Speaker Output Terminals: 10 AWG. Specifications:     Frequency Response: 10Hz - 250Hz     Subsonic (15 - 50Hz)     Low Pass Crossover Continuously variable (40-250Hz)     Supply Voltage: 10 - 16V     Input Impedance: 22kOhm     Signal to Noise Ratio: >90dB     Phase Shift: 0/180 Degrees     Bass Boost: 0 - 12dB Variable     Variable Input Level Control: 0.2V - 6.0V     Fuses: 70A recommended (2 x 35A ATC)     Dimensions (L x W x H): 11.77" x 7.09" x 2.13" (299x180x54mm) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ORION CBA2000.1D COBALT Series 2000 Watt MAX 1-Channel Class D Amplifier Are you looking for a high-powered amplifier that brings unbeatable bass performance with efficiency and control? The Orion CBA2000.1D COBALT Series 2000-Watt Monoblock Amplifier is designed to deliver powerful, detailed bass, perfect for enthusiasts seeking intense audio experiences. With 2000 watts of peak power and Class D technology, this amp offers clear, punchy bass in a compact design, perfect for installation with limited room and high-performance setups. One of the CBA2000.1D’s standout features is its advanced tuning options, including adjustable bass boost and a precision low-pass crossover. These features allow you to fine-tune your system and maximize performance, giving you full control over every beat and bassline. Whether you’re building a new system or upgrading your current setup, this amp is engineered to elevate your listening experience. Designed with durability in mind, the CBA2000.1D includes advanced protection circuitry to safeguard against overheating and electrical faults, ensuring long-lasting performance under high power. Its compact design not only saves space but also provides optimal heat dissipation, so you can push your system to its limits without compromising on reliability. Perfect for systems that need a serious boost in lower frequencies, the Orion CBA2000.1D delivers bold, immersive bass that transforms any audio setup. This amp provides deep, resonant low-end sound that brings every beat to life. Whether you’re cruising down the highway or displaying your setup at car meets, this amplifier offers high-impact, head-turning audio that elevates your listening experience. Key Features:     Efficient Class D Power: Unlock high-efficiency, precision bass with advanced Class D amplification, delivering crisp and powerful audio output that enhances every detail of your music.     Massive 2000-Watt Output: Immerse yourself in an intense bass experience with a peak power of 2000 watts, delivering deep bass and dynamic soundscapes designed to elevate your audio system     Precision Tuning: The adjustable crossover enables seamless frequency control, allowing you to fine-tune audio output and optimize speaker performance for an enhanced listening experience.     Enhanced Bass Control: Customize your sound with adjustable bass boost, allowing you to amplify low-end frequencies for rich, resonant bass that makes every beat stand out.     Robust Protection: Advanced circuitry defends against overheating and short circuits, enhancing durability for reliable, long-term performance and providing peace of mind during high-power use.     Compact Build: Its space-saving design offers flexible installation without sacrificing performance.     Engineered for Reliability - Thoughtfully designed for lasting performance and power efficiency in any audio setup.     All MOSFET Power Supply & Output Stage     Heavy Gauge / High Current Custom Power and Speaker Terminals     1-Ohm Stable     Remote Gain Controller Included     RCA Out Throughput     12dB Octave Low-Pass Filter     Electronic Crossover Network     Bass Boost Circuit     Intelligent Power and Protection LED Indicator     Soft Turn-on/Turn-off Turn-On Delay     Fault and Protection Monitoring     4-Way Protection: Thermal, DC offset, Short Protection, under & over voltage     Max Music Power: 2000W     POWER TERMINAL MANAGEMENT     Positive Terminals: 1 x 4 AWG.     Negative Terminals: 1 x 4 AWG.     Remote Turn-ON Signal: 10 AWG.     Speaker Output Terminals: 10 AWG. Specifications:     Frequency Response: 10Hz - 250Hz    Subsonic (15 - 50Hz)    Low Pass Crossover Continuously variable (40-250Hz)    Supply Voltage: 10 - 16V    Input Impedance: 22kOhm    Signal to Noise Ratio: >90dB    Phase Shift: 0/180 Degrees    Bass Boost: 0 - 12dB Variable    Variable Input Level Control: 0.2V - 6.0V    Fuses: 60A recommended (2 x 30A ATC)    Dimensions (L x W x H): 9.92" x 7.09" x 2.13" (252x180x54mm)   Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Hifonics HCC-1500.1D 1500W RMS Class D Monoblock Car Amplifier + Absolute KIT4 4 Gauge Amp kit General Features: COLOSSUS Series Class D 1 ohm Stable Monoblock Amplifier RMS Power Rating: 4 ohm: 375 watts x 1 channel 2 ohm: 750 watts x 1 channel 1 ohm: 1500 watts x 1 channel Total power output: 1500 watts LED Power/Protect Light Wired bass level remote control included Speaker-level (high-level) inputs (Requires an adapter like the Kicker KISL) Thermal, overload, and speaker short protection Low noise preamplifier circuit with minimal distortion Nickel-plated RCA jacks to resist corrosion Variable electronic crossover type An electronic equalizer to tailor specific frequencies Super D-Class designs and a high-speed microprocessor Pro-Fi Output Device Technology: The Ultra-Fi MOSFET Heavy-duty aluminum alloy heat sink Dual-coil pulse-width-modulated power supply High-temperature impact-resistant nickel-plated connectors Secure molded connection terminal for all connections Phase 0-180 degrees: Bass drum attack, snap requires phase Input sensitivity: 0.2 - 9 volts Frequency Response: 10 - 500 Hz Total Harmonic Distortion (THD): 0.1% Variable low-pass filter: 30 - 250 Hz Subsonic filter: 15 - 35 Hz Variable Bass Boost: 0 - 10 dB Fuse Rating: 100A 4 AWG gauge amplifier wiring kit is recommended for installation Dimensions: 17.5" L x 10.75" W x 4.5" H Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Hifonics HCC-1500.1D 1500W RMS Class D Monoblock Car Amplifier General Features: COLOSSUS Series Class D 1 ohm Stable Monoblock Amplifier RMS Power Rating: 4 ohm: 375 watts x 1 channel 2 ohm: 750 watts x 1 channel 1 ohm: 1500 watts x 1 channel Total power output: 1500 watts LED Power/Protect Light Wired bass level remote control included Speaker-level (high-level) inputs (Requires an adapter like the Kicker KISL) Thermal, overload, and speaker short protection Low noise preamplifier circuit with minimal distortion Nickel-plated RCA jacks to resist corrosion Variable electronic crossover type An electronic equalizer to tailor specific frequencies Super D-Class designs and a high-speed microprocessor Pro-Fi Output Device Technology: The Ultra-Fi MOSFET Heavy-duty aluminum alloy heat sink Dual-coil pulse-width-modulated power supply High-temperature impact-resistant nickel-plated connectors Secure molded connection terminal for all connections Phase 0-180 degrees: Bass drum attack, snap requires phase Input sensitivity: 0.2 - 9 volts Frequency Response: 10 - 500 Hz Total Harmonic Distortion (THD): 0.1% Variable low-pass filter: 30 - 250 Hz Subsonic filter: 15 - 35 Hz Variable Bass Boost: 0 - 10 dB Fuse Rating: 100A 4 AWG gauge amplifier wiring kit is recommended for installation Dimensions: 17.5" L x 10.75" W x 4.5" H Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate PM600X4  Punch Marine 600 Watt 4-Channel Amplifier The Punch PM600X4 multi-channel amplifier is versatile to power any audio system configuration. In addition to 4-channel stereo mode, you can bridge both channels to create a high-power 2-channel amp, or run stereo speakers on the front with subwoofers on the rear in 3-channel mode. The variable HP/LP crossover and built-in Punch EQ allow for precise tuning of Bass frequencies, and the pass-through RCA jacks provide flexibility as your system grows, keeping Y-adapters to a minimum.  General Features: Features C.L.E.A.N. Set-up RCA pass-thru outputs 12dB/octave Butterworth crossover Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator) On-board Punch EQ with +18dB boost @ 45Hz High-level input capable of an Auto Turn-On circuit Cast aluminum heatsink Overcurrent protection Stealth top-mounted control panel Muted turn on Marine-grade two-part epoxy coating on circuit boards Marine-grade stainless steel hardware Short circuit protection 2-Year Warranty Number of Channels: 4 Total Power(Sum of Rated Power): 600 Watts Rated Power (RMS Continuous Power) 75 Watts x 4 @ 4-Ohm 150 Watts x 4 @ 2-Ohm 300 Watts x 2 @ 4-Ohm Bridged Dynamic Power (PVC/PowerCube®) 129 Watts x 4 @ 4-Ohms 0° Res 211 Watts x 4 @ 2-Ohms 0° Res Bridgeable: Yes Frequency Response: 20Hz to 20kHz +/- 1.0dB Input Sensitivity: 150 mV - 12 V Circuit Topology Class: Class A/B Efficiency (average): 68% @ 4-Ohm Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0%, 2-Ohm: <1.0% Signal Input: Hi/Low level: 2 RCA pair Signal Output: Low level: 1 RCA pair Tone Controls Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Front Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Rear Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz Function depends upon the LP/AP/HP switch position Crossover Controls Front/Rear High-Pass (HP): 50Hz-250Hz @ 12dB/octave Butterworth Front/Rear Low-Pass (HP): 50Hz-250Hz 12dB/octave Butterworth All-Pass: Yes Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

Rockford Fosgate PM400X2 Punch Marine 400 Watt 4-Channel Amplifier The PM400X4 is perfect for 4-way front-stage/rear-fill or 3-way front-stage/subwoofer systems. Simply drop a pair of component speakers on the front channels and subs on the rear and BOOM - you got "The PUNCH." With its flexible design, the PM400X4 is an excellent amplifier choice for virtually any vehicle. FEATURES AT A GLANCE     Features C.L.E.A.N. Set-up     12dB/octave Butterworth crossover     Over current protection     Muted turn on     On-board Punch EQ with +18dB boost @ 45Hz     High level input capable with Auto Turn-On circuit     Cast aluminum heatsink     Stealth top mounted control panel     Short circuit protection     Marine grade two part epoxy coating on circuit boards     Marine grade stainless steel hardware     2-Year Warranty Number of Channels: 4 Total Power (Sum of Rated Power): 400 Watts Rated Power (RMS Continuous Power) 50 Watts x 4 @ 4-Ohm 100 Watts x 4 @ 2-Ohm 200 Watts x 2 @ 4-Ohm Bridged Dynamic Power (PVC/PowerCube®) 82 Watts x 4 @ 4-Ohm 137 Watts x 4 @ 2-Ohm 266 Watts x 2 @ 4-Ohm Bridged Bridgeable: Yes Frequency Response: 20Hz to 20kHz +/- 1.0dB Input Sensitivity: 150 mV - 12 V Circuit Topology Class: Class A/B Efficiency (average): 67% @ 4-Ohm Total Harmonic Distortion (THD+Noise) 4-Ohm: <1.0% 2-Ohm: <1.0% Signal Input: Hi/Low level: 2 RCA pair Signal Output Tone Controls: Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Front Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Rear Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz Function depends upon LP/AP/HP switch position Crossover Controls Front High-Pass/Low-Pass (HP/LP): 50Hz-250Hz @ 12dB/octave Butterworth Rear High-Pass/Low-Pass (HP/LP): 50Hz-250Hz @ 12dB/octave Butterworth All-Pass: Yes Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

Rockford Fosgate PM300X2 Punch Marine 300 Watt 2-Channel Amplifier The PM300X2 is a solid choice if you're looking to drive a pair of coaxial speakers, component speakers, or a single subwoofer. The amplifier can also be run in stereo/mono mode simultaneously when using passive crossovers (not supplied) on all speakers. With proven PUNCH technology, the PM300X2 delivers real Rockford Fosgate power from a small design and is flexible to accommodate any moderately sized system. FEATURES AT A GLANCE     Features C.L.E.A.N. Set-up     RCA pass-thru outputs     On-board Punch EQ with +18dB boost @ 45Hz     Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)     High level input capable with Auto Turn-On circuit     Cast aluminum heatsink     2-Year Warranty     Over current protection     12dB/octave Butterworth crossover     Marine grade two part epoxy coating on circuit boards     Marine grade stainless steel hardware     Muted turn on     Short circuit protection     Stealth top mounted control panel Number of Channels: 2 Total Power (Sum of Rated Power): 300 Watts Rated Power (RMS Continuous Power) 100 Watts x 2 @ 4-Ohm 150 Watts x 2 @ 2-Ohm 300 Watts x 1 @ 4-Ohm Bridged Dynamic Power (PVC/PowerCube®) 120 Watts x 2 @ 4-Ohms 0° Res 203 Watts x 2 @ 2-Ohms 0° Res Bridgeable: Yes Frequency Response: 20Hz-20kHz Input Sensitivity: 150 mV - 12 V Circuit Topology Class: Class A/B Efficiency (average): 69% @ 4-Ohm Total Harmonic Distortion (THD+Noise) 4-Ohm: <1.0% 2-Ohm: <1.0% Signal Input: Hi/Low Level: 1 RCA Pair Signal Output: Low Level: 1 RCA Pair Tone Controls 0dB to +14dB @ 12.5kHz 0dB to +18dB @ 45Hz Crossover Controls High-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth Low-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth All-Pass: Yes Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

Rockford Fosgate PM1000X1DB 1000 Watts Punch marine/powersports mono amplifier A powerful amp made for powersports Rockford Fosgate built their PM1000X1bd mono amplifier for marine, motorcycle, and powersport applications. If you demand powerful bass while you're blasting along a trail or waterway, this compact amp has all the power you needRockford Fosgate PM1000X1bd The PM1000X1bd features a conformal-coated circuit boardBoost your bass wherever you go Ultra-efficient Class-bd circuit topology helps the PM1000X1bd deliver maximum bang for your buck. This versatile amp will operate safely with loads as low as 1 ohm, so you can send up to 1000 watts RMS to a single dual voice coil sub or to a multi-sub setup.Made for long life and easy installation Product highlights:     mono subwoofer amplifier     300 watts RMS x 1 at 4 ohms (1000 watts peak)     500 watts RMS x 1 at 2 ohms     1000 watts RMS at 1 ohm     CEA-2006 compliant     Class BD amp technology     conformal-coated circuit board — suitable for power sports and marine applications     marine-grade stainless steel hardware     variable low-pass filter (50-250 Hz, 12 dB/octave)     speaker-level inputs (speaker wire to RCA adapter required)     frequency response: 20-250 Hz     built-in Punch EQ with +18dB boost @ 45Hz.     fuse rating: 140A x 1 (fuse not included)     C.L.E.A.N. set-up technology with LED input/output indicators     hidden top-mount control panel     dimensions: 13-3/8"W x 2-7/16"H x 8-13/16"D    What's in the PM1000X1BD shipping: Rockford Fosgate PM1000X1BD owner's manualIf you need assistance accessing this owner's manual, please give us a call.     Mono subwoofer amplifier     2.5mm Allen wrench     Four 1-1/2" Self-tapping screws     Setup guide     Certificate of Performance Verification Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

Hifonics HCC-3000.1D 3000W RMS COLOSSUS Series Class-D Monoblock Amplifier Hifonics COLOSSUS Classic Mono subwoofer audio amplifier delivers 3000 watts with Super D Class technology, featuring Ultra-Fi MOSFET outputs selected for both balance and output power. General Features: COLOSSUS Series Class D 1 ohm Stable Monoblock Amplifier RMS Power Rating: 4 ohm: 750 watts x 1 channel 2 ohm: 1500 watts x 1 channel 1 ohm: 3000 watts x 1 channel Total RMS power output: 3000 watts Designed and engineered in the USA LED Power/Protect Light Wired bass level remote control included Ultra-Fi™ MOSFET Heavy-duty aluminum alloy heat sink Dual-coil Pulse Width Modulated power supply High-temperature impact-resistant High-speed microprocessors with proprietary D/A conversion algorithms The mono output of the pre-amp outputs Signal sensing remote turn-on Protection circuitry (thermal, overload, and speaker short protection) Maximum low voltage signal Input sensitivity: Low level: 0.2 - 9 volts Frequency Response: 10 - 500 Hz Total Harmonic Distortion (THD): <0.1% Variable low-pass filter: 30 - 250 Hz Subsonic filter: 15 - 35 Hz Variable Bass Boost: 0 - 10 dB Fuse Rating: 250A 4 AWG gauge amplifier wiring kit is recommended for installation Dimensions: 18.5" L x 11.25" W x 2.5" H Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Hifonics HCC-4200.1D 4200W Peak Class D COLOSSUS Series Monoblock Car Amplifier with Bass Remote Hifonics COLOSSUS Classic Mono subwoofer audio amplifier delivers 4200 watts with Super D Class technology, featuring Ultra-Fi MOSFET outputs selected for both balance and output power. General Features: COLOSSUS Series Class D 1 ohm Stable Monoblock Amplifier RMS Power Rating: 4 ohm: 1000 watts x 1 channel 2 ohm: 2100 watts x 1 channel 1 ohm: 4200 watts x 1 channel Total power output: 4200 watts LED Power/Protect Light Wired bass level remote control included Thermal, overload, and speaker short protection Low-noise preamplifier circuit with minimal distortion Nickel-plated RCA jacks to resist corrosion Variable electronic crossover type An electronic equalizer to tailor specific frequencies Super D-Class designs and high-speed microprocessor Pro-Fi Output Device Technology: The Ultra-Fi MOSFET Heavy-duty aluminum alloy heat sink Dual-coil Pulse Width Modulated power supply High-temperature impact-resistant nickel-plated connectors Secure molded connection terminal for all connections Phase 0-180 degrees: Bass drum attack, snap requires phase Input sensitivity: 0.2 - 9 volts Frequency Response: 10 - 500 Hz Total Harmonic Distortion (THD): 0.1% Variable low-pass filter: 30 - 250 Hz Subsonic filter: 15 - 35 Hz Variable Bass Boost: 0 - 10 dB Fuse Rating: 300A 4 AWG gauge amplifier wiring kit is recommended for installation Dimensions: 22.75" L x 10.75" W x 4.5" H Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Hifonics ZD-1950.1D 1950W Peak Class D Zeus Delta Series Monoblock Car Amplifier + Absolute KIT4 4 Gauge Amp Kit Hifonics ZEUS DELTA monoblock amplifier delivers 1950 watts, featuring a PWM MOSFET power supply for maximum current levels. General Features: Zeus Series Class D 1 ohm Stable Monoblock Amplifier RMS Power Rating: 4 ohm: 450 watts x 1 channel 2 ohm: 975 watts x 1 channel 1 ohm: 1950 watts x 1 channel Total RMS power output: 1950 watts LED Power/Protect Light Signal sensing remote turn-on Thermal, overload, and speaker short protection Low-noise preamplifier circuit and minimal distortion Nickel-plated, high-temperature, impact-resistant Mono operation mode only Onboard electronic crossover type PWM MOSFET power supply for minimal heat An aluminum heat sink for superior heat dissipation Simpatico coil design for constant power supply Secure molded connection terminal for all connections Input sensitivity: 0.2 - 6 volts Frequency Response: 15 - 250 Hz Total Harmonic Distortion (THD): 0.1% Variable low-pass filter: 50 - 250 Hz Subsonic filter: 15 - 40 Hz Variable Bass Boost: 0 - 12 dB Fuse Rating: 100A 4 AWG gauge amplifier wiring kit is recommended for installation Dimensions: 15.94" L x 6.89" W x 3.15" H Authorized Internet Dealer 1-year Manufacturer's Warranty MFR #: ZD-1950.1D Warning:This product can expose you to chemicals known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.