Completed Products – Page 542

Absolute CAMPACK-700 7" LCD Rear View Mirror Monitor Car Monitor + IR Night Vision Car Camera Parking Assistance System Kit $89.99 $149.99

Absolute CAMPACK-700 7.0 Inches TFT/LCD Rear View Mirror Monitor with Rear View Night Vision Camera Absolute CAMPACK-700 7.0 Inches TFT/LCD Rear View Mirror Monitor with Rear View Night Vision Camera 7.0 Inches TFT LCD Rear view mirror Monitor with rearview Night vision camera Aspect Ratio 16:9 Wide Screen Output Standard PAL NTSC Video Input System AV1 AV2 Monitor Features: 1 Absolute MIR-73 7" TFT LCD Color Monitor/ Rear-View Mirror Rear-view Mirror with Monitor Built-in 7" TFT LCD Monitor Dual video inputs PAL/NTSC Compatible Resolution:480 x R.G.B. x 234 pixels Auto switching for color systems (PAL and NTSC) Requires a 12V DC power supply When powered off, the display becomes a full mirror OSD (On-Screen Display) menu for customization Includes a wireless remote control Dimensions: 9-7/8"W x 1"D x 4-1/2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Camera Features: 1 Absolute CAM-600 Wide Angle Rear View CMD Color Back UP Camera with Infrared Night Vision License Plate Mount Finish: Black color Universal rearview camera (reversed image) System: NTSC Designed for night vision applications (infrared LED) Camera built into the water-resistant case Waterproof: IP67- IP68 Resolution: 420 lines Scanning System: 2:1 Interlace Effective Pixel: 510x462 pixels Electronic Shutter: 1/60-1/15,000 sec. Minimum Illumination: 0.2Lux/F1.8 (0 lux with LED) Power Range: 10.5 -14.4 volts Video output:1.0Vp-p, 75 Ohms Lens: 2.8mm / 120 Degrees Angle View S/N ratio of more than 48 dB 120* Degree Wide viewing angle Video connection with RCA composite cable Requires power and ground for operation Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-49% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Metra 70-2103 MALIBU EQUINOX G6 04-UP Car Stereo Wiring Harness $14.99 $28.99

Metra 70-2103 Wiring Harness Plugs into Factory Harness for 04-05 Chevy Malibu/Pontiac G6 CHEVROLET COMPATIBILITY: 2005 - 2006 Cobalt 2005 - 2006 Equinox 2004 - 2007 Malibu 2004 - 2007 Malibu Maxx PONTIAC COMPATIBILITY: 2005 - 2008 G6 2006 Torrent General Features: Plugs into car harness The harness does not supply an ignition source, and all factory warning chimes will no longer function. OnStar features will also be lost Compatible with 2004-2009 Chevrolet, Pontiac Allows for the installation of an aftermarket radio using the existing factory wiring and connectors No cutting of factory wiring needed 1-year Manufacturer's warranty Connections: Yellow - 12V Constant Red - 12V Accessory Black - Ground Orange - Dash Light Dimmer/Illumination Green - Left Rear Speaker (+) Green with Black Stripe Left Rear Speaker (-) White - Left Front Speaker (+) White with Black Stripe - Left Front Speaker (-) Purple - Right Rear Speaker (+) Purple with Black Stripe - Right Rear Speaker (-) Gray - Right Front Speaker (+) Gray with Black Stripe - Right Front Speaker (-)

-49% sale

00
DAYS 00
HRS 00
MIN 00
SEC

70-2103 STEREO CD PLAYER AFTERMARKET RADIO WIRING HARNESS SELECT CHEVY PONTIAC $14.99 $28.99

Metra 70-2103 Wiring Harness Plugs into Factory Harness for 04-05 Chevy Malibu/Pontiac G6 CHEVROLET COMPATIBILITY: 2005 - 2006 Cobalt 2005 - 2006 Equinox 2004 - 2007 Malibu 2004 - 2007 Malibu Maxx PONTIAC COMPATIBILITY: 2005 - 2008 G6 2006 Torrent General Features: Plugs into car harness The harness does not supply an ignition source, and all factory warning chimes will no longer function. OnStar features will also be lost Compatible with 2004-2009 Chevrolet, Pontiac Allows for the installation of an aftermarket radio using the existing factory wiring and connectors No cutting of factory wiring needed 1-year Manufacturer's warranty Connections: Yellow - 12V Constant Red - 12V Accessory Black - Ground Orange - Dash Light Dimmer/Illumination Green - Left Rear Speaker (+) Green with Black Stripe Left Rear Speaker (-) White - Left Front Speaker (+) White with Black Stripe - Left Front Speaker (-) Purple - Right Rear Speaker (+) Purple with Black Stripe - Right Rear Speaker (-) Gray - Right Front Speaker (+) Gray with Black Stripe - Right Front Speaker (-)

Sold out -21% sale

AXSWC Axxess Universal Steering Wheel Control Interface Alpine Kenwood Pioneer

00
DAYS 00
HRS 00
MIN 00
SEC

AXSWC Axxess Universal Steering Wheel Control Interface Alpine Kenwood Pioneer $79.99 $99.99

Metra Axxess AXSWC Universal Steering Wheel Control Interface AXSWC One Interface to Control Them AllFinally, a simple solution to retaining the steering wheel controls of a vehicle when installing an aftermarket stereo—introducing the Axxess ASWC from Metra Electronics. This universal steering wheel interface is brand new and designed to simplify the installer's life. Unlike other steering wheel interfaces, the ASWC-1 requires no manual programming. After making all the proper connections, this interface will automatically program itself with the new stereo and the vehicle—no more tedious programming of each button. The ASWC-1 has an LED status light that will flash according to the programming and inform you when the sync is done. It is simple. Just plug it in, and you are ready to go! Now installations can be faster, easier, and simpler! If you still prefer to do the programming manually, Axxess has left that as an option.Ready for Any Aftermarket StereoNo matter what type of vehicle or aftermarket stereo you plan to install, the ASWC-1 has you covered! It is fully compatible with Pioneer, Sony, Alpine, Kenwood, Eclipse, JVC, and more. As long as the stereo has a wired steering wheel remote connection, the ASWC-1 will connect and interface with the vehicle. Plus, the Metra ASWC-1 can be updated. This means that the interface will never be outdated. For the simplest way to retain the steering wheel control in your car, choose the Axxess ASWC-1!General Features: Universal Steering Wheel Control Interface for Aftermarket Receivers Model: AXSWC Does not require any programming Works with the 2013 Nissan Altima sedan Car stereo requires a wired steering wheel remote input Can be manually programmed to function the way that the user wants the device to function Designed for use with Pioneer, Sony, Alpine, Kenwood, Eclipse, JVC, Clarion, Jensen, Dual, Power Acoustik, Soundstream, Valor, Visteon, and more. (Contact us with your model if we didn’t list it). Automatically detects the vehicle OEM interface and will program itself to it Automatically detects the aftermarket radio and sets the steering wheel control functions The ASWC-1 programs itself to the components it is being installed with New LED with dual colors to make it easier to read the diagnostic feedback Updatable with a micro "B" connector (Metra update cable part number USB-MINI-CAB) The fastest and easiest way to retain steering wheel controls when installing an aftermarket stereo Included in Package: AXSWC Interface 12 Pin Harness with Male 3.5mm Connector Female 3.5mm connector with brown and brown/white wires 12K Ohm Resistor Installation Manual Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-33% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Diamond Audio HX1600.1D 1600 Watt RMS Mono Amplifier $949.99 $1,400.00

Diamond Audio HX1600.1D 1600 Watt RMS Mono Amplifier The Diamond Audio HX1600.1D single channel 1600 watt RMS amplifier is specifically designed for extreme use sound systems that need a small size but major power output. This amp will push any subwoofer you give it, and it'll do it all while staying cool with an anodized extruded aluminum heat sink which provides superior thermal performance. General Features: Anodized Extruded Aluminum Heat Sink Provides Superior Thermal Performance 4-Layer PCB Board with Balanced Differential Inputs Full Range Class D IR Chipset “SNAP” Capacitors used Throughout the Circuit Audiophile Grade High Tolerance Components Spring Steel FET Clips Provide a Cleaner Board Design Illuminated Logo / Fully Concealed Mounting Output Clip Indicators for Precise Set-Up Fine Tuned Fully Variable Crossovers and Phase Control Top Mounted Controls for Convenient Amplifier Adjustment Specification:RMS Power Rating RMS Power (4Ω): 700 W RMS RMS Power (2Ω): 1150 W RMS RMS Power (1Ω): 1600 W RMS Type Topology: Class D Power Supply Power Supply: Full PWM Power Supply Threshold: 10.0VDC-170VDC Idle Current: (0.7A) Distortion THD 4(1KH@4Ω) : 0.01% S/N Ratio(A weighted@1W): -80dBA S/N Ratio(A weighted@FP): -95dBA Input Sensitivity Low Input Level: 200mV-5.0V High Input Level: N/A Input Impedance Low Input Level: 20 KΩ High Input Level: N/A Output Stage Output Impedance: 0.018 Ω Damping Factor(50Hz@4Ω): >250 Bandwidth(-3dB): 10Hz-300Hz Crossover(-12dB/Oct) Variable High-Pass: N/A Variable Low-Pass: 30Hz-300Hz Variable Sub-Sonic: 10Hz-55Hz@12dB Fuse Ratings ATC: 40A X 4 Dimensions Length x Width x Height(Inches): 15.8" x 7.67" x 2" Length x Width x Height(mm): 402 x 195 x 51.5 ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-58% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Diamond Audio MICRO1V2 Monoblock Micro Full Range Class-D Amplifier 500W RMS $399.99 $939.98

Diamond Audio MICRO1V2 Monoblock 500W RMS Class D Amplifier Elite sound quality and superior power in an ultra-compact chassis. The Diamond Audio Micro1v2, one channel power amplifier, sets the standard for high-end Harley-specific amplifiers. The sound quality in a small footprint can be found in Diamond Audio’s MICROV2 amplifiers. Featuring ultra-efficient entire Range Class D IR Chipset DirectFET Power Mosfet Output Stage SMD Technology on four layer Glass PC Board ICAD circuit provides superior overload protection, these compact amplifiers deliver immense power for their size! The added feature of advanced Rollback/Thermal protection allows you to enjoy continuous and uninterrupted play without shutting down. Installation possibilities are endless! When looking for quality and performance in a small package, look to MICROV2 from Diamond Audio. General Features: Ultra-compact, high-density aluminum alloy chassis provides superior thermal stability. Four-layer, glass epoxy circuit board for enhanced performance and reliability Full Range Class D amplifier technology Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Selectable auto-turn-on modes: Signal Sensing (VOX), 12V Remote (REM), and DC offset (DC) Fully variable, 12dB per octave, electronic crossover Variable 18dB per octave sub-sonic filter Adjustable Bass EQ (45Hz: 0dB to +12dB) / remote level control included Illuminated logo Specifications: RMS Power Rating: RMS Power (2Ω): 300W RMS Power (4Ω): 175W Bridged (mono 1Ω): 500W Bridged (mono 2Ω): 300W Bridged (mono 4Ω): 175W Topology: Full Range Class D Power Supply: Power Supply: Full PWM Power Supply Threshold: 10.0VDC - 17.0VDC Idle Current: (0.7A) Distortion: THD 4 (1KHx @ 4Ω): 0.5% S/N Ratio (A weighted @1W): -85dBA S/N Ratio (A weighted @FP): -101.1dBA Input Sensitivity: Low Input Level: 200mV - 10.0V High Input Level: N/A Input Impedance: Low Input Level: 20KΩ High Input Level: 20KΩ Output Stage: Output Impedance: 0.011Ω Damping Factor (50Hz@4Ω): >250 Bandwidth (-3dB): 10Hz - 350Hz Crossover (-12dB/Oct): Variable High-Pass: N/A Variable Low-Pass: 40Hz - 400Hz Variable Sun-Sonic: 10Hz - 55Hz Fuse Ratings: ATC: 25A Dimensions: 7.89” L x 4.0” W x 1.46” H ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-26% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Diamond Audio HXM800.1D Monoblock 800 Watts RMS Class D HXM Series Amplifier $599.99 $799.99

Diamond Audio HXM800.1D Monoblock 800 Watts RMS Class D HXM Series Amplifier The Diamond Audio HXM800.1D is a marine-grade motorsport amplifier that boasts 800 watts RMS on a single channel. Perfect for your system that needs to push a subwoofer to the max while using minimal space. General Features: Ultra-compact, high-density aluminum alloy chassis provides superior thermal stability. Four-layer, glass epoxy circuit board for enhanced performance and reliability Circuit board conformal coated (water resistant) for marine applications Full Range Class D amplifier technology Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Selectable auto-turn-on modes: Signal Sensing (VOX), 12V Remote (REM) and DC offset (DC) Fully variable, 12dB per octave, electronic crossover Variable 18dB per octave sub-sonic filter Phase adjustable from 0 to 180 degrees Adjustable Bass EQ (45Hz: 1dB to +12dB) / remote level control included Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller Top-mounted controls for convenient adjustment Integrated soft clip light for quick system set-up Illuminated logo RMS Power Rating RMS Power (1Ω): 800 W X 1 RMS Power (2Ω): 550 W X 1 RMS Power (4Ω): 350 W X 1 Type Topology: MonoBlock Class D Power Supply Power Supply: Full PWM Power Supply Threshold: 10.0VDC-17.0VDC Idle Current: (0.7A) Distortion THD (1KHz@4Ω) : 0.05% S/N Ratio (A weighted@1W): -77.2dBA S/N Ratio (A weighted@FP): -98.9dBA Input Sensitivity Low Input Level: .2mV-10.0V High Input Level: Yes - Up to 25W RMS Input Impedance Low Input Level: 22 KΩ High Input Level: 22 KΩ Output Stage Output Impedance: 0.047Ω Damping Factor (50Hz@4Ω): >250 Bandwidth (-3dB): 10Hz-350Hz Crossover (-12dB per Octave) Variable High-Pass: N/A Variable Low-Pass: 30Hz - 300Hz Variable Sub-Sonic: 10Hz - 55Hz Recommended Fuse Rating ATC: N/A Dimensions Length x Width x Height (Inches): 8.56 x 5.27 x 1.75 Length x Width x Height (mm): 297.6 x 133.9 x 44.5 ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-49% sale

Diamond Audio HX1200.1D HEX Series Monoblock Class-D Car Audio Amplifier

00
DAYS 00
HRS 00
MIN 00
SEC

Diamond Audio HX1200.1D HEX Series Monoblock Class-D Car Audio Amplifier $769.99 $1,500.00

Diamond Audio HX1200.1D HEX Series Monoblock Class-D Car Audio Amplifier It is introducing the all-new range of Diamond Audio HEX series amplifiers, made for ultimate sound quality and performance. It features a four-layer glass epoxy circuit board, top-mounted controls, and a brushed copper look exterior, making it great for a show car. General Features: Anodized Extruded Aluminum Heat Sink provides superior thermal performance 4-Layer PCB Board with balanced differential inputs Full Range Class D IR Chipset "Snap" capacitors are used throughout the circuit Audiophile Grade High Tolerance Components Spring Steel FET Clips provide a cleaner board design Illuminated logo / fully concealed mounting Output clip indicators for precise setup Fine-tuned fully variable crossovers and phase control Top-mounted controls for convenient amplifier adjustment Monoblock Class-D Amplifier RMS Power Rating: 4 Ohm: 540 watts x 1 Channel RMS Power Rating: 2 Ohm: 870 watts x 1 Channel RMS Power Rating: 1 Ohm: 1200 watts x 1 Channel Frequency Response: 10Hz - 300Hz Variable Low-Pass Filter (12dB/Octave): 30Hz - 300Hz Variable Sub-Sonic Filter (12dB/Octave): 10Hz - 55Hz Top Mounted Controls Anodized Extruded Aluminum Heat Sink 4-Layer PCB Board Balanced Differential Inputs Illuminated Logo Dimensions: 14.2" (362mm) x 7.67" (195mm) x 2" (51.5mm) 1-Year Warranty What is Included? One (1) Diamond Audio HX1200.1D HEX Series Monoblock Class-D Car Audio Amplifier ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-59% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Diamond Audio MICRO2V2 Micro Series 500W 2-Channel Class-D Car Audio Amplifier $349.99 $839.98

Diamond Audio MICRO2V2 Micro Series 500W 2-Channel Class-D Car Audio Amplifier Elite sound quality and superior power in an ultra-compact chassis. The Diamond Audio Micro2v2 2-channel power amplifier sets the standard for high-end Harley-specific amplifiers. Featuring ultra-efficient full range class D topology and ICAD circuit that provides superior overload protection, these compact amplifiers deliver huge power for their size. Its compact design not only has the juice to power your system but will also save you a ton of space in your car or transport whatever you need it. The sound quality in a small footprint chassis can be found with Diamond Audio’s Micro series amplifiers. Featuring the ultra-efficient full-range Class D topology, these compact amplifiers deliver serious power making them the best in class. Installation possibilities are endless due to its size and power amplification output. Even with its small platform, performance and sound quality are never sacrificed with Micro amplifiers from Diamond Audio! General Features: Ultra-compact, high-density aluminum alloy chassis provides superior thermal stability Four-layer, glass epoxy circuit board for enhanced performance and reliability Full Range Class D amplifier technology Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Selectable auto-turn-on modes: Signal Sensing (VOX), 12V Remote (REM), and DC offset (DC) Fully variable, 12dB per octave, electronic crossover Variable 18dB per octave sub-sonic filter Adjustable Bass EQ (45Hz: 0dB to +12dB) Wired Remote Level Control included Illuminated logo Specifications: RMS Power Rating: RMS Power (2Ω): 250W X 2 RMS Power (4Ω): 150W X 2 Bridged (mono 1Ω): N/A Bridged (mono 2Ω): N/A Bridged (mono 4Ω): 500W Topology: Full Range Class D Power Supply: Power Supply: Full PWM Power Supply Threshold: 10.0VDC - 17.0VDC Idle Current: (0.7A) Distortion: THD 4 (1KHx @ 4Ω): 0.5% S/N Ratio (A weighted @1W): -85dBA S/N Ratio (A weighted @FP): -101.1dBA Input Sensitivity: Low Input Level: 200mV - 10.0V High Input Level: up to 10.0V Input Impedance: Low Input Level: 20KΩ High Input Level: 20KΩ Output Stage: Output Impedance: 0.011Ω Damping Factor (50Hz@4Ω): >250 Bandwidth (-3dB): 10Hz - 350Hz Crossover (-12dB/Oct): Variable High-Pass:40Hz - 400Hz Variable Low-Pass: 40Hz - 400Hz Fuse Ratings: ATC: 25A Dimensions: 7.89” L x 4.0” W x 1.46” H ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-50% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Diamond Audio HXM800.2D 2-Channel 800 Watts RMS Class D Full Range HXM Series Amplifier $499.99 $999.98

Diamond Audio HXM800.2D 2-Channel 800 Watts RMS Class D Full-Range HXM Series Amplifier The Diamond Audio HXM800.2D is a marine-grade motorsport amplifier that boasts 800 watts RMS on a single channel. Perfect for your system that needs to push a subwoofer to the max while using minimal space. General Features: Motorsport Series 2-Channel Full-Range Class-D Marine Amplifier Power Output: 300W RMS x 2 @ 4Ω 400W RMS x 2 @ 2Ω 800 W x 1 @ 4Ω bridged Ultra-compact, high-density aluminum alloy chassis provides superior thermal stability Four-layer, glass epoxy circuit board for enhanced performance and reliability Circuit board conformal coated (water resistant) for marine applications Full Range Class D amplifier technology Bridgeable for high power operation Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Selectable auto-turn-on modes: Signal Sensing (VOX),12V Remote (REM), and DC offset (DC) Fully variable, 12 dB per octave, electronic crossover Full range, line-level outputs provided to send a signal to another amplifier Adjustable Bass EQ (MICRO-USB) to connect our optional Bluetooth receiver-controller Top-mounted controls for convenient adjustment Integrated soft clip light for quick system set-up Illuminated logo THD: 0.05% S/N Ratio: < 77.2 dB Low Input Level: 0.2mV - 10.0V Bandwith: 10Hz-35Hz Variable High-Pass: 40-400Hz @ 12dB / Oct Variable Low-Pass: 40-400Hz @ 12dB / Oct Bass Remote Included Dimensions: 9.74"L x 5.27"W x 1.75"H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-61% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Diamond Audio MICRO4V2 Micro Series 600W 4-Channel Class-D Car Audio Amplifier $399.99 $999.99

Diamond Audio MICRO4V2 Micro Series 600W 4-Channel Class-D Car Audio Amplifier Elite sound quality and superior power in an ultra-compact chassis. The Diamond Audio Micro4v2 4-channel power amplifier sets the standard for high-end Harley-specific amplifiers. Featuring ultra-efficient full-range class D topology and ICAD circuit that provides superior overload protection, these compact amplifiers deliver huge power for their size. Its compact design has the juice to power your system and will save you a ton of space in your car or transport whatever you need. The sound quality in a small footprint chassis can be found with Diamond Audio’s Micro series amplifiers. Featuring the ultra-efficient full-range Class D topology, these compact amplifiers deliver serious power making them the best in class. Installation possibilities are endless due to its size and power amplification output. Even with its small platform, performance and sound quality are never sacrificed with Micro amplifiers from Diamond Audio! General Features: Ultra-compact, high-density aluminum alloy chassis provides superior thermal stability. Four-layer, glass epoxy circuit board for enhanced performance and reliability Full Range Class D amplifier technology Bridgeable for high-power operation (CH1+CH2/CH3+CH4) Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Input selector switch (2 CH / 4 CH) Selectable auto-turn-on mode: Signal Sensing (VOX), 12V Remote (REM), and DC offset (DC) Fully variable, 12dB per octave, electronic crossovers Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller Illuminated logo Specifications: RMS Power Rating: RMS Power (2Ω): 150W x 4 RMS Power (4Ω): 80W x 4 Bridged (mono 1Ω): N/A Bridged (mono 2Ω): N/A Bridged (mono 4Ω): 300W x 2 Topology: Full Range Class D Power Supply: Power Supply: Full PWM Power Supply Threshold: 10.0VDC - 17.0VDC Idle Current: (0.7A) Distortion: THD 4 (1KHx @ 4Ω): 0.5% S/N Ratio (A weighted @1W): -85dBA S/N Ratio (A weighted @FP): -101.1dBA Input Sensitivity: Low Input Level: 200mV - 10.0V High Input Level: N/A Input Impedance: Low Input Level: 20KΩ High Input Level: 20KΩ Output Stage: Output Impedance: 0.018Ω Damping Factor (50Hz@4Ω): >70 Bandwidth (-3dB): 10Hz - 35Hz Crossover (-12dB/Oct): Variable High-Pass: 40Hz - 400Hz Variable Low-Pass: 40Hz - 400Hz Variable Sun-Sonic: N/A Fuse Ratings: 40A Dimensions: 9.07” L x 4.0” W x 1.46” H ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-43% sale

Diamond Audio MICRO4V2 4-Channel 600W RMS Class D Amplifier

00
DAYS 00
HRS 00
MIN 00
SEC

Diamond Audio MICRO4V2 4-Channel 600W RMS Class D Amplifier $399.99 $699.99

Diamond Audio MICRO4V2 Micro Series 600W 4-Channel Class-D Car Audio Amplifier Elite sound quality and superior power in an ultra-compact chassis. The Diamond Audio Micro4v2 4-channel power amplifier sets the standard for high-end Harley-specific amplifiers. Featuring ultra-efficient full-range class D topology and ICAD circuit that provides superior overload protection, these compact amplifiers deliver huge power for their size. Its compact design has the juice to power your system and will save you a ton of space in your car or transport whatever you need. The sound quality in a small footprint chassis can be found with Diamond Audio’s Micro series amplifiers. Featuring the ultra-efficient full-range Class D topology, these compact amplifiers deliver serious power making them the best in class. Installation possibilities are endless due to its size and power amplification output. Even with its small platform, performance and sound quality are never sacrificed with Micro amplifiers from Diamond Audio! General Features: Ultra-compact, high-density aluminum alloy chassis provides superior thermal stability. Four-layer, glass epoxy circuit board for enhanced performance and reliability Full Range Class D amplifier technology Bridgeable for high-power operation (CH1+CH2/CH3+CH4) Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Input selector switch (2 CH / 4 CH) Selectable auto-turn-on mode: Signal Sensing (VOX), 12V Remote (REM), and DC offset (DC) Fully variable, 12dB per octave, electronic crossovers Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller Illuminated logo Specifications: RMS Power Rating: RMS Power (2Ω): 150W x 4 RMS Power (4Ω): 80W x 4 Bridged (mono 1Ω): N/A Bridged (mono 2Ω): N/A Bridged (mono 4Ω): 300W x 2 Topology: Full Range Class D Power Supply: Power Supply: Full PWM Power Supply Threshold: 10.0VDC - 17.0VDC Idle Current: (0.7A) Distortion: THD 4 (1KHx @ 4Ω): 0.5% S/N Ratio (A weighted @1W): -85dBA S/N Ratio (A weighted @FP): -101.1dBA Input Sensitivity: Low Input Level: 200mV - 10.0V High Input Level: N/A Input Impedance: Low Input Level: 20KΩ High Input Level: 20KΩ Output Stage: Output Impedance: 0.018Ω Damping Factor (50Hz@4Ω): >70 Bandwidth (-3dB): 10Hz - 35Hz Crossover (-12dB/Oct): Variable High-Pass: 40Hz - 400Hz Variable Low-Pass: 40Hz - 400Hz Variable Sun-Sonic: N/A Fuse Ratings: 40A Dimensions: 9.07” L x 4.0” W x 1.46” H ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Find anything you need

Completed Products (7431)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER