Completed Products (7419)

Rockford Fosgate PRIME R1T-S 160W Peak (80W RMS) 1" Mylar Balanced Dome Car Tweeters The R1T-S is a 1/2” mylar balanced dome tweeter kit rated at 40 watts RMS offering accurate reproduction of high frequencies. Kit includes integrated high-pass crossovers and flush, surface, and angle configurations. The PRIME series Component System kits are a new generation of factory replacement speakers delivering authentic Rockford Fosgate sound. The R1T-S is a dedicated tweeter system featuring a lightweight Mylar® dome for high sensitivity and smooth extended frequency response. This low distortion material allows accurate reproduction of high frequencies for an open sound stage. Multiple tweeter mounting configurations allow flush, surface, and angle configurations. General Features: Prime Series Tweeter Kit Power Handling: Peak: 160 watts per set / 80 watts each side Power Handling: RMS: 80 watts per set / 40 watts each side Recommended power range: 10 - 40 watts RMS per channel CEA-2031 Compliant speaker system Klippel verified speaker certified 1" Tweeter features a lightweight Mylar dome delivering crisp sound reproduction Low distortion material allows accurate reproduction of high frequencies for an open sound stage Tweeter High-Pass (HP): 4.5kHz @ 6dB/octave Frequency response: 2,500 - 22,000 Hz Free air resonance: 2,600 Hz Sensitivity: 72.5 dB Surface/angle and flush mount Contains mounting hardware Grilles/trim rings included Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Rockford Fosgate R1T-S owner's manual Two 1" tweeters (with attached 6' speaker wire terminated by quick-slide connectors) 2 Flush-mounting brackets (installed) 2 Flush mount retaining rings 2 Surface mounting brackets Four 5/8" Flat head screws Installation and Operation Instructions (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate Prime R1T-S 1-Inch Tweeter Kit & Fosgate R169X3 Prime 6” x 9” 3-Way Full-Range Coaxial Speaker (Pair) Rockford Fosgate R169X3 6x9" 260-Watt 3 Way Car Speakers The Rockford Fosgate R169X3 is a 6”x9” 3-way full-range speaker rated at 65 watts (130W per 4 pack) RMS for a new generation of factory replacement speakers. Kit includes integrated high pass crossovers and mounting hardware. The 6"x9" Prime full-range speakers offer Rockford Fosgate sound quality at a fantastic value. Perfect for replacing factory speakers, they feature polypropylene cones and a silk dome pole mounted Piezo tweeter and midrange. Includes grilles so they look as good as they sound. General Features: R169X3 New Rockford Fosgate R169X3 6x9" 260-Watt 3 Way Car Speakers (2 Pairs) 130 Watt Max (260 Watt per 4 Speakers) 65 Watt RMS (130 Watt per 4 Speakers) Vacuum Polypropylene cone Rubber surround Stamped steel basket Silk dome flush mounted tweeter Integrated tweeter crossover Impedance: 4 Ohm Sensitivity: 90dB Frequency Response: 47Hz 20kHz Crossover: Tweeter High Pass (HP): 6dB Klippel Verified Klippel is a speaker certification program allowing us to deliver the best possible speakers. ICC Crossover the Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look CEA 2031 Compliant Grills Included Product Condition: Brand New Part Number: R169X3 1 Year Manufacturer Warranty What's in the box:Rockford Fosgate R169X3 owner's manual Two 3-Way speakers 2 Grilles Two 15' Lengths of speaker wire (each has female quick-slides on one end and tinned bare wire on the other) Eight 1-1/4" Screws 8 Speed clips Installation/Operation manual (English/ French/ Spanish/ German/ Italian) Rockford Fosgate PRIME R1T-S 160W Peak (80W RMS) 1" Mylar Balanced Dome Car Tweeters The R1T-S is a 1/2” mylar balanced dome tweeter kit rated at 40 watts RMS offering accurate reproduction of high frequencies. Kit includes integrated high-pass crossovers and flush, surface, and angle configurations. The PRIME series Component System kits are a new generation of factory replacement speakers delivering authentic Rockford Fosgate sound. The R1T-S is a dedicated tweeter system featuring a lightweight Mylar® dome for high sensitivity and smooth extended frequency response. This low distortion material allows accurate reproduction of high frequencies for an open sound stage. Multiple tweeter mounting configurations allow flush, surface, and angle configurations. General Features: Prime Series Tweeter Kit Power Handling: Peak: 160 watts per set / 80 watts each side Power Handling: RMS: 80 watts per set / 40 watts each side Recommended power range: 10 - 40 watts RMS per channel CEA-2031 Compliant speaker system Klippel verified speaker certified 1" Tweeter features a lightweight Mylar dome delivering crisp sound reproduction Low distortion material allows accurate reproduction of high frequencies for an open sound stage Tweeter High-Pass (HP): 4.5kHz @ 6dB/octave Frequency response: 2,500 - 22,000 Hz Free air resonance: 2,600 Hz Sensitivity: 72.5 dB Surface/angle and flush mount Contains mounting hardware Grilles/trim rings included Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Rockford Fosgate R1T-S owner's manual Two 1" tweeters (with attached 6' speaker wire terminated by quick-slide connectors) 2 Flush-mounting brackets (installed) 2 Flush mount retaining rings 2 Surface mounting brackets Four 5/8" Flat head screws Installation and Operation Instructions (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate Prime R1T-S 1-Inch Tweeter Kit & Metra 72-4568 Speaker Harness for Selected General Motor VehiclesMetra 72-4568 Speaker Harness for Selected General Motor VehiclesSpeaker Harness for Select GM Vehicles Rockford Fosgate PRIME R1T-S 160W Peak (80W RMS) 1" Mylar Balanced Dome Car Tweeters The R1T-S is a 1/2” mylar balanced dome tweeter kit rated at 40 watts RMS offering accurate reproduction of high frequencies. Kit includes integrated high-pass crossovers and flush, surface, and angle configurations. The PRIME series Component System kits are a new generation of factory replacement speakers delivering authentic Rockford Fosgate sound. The R1T-S is a dedicated tweeter system featuring a lightweight Mylar® dome for high sensitivity and smooth extended frequency response. This low distortion material allows accurate reproduction of high frequencies for an open sound stage. Multiple tweeter mounting configurations allow flush, surface, and angle configurations. General Features: Prime Series Tweeter Kit Power Handling: Peak: 160 watts per set / 80 watts each side Power Handling: RMS: 80 watts per set / 40 watts each side Recommended power range: 10 - 40 watts RMS per channel CEA-2031 Compliant speaker system Klippel verified speaker certified 1" Tweeter features a lightweight Mylar dome delivering crisp sound reproduction Low distortion material allows accurate reproduction of high frequencies for an open sound stage Tweeter High-Pass (HP): 4.5kHz @ 6dB/octave Frequency response: 2,500 - 22,000 Hz Free air resonance: 2,600 Hz Sensitivity: 72.5 dB Surface/angle and flush mount Contains mounting hardware Grilles/trim rings included Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Rockford Fosgate R1T-S owner's manual Two 1" tweeters (with attached 6' speaker wire terminated by quick-slide connectors) 2 Flush-mounting brackets (installed) 2 Flush mount retaining rings 2 Surface mounting brackets Four 5/8" Flat head screws Installation and Operation Instructions (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate Punch P1T-S 240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit The Punch P1T-S is a 1” PEI dome tweeter kit designed for natural sound reproduction rated at 60 Watts RMS. The kit includes high-pass crossovers, mounting hardware, and three bezels for flush, surface, and angle configurations. Car audio fanatics will love the Punch series tweeter kit. It features a 1" (25mm) PEI dome, cool-looking outboard crossover, and 3 mounting bezels to accommodate various installations. General Features: 1" Punch Series Tweeter Kit Power Handling: Peak: 240 watts per pair / 120 watts each RMS: 120 watts per pair / 60 watts each Recommended power range: 10 - 60 watts RMS per channel Butyl rubber surround PEI dome tweeter Recessed tweeter mount uses standard 1-3/4" hole saw DDC (Discreet Dual Clamp) Tweeter Mounting provides concentric clamping pressure around the perimeter of the mounting hole. This results in maximum ease of installation. Grilles and mounting hardware included High Pass: 3,500 Hz 12dB/octave Butterworth Sensitivity: 90dB Frequency Response: 3,500-22,000 Hz Mounting Depth: 1/2" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Rockford Fosgate Punch P1T-S owner's manual Two 1" tweeters (with attached 6" speaker wire terminated with female quick-slide connectors) 2 Crossovers 2 Front flush mount brackets 2 Rear flush mount brackets 2 Surface mounting housings 2 Trim rings Two M4x25mm Machine screws Two M4x10mm Machine screws Two M4x16mm Stud bolts Two 40" Lengths of speaker wire (each with male quick slides on one end and female quick slides on the other) Two 40" Lengths of speaker wire (each with female quick slides on one end and bare wire on the other) Four 7" Zip ties Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate P1T-S Punch 1" Tweeter Kit (Pair), Black & R165X3 Prime 6.5" Full-Range 3-Way Coaxial Speaker (Pair), Black Rockford Fosgate Punch P1T-S 240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit The Punch P1T-S is a 1” PEI dome tweeter kit designed for natural sound reproduction rated at 60 Watts RMS. The kit includes high-pass crossovers, mounting hardware, and three bezels for flush, surface, and angle configurations. Car audio fanatics will love the Punch series tweeter kit. It features a 1" (25mm) PEI dome, cool-looking outboard crossover, and 3 mounting bezels to accommodate various installations. General Features: 1" Punch Series Tweeter Kit Power Handling: Peak: 240 watts per pair / 120 watts each RMS: 120 watts per pair / 60 watts each Recommended power range: 10 - 60 watts RMS per channel Butyl rubber surround PEI dome tweeter Recessed tweeter mount uses standard 1-3/4" hole saw DDC (Discreet Dual Clamp) Tweeter Mounting provides concentric clamping pressure around the perimeter of the mounting hole. This results in maximum ease of installation. Grilles and mounting hardware included High Pass: 3,500 Hz 12dB/octave Butterworth Sensitivity: 90dB Frequency Response: 3,500-22,000 Hz Mounting Depth: 1/2" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Rockford Fosgate Punch P1T-S owner's manual Two 1" tweeters (with attached 6" speaker wire terminated with female quick-slide connectors) 2 Crossovers 2 Front flush mount brackets 2 Rear flush mount brackets 2 Surface mounting housings 2 Trim rings Two M4x25mm Machine screws Two M4x10mm Machine screws Two M4x16mm Stud bolts Two 40" Lengths of speaker wire (each with male quick slides on one end and female quick slides on the other) Two 40" Lengths of speaker wire (each with female quick slides on one end and bare wire on the other) Four 7" Zip ties Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian) Rockford Fosgate Prime R165X3 Car Speaker 180W Peak, 90W RMS 6.5" 3-Way PRIME Series Coaxial Speakers w/ Silk Tweeters The R165X3 is a 6.50” 3-way full-range speaker rated at 90 watts RMS for a new generation of factory replacement speakers. Kit includes two speakers with grilles, integrated high-pass crossovers, and mounting hardware. General Features: Vacuum Polypropylene cone Rubber surround Stamped steel basket Silk dome pole mounted Piezo tweeter and midrange Integrated tweeter crossover Grilles and mounting hardware included CEA-2031 Compliant Configuration: 3-Way Full-Range Midrange Diameter (in): 6.5" Midrange Depth (in): 2.15" (54.5mm) Tweeter Diameter (in): .50" (12mm) Frequency Response: 52Hz - 20kHz Nominal Impedance: 4-Ohm Power Handling (RMS): 45 Watts RMS 90 Watts MAX Crossover: Tweeter High-Pass (HP): 6dB Sensitivity (dB @ 1 watt/1 meter): 91 dB Grilles Included: Yes Mounting Hardware: Yes Priced Per Pair Authorized Dealer 1 Year Warranty What's in the box: Two 3-Way speakers 2 Grilles Two 15' Lengths of speaker wire (each has female quick-slides on one end and tinned bare wire on the other) Eight 1-1/4" Self-tapping screws 8 Speed clips Installation/Operation manual (English/ French/ Spanish/ German/ Italian) Rockford Fosgate R165X3 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate P1T-S Punch 1" Tweeter Kit (Pair), Black & P1692 Punch 6"x9" 2-Way Full-Range Speaker (Pair) Rockford Fosgate P1T-S Punch 1" Tweeter Kit (Pair), Black & P1692 Punch 6"x9" 2-Way Full-Range Speaker (Pair) Rockford Fosgate Punch P1692 Car Speaker 300W Peak, 150W RMS 6x9" 2-Way Punch Series Full Range Coaxial SpeakersThe P1692 is a 6”x9” 2-way full-range speaker rated at 65 watts RMS designed for fanatics needing a quality factory replacement driver. Includes two speakers with grilles, integrated high-pass crossovers, and mounting hardware.Fanatics that need a great sounding speaker to replace factory-installed garbage will certainly benefit from this Punch series full-range speaker. The P1692 offers a Flex Fit™ basket to ensure compatibility with oddly shaped factory speaker locations and an ICC (Integrated Concealed Crossover), eliminating the need to mount any black boxes. General Features: 6" x 9" Punch Series 2-way Full Range Car Speakers FlexFit basket design Power Handling: Peak: 300 watts per pair / 150 watts each RMS: 150 watts per pair / 75 watts each Recommended Power Range: 15 - 75 watts RMS per channel VAST (Vertical Attach Surround Technique) butyl Rubber surround Mica-injected, polypropylene cone woofer OEM adapter plate included PEI dome tweeter Butyl rubber surround 3/4" Treated PEI dome tweeter StampCast frame structure Two 1/2" PEI Dome tweeters Built-in 3-way crossover 4 ohms impedance Cutout Dimensions: 5.77" x 8.51" Kapton voice coil former Cold-rolled steel baskets reduce unwanted resonance Injection-molded mineral-filled polypropylene cone Includes grill and mounting hardware Frequency Response: 60 - 22,000 Hz Top-mount Depth: 3.07" Sensitivity: 91dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the box: Two 2-way 6X9" speakers 2 Grilles 3mm Allen head bit 8 Speed clips Installation & Operation manual Rockford Fosgate P1692 owner's manual Rockford Fosgate Punch P1T-S 240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit The Punch P1T-S is a 1” PEI dome tweeter kit designed for natural sound reproduction rated at 60 Watts RMS. The kit includes high-pass crossovers, mounting hardware, and three bezels for flush, surface, and angle configurations. Car audio fanatics will love the Punch series tweeter kit. It features a 1" (25mm) PEI dome, cool-looking outboard crossover, and 3 mounting bezels to accommodate various installations. General Features: 1" Punch Series Tweeter Kit Power Handling: Peak: 240 watts per pair / 120 watts each RMS: 120 watts per pair / 60 watts each Recommended power range: 10 - 60 watts RMS per channel Butyl rubber surround PEI dome tweeter Recessed tweeter mount uses standard 1-3/4" hole saw DDC (Discreet Dual Clamp) Tweeter Mounting provides concentric clamping pressure around the perimeter of the mounting hole. This results in maximum ease of installation. Grilles and mounting hardware included High Pass: 3,500 Hz 12dB/octave Butterworth Sensitivity: 90dB Frequency Response: 3,500-22,000 Hz Mounting Depth: 1/2" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Rockford Fosgate Punch P1T-S owner's manual Two 1" tweeters (with attached 6" speaker wire terminated with female quick-slide connectors) 2 Crossovers 2 Front flush mount brackets 2 Rear flush mount brackets 2 Surface mounting housings 2 Trim rings Two M4x25mm Machine screws Two M4x10mm Machine screws Two M4x16mm Stud bolts Two 40" Lengths of speaker wire (each with male quick slides on one end and female quick slides on the other) Two 40" Lengths of speaker wire (each with female quick slides on one end and bare wire on the other) Four 7" Zip ties Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

2 Pair Rockford Fosgate Punch P1T-S 240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit The Punch P1T-S is a 1” PEI dome tweeter kit for natural sound reproduction rated at 60 Watts RMS. The kit includes high-pass crossovers, mounting hardware, and three bezels for flush, surface, and angle configurations. Car audio fanatics will love the Punch series tweeter kit. It features a 1" (25mm) PEI dome, a cool-looking outboard crossover, and three mounting bezels to accommodate various installations. General Features: 1" Punch Series Tweeter Kit Power Handling: Peak: 240 watts per pair / 120 watts each RMS: 120 watts per pair / 60 watts each Recommended power range: 10 - 60 watts RMS per channel Butyl rubber surround PEI dome tweeter The recessed tweeter mount uses a standard 1-3/4" hole saw DDC (Discreet Dual Clamp) Tweeter Mounting provides concentric clamping pressure around the perimeter of the mounting hole. This results in maximum ease of installation. Grilles and mounting hardware included High Pass: 3,500 Hz 12dB/octave Butterworth Sensitivity: 90dB Frequency Response: 3,500-22,000 Hz Mounting Depth: 1/2" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Rockford Fosgate Punch P1T-S owner's manual Two 1" tweeters (with attached 6" speaker wire terminated with female quick-slide connectors) 2 Crossovers 2 Front flush mount brackets 2 Rear flush mount brackets 2 Surface mounting housings 2 Trim rings Two M4x25mm Machine screws Two M4x10mm Machine screws Two M4x16mm Stud bolts Two 40" Lengths of speaker wire (each with male quick slides on one end and female quick slides on the other) Two 40" Lengths of speaker wire (each with female quick slides on one end and bare wire on the other) Four 7" Zip ties Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

2 Pair Rockford Fosgate Punch P1T-S 240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit The Punch P1T-S is a 1” PEI dome tweeter kit designed for natural sound reproduction rated at 60 Watts RMS. The kit includes high-pass crossovers, mounting hardware, and three bezels for flush, surface, and angle configurations. Car audio fanatics will love the Punch series tweeter kit. It features a 1" (25mm) PEI dome, cool-looking outboard crossover, and 3 mounting bezels to accommodate various installations. General Features: 1" Punch Series Tweeter Kit Power Handling: Peak: 240 watts per pair / 120 watts each RMS: 120 watts per pair / 60 watts each Recommended power range: 10 - 60 watts RMS per channel Butyl rubber surround PEI dome tweeter Recessed tweeter mount uses standard 1-3/4" hole saw DDC (Discreet Dual Clamp) Tweeter Mounting provides concentric clamping pressure around the perimeter of the mounting hole. This results in maximum ease of installation. Grilles and mounting hardware included High Pass: 3,500 Hz 12dB/octave Butterworth Sensitivity: 90dB Frequency Response: 3,500-22,000 Hz Mounting Depth: 1/2" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Rockford Fosgate Punch P1T-S owner's manual Two 1" tweeters (with attached 6" speaker wire terminated with female quick-slide connectors) 2 Crossovers 2 Front flush mount brackets 2 Rear flush mount brackets 2 Surface mounting housings 2 Trim rings Two M4x25mm Machine screws Two M4x10mm Machine screws Two M4x16mm Stud bolts Two 40" Lengths of speaker wire (each with male quick slides on one end and female quick slides on the other) Two 40" Lengths of speaker wire (each with female quick slides on one end and bare wire on the other) Four 7" Zip ties Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Pair Rockford Fosgate Punch P1T-S 240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit The Punch P1T-S is a 1” PEI dome tweeter kit designed for natural sound reproduction rated at 60 Watts RMS. The kit includes high-pass crossovers, mounting hardware, and three bezels for flush, surface, and angle configurations. Car audio fanatics will love the Punch series tweeter kit. It features a 1" (25mm) PEI dome, cool-looking outboard crossover, and 3 mounting bezels to accommodate various installations. General Features: 1" Punch Series Tweeter Kit Power Handling: Peak: 240 watts per pair / 120 watts each RMS: 120 watts per pair / 60 watts each Recommended power range: 10 - 60 watts RMS per channel Butyl rubber surround PEI dome tweeter Recessed tweeter mount uses standard 1-3/4" hole saw DDC (Discreet Dual Clamp) Tweeter Mounting provides concentric clamping pressure around the perimeter of the mounting hole. This results in maximum ease of installation. Grilles and mounting hardware included High Pass: 3,500 Hz 12dB/octave Butterworth Sensitivity: 90dB Frequency Response: 3,500-22,000 Hz Mounting Depth: 1/2" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Rockford Fosgate Punch P1T-S owner's manual Two 1" tweeters (with attached 6" speaker wire terminated with female quick-slide connectors) 2 Crossovers 2 Front flush mount brackets 2 Rear flush mount brackets 2 Surface mounting housings 2 Trim rings Two M4x25mm Machine screws Two M4x10mm Machine screws Two M4x16mm Stud bolts Two 40" Lengths of speaker wire (each with male quick slides on one end and female quick slides on the other) Two 40" Lengths of speaker wire (each with female quick slides on one end and bare wire on the other) Four 7" Zip ties ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

6 Pair Rockford Fosgate Punch P1T-S 240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit The Punch P1T-S is a 1” PEI dome tweeter kit designed for natural sound reproduction rated at 60 Watts RMS. The kit includes high-pass crossovers, mounting hardware, and three bezels for flush, surface, and angle configurations. Car audio fanatics will love the Punch series tweeter kit. It features a 1" (25mm) PEI dome, cool-looking outboard crossover, and 3 mounting bezels to accommodate various installations. General Features: 1" Punch Series Tweeter Kit Power Handling: Peak: 240 watts per pair / 120 watts each RMS: 120 watts per pair / 60 watts each Recommended power range: 10 - 60 watts RMS per channel Butyl rubber surround PEI dome tweeter Recessed tweeter mount uses standard 1-3/4" hole saw DDC (Discreet Dual Clamp) Tweeter Mounting provides concentric clamping pressure around the perimeter of the mounting hole. This results in maximum ease of installation. Grilles and mounting hardware included High Pass: 3,500 Hz 12dB/octave Butterworth Sensitivity: 90dB Frequency Response: 3,500-22,000 Hz Mounting Depth: 1/2" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Rockford Fosgate Punch P1T-S owner's manual Two 1" tweeters (with attached 6" speaker wire terminated with female quick-slide connectors) 2 Crossovers 2 Front flush mount brackets 2 Rear flush mount brackets 2 Surface mounting housings 2 Trim rings Two M4x25mm Machine screws Two M4x10mm Machine screws Two M4x16mm Stud bolts Two 40" Lengths of speaker wire (each with male quick slides on one end and female quick slides on the other) Two 40" Lengths of speaker wire (each with female quick slides on one end and bare wire on the other) Four 7" Zip ties Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

6 Pair Rockford Fosgate Punch P1T-S 240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit The Punch P1T-S is a 1” PEI dome tweeter kit designed for natural sound reproduction rated at 60 Watts RMS. The kit includes high-pass crossovers, mounting hardware, and three bezels for flush, surface, and angle configurations. Car audio fanatics will love the Punch series tweeter kit. It features a 1" (25mm) PEI dome, cool-looking outboard crossover, and 3 mounting bezels to accommodate various installations. General Features: 1" Punch Series Tweeter Kit Power Handling: Peak: 240 watts per pair / 120 watts each RMS: 120 watts per pair / 60 watts each Recommended power range: 10 - 60 watts RMS per channel Butyl rubber surround PEI dome tweeter Recessed tweeter mount uses standard 1-3/4" hole saw DDC (Discreet Dual Clamp) Tweeter Mounting provides concentric clamping pressure around the perimeter of the mounting hole. This results in maximum ease of installation. Grilles and mounting hardware included High Pass: 3,500 Hz 12dB/octave Butterworth Sensitivity: 90dB Frequency Response: 3,500-22,000 Hz Mounting Depth: 1/2" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Rockford Fosgate Punch P1T-S owner's manual Two 1" tweeters (with attached 6" speaker wire terminated with female quick-slide connectors) 2 Crossovers 2 Front flush mount brackets 2 Rear flush mount brackets 2 Surface mounting housings 2 Trim rings Two M4x25mm Machine screws Two M4x10mm Machine screws Two M4x16mm Stud bolts Two 40" Lengths of speaker wire (each with male quick slides on one end and female quick slides on the other) Two 40" Lengths of speaker wire (each with female quick slides on one end and bare wire on the other) Four 7" Zip ties ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

   MR DJ ST200 & SBB260 Pro Lighting 12-Foot Crank Light Stand & Black Square Truss T-Bar Adapter MR DJ ST200 Pro Audio PA Speaker or Lighting Adjustable 12-Foot Max Height Crank Tripod Stand MR DJ Lighting Crank Up Stands are triangle crank truss tripod stands. This heavy-duty truss lighting stand includes a high-quality crank-up system. The stand can safely reach up to 12 feet. T-adapters are included so you may easily mount your truss to the stands. You can mount up to 200 lbs evenly. General Features: Telescopes from 6 to 12 Foot Max Height Tube Diameter: 35mm (1.375'') Loading Capacity: 200 Lbs. Constructed with Strong but Lightweight Iron Safety Pin for Maximum Strength and Security The hand crank allows for speakers or lights to be easily raised/lowered Sold as: Single Stand Max Height-11ft. 6in. (3.5m) Heavy Duty Industrial Grade Metal Perfect For Mobile Use Extremely Durable Shipping Weight: 26.75 lbs Shipping Dimensions: 59 x 10 x 8 in MR DJ SBB260 Chrome Square Truss T-Bar Adapter Triangle or Square Truss Adapter Bracket Tripod Crank Light Stand Support Bar Lighting Compatible with Global Trussing ST-90 ST-132 ST-157 General Features: Square or Triangle Truss Lighting Stand Adapter Compatible with Global Truss ST-90, ST-132 & ST-157 Works with any Crank or Fixed Tripod Stand with a 35mm Pole Overall Length: 17" Latches Slide from 4.5" to 13" (On Latch Center) and lock into place Safety Cotter Pin: Ensure the Bolt will not slide out Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.