Products – Page 936 – absoluteusa

Rockford Fosgate P2D4-12 Subwoofer $199.99 $359.99

Rockford Fosgate P2D4-12 12" 1600W Car Audio Subwoofer Rockford Fosgate has always been known as "The PUNCH," and the P2 12" subwoofer continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available. General Features: 12" Dual 4 ohm Punch Stage 2 Subwoofer Power Handling: RMS: 400 watts Power Handling: Peak: 800 watts Recommended power range: 300 - 500 watts RMS Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST; Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Mounting Depth: 6.40" Cutout Diameter: 11.22" Magnet Weight: 72.80 oz Frequency Response: 27.2 - 250 Hz Xmax: 13.3mm Sensitivity: 86 dB @ 1 watt / 1 meter Weight: 16 Ibs 1-year Manufacturer's Warranty Authorized Internet Dealer What is in the P2D4-12 package: P2D4-12 owner's manual Two 12" Dual 4-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -26% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate P2D4-8 8" Punch 1000W Subwoofer Pair $299.98 $399.99

2 Rockford Fosgate Punch P2D4-8 500W Max (250W RMS) 8" Punch P2 Series Dual 4-Ohm Car Subwoofer Rockford Fosgate has always delivered the "punch," and the dual-voice-coil P2 8-inch subwoofer is no exception. Kevlar fiber-reinforced paper cones kick out the bass impact you can feel, along with Rockford's "VAST" technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes a diamond cut cast aluminum trim ring, and an optional grille insert is also available. General Features: 8" Dual 4 ohm Punch Stage 2 Subwoofer Power Handling: Peak: 500 watts Power Handling: RMS: 250 watts Recommended power range: 125 - 300 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Rockford Fosgate P2 Series Mounting Depth: 4.76" Cutout Diameter: 7.13" Magnet Weight: 49 oz Frequency Response: 43 - 250 Hz Xmax: 7.7mm Sensitivity: 83 dB @ 1 watt / 1 meter Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P2D4-8 package: P2D4-8 owner's manual One 8" Dual 4-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual

Sold out -47% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate P2D4-8 8" Punch 500W 4-Ohm Subwoofers $149.99 $279.98

Rockford Fosgate Punch P2D4-8 500W Max (250W RMS) 8" Punch P2 Series Dual 4-Ohm Car Subwoofer Rockford Fosgate has always delivered the "punch," and the dual-voice-coil P2 8-inch subwoofer is no exception. Kevlar fiber-reinforced paper cones kick out the bass impact you can feel, along with Rockford's "VAST" technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes a diamond cut cast aluminum trim ring, and an optional grille insert is also available. General Features: 8" Dual 4 ohm Punch Stage 2 Subwoofer Power Handling: Peak: 500 watts Power Handling: RMS: 250 watts Recommended power range: 125 - 300 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Rockford Fosgate P2 Series Mounting Depth: 4.76" Cutout Diameter: 7.13" Magnet Weight: 49 oz Frequency Response: 43 - 250 Hz Xmax: 7.7mm Sensitivity: 83 dB @ 1 watt / 1 meter Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P2D4-8 package: P2D4-8 owner's manual One 8" Dual 4-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -34% sale

Rockford Fosgate P3-2X12 Punch Dual P3 12

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate P3-2X12 Punch Dual P3 12" Loaded Enclosure Ported Subwoofer $659.99 $990.00

Rockford Fosgate P3-2X12 Punch Dual P3 12" Loaded Enclosure Ported Subwoofer The P3-2X12 is a dual P3 12” vented enclosure with 1200 Watts RMS power handling wired to a 1-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high-density carpet, and features quick-release compression terminals. General Features: Subwoofer Features: 12" Punch P3 Series Subwoofers Power Handling: Peak: 2400 watts RMS: 1200 watts Recommended power range: 600 - 1400 watts RMS @ 1 ohm CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.5" voice coil w/ spun-laced Nome insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Magnet Weight: 96 oz Frequency Response: 27.7 - 250 Hz Xmax: 15.9mm Sensitivity: 85 dB @ 1 watt / 1 meter Authorized Internet Dealer 1-year Manufacturer's Warranty Enclosure Features: Dual Punch P3 12" Loaded Subwoofer Enclosure Constructed with durable 5/8" MDF High current binding posts Proprietary high-flow, low-noise port Durable black carpet covering Computer-optimized design Final Impedance: 1 ohm Dimensions: 15-3/4”D x 33-7/8”W x 15-1/8”H Shipping Weight: 89.65 Lbs. (40.66 kg) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Sold out -3% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate P300-12 300W 12" Single Powered Bass Sub Enclosure Amp $389.99 $399.99

Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area. General Features: 12" Punch Series Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Proprietary woofer optimized by Rockford Fosgate for this enclosure CEA-2031 Compliant Klippel Verified Proprietary spider venting/cooling technique StampCast basket with integrated spider venting High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Frequency response: 35-150 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty Enclosure General Features: Rockford Fosgate Sealed Enclosure "Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure Universal vehicle fitment 5/8" MDF Box material Covered with industrial heat-activated vinyl Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H Weight: 29.6 Lbs. (approx) Amplifier General Features: 300 Watt Class-D monoblock CEA-2006 Compliant Remote bass level control included Intelligent auto turn on/off function Gain and bass boost control Built-in adjustable bass boost EQ Built-in 0°/180° phase switch Variable 50Hz to 200Hz @ 12dB/Octave Butterworth Removable Connector Power/Ground/Remote Thermal and over-voltage protection High-efficiency, low current design Low-Level & High-Level Inputs Low-Level: 1 RCA Pair High-Level: Left/Right Summed Inputs What is in the box: Rockford Fosgate Punch P300-12 owner's manual Subwoofer enclosure loaded with one 12" woofer and built-in amplifier Four 10 amp ATO fuses (two installed in enclosure/ two spare) Removable power plug 10" Signal input harness 3mm Allen wrench Remote Punch Level Control Metal mounting bracket (for Punch Level Control) 17.5' Punch Level Control cable (3.5mm plug on both ends) Two 3/8" Punch Level Control mounting screws Hook and Loop mounting straps Installation and Operation manual (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -6% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate P300-12 300W 12" Single Powered Bass Sub Sealed Enclosure Amp $379.99 $399.99

Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area. General Features: 12" Punch Series Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Proprietary woofer optimized by Rockford Fosgate for this enclosure CEA-2031 Compliant Klippel Verified Proprietary spider venting/cooling technique StampCast basket with integrated spider venting High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Frequency response: 35-150 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty Enclosure General Features: Rockford Fosgate Sealed Enclosure "Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure Universal vehicle fitment 5/8" MDF Box material Covered with industrial heat-activated vinyl Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H Weight: 29.6 Lbs. (approx) Amplifier General Features: 300 Watt Class-D monoblock CEA-2006 Compliant Remote bass level control included Intelligent auto turn on/off function Gain and bass boost control Built-in adjustable bass boost EQ Built-in 0°/180° phase switch Variable 50Hz to 200Hz @ 12dB/Octave Butterworth Removable Connector Power/Ground/Remote Thermal and over-voltage protection High-efficiency, low current design Low-Level & High-Level Inputs Low-Level: 1 RCA Pair High-Level: Left/Right Summed Inputs What is in the box: Rockford Fosgate Punch P300-12 owner's manual Subwoofer enclosure loaded with one 12" woofer and built-in amplifier Four 10 amp ATO fuses (two installed in enclosure/ two spare) Removable power plug 10" Signal input harness 3mm Allen wrench Remote Punch Level Control Metal mounting bracket (for Punch Level Control) 17.5' Punch Level Control cable (3.5mm plug on both ends) Two 3/8" Punch Level Control mounting screws Hook and Loop mounting straps Installation and Operation manual (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -23% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate P300-12 300W 12" Single Powered Bass Sub Sealed Enclosure Amp $389.99 $499.99

Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or saving space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom-sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground, and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area. General Features: 12" Punch Series Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Proprietary woofer optimized by Rockford Fosgate for this enclosure CEA-2031 Compliant Klippel Verified Proprietary spider venting/cooling technique StampCast basket with integrated spider venting High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Frequency response: 35-150 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty Enclosure General Features: Rockford Fosgate Sealed Enclosure "Closed-loop" design ensures optimum performance between the woofer, amplifier, and enclosure Universal vehicle fitment 5/8" MDF Box material Covered with industrial heat-activated vinyl Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H Weight: 29.6 Lbs. (approx) Amplifier General Features: 300 Watt Class-D monoblock CEA-2006 Compliant Remote bass level control included Intelligent auto turn-on/off function Gain and bass boost control Built-in adjustable bass boost EQ Built-in 0°/180° phase switch Variable 50Hz to 200Hz @ 12dB/Octave Butterworth Removable Connector Power/Ground/Remote Thermal and over-voltage protection High-efficiency, low-current design Low-Level & High-Level Inputs Low-Level: 1 RCA Pair High-Level: Left/Right Summed Inputs What is in the P300-12 package: P300-12 owner's manual Subwoofer enclosure loaded with one 12" woofer and built-in amplifier Four 10 amp ATO fuses Removable power plug 10" Signal input harness 3mm Allen wrench Remote Punch Level Control Metal mounting bracket (for Punch Level Control) 17.5' Punch Level Control cable (3.5mm plug on both ends) Two 3/8" Punch Level Control mounting screws Hook and Loop mounting straps Installation and Operation Manual Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Sold out -3% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate P300-12 300W 12" Single Powered Sealed Enclosure Amp +8 Ga Kit $389.99 $399.99

Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included + Red Amp Kit The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area. General Features: 12" Punch Series Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Proprietary woofer optimized by Rockford Fosgate for this enclosure CEA-2031 Compliant Klippel Verified Proprietary spider venting/cooling technique StampCast basket with integrated spider venting High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Frequency response: 35-150 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty Enclosure General Features: Rockford Fosgate Sealed Enclosure "Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure Universal vehicle fitment 5/8" MDF Box material Covered with industrial heat-activated vinyl Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H Weight: 29.6 Lbs. (approx) Amplifier General Features: 300 Watt Class-D monoblock CEA-2006 Compliant Remote bass level control included Intelligent auto turn on/off function Gain and bass boost control Built-in adjustable bass boost EQ Built-in 0°/180° phase switch Variable 50Hz to 200Hz @ 12dB/Octave Butterworth Removable Connector Power/Ground/Remote Thermal and over-voltage protection High-efficiency, low current design Low-Level & High-Level Inputs Low-Level: 1 RCA Pair High-Level: Left/Right Summed Inputs What is in the box: Rockford Fosgate Punch P300-12 owner's manual Subwoofer enclosure loaded with one 12" woofer and built-in amplifier Four 10 amp ATO fuses (two installed in enclosure/ two spare) Removable power plug 10" Signal input harness 3mm Allen wrench Remote Punch Level Control Metal mounting bracket (for Punch Level Control) 17.5' Punch Level Control cable (3.5mm plug on both ends) Two 3/8" Punch Level Control mounting screws Hook and Loop mounting straps Installation and Operation manual (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -48% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate P300X1 Amplifier & P1 2X10" Ported Loaded Enclosure Subwoofer $629.98 $1,199.99

Rockford Fosgate Punch P300X1 & P1-2X10 Mono Punch subwoofer Amplifier with Punch P1 Ported Loaded Enclosure Subwoofer Package Package Includes: (1) Rockford Fosgate P1-2x10 Dual 10" Loaded Enclosure (1) Rockford Fosgate P300X1 Punch 300W Mono Amplifier Our Rockford Fosgate 10" P1-2X10 & P300X1 Loaded Enclosure Subwoofer Package includes dual Rockford Fosgate 10" P1 subwoofers in a loaded enclosure along with the Rockford Punch 300-watt mono amplifier. The Package also includes the subwoofers, the amplifier, and a wiring kit. Rockford Fosgate Punch P300X1 300W RMS Punch Series Monoblock Class AB Car Power Amplifier General Features Punch Series Monoblock Class AB Car Amplifier RMS Power Rating: 4 ohms: 200 watts x 1 chan. 2 ohms: 300 watts x 1 chan. 1 ohm: ----------N/A----------- CEA-2006 compliant amplifier Features C.L.E.A.N. Set-up with the 10-step set-up procedure w/ input/output clip detection and indicator LEDs MOSFET power supply Muted turn on Cast aluminum heatsink 12dB/octave Butterworth crossover Stealth top-mounted control panel LED power, thermal, and protection indicators Nickel-plated captive C-clamp terminals Ultra-efficient Class BD circuitry to maximize amplifier power efficiency On-board differential inputs eliminate noise picked up by the signal cable Optional PLC2 remote Punch Level Control ready with input clip indicator Optional RFIF2SW High-level input capable with Auto Turn-On circuit ( MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low DSM (Discrete Surface Mounted Components) utilizes 1% tight-tolerances, improving the efficiency of the circuit and lowering the operating temperature and potential for noise, similar to circuit boards designed by aerospace manufacturers Input sensitivity: 150mV - 12V On-board Punch EQ Bass: 0dB to +18dB boost @ 45Hz. Treble: 0dB to +12dB boost @ 12.5 kHz. Function depends upon the LP/AP/HP switch position Selectable crossover modes: LP / AP / HP Variable crossover filter: 50- 250Hz Frequency response: 20 - 20,000Hz Total Harmonic Distortion: <1.0% Dimensions: 9-7/8"L x 7-3/4"W x 2-3/8"H 8 AWG to 18 AWG speaker wire output terminals Rockford Fosgate P1-2X10 Punch P1 Dual Subwoofer Loaded Enclosure Enclosure Features: Dual 10" Loaded, Ported Box Solid 5/8" MDF Construction Front-firing tuned port Spring-loaded binding posts Complete with high-density black box carpeting Dimensions: 15-1/8"D x 31-1/8"W x 13-1/8"H Subwoofer Features: 10" Punch Stage 1 Subwoofers Power Handling: Peak: 1000 watts total (500 watts each) RMS: 500 watts total (250 watts each) Recommended power range: 250 - 500 watts RMS @ 2 ohms CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16-gauge compound bend frame geometry High modulus Kevlar reinforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced-strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-cast aluminum soft-touch painted trim ring allows for optional integrated grill Stamped Mesh Grille Insert Available: Rockford Fosgate P1G-10 [Rockford Fosgate P1 Series] Magnet Weight: 45 oz Frequency Response: 23 - 250 Hz Xmax: 9mm Sensitivity: 84 dB @ 1 watt / 1 meter Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -46% sale

Rockford Fosgate P300X1 Amplifier & P1 2X12

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate P300X1 Amplifier & P1 2X12" Ported Loaded Enclosure Subwoofer $659.98 $1,199.99

Rockford Fosgate Punch P300X1 & P1-2X12 Mono Punch subwoofer Amplifier with Punch P1 Ported Loaded Enclosure Subwoofer Package Package Includes: (1) Rockford Fosgate P1-2x12 Dual 12" Loaded Enclosure (1) Rockford Fosgate P300X1 Punch 300W Mono Amplifier Our Rockford Fosgate 10" P1-2X12 & P300X1 Loaded Enclosure Subwoofer Package includes dual Rockford Fosgate 12" P1 subwoofers in a loaded enclosure along with the Rockford Punch 300-watt mono amplifier. Our Rockford Fosgate 12" P1-2X12 & P300X1 Loaded Enclosure Subwoofer Package includes the subwoofers, the amplifier, and a wiring kit. General Features Punch Series Monoblock Class AB Car Amplifier RMS Power Rating: 4 ohms: 200 watts x 1 chan. 2 ohms: 300 watts x 1 chan. CEA-2006 compliant amplifier Features C.L.E.A.N. Set-up with 10-step set-up procedure w/ input/output clip detection and indicator LEDs MOSFET power supply Muted turn on Cast aluminum heatsink 12dB/octave Butterworth crossover Stealth top-mounted control panel LED power, thermal, and protection indicators Nickel-plated captive C-clamp terminals Ultra-efficient Class BD circuitry to maximize amplifier power efficiency On-board differential inputs eliminate noise picked up by the signal cable Optional PLC2 remote Punch Level Control ready with input clip indicator Optional RFIF2SW High-level input capable with Auto Turn-On circuit ( MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances, improving the efficiency of the circuit and lowering the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers Input sensitivity: 150mV - 12V On-board Punch EQ Bass: 0dB to +18dB boost @ 45Hz. Treble: 0dB to +12dB boost @ 12.5kHz. Function depends upon LP/AP/HP switch position Selectable crossover modes: LP / AP / HP Variable crossover filter: 50-250Hz Frequency response: 20 - 20,000Hz Total Harmonic Distortion: <1.0% Dimensions: 9-7/8"L x 7-3/4"W x 2-3/8"H 8 AWG to 18 AWG speaker wire output terminals Subwoofer Features: 12" Punch Stage 1 Subwoofers Power Handling: Peak: 1000 watts total (500 watts each) RMS: 500 watts total (250 watts each) Recommended power range: 250 - 600 watts RMS @ 2 ohms CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-cast aluminum soft-touch painted trim ring allows for optional integrated grill Stamped Mesh Grille Insert Available: Rockford Fosgate P1G-10 [Rockford Fosgate P1 Series] Magnet Weight: 45 oz Frequency Response: 20 - 250 Hz Xmax: 9mm Sensitivity: 84 dB @ 1 watt / 1 meter Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -42% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate P300X2 300W 2-Channel Power Amp Class AB $279.99 $479.98

Rockford Fosgate Punch P300X2 300W RMS Punch Series 2-Channel Stereo Class AB Car Power Amplifier The Punch P300X2 is a 2-channel stereo amplifier capable of producing 150 Watts into each channel at 2-ohms. It is great for driving a pair of coaxial speakers, component speakers, or a single subwoofer. The amplifier can also be run simultaneously in stereo/mono mode when using passive crossovers (not supplied) on all speakers. With proven PUNCH technology, the P300X2 delivers real Rockford Fosgate power from a small design and is flexible enough to accommodate any moderately sized system. General Features: Punch Series 2-Channel Class AB Car Amplifier RMS Power Rating: 4 ohms: 100 watts x 2 Channel 2 ohms: 150 watts x 2 Channel Bridged, 4 ohms: 300 watts x 1 chan. CEA-2006 compliant amplifier Features C.L.E.A.N. Set-up with input/output clip detection and indicator LEDs MOSFET power supply Muted turn on Cast aluminum heatsink 12dB/octave Butterworth crossover Stealth top-mounted control panel LED power, thermal, and protection indicators Nickel-plated captive C-clamp terminals Ultra-efficient Class BD circuitry to maximize amplifier power efficiency On-board differential inputs eliminate noise picked up by the signal cable Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator) High-level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately) MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low DSM (Discrete Surface Mounted Components) utilizes 1% tight-tolerances, improving the efficiency of the circuit and lowering the operating temperature and potential for noise, similar to circuit boards designed by aerospace manufacturers Input sensitivity: 150mV - 12V What is in the box: 2-Channel amplifier Four 1-1/2" Screws 5mm Allen wrench Quick setup instructions Certificate of Performance Rockford Fosgate Punch P300X2 owner's manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -42% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate P300X2 Punch 300 Watt 2-Channel Amplifier $279.99 $479.98

Rockford Fosgate Punch P300X2 300W RMS Punch Series 2-Channel Stereo Class AB Car Power Amplifier The Punch P300X2 is a 2-channel stereo amplifier capable of producing 150 Watts into each channel at 2-ohms. It is great for driving a pair of coaxial speakers, component speakers, or a single subwoofer. The amplifier can also be run simultaneously in stereo/mono mode when using passive crossovers (not supplied) on all speakers. With proven PUNCH technology, the P300X2 delivers real Rockford Fosgate power from a small design and is flexible enough to accommodate any moderately sized system. General Features: Punch Series 2-Channel Class AB Car Amplifier RMS Power Rating: 4 ohms: 100 watts x 2 Channel 2 ohms: 150 watts x 2 Channel Bridged, 4 ohms: 300 watts x 1 chan. CEA-2006 compliant amplifier Features C.L.E.A.N. Set-up with input/output clip detection and indicator LEDs MOSFET power supply Muted turn on Cast aluminum heatsink 12dB/octave Butterworth crossover Stealth top-mounted control panel LED power, thermal, and protection indicators Nickel-plated captive C-clamp terminals Ultra-efficient Class BD circuitry to maximize amplifier power efficiency On-board differential inputs eliminate noise picked up by the signal cable Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator) High-level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately) MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low DSM (Discrete Surface Mounted Components) utilizes 1% tight-tolerances, improving the efficiency of the circuit and lowering the operating temperature and potential for noise, similar to circuit boards designed by aerospace manufacturers Input sensitivity: 150mV - 12V What is in the box: 2-Channel amplifier Four 1-1/2" Screws 5mm Allen wrench Quick setup instructions Certificate of Performance Rockford Fosgate Punch P300X2 owner's manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Find anything you need

Products (12538)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER