Products – Page 922 – absoluteusa

Mr. Dj DSP4000 PA DJ 15" 4000W Bluetooth DSP FM Speaker & Stand $259.99 $519.99

Mr. Dj DSP4000 15" 4000 Watts 2 Way Portable Speaker with Bluetooth, FM Radio, USB/SD & DSP Player Technology Portable PA DJ Speaker Microphone Remote & MR DJ Speaker Stand Mr. Dj DSP4000 15" 4000 Watts 2 Way Portable Speaker with Bluetooth, FM Radio, USB/SD & DSP Player Technology Portable PA DJ Speaker Microphone Remote More Than Just Another Great MR DJ Sound System, The New MR DJ USA Professional Pro Series Does Everything You Demand in a No-Compromise Family of Professional Loudspeakers. These Speakers Solve Every Performance and Installation Challenge You Have. They are High-Performance in Every Sense: Their New Transducers and Amplifiers Enable Them to Play Extremely Loud and Clear, Without Compromise or Restriction. And They are "High-Performance" From a Concept and Manufacturing Standpoint. MR DJ Made Sure That Every Aspect of Their Design Outperformed What It Had to Do. The result is Loudspeakers That Achieve a Level of Excellence and Refinement That Defies Expectations. Defies Your Expectations. Designed and Tuned in the USA Mr. Dj DSP4000 15" 4000 Watts 2 Way Portable Speaker with Bluetooth, FM Radio, USB/SD & DSP Player Technology Portable PA DJ Speaker Microphone Remote General Features: 15" 2-way portable speaker with Bluetooth, FM Radio, USB/SD DSP player Technology Peak Power: 4000 Watts P.M.P.O RMS Power: 150 Watts Amplifier Class D, woofer 15", voice coil 2", Magnet 40 oz, tweeter 1" driver, crossover 3Khz/12dB PTC driver protect Frequency Range: 45-20000Hz Built-in Bluetooth Technology, built-in DSP player, Mp3, LCD player, USB, and SD card input, RCA input/output, aux line-in, multi-preset EQ modes, 5 band EQ Built-in Subwoofer, Guitar/Microphone input, bass and Treble controls, Talk over a button, wire microphone and remote control included Dimension: 17.72"x 15.16"x 25.4" Package included: 1x Portable Active Speaker 1x Remote Control 1x Wire Microphone 1x Power Cable Product Manual Mr. Dj SS-300 Folding Tripod DJ Speaker Stand Mr. Dj SS-300 Folding Tripod DJ Speaker Stand telescopes to 6 ft and supports up to 80 pounds on a 1 3/8-inch diameter pipe.Product Features: Load Capacity 80lbs Maximum Height 6 Ft Heavy Duty and Portable Pipe Diameter of 1 3/8 inch ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out

Mr. Dj Fantasy-3000 High Powered Professional Bubble Machine and Remote $249.99

Template By Froo! Mr. Dj Fantasy-3000 High Powered Professional Bubble Machine and Remote Mr. Dj Fantasy-3000 Professional Bubble Machine for Parties and DJ Events Professional Bubble Machine for Parties and DJ Events High powered bubble machine Remote Included Bubbles rise into the air Bubble fluid sold separately Product Dimensions: 20 x 16 x 19 inches ; 12 pounds Shipping Weight: 23.4 pounds About Us About Us Online Pro Music strives to offer our customers with quality products in the car audio & pro audio at the lowest prices possible! We have many years of experience distributing brand name car audio products worldwide. Payment Payment We accept payment by: Paypal. Shipping Shipping We take great care packaging every item to ensure safe shipment to you. We charge a shipping fee only to cover our costs of materials and labor. Once your order has been processed and we have received cleared payment, your item will be dispatched as soon as possible. Terms Terms We warrantee and represent that the goods are as described in the above listing. We specifically disclaim any implied warranties of title, merchantability, fitness for a particular purpose and non-infringement. Customers should satisfy themselves that any item choice made is suitable for their intended purpose or use. We pride ourselves on our customer service. In the rare event that you have a problem with your item please contact us and we'll be happy to help. Returns Returns We allow a return for a refund within 30 days from date of purchase. All returns must include all original items , unused, undamaged, in re-sellable condition, with all original packaging including manuals, warranty forms, etc. Shipping and handling fees are not refundable. Buyer is responsible for shipping costs incurred for returning products back for refund or exchange. There will be a 20% restocking fees for all returns. The amount refunded will also have a deduction of shipping costs incurred by Seller when shipping items to Buyer, including items purchased with "FREE SHIPPING". No returns will be accepted without prior authorization.Please inspect your shipment upon arrival and report any shipping related damage to us immediately within 3 days. You may also be interested in..... View more great items Template by Froo Apps Froo Frooition www.froo.com | selling manager applications, eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design View more great items

-51% sale

Mr. Dj HD-300 Titanium DJ Compression Screw-on Horn PA Speaker Driver Tweeter

00
DAYS 00
HRS 00
MIN 00
SEC

Mr. Dj HD-300 Titanium DJ Compression Screw-on Horn PA Speaker Driver Tweeter $34.99 $69.99

Mr. Dj HD300 Titanium DJ Compression Screw-on Horn PA Speaker Driver Tweeter The MR DJ high-power super tweeter possesses extraordinary sensitivity thanks to a phenolic diaphragm, which has unique properties of stiffness and damping. By fluid cooling, the voice coil, increased power handling, and controlled low-frequency behavior is assured. Mr DJ HD-300 300 watts Max Professional Grade Titanium Compression Tweeter Horn Driver, Replacement Speaker, Horn Driver for JBL, Peavey, Cerwin Vega, Gemini, EMB, YAMAHA, ELECTRA VOICE, EV, Pyle-Pro, Mr.DJ & Many Other Brands General Features: Replacement High-Quality Compression Horn Driver High-Efficiency Ceramic Tweeter Frequency response: 800Hz -22000Hz Fits horns with 1 ⅜” X 18 TPI threads For use with 4~16 Ohm applications Max Power Handling: 300W Size 3" Round x 1 1/2 Deep" Threaded Mounting Shaft High Impact ABS Black Housing Midrange/tweeter compression horn driver Titanium diaphragm Terminals 205 Type 300 Watts Max Sensitivity 100 dB Fits Horns with 1-3/8" x 18 TPI Threads Frequency Range:800Hz-20kHz Type: 25mm Titanium Compression Tweeter Driver GOLD Terminals 2501: Nominal impedance:8ohm(AC) power capacity:20W sensitivity:105db/m.w diaphragm material: Titanium voice coil: Kapton25.4-CCAW magnet:11oz Horn Coupling:1 3/8” 18TPI Power Handling: 300 Watt Each Voice Coil Diameter: 25mm Weight: 1.5Lbs Each Diaphragm: Titanium Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-51% sale

Mr. Dj HD300 Titanium Screw-on Horn PA DJ Speaker Driver Tweeter

00
DAYS 00
HRS 00
MIN 00
SEC

Mr. Dj HD300 Titanium Screw-on Horn PA DJ Speaker Driver Tweeter $34.99 $69.99

Mr. Dj HD300 Titanium DJ Compression Screw-on Horn PA Speaker Driver Tweeter The MR DJ high-power super tweeter possesses extraordinary sensitivity thanks to a phenolic diaphragm, which has unique properties of stiffness and damping. By fluid cooling, the voice coil, increased power handling, and controlled low-frequency behavior is assured. Mr DJ HD-300 300 watts Max Professional Grade Titanium Compression Tweeter Horn Driver, Replacement Speaker, Horn Driver for JBL, Peavey, Cerwin Vega, Gemini, EMB, YAMAHA, ELECTRA VOICE, EV, Pyle-Pro, Mr.DJ & Many Other Brands General Features: Replacement High-Quality Compression Horn Driver High-Efficiency Ceramic Tweeter Frequency response: 800Hz -22000Hz Fits horns with 1 ⅜” X 18 TPI threads For use with 4~16 Ohm applications Max Power Handling: 300W Size 3" Round x 1 1/2 Deep" Threaded Mounting Shaft High Impact ABS Black Housing Midrange/tweeter compression horn driver Titanium diaphragm Terminals 205 Type 300 Watts Max Sensitivity 100 dB Fits Horns with 1-3/8" x 18 TPI Threads Frequency Range:800Hz-20kHz Type: 25mm Titanium Compression Tweeter Driver GOLD Terminals 2501: Nominal impedance:8ohm(AC) power capacity:20W sensitivity:105db/m.w diaphragm material: Titanium voice coil: Kapton25.4-CCAW magnet:11oz Horn Coupling:1 3/8” 18TPI Power Handling: 300 Watt Each Voice Coil Diameter: 25mm Weight: 1.5Lbs Each Diaphragm: Titanium Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-51% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Mr. Dj HDT1000B 4" Titanium Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition $49.99 $99.99

MR DJ HDT1000B 4-Inch Black Titanium Horn Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT1000B 4" heavy-duty titanium super tweeters. MR DJ 4-inch square high compression titanium bullet tweeter features flat sides that allow for close side by side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can handle high frequencies with ease and meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system.General Features: 4" Titanium Bullet High Compression Tweeter 11 Oz Ferrite Magnet mounting depth of 2-1/2" High-Temperaturerature Kapton Voice Coil, Peak Power Handling- 500W (Per Tweeter) @ 8-Ohm RMS Power Handling: 100W (Per Tweeter) @ 8-Ohm Peak Power Handling- 1500W (Per Tweeter) @ 4-Ohm RMS Power Handling: 450W (Per Tweeter) @ 4-Ohm Impedance 8 OHMS, Crossover Capacitor Included 1.75" High-Temperature Kapton Voice Coil Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-51% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Mr. Dj HDT1000B 4-Inch ( 4" ) Titanium Bullet High Compression Tweeter (Black) $49.99 $99.99

MR DJ HDT1000B 4-Inch Black Titanium Horn Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT1000B 4" heavy-duty titanium super tweeters. MR DJ 4-inch square high compression titanium bullet tweeter features flat sides that allow for close side by side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can handle high frequencies with ease and meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system.General Features: 4" Titanium Bullet High Compression Tweeter 11 Oz Ferrite Magnet mounting depth of 2-1/2" High-Temperaturerature Kapton Voice Coil, Peak Power Handling- 500W (Per Tweeter) @ 8-Ohm RMS Power Handling: 100W (Per Tweeter) @ 8-Ohm Peak Power Handling- 1500W (Per Tweeter) @ 4-Ohm RMS Power Handling: 450W (Per Tweeter) @ 4-Ohm Impedance 8 OHMS, Crossover Capacitor Included 1.75" High-Temperature Kapton Voice Coil Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-51% sale

Mr. Dj HDT1000S 4-Inch 500W Titanium Bullet High Compression Tweeter (Chrome)

00
DAYS 00
HRS 00
MIN 00
SEC

Mr. Dj HDT1000S 4-Inch 500W Titanium Bullet High Compression Tweeter (Chrome) $49.99 $99.99

MR DJ HDT1000S 4-Inch Titanium Horn Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT1000S 4" heavy-duty titanium super tweeters. MR DJ 4-inch square high compression titanium bullet tweeter features flat sides that allow for close side by side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can handle high frequencies with ease and meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system.General Features: 4" Titanium Bullet High Compression Tweeter 11 Oz Ferrite Magnet mounting depth of 2-1/2" High-Temperaturerature Kapton Voice Coil, Peak Power Handling- 500W (Per Tweeter) @ 8-Ohm RMS Power Handling: 100W (Per Tweeter) @ 8-Ohm Peak Power Handling- 1500W (Per Tweeter) @ 4-Ohm RMS Power Handling: 450W (Per Tweeter) @ 4-Ohm Impedance 8 OHMS, Crossover Capacitor Included 1.75" High-Temperature Kapton Voice Coil Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-51% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Mr. Dj HDT1000S 4-Inch Titanium Bullet High Compression Tweeter with 11 Ounce Ferrite Magnet (Chrome) $49.99 $99.99

MR DJ HDT1000S 4-Inch Titanium Horn Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT1000S 4" heavy-duty titanium super tweeters. MR DJ 4-inch square high compression titanium bullet tweeter features flat sides that allow for close side by side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can handle high frequencies with ease and meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system.General Features: 4" Titanium Bullet High Compression Tweeter 11 Oz Ferrite Magnet mounting depth of 2-1/2" High-Temperaturerature Kapton Voice Coil, Peak Power Handling- 500W (Per Tweeter) @ 8-Ohm RMS Power Handling: 100W (Per Tweeter) @ 8-Ohm Peak Power Handling- 1500W (Per Tweeter) @ 4-Ohm RMS Power Handling: 450W (Per Tweeter) @ 4-Ohm Impedance 8 OHMS, Crossover Capacitor Included 1.75" High-Temperature Kapton Voice Coil Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-51% sale

Mr. Dj HDT500S 600W Pair Slim 4-Inch Titanium Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition

00
DAYS 00
HRS 00
MIN 00
SEC

Mr. Dj HDT500S 600W Pair Slim 4-Inch Titanium Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition $39.99 $79.99

MR DJ HDT500S 600 Watts Pair Slim 4-Inch Titanium Horn Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT500S Pair 4" Slim titanium super tweeters. MR DJ 4-inch square high compression titanium bullet tweeter features flat sides that allow for close side by side mounting. With a high-frequency response and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can handle high frequencies with ease and meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system.General Features: 4" Pair Slim Titanium Bullet High Compression Tweeter 5.4 Oz Ferrite Magnet mounting depth of 1-1/2" High-Temperaturerature Kapton Voice Coil, Peak Power Handling- 600W,300W (Per Tweeter) @ 4-Ohm RMS Power Handling: 100W, 50W (Per Tweeter) @ 4-Ohm Impedance 4 OHMS, Crossover Capacitor Included 1.75" High-Temperature Kapton Voice Coil Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Signal To Noise Ratio: 91dB Audio Sensitivity: 109dB Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-69% sale

Mr. Dj HDT700B 3.5-in Titanium Bullet Tweeter w/ 10 Ounce Ferrite Magnet (Black)

00
DAYS 00
HRS 00
MIN 00
SEC

Mr. Dj HDT700B 3.5-in Titanium Bullet Tweeter w/ 10 Ounce Ferrite Magnet (Black) $24.99 $79.99

Mr. Dj HDT700B 3.5-inch Titanium Bullet High Compression Tweeter with 10 Ounce Ferrite Magnet (Black) for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT700B 3.5" heavy-duty titanium super tweeters. MR DJ 3.5-inch square high compression titanium bullet tweeter features flat sides that allow for close side by side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can handle high frequencies with ease and meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system. General Features: 3.5" Titanium Bullet Super Tweeter 1" High-Temperature Kapton Voice Coil 10 oz Ferrite Magnet Structure Peak Power Handling- 300W (Per Tweeter) RMS Power Handling: 50W (Per Tweeter) Black Cutting Finish Die-Cast Aluminum Frame Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-51% sale

Mr. Dj HDT700B 3.5-Inch Titanium Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition

00
DAYS 00
HRS 00
MIN 00
SEC

Mr. Dj HDT700B 3.5-Inch Titanium Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition $39.99 $79.99

Mr. Dj HDT700B 3.5-Inch Titanium Bullet High Compression Tweeter with 10 Ounce Ferrite Magnet (Black) for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT700B 3.5" heavy-duty titanium super tweeters. MR DJ 3.5-inch square high compression titanium bullet tweeter features flat sides that allow for close side by side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can handle high frequencies with ease and meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system. General Features: 3.5" Titanium Bullet Super Tweeter 1" High-Temperature Kapton Voice Coil 10 oz Ferrite Magnet Structure Peak Power Handling- 300W (Per Tweeter) RMS Power Handling: 50W (Per Tweeter) Black Cutting Finish Die-Cast Aluminum Frame Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-69% sale

Mr. Dj HDT700S 3.5-Inch Titanium Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition

00
DAYS 00
HRS 00
MIN 00
SEC

Mr. Dj HDT700S 3.5-Inch Titanium Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition $24.99 $79.99

Mr. Dj HDT700S 3.5-Inch Titanium Bullet High Compression Tweeter with 10 Ounce Ferrite Magnet (Chrom) for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition MR DJ HDT700S 3.5" heavy-duty titanium super tweeters. MR DJ 3.5-inch square high compression titanium bullet tweeter features flat sides that allow for close side-by-side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. MR DJ Professional grade super tweeters that can handle high frequencies with ease and meticulously designed these tweeters to sound as good as they look. MR DJ Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. MR DJ Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system. General Features: 3.5" Titanium Bullet Super Tweeter 1" High-Temperature Kapton Voice Coil 10 oz Ferrite Magnet Structure Peak Power Handling- 300W (Per Tweeter) RMS Power Handling: 50W (Per Tweeter) Black Cutting Finish Die-Cast Aluminum Frame Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Find anything you need

Products (14136)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER