Products – Page 919 – absoluteusa

Rockford Fosgate Punch P1-2X12<BR/>1000W Peak Punch P1 Dual 12

Rockford Fosgate Punch P1-2X12
1000W Peak Punch P1 Dual 12" Loaded Subwoofer Enclosure Ported $409.99 $699.99

Rockford Fosgate Punch P1-2X12 1000W Peak Dual 12" Loaded Subwoofer Enclosure Ported The most convenient way to get low-frequency bass in your system is to drop-in a Punch loaded enclosure. We're not talking junk in the trunk, we're talking the same genuine Punch woofers available separately. The P1-2X12 is dual 12” Punch P1 SVC subwoofers in a Rockford Fosgate built vented enclosure, with a power handling of 500 Watts RMS and wired to a 2-Ohm load. Rockford Fosgate’s Punch loaded enclosures are constructed with durable 5/8" MDF and tuned by our computer aided design software to ensure quality sound and high output. Punch P1 loaded enclosures feature similar tonal performance as our P2 & P3 models, but are easier to move in-n-out of vehicles due General Features: Two 12" Single 4-ohm Punch Stage 1 Subwoofers Total Power Handling: Peak: 1000 watts RMS: 500 watts Recommended power range: 250 - 600 watts RMS @ 2-ohm CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16-gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surrounds for larger surface area. Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design. Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate. High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar. The die-Cast aluminum soft-touch painted trim ring allows for the optional integrated grill. Stamped Mesh Grille Insert Available: Rockford Fosgate P1G-12 Magnet Weight: 45 oz Frequency Response: 20 - 250 Hz Xmax: 9mm Enclosure Features: Dual 12" Loaded, Ported Box Solid 5/8" MDF Construction Front-firing tuned port. Spring-loaded binding posts Complete with high-density black box carpeting Dimensions: 15-1/8"D x 33-7/8"W x 15-3/4"H ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -42% sale

Rockford Fosgate Punch P1000X1bd <br/> P1000X1bd Mono subwoofer amplifier 1,000 watts RMS x 1 at 1 ohm

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P1000X1bd
P1000X1bd Mono subwoofer amplifier 1,000 watts RMS x 1 at 1 ohm $499.99 $859.98

Rockford Fosgate Punch P1000X1bd Mono subwoofer amplifier 1,000 watts RMS x 1 at 1 ohm The Punch P1000X1bd mono amplifier pumps out 1,000 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response is optimized for subwoofers. With its super-efficient Class-BD circuit topology, the P1000X1bd assures maximum BOOM for your buck! Due to its dedicated low-frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will easily drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers. General Features: Punch BD Series Monoblock Class BD Car Amplifier RMS Power Rating: 4 ohms: 300 watts x 1 channel 2 ohms: 500 watts x 1 channel 1 ohm: 1000 watts x 1 channel CEA-2006 compliant amplifier Features C.L.E.A.N. Set-up with the 10-step set-up procedure w/ input/output clip detection and indicator LEDs MOSFET power supply Muted turn on Cast aluminum heatsink 12dB/octave Butterworth crossover Stealth top-mounted control panel LED power, thermal, and protection indicators Nickel-plated captive C-clamp terminals Ultra-efficient Class BD circuitry to maximize amplifier power efficiency On-board differential inputs eliminate noise picked up by the signal cable Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator) High-level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately) MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowering the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers Input sensitivity: 150mV - 12V On-board Punch EQ with +18dB boost @ 45Hz. Variable low-pass filter: 50-250 Hz Selectable infrasonic filter: off / 28 Hz Frequency response: 20 - 250 Hz Total Harmonic Distortion: <1.0% Dimensions: 13-5/16"L x 7-3/4"W x 2-3/8"H 8 AWG to 18 AWG speaker wire output terminals 4 gauge power and ground wiring is recommended for installation. Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P1000X1bd package: P1000X1bd owner's manual Mono subwoofer amplifier Four 1-1/2" Self-tapping screws 5mm Allen wrench Quick setup instructions ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-38% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P1000X1bd Mono subwoofer amplifier 1,000 watts RMS x 1 at 1 ohm $499.99 $799.99

Rockford Fosgate Punch P1000X1bd Mono subwoofer amplifier 1,000 watts RMS x 1 at 1 ohm The Punch P1000X1bd mono amplifier pumps out 1,000 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response is optimized for subwoofers. With its super-efficient Class-BD circuit topology, the P1000X1bd assures maximum BOOM for your buck! Due to its dedicated low-frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will easily drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers. General Features: Punch BD Series Monoblock Class BD Car Amplifier RMS Power Rating: 4 ohms: 300 watts x 1 channel 2 ohms: 500 watts x 1 channel 1 ohm: 1000 watts x 1 channel CEA-2006 compliant amplifier Features C.L.E.A.N. Set-up with the 10-step set-up procedure w/ input/output clip detection and indicator LEDs MOSFET power supply Muted turn on Cast aluminum heatsink 12dB/octave Butterworth crossover Stealth top-mounted control panel LED power, thermal, and protection indicators Nickel-plated captive C-clamp terminals Ultra-efficient Class BD circuitry to maximize amplifier power efficiency On-board differential inputs eliminate noise picked up by the signal cable Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator) High-level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately) MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowering the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers Input sensitivity: 150mV - 12V On-board Punch EQ with +18dB boost @ 45Hz. Variable low-pass filter: 50-250 Hz Selectable infrasonic filter: off / 28 Hz Frequency response: 20 - 250 Hz Total Harmonic Distortion: <1.0% Dimensions: 13-5/16"L x 7-3/4"W x 2-3/8"H 8 AWG to 18 AWG speaker wire output terminals 4 gauge power and ground wiring is recommended for installation. Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P1000X1bd package: P1000X1bd owner's manual Mono subwoofer amplifier Four 1-1/2" Self-tapping screws 5mm Allen wrench Quick setup instructions ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Sold out -36% sale

Rockford Fosgate Punch P1000X2 2-channel car amplifier 300 watts RMS x 2

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P1000X2 2-channel car amplifier 300 watts RMS x 2 $499.99 $769.99

Rockford Fosgate Punch P1000X2 2-channel car amplifier 300 watts RMS x 2 Big power for your speakers or subwoofersRockford Fosgate's Punch P1000X2 amplifier sends 300 watts RMS to each of a pair of high-performance speakers or subs, filling your ride with plenty of loud, clean music. You can use the high-pass filter to keep the low bass out of your speakers so they perform more efficiently. You can also switch this versatile amp into mono mode to drive a sub with up to 1000 watts RMS, then use the built-in low-pass filter to send the correct bass frequencies to your sub. The Punch EQ2 features a bass and treble boost, in case you want to add a little boom and sizzle back into the mix. Easy to set for optimum performanceOnce again, Rockford Fosgate steps away from the crowd with their C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) — a setup system that ensures your music will sound as clean and powerful as possible. It works like this: first download the setup tones from Rockford Fosgate, then play the tone, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It's that simple — your amplifier will be perfectly set to match your receiver's output. When your receiver reaches maximum clean volume, you'll get maximum clean power from your Power amp. At quiet listening levels, you'll hear less background noise and more of your music. Keeps an eye on things while playingIf that blue light turns solid red while you're playing music, the amp's telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music's clipping. The amp's built-in computer keeps tabs on the output current, ensuring that plunging speaker impedances (they change during play) or even a short circuit won't hurt anything. Maintaining coolness raises efficiency and lowers distortionRockford Fosgate's Dynamic Thermal Management system uses forced air to dissipate heat evenly across the amp and out through the high-mass heatsink, efficiently drawing heat away from vital internal parts. Their proprietary MEHSA cooling process maximizes the heat transfer from the MOSFET devices to the heatsink, allowing the heat to escape more readily, so the transistors stay cooler and work better. Product highlights: 2-channel car amplifier 300 watts RMS x 2 at 4 ohms (500 watts RMS x 2 at 2 ohms) 1000 watts RMS x 1 bridged at 4 ohms (4-ohm stable in bridged mode) CEA-2006 compliant Features: variable high- and low-pass filter filter (50-250 Hz, 12 dB/octave) variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz) C.L.E.A.N. gain setup system includes clip lights and link to Rockford Fosgate's setup tones Class-AB amplifier design frequency response: 20-20K Hz Dynamic Thermal Management and MEHSA MOSFET cooling systems MOSFET power and output stages preamp inputs and outputs speaker-level inputs (speaker wire to RCA adapter required) signal-sensing turn-on with speaker-level inputs eliminate need for remote turn-on lead More Info: optional PLC2 wired remote level control with clip light available 4-gauge power and ground leads and an 140-amp fuse recommended — wiring and hardware not included with amplifier no onboard fuses — when installing multiple amps in a system, an additional 140-amp in-line fuse between the distribution block and the amplifier is recommended 15-1/8"W x 2-7/16"H x 7-13/16"D warranty: 1 year ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-17% sale

Rockford Fosgate Punch P1000X5 5-channel car amplifier 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P1000X5 5-channel car amplifier 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm $629.99 $749.99

Rockford Fosgate Punch P1000X5 5-channel car amplifier 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm Big power for your whole systemRockford Fosgate's Punch P1000X5 amplifier can power your entire system, delivering 75 watts RMS to each of your front and rear speakers, along with up to 500 watts RMS to a subwoofer. The sub channel's low-pass and subsonic filters come in handy for getting the right sound from your sub/enclosure combo, and you can use the amp's high-pass filters to remove the bass from your full-range speakers so they'll play more efficiently. The Punch EQ2 includes bass and treble boosts, in case you want to liven up the mix. Not worried about rear speakers? You can also switch this amp into 3-channel mode to drive a couple of high-performance components with 250 watts RMS each while still powering a sub with up to 500 watts. Easy to set for optimum performanceOnce again, Rockford Fosgate steps away from the crowd with their C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) — a setup system that ensures your music will sound as clean and powerful as possible. It works like this: first download the setup tones from Rockford Fosgate, then play the tone, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It's that simple — your amplifier will be perfectly set to match your receiver's output. When your receiver reaches maximum clean volume, you'll get maximum clean power from your Power amp. At quiet listening levels, you'll hear less background noise and more of your music. Keeps an eye on things while playingIf that blue light turns solid red while you're playing music, the amp's telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music's clipping. The amp's built-in computer keeps tabs on the output current, ensuring that plunging speaker impedances (they change during play) or even a short circuit won't hurt anything. Eliminating heat raises efficiency and lowers distortionRockford Fosgate's Dynamic Thermal Management system uses forced air to dissipate heat evenly across the amp and out through the high-mass heatsink, efficiently drawing heat away from vital internal parts. Their proprietary MEHSA cooling process maximizes the heat transfer from the MOSFET devices to the heatsink, allowing the heat to escape more readily, so the transistors stay cooler and work better. Product highlights: 5-channel car amplifier 75 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms 125 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms 250 watts RMS x 2 bridged at 4 ohms + 500 watts RMS at 1 ohm CEA-2006 compliant Features: variable high- and low-pass filters (50-250 Hz, 12 dB/octave) variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz) switchable subsonic filter (28 Hz, 12 dB/octave) on subwoofer channel C.L.E.A.N. gain setup system includes clip lights and link to Rockford Fosgate's setup tones Class-BD amplifier design frequency response: 20-20K Hz Dynamic Thermal Management and MEHSA MOSFET cooling systems MOSFET power and output stages preamp and speaker-level inputs (speaker-level inputs require a speaker wire to RCA adapter) signal-sensing turn-on with speaker-level inputs eliminate need for remote turn-on lead More Info: optional PLC2 wired remote level control with clip light available 4-gauge power and ground leads and an 150-amp fuse recommended — wiring and hardware not included with amplifier no onboard fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended 15-1/8"W x 2-7/16"H x 8-13/16"D warranty: 1 year ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-26% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P1000X5 5-channel car amplifier 75 watts RMS x 4 at 4ohms $629.99 $849.99

Rockford Fosgate Punch P1000X5 5-channel car amplifier — 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer. The P1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels, and run subwoofer(s) off the 5th channel! Known worldwide for brute power, this amplifier offers a higher level of efficiency along with tri-stage protection that covers thermal, over-current, and short circuits. General Features: 5-channel car amplifier 75 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms 125 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms 250 watts RMS x 2 bridged at 4 ohms + 500 watts RMS at 1 ohm CEA-2006 compliant variable high- and low-pass filters (50-250 Hz, 12 dB/octave) variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz) switchable subsonic filter (28 Hz, 12 dB/octave) on subwoofer channel L.E.A.N. gain setup system includes test tone CD test tones are also available as MP3 download from Amazon on Demand, Rhapsody, Google Play, and Spotify, labeled "3sixty.3 setup disc" (Punch amps and the 3sixty.3 use the same test tone tracks for setup) Class-BD amplifier design frequency response: 20-20K Hz Dynamic Thermal Management and MEHSA MOSFET cooling systems MOSFET power and output stages preamp and speaker-level inputs (speaker-level inputs require a speaker wire to RCA adapter) signal-sensing turn-on with speaker-level inputs eliminate the need for remote turn-on lead optional PLC2 wired remote level control with clip light available 4-gauge power and ground leads and a 150-amp fuse recommended — wiring and hardware not included with amplifier no onboard fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended. 15-1/8"W x 2-7/16"H x 8-13/16"D What is in the box: 5-Channel amplifier Four 1-1/2" Self-tapping screws 5mm Allen wrench Quick setup instructions Certificate of Performance Setup/Manual disc Rockford Fosgate Punch P1000X5 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Sold out -26% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P1000X5 5-channel car amplifier 75 watts RMS x 4 at 4ohms $629.99 $849.99

Rockford Fosgate Punch P1000X5 5-channel car amplifier — 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer. The P1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels, and run subwoofer(s) off the 5th channel! Known worldwide for brute power, this amplifier offers a higher level of efficiency along with tri-stage protection that covers thermal, over-current, and short circuits. General Features: 5-channel car amplifier 75 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms 125 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms 250 watts RMS x 2 bridged at 4 ohms + 500 watts RMS at 1 ohm CEA-2006 compliant variable high- and low-pass filters (50-250 Hz, 12 dB/octave) variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz) switchable subsonic filter (28 Hz, 12 dB/octave) on subwoofer channel L.E.A.N. gain setup system includes test tone CD test tones are also available as MP3 download from Amazon on Demand, Rhapsody, Google Play, and Spotify, labeled "3sixty.3 setup disc" (Punch amps and the 3sixty.3 use the same test tone tracks for setup) Class-BD amplifier design frequency response: 20-20K Hz Dynamic Thermal Management and MEHSA MOSFET cooling systems MOSFET power and output stages preamp and speaker-level inputs (speaker-level inputs require a speaker wire to RCA adapter) signal-sensing turn-on with speaker-level inputs eliminate the need for remote turn-on lead optional PLC2 wired remote level control with clip light available 4-gauge power and ground leads and a 150-amp fuse recommended — wiring and hardware not included with amplifier no onboard fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended. 15-1/8"W x 2-7/16"H x 8-13/16"D What is in the box: 5-Channel amplifier Four 1-1/2" Self-tapping screws 5mm Allen wrench Quick setup instructions Certificate of Performance Setup/Manual disc Rockford Fosgate Punch P1000X5 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Sold out -26% sale

Rockford Fosgate Punch P1000X5<br/> 1000W RMS Punch Series 5-Channel Stereo Full-Range Class BD Car Amplifier w/ Dedicated Sub Channel

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P1000X5
1000W RMS Punch Series 5-Channel Stereo Full-Range Class BD Car Amplifier w/ Dedicated Sub Channel $629.99 $849.99

Rockford Fosgate Punch P1000X5 5-channel car amplifier — 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer. The P1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels, and run subwoofer(s) off the 5th channel! Known worldwide for brute power, this amplifier offers a higher level of efficiency along with tri-stage protection that covers thermal, over-current, and short circuits. General Features: 5-channel car amplifier 75 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms 125 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms 250 watts RMS x 2 bridged at 4 ohms + 500 watts RMS at 1 ohm CEA-2006 compliant variable high- and low-pass filters (50-250 Hz, 12 dB/octave) variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz) switchable subsonic filter (28 Hz, 12 dB/octave) on subwoofer channel L.E.A.N. gain setup system includes test tone CD test tones are also available as MP3 download from Amazon on Demand, Rhapsody, Google Play, and Spotify, labeled "3sixty.3 setup disc" (Punch amps and the 3sixty.3 use the same test tone tracks for setup) Class-BD amplifier design frequency response: 20-20K Hz Dynamic Thermal Management and MEHSA MOSFET cooling systems MOSFET power and output stages preamp and speaker-level inputs (speaker-level inputs require a speaker wire to RCA adapter) signal-sensing turn-on with speaker-level inputs eliminate the need for remote turn-on lead optional PLC2 wired remote level control with clip light available 4-gauge power and ground leads and a 150-amp fuse recommended — wiring and hardware not included with amplifier no onboard fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended. 15-1/8"W x 2-7/16"H x 8-13/16"D What is in the box: 5-Channel amplifier Four 1-1/2" Self-tapping screws 5mm Allen wrench Quick setup instructions Certificate of Performance Setup/Manual disc Rockford Fosgate Punch P1000X5 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-62% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P132 160W 3.5" 2-Way Full-Range Car Audio Speakers $79.99 $209.99

Rockford Fosgate Punch P132 160W 3.5" 2-Way Full-Range Car Audio Speakers The P132 is a 3.50" 2-way full-range speaker rated at 20 watts RMS and designed for fanatics who need a quality factory replacement driver. Includes two speakers, integrated high-pass crossovers, and mounting hardware. General Features: 3-1/2" Punch Series 2-Way Car Speakers Power Handling: Peak: 80 watts per pair / 40 watts each RMS: 40 watts per pair / 20 watts each Recommended power range: 5 - 20 watts RMS per channel Mineral-filled and polypropylene injection molded cone Butyl rubber surround PEI dome tweeter ICC Crossover hides the crossover for installation without the hassle and a clean look VAST surround provides up to 25% more surface area of the cone CEA-2031 compliant speaker Top-mount Depth: 1.38" 4 ohms impedance Frequency Response: 120 - 22,000 Hz Sensitivity: 95dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the P132 package: Two 3-1/2" Two-way speakers Eight 1-1/4" Allen head screws 3mm Allen head bit 8 Speed clips Installation/Operation manual P132 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Sold out -51% sale

Rockford Fosgate Punch P142 60W Max 4 Inch 2 Way Full Range Car Speakers

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P142 60W Max 4 Inch 2 Way Full Range Car Speakers $99.99 $200.00

Rockford Fosgate Punch P142 60W Max 4 Inch 2 Way Full Range Car Speakers Rockford Fosgate Punch P142 30W RMS 4-Inch 2-Way Full-Range Car Speakers. The P142 is a 4-inch, 2-way full-range speaker rated at 30 watts RMS and designed for fanatics who need a quality factory replacement driver. This car audio package includes two speakers, integrated high-pass crossovers, and mounting hardware, so you have everything you need to get started. Car audio fanatics needing a great-sounding speaker to replace factory-installed garbage will benefit from this Punch series full-range speaker. The P142 offers a Flex Fit basket to ensure compatibility with odd-shaped factory car speaker locations. This coaxial speaker also features an ICC (Integrated Concealed Crossover), eliminating the need to mount any black boxes. General Features: Pair of Rockford Fosgate 4-inch 2-way full-range car audio speakers 60 watts of max power, 30 watts of RMS power Features Flexfit basket design with adapter plate included PEI dome tweeter, butyl midrange rubber surround, and polypropylene cone 4-inch round diameter with a 1.69-inch mounting depth Tweeter has a built-in crossover Nominal impedance: 4 ohms Frequency response: 100Hz-22kHz Peak power: 60 watts RMS power: 30 watts Sensitivity: 86.5 dB Color: Black Dimensions (L x W x H): 4 x 4 x 1.69 inches Weight: 3.2 pounds Quantity: 2 Manufacturer warranty: 1-year warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -54% sale

Rockford Fosgate Punch P165-SI<br/> 240W Peak (120W RMS) 6.5

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P165-SI
240W Peak (120W RMS) 6.5" 2-Way Component System with Internal Crossover $149.99 $319.99

Rockford Fosgate Punch P165-SI 240W Peak (120W RMS) 6.5" 2-Way Component System with Internal Crossover Fanatics that need a great sounding speaker to replace factory installed versions will certainly benefit from this Punch series full range speaker. The P165-SI offers a Flex Fit2™ basket to ensure compatibility with U.S., European, and import vehicles. European installers will love this new "European Basket" to easily fit a variety of VW, Citroen, and Vauxhall models. The system also features an ICC (Integrated Concealed Crossover), eliminating the need to mount any black boxes. The Punch P165_SI is a P1 full-range speaker system featuring a true 6.5" midrange optimized for a wide variety of U.S., European, and import vehicles, and a coaxial mounted tweeter. General Features: 6-1/2" 2-Way Car Component System Power Handling: Peak: 240 watts per set / 120 watts each side RMS: 120 watts per set / 60 watts each side Recommended power range: 10 - 60 watts RMS per channel 6-1/2" mineral-filled polypropylene woofer Santoprene rubber surround Separate 1" PEI dome tweeter Integrated crossover concealed in speaker basket Crossover is built into mid-woofer, less parts less hassle Vertical Attach Surround Technique (VAST) increases cone area 4 ohms impedance Frequency Response: 44-20,000 Hz Top-mount Depth: 2-1/4" Sensitivity: 88 dB Grills Included Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: 2 Woofers 2 Woofer grilles 2 Tweeters (6" speaker wire attached terminated with female quick-slide connectors) 2 Front flush mount brackets 2 Rear flush mount brackets 2 Angled surface mounting housings 2 Tweeter trim rings Two M4x25mm Machine screws Two M4x10mm Machine screws Two M4x15mm Stud bolts Eight 1-1/4" Allen head screws 3mm Allen head bit 8 Speed clips Two 39" Lengths of tweeter speaker wire (each with male quick slides on one end and female quick slides on the other) Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian) Rockford Fosgate P165-SI owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Sold out -55% sale

Rockford Fosgate Punch P1683<BR/> 260W Peak (130W RMS) 6

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P1683
260W Peak (130W RMS) 6" x 8" Punch Series 3-way Full Range Coaxial Speakers $99.99 $219.99

Rockford Fosgate Punch P1683 260W Peak (130W RMS) 6" x 8" Punch Series 3-way Full Range Coaxial Speakers Fanatics that need a great sounding speaker to replace factory installed garbage will certainly benefit from this Punch series full-range speaker. The P1683 offers a Flex Fit™ basket to ensure compatibility with odd shaped factory speaker locations and an ICC (Integrated Concealed Crossover), eliminating the need to mount any black boxes. The P1683 is a 6”x8” 3-way full-range speaker rated at 65 watts RMS designed for fanatics needing a quality factory replacement driver. Includes two speakers, integrated high-pass crossovers, and mounting hardware. General Features 6" x 8" Punch Series 3-way Full Range Speakers Power Handling: Peak: 260 watts per pair / 130 watts each RMS: 130 watts per pair / 65 watts each Recommended power range: 10 - 70 watts RMS per channel Injection-molded mineral-filled polypropylene cone Butyl rubber surround 0.75" PEI Dome tweeter Flexfit basket design OEM Adapter plate included Recessed tweeter mount uses standard 1-3/4" hole CEA-2031 compliant speaker Top-mount Depth: 2.28" 4 ohms impedance Frequency Response: 65 - 24,000 Hz Sensitivity: 90dB Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Find anything you need

Products (12225)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER