Products – Page 912 – absoluteusa

Rockford Fosgate P3SD2-10 1200W Shallow Mount Subwoofers $189.99 $379.98

Rockford Fosgate P3SD2-10 P3SD210 10" 1200W Shallow Mount Car Subwoofers Subs Rockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD2-10 shallow-mount 10" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3-9/16 inches deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 10" Rockford Fosgate Punch Series Shallow-mount Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Recommended power range: 100 - 300 watts RMS Impedance: Dual 2 ohm 2.5" Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone Compressed Sealed Poly-foam Surround ABS/Acrylic Dustcap Assembly Tear and fatigue-resistant poly-cotton spider Dual 10 AWG compression speaker terminals Top-mount depth: 3.50" Cutout diameter: 9.06" Frequency Response: 40 - 250 Hz Sensitivity: 83 dB Xmax: 8.4 mm Magnet weight: 47 oz Resonance Frequency (Fs): 42 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD2-10 package: Rockford Fosgate P3SD2-10 owner's manual One shallow-mount 10" Dual 2-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Sold out -50% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate P3SD2-12 800W 12" Dual 2Ohm Shallow Mount Truck Car Subwoofer $199.99 $399.98

Rockford Fosgate P3SD2-12 P3SD212 12" 800W Shallow Mount Car Subwoofers Subs Rockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD4-12 shallow-mount 12" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3.65" deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 12" Punch Series Shallow-mount Subwoofer Power Handling: Peak: 800 watts Power Handling: RMS: 400 watts Recommended power range: 200 - 400 watts RMS Impedance: Dual 2 ohm 2.5" Dual Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone M-Roll Santoprene surround Anodized aluminum cone and dust cap Dual linear spider with embedded 16 AWG tinsel leads Diamond cut cast aluminum trim ring Shallow Motor Assembly Tear and fatigue-resistant poly-cotton spider StampCast basket with integrated spider venting Dual 10 AWG compression speaker connections Optimized for both sealed and vented enclosures Top-mount depth: 3.65" Cutout diameter: 11.22" Frequency Response: 34 - 250 Hz Sensitivity: 85 dB Xmax: 8.4 mm Magnet weight: 1.45 oz Resonance Frequency (Fs): 34 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD2-12 package: Rockford Fosgate P3SD2-12 owner's manual One shallow-mount 12" Dual 2-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual

Sold out -57% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate P3SD4-10 P3SD410 10" 1200W Shallow Mount Car Subwoofers Subs $189.99 $439.99

Rockford Fosgate P3SD4-10 P3SD410 10" 1200W Shallow Mount Car Subwoofers SubsRockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD4-10 shallow-mount 10" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3-9/16 inches deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 10" Rockford Fosgate Punch Series Shallow-mount Subwoofer Power Handling: Peak: 600 watts Power Handling: RMS: 300 watts Recommended power range: 100 - 300 watts RMS Impedance: Dual 4 ohm 2.5" Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone Compressed Sealed Poly-foam Surround ABS/Acrylic Dustcap Assembly Tear and fatigue-resistant poly-cotton spider Dual 10 AWG compression speaker terminals Top-mount depth: 3.50" Cutout diameter: 9.06" Frequency Response: 40 - 250 Hz Sensitivity: 83 dB Xmax: 8.4 mm Magnet weight: 47 oz Resonance Frequency (Fs): 42 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD4-10 package: Rockford Fosgate P3SD4-10 owner's manual One shallow-mount 10" Dual 4-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

Sold out -50% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate P3SD4-12 12" Shallow Mount Subwoofer Truck Car ATV RV $199.99 $399.98

Rockford Fosgate P3SD4-12 P3SD412 12" 800W Shallow Mount Car Subwoofers Subs Rockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD4-12 shallow-mount 12" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3.65" deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 12" Punch Series Shallow-mount Subwoofer Power Handling: Peak: 800 watts Power Handling: RMS: 400 watts Recommended power range: 200 - 400 watts RMS Impedance: Dual 4 ohm 2.5" Dual Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone M-Roll Santoprene surround Anodized aluminum cone and dust cap Dual linear spider with embedded 16 AWG tinsel leads Diamond cut cast aluminum trim ring Shallow Motor Assembly Tear and fatigue-resistant poly-cotton spider StampCast basket with integrated spider venting Dual 10 AWG compression speaker connections Optimized for both sealed and vented enclosures Top-mount depth: 3.65" Cutout diameter: 11.22" Frequency Response: 34 - 250 Hz Sensitivity: 85 dB Xmax: 8.4 mm Magnet weight: 1.45 oz Resonance Frequency (Fs): 34 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD4-12 package: Rockford Fosgate P3SD4-12 owner's manual One shallow-mount 12" Dual 4-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual

Sold out -50% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate P3SD4-12 800W 12" Dual 4Ohm Shallow Mount Truck Car Subwoofer $199.99 $399.98

Rockford Fosgate P3SD4-12 P3SD412 12" 800W Shallow Mount Car Subwoofers SubsRockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD4-12 shallow-mount 12" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3.65" deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 12" Punch Series Shallow-mount Subwoofer Power Handling: Peak: 800 watts Power Handling: RMS: 400 watts Recommended power range: 200 - 400 watts RMS Impedance: Dual 4 ohm 2.5" Dual Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone M-Roll Santoprene surround Anodized aluminum cone and dust cap Dual linear spider with embedded 16 AWG tinsel leads Diamond cut cast aluminum trim ring Shallow Motor Assembly Tear and fatigue-resistant poly-cotton spider StampCast basket with integrated spider venting Dual 10 AWG compression speaker connections Optimized for both sealed and vented enclosures Top-mount depth: 3.65" Cutout diameter: 11.22" Frequency Response: 34 - 250 Hz Sensitivity: 85 dB Xmax: 8.4 mm Magnet weight: 1.45 oz Resonance Frequency (Fs): 34 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD4-12 package: Rockford Fosgate P3SD4-12 owner's manual One shallow-mount 12" Dual 4-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

Sold out -50% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate P3SD4-12 800W 12" Shallow Mount Truck Car Subwoofer $199.99 $399.98

Rockford Fosgate P3SD4-12 P3SD412 12" 800W Shallow Mount Car Subwoofers Subs Rockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD4-12 shallow-mount 12" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3.65" deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 12" Punch Series Shallow-mount Subwoofer Power Handling: Peak: 800 watts Power Handling: RMS: 400 watts Recommended power range: 200 - 400 watts RMS Impedance: Dual 4 ohm 2.5" Dual Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone M-Roll Santoprene surround Anodized aluminum cone and dust cap Dual linear spider with embedded 16 AWG tinsel leads Diamond cut cast aluminum trim ring Shallow Motor Assembly Tear and fatigue-resistant poly-cotton spider StampCast basket with integrated spider venting Dual 10 AWG compression speaker connections Optimized for both sealed and vented enclosures Top-mount depth: 3.65" Cutout diameter: 11.22" Frequency Response: 34 - 250 Hz Sensitivity: 85 dB Xmax: 8.4 mm Magnet weight: 1.45 oz Resonance Frequency (Fs): 34 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD4-12 package: Rockford Fosgate P3SD4-12 owner's manual One shallow-mount 12" Dual 4-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Sold out -33% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate P400X4 Punch 400 Watt 4 Channel Car Amplifier $339.99 $499.99

Rockford Fosgate Punch P400X4 400W Punch Series 4-Channel Stereo Class AB Car Power Amplifier (P400X.4) The P400X4 is perfect for 4-way front-stage/rear-fill or 3-way front-stage/subwoofer systems. Simply drop a pair of component speakers on the front channels and subs on the rear and BOOM - you got "The PUNCH." With its flexible design, the P400X4 is an excellent amplifier choice for virtually any vehicle. The Punch P400X4 is a 4-channel amplifier producing 100 Watts into all four channels at 2-Ohm. The P400X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels.The stealth top-mounted control panel not only provides a sleek finished look to the amp but also protects the vital controls.Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand. General Features: Rockford Fosgate Punch Series P400X4 Class-AB FullRange 2-Ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 50 watts x 4 channel 2 ohms: 100 watts x 4 channel Bridged, 4 ohms: 200 watts x 2 channel CEA-2006 Compliant Amplifier Features C.L.E.A.N. Set-up with 10-step set-up procedure w/ input/output clip detection and indicator LEDs Pulse Width Modulated MOSFET power supply LED power (blue) and protect (red) indicators Stealth top-mounted control panel Soft start turn-on 4, 3, or 2 channel operation Nickel-plated RCA level inputs Nickel-plated captive C-clamp terminals High-level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately. Up to TWO adapters needed for this amplifier.) 3-way protection circuitry (thermal, overload, and speaker short protection) On-board differential inputs eliminate noise picked up by the signal cable Integrated Trans•ana technology simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowering the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low Input sensitivity: 150mV - 12V Frequency Response: 20 - 20,000 Hz Total Harmonic Distortion (THD): <1.0% Signal to Noise Ration: 105dB Selectable crossover modes: LP / AP / HP Variable crossover filter: 50 - 250 Hz, 12 dB/octave Variable Bass Boost, Punch EQ: 0 to +14 dB bass boost at 12.5kHz Variable Bass Boost, Punch EQ: 0 to +18 dB bass boost at 45Hz Fuse Rating: 60 A x 1 inline fuse recommended, not included 8 - 18 gauge speaker wire connections 4- 8 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information. 8 Gauge is perfect for a full 4-ohm setup, while 4 Gauge is recommended for a full 2-ohm setup Dimensions: 11.03"W x 7.76"L x 2.38"H Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: 4-Channel amplifier Four 1-1/2" Self-tapping screws 2.5mm Allen wrench Quick setup instructions Certificate of Performance Rockford Fosgate Punch P400X4 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -45% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate P500X1BD Punch 500 Watt Class-bd Mono Amplifier + Absolute KIT4 Amp Kit $399.99 $719.99

Rockford Fosgate Punch P500X1BD 500W RMS Punch Series Monoblock Class D Car Power Amplifier + Absolute KIT4 Amp Kit The Punch P500X1bd is a mono amplifier capable of 500 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response allows it to be optimized for subwoofers. General Features: Punch BD Series Monoblock Class BD Car Amplifier RMS Power Rating: 4 ohms: 150 watts x 1 chan. 2 ohms: 300 watts x 1 chan. 1 ohm: 500 watts x 1 chan. CEA-2006 compliant amplifier MOSFET power supply Muted turn-on. Cast aluminum heatsink. 12dB/octave Butterworth crossover Stealth top-mounted control panel LED power, thermal, and protect indicators. Nickel-plated captive C-clamp terminals. Ultra-efficient Class BD circuitry to maximize amplifier power efficiency. On-board differential inputs eliminate noise picked up by the signal cable. Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator) High-level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately) MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span. Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances. Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low. DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowers the operating temperature and potential for noise-like circuit boards designed by aerospace manufacturers. Input sensitivity: 150mV - 12V On-board Punch EQ with +18dB boost @ 45Hz. Variable low-pass filter: 50-250 Hz Selectable infrasonic filter: off / 28 Hz Frequency response: 20 - 250 Hz Total Harmonic Distortion: <1.0% Dimensions: 11"L x 7-3/4"W x 2-3/8"H 8 AWG to 18 AWG speaker wire output terminals Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P500X1bd box: Mono subwoofer amplifier Four 1-1/2" Self-tapping screws 2.5mm Allen wrench Quick setup instructions Certificate of Performance P500X1bd owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Sold out -12% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate P600X4 600W Punch Series 4-Channel Stereo Class AB Car Power Amplifier $459.99 $519.00

Rockford Fosgate 600W Punch Series 4-Channel Stereo Class AB Car Power Amplifier The Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels. The Punch P600X4 multi-channel amplifier is versatile to power any audio system configuration. The stealth top-mounted control panel not only provides a sleek finished look to the amp but also protects the vital controls. Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand. General Features: Punch Series 4-Channel Class AB Car Amplifier RMS Power Rating: 4 ohms: 75 watts x 4 channel 2 ohms: 150 watts x 4 channel Bridged, 4 ohms: 300 watts x 2 channel MOSFET power supply Remote bass level input (remote level control sold separately) LED power, thermal, and protect indicators Tuned Bass EQ (0-18 dB bass boost at 45 Hz or 0-14 dB bass boost at 12 kHz depending on crossover selection) On-board differential inputs eliminate noise picked up by the signal cable 4/3/2 or Mono channel operation Integrated Trans ana technology simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality RCA Pass-thru outputs MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowers the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low Nickel-plated RCA level inputs Nickel-plated captive C-clamp terminals Variable high-pass filter (50-250 Hz, Butterworth, 12 dB/octave) Variable low-pass filter (50-250 Hz, Butterworth, 12 dB/octave) CEA-2006 compliant amplifier Frequency response: 20-20000 Hz Dimensions: 13-5/16"L x 7-3/4"W x 2-3/8"H What is in the box: 4-Channel amplifier Four 1-1/2" Self-tapping screws 2.5mm Allen wrench Quick setup instructions Certificate of Performance Rockford Fosgate Punch P600X4 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Sold out -31% sale

Rockford Fosgate PBR400X4D 400W Compact 4 Channel Punch Class D Amplifier 50 watts RMS x 4

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate PBR400X4D 400W Compact 4 Channel Punch Class D Amplifier 50 watts RMS x 4 $279.99 $399.99

Rockford Fosgate PBR400X4D 400W Compact 4 Channel Punch Series Class D Amplifier 50 watts RMS x 4 designed for stereo front/rear systems that require little space. The BRT (Boosted Rail Technology) is an ultra-efficient design that generates 400 watts of power! The BRT also has a variable hi-level DC offset turn-on circuit for easy installation into any OEM system. Great for motorcycles and recreational vehicles. The Punch PBR400X4D is a 400 Watt full-range amp designed for compact systems. This efficient 4-channel amp packs a Punch in UTVs, motorcycles, and hybrid-electric vehicles without sucking a lot of juice from your electrical system. General Features: Rockford Fosgate PBR400X4D Class D 4-Channel Amplifier RMS Power Rating: 4 ohms 50 watts x 4 channel RMS Power Rating: 2 ohms 100 watts x 4 channel RMS Power Rating: 1 ohm 1200 watts x 1 channel RMS Power Rating: Bridged 4 ohms 200 watts x 2 channel Total power output: 400 watts CEA-2006 Compliant Amplifier Differential inputs with high-level auto turn-on feature C.L.E.A.N. input/output clip detection and indicator LEDs Selectable Fixed 12dB/Octave Butterworth Crossovers Discrete surface mount technology 4-channel operation Extruded aluminum heatsinks Compact design for stealth installation Frequency Response: 20 Hz to 20000 Hz Total Harmonic Distortion (THD): < 1.0% (100 Hz) Fuse Rating: 40A x 3 Dimensions: "4.25"W x "1.53"H x "6.75"D Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the PBR400X4D package: 4-Channel amplifier Two 15" high-level input harnesses Two 8" speaker-level output harnesses Setup disc (CD) Amplifier Quick Setup Certificate of Performance Verification sheet Class-BR Amplifier Installation Advisory sheet ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -31% sale

Rockford Fosgate PBR400X4D Compact 400W 4 Channel Punch Series Class D Amplifier

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate PBR400X4D Compact 400W 4 Channel Punch Series Class D Amplifier $279.99 $399.99

Rockford Fosgate PBR400X4D 400W Compact 4 Channel Punch Series Class D Amplifier 50 watts RMS x 4 designed for stereo front/rear systems that require little space. The BRT (Boosted Rail Technology) is an ultra-efficient design that generates 400 watts of power! The BRT also has a variable hi-level DC offset turn-on circuit for easy installation into any OEM system. Great for motorcycles and recreational vehicles. The Punch PBR400X4D is a 400 Watt full-range amp designed for compact systems. This efficient 4-channel amp packs a Punch in UTVs, motorcycles, and hybrid-electric vehicles without sucking a lot of juice from your electrical system. General Features: Rockford Fosgate PBR400X4D Class D 4-Channel Amplifier RMS Power Rating: 4 ohms 50 watts x 4 channel RMS Power Rating: 2 ohms 100 watts x 4 channel RMS Power Rating: 1 ohm 1200 watts x 1 channel RMS Power Rating: Bridged 4 ohms 200 watts x 2 channel Total power output: 400 watts CEA-2006 Compliant Amplifier Differential inputs with high-level auto turn-on feature C.L.E.A.N. input/output clip detection and indicator LEDs Selectable Fixed 12dB/Octave Butterworth Crossovers Discrete surface mount technology 4-channel operation Extruded aluminum heatsinks Compact design for stealth installation Frequency Response: 20 Hz to 20000 Hz Total Harmonic Distortion (THD): < 1.0% (100 Hz) Fuse Rating: 40A x 3 Dimensions: "4.25"W x "1.53"H x "6.75"D Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the PBR400X4D package: 4-Channel amplifier Two 15" high-level input harnesses Two 8" speaker-level output harnesses Setup disc (CD) Amplifier Quick Setup Certificate of Performance Verification sheet Class-BR Amplifier Installation Advisory sheet ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -34% sale

00
DAYS 00
HRS 00
MIN 00
SEC

ROCKFORD FOSGATE PEQ / CONTROL EQ KNOB $39.99 $59.99

Rockford Fosgate PEQ Remote Wired Punch EQ for 2007+ Power & Punch Amps w/ Bass Knob This remote Punch EQ offers 0dB to +18dB boost @ 45Hz and/or a hinge treble boost 0dB to +12dB @ 12kHz. Cable and mounting hardware included. For use with select 2007 and newer PUNCH & POWER amplifiers. We are an Authorized Rockford Fosgate Dealer! General Features: Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Includes: remote knob, cable, mounting clip, and mounting screws Bass/Treble filtering based upon in-board amplifier crossover setting (HP-LP-AP) 8-pin connector Compatible Models: 2012-2014 Punch PBR300X2 Punch PBR500X1 2011-2014 Punch PBR300X1 Power T800-4ad Power T1000-4ad 2011-2012 Punch P1000X1D Punch P1000X5D 2010-2014 Power T500-1bdCP Power T1000-1bdCP Power T1500-1bdCP Power T2500-1bdCP 2010-2012 Punch P400-1 Punch P500-4 Punch P700-1bd 2009-2012 Punch P300-2 Punch P500-1bd 2009-2010½ Power T1000-4 2009 Power T1000-1bd Power T2500-1bd 2007-2014 Power T400-2 Power T400-4 Power T600-2 Power T600-4 2007-2012 Punch P200-2 Punch P300-1 Punch P400-2 Punch P400-4 Punch P500-2 Punch P1000-1bd 2007-2009 Power T500-1bd Power T1500-1bd ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Find anything you need

Products (12226)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER