Products – Page 900 – absoluteusa

ROCKFORD FOSGATE PS-8 8" COMPACT POWERED ENCLOSED SUBWOOFER SPEAKER AMPLIFIER $349.99 $649.99

Rockford Fosgate PS-8 300 Watt 8" Punch Amplified Powered Loaded Sub EnclosureIf you need to quickly add bass to a system but don't have much space or height to make it happen? Then the PS-8 is a perfect candidate! The PS-8 features a Punch 8” subwoofer in a custom sealed enclosure and is powered by a mighty 150 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.It will absolutely show down extremely excellent HD HQ sound and brilliant impressive performances.You can enjoy all of the vibrant, colorful, and distinctive musical tones you've ever wanted for your own desires. General Features: Punch Single 8" Amplified Loaded Shallow Enclosure Power Rating: Peak: 300 watts RMS: 150 watts Integrated Class-D Amplifier Remote bass level control included Includes all power, ground, and turn-on wires CEA-2006 Compliant Amplifier CEA-2031 Compliant & Klippel Verified Driver Cast aluminum with an ABS backplate enclosure Includes mounting hardware Supports Hi-level (Speaker) / low-level (RCA) inputs Remote/DC Offset/Signal Sense turn on select Short circuit, thermal, and reverse polarity protection Quick disconnect power and signal connections "Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure Variable 12 dB/Octave Butterworth low pass crossover: 50 - 120 Hz Built-in adjustable bass boost EQ: 0 - +12 dB @45 Hz Selectable phase: 0°/180° Frequency response: 25 - 150 Hz Input sensitivity: 125mV - 9V Fuse Rating: 30A x 1 Dimensions: 9.40"W x 14.4"D x 3.30"H Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the PS-8 Package: Enclosure loaded with one 8" woofer and built-in amplifier 17' 12-gauge power wire with in-line fuse holder 18" 12-gauge ground wire Removable power plug 15' Remote turn-on wire 12" Signal input harness Remote Level Control Metal mounting bracket 15' Remote cable Two 3/8" Screws Four 1" Screws Installation and Operation manual PS-8 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Sold out -26% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch 1000 Watt 5-Channel Car Amplifier - P1000X5 $629.99 $849.99

Rockford Fosgate Punch P1000X5 5-channel car amplifier — 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer. The P1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels, and run subwoofer(s) off the 5th channel! Known worldwide for brute power, this amplifier offers a higher level of efficiency along with tri-stage protection that covers thermal, over-current, and short circuits. General Features: 5-channel car amplifier 75 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms 125 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms 250 watts RMS x 2 bridged at 4 ohms + 500 watts RMS at 1 ohm CEA-2006 compliant variable high- and low-pass filters (50-250 Hz, 12 dB/octave) variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz) switchable subsonic filter (28 Hz, 12 dB/octave) on subwoofer channel L.E.A.N. gain setup system includes test tone CD test tones are also available as MP3 download from Amazon on Demand, Rhapsody, Google Play, and Spotify, labeled "3sixty.3 setup disc" (Punch amps and the 3sixty.3 use the same test tone tracks for setup) Class-BD amplifier design frequency response: 20-20K Hz Dynamic Thermal Management and MEHSA MOSFET cooling systems MOSFET power and output stages preamp and speaker-level inputs (speaker-level inputs require a speaker wire to RCA adapter) signal-sensing turn-on with speaker-level inputs eliminate the need for remote turn-on lead optional PLC2 wired remote level control with clip light available 4-gauge power and ground leads and a 150-amp fuse recommended — wiring and hardware not included with amplifier no onboard fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended. 15-1/8"W x 2-7/16"H x 8-13/16"D What is in the box: 5-Channel amplifier Four 1-1/2" Self-tapping screws 5mm Allen wrench Quick setup instructions Certificate of Performance Setup/Manual disc Rockford Fosgate Punch P1000X5 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Sold out -58% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch 6.5" 2-Way Full Range Speaker Kit For Harley Touring 2014-UP & American Terminal Speaker Adapter Install Kit Stereo Radio $109.98 $259.99

For Harley Touring Rockford Punch P1650 Speaker Package & American Terminal Speaker Adapter Install Kit Stereo Radio The Punch P1650 is a P1 full-range speaker system featuring a true 6.5" midrange optimized for a wide variety of U.S., European, and import vehicles, and a coaxial mounted tweeter. Fanatics that need a great sounding speaker to replace factory-installed versions will certainly benefit from this Punch series full range speaker. The P1650 & P1692 offers a Flex Fit2™ basket to ensure compatibility with U.S., European, and import vehicles. European installers will love this new "European Basket" to easily fit a variety of VW, Citroen, and Vauxhall models. The system also features an ICC (Integrated Concealed Crossover), eliminating the need to mount any black boxes. General Features: 6-1/2" P1 Punch Series 2-Way Car Speakers Power Handling: Peak: 220 watts per pair / 110 watts each RMS: 110 watts per pair / 55 watts each Recommended power range: 10 - 55 watts RMS per channel Injection-Molded Carbon Fiber-filled Polypropylene cone material 3/4" PEI Dome Tweeter Santoprene rubber surround CEA-2031 compliant speakers 1" high-temperature voice coil Integrated ICC crossover filter removes unwanted frequencies from the drivers DDC (Discreet Dual Clamp) provides concentric clamping pressure to maximize fitment FlexFit (Slot Mounted Frame Pattern) allows slight adjustment of speaker when mounted VAST (Vertical Attach Surround Technique) provides up to 25% more effective radiating cone area Rubber magnet boot cover Grilles and mounting hardware included 4 ohms impedance Frequency response: 45 - 20,000 Hz Top-mount depth: 2-1/4"" Sensitivity: 88dB Authorized Internet Dealer 1-year Manufacturer's Warranty American Terminal Harley Specific Speaker Adapters 6-1/2" To 6-3/4" Speaker Adapter For 1998-2013 Harley Davidson Touring Models General Features: 6-1/2" - 6-3/4" Speaker Adapter Plate For 1998-2013 Harley Davidson Touring Vehicles Designed and manufactured with Precision Tolerances Gapless Fit Between the Speaker and The Kit Painted to Match Factory Color Factory Matched Texture Style High-Grade Abs Plastic Construction Color: Black Authorized Internet Dealer 1-Year Manufacturer's Warranty Kit Includes: Speaker Adapter Plate Step by Step Instructions Compatibility List: 1998 - 2013 Electra Glide with Fairing 1998 - 2013 Road Glide with Fairing 2006 - 2013 Street Glide with Fairing CVO & SCREAMING EAGLE BIKES ARE NOT COMPATIBLE UNLESS MODIFICATIONS ARE PERFORMED / MESSAGE US ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Sold out -46% sale

Rockford Fosgate Punch P1-1X10 Single P1 10

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P1-1X10 Single P1 10" Loaded Subwoofer Enclosure Ported $219.99 $399.99

Rockford Fosgate Punch P1-1X10 Single P1 10" Loaded Subwoofer Enclosure Ported ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -42% sale

Rockford Fosgate Punch P1-2X10 Dual P1 10

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P1-2X10 Dual P1 10" Loaded Subwoofer Enclosure Ported $379.99 $650.00

Rockford Fosgate P1-2X10 Punch P1 Dual Subwoofer Loaded Enclosure The P1-2X10 is a dual P1 10” vented enclosure with 500 Watts RMS power handling wired to a 2-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high-density carpet, and features quick-release compression terminals. Enclosure Features: Dual 10" Loaded, Ported Box Solid 5/8" MDF Construction Front-firing tuned port Spring-loaded binding posts Complete with high-density black box carpeting Dimensions: 15-1/8"D x 31-1/8"W x 13-1/8"H Subwoofer Features: 10" Punch Stage 1 Subwoofers Power Handling: Peak: 1000 watts total (500 watts each) RMS: 500 watts total (250 watts each) Recommended power range: 250 - 500 watts RMS @ 2 ohms CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Stamped Mesh Grille Insert Available: Rockford Fosgate P1G-10 [Rockford Fosgate P1 Series] Magnet Weight: 45 oz Frequency Response: 23 - 250 Hz Xmax: 9mm Sensitivity: 84 dB @ 1 watt / 1 meter ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Sold out -41% sale

Rockford Fosgate Punch P1-2X12 & P500X1BD<BR/>1000W Peak Punch P1 Dual 12

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P1-2X12 & P500X1BD
1000W Peak Punch P1 Dual 12" Loaded Subwoofer Enclosure Ported $889.98 $1,499.99

Rockford Fosgate Punch P1-2X12 & P500X1BD<BR/>1000W Peak Punch P1 Dual 12" Loaded Subwoofer Enclosure Ported General Features: Two 12" Single 4-ohm Punch Stage 1 Subwoofers Total Power Handling: Peak: 1000 watts RMS: 500 watts Recommended power range: 250 - 600 watts RMS @ 2-ohm CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16-gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surrounds for larger surface area. Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design. Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate. High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar. The die-cast aluminum soft-touch painted trim ring allows for the optional integrated grill. Stamped Mesh Grille Insert Available: Rockford Fosgate P1G-12 Magnet Weight: 45 oz Frequency Response: 20 - 250 Hz Xmax: 9mm Enclosure Features: Dual 12" Loaded, Ported Box Solid 5/8" MDF Construction Front-firing tuned port. Spring-loaded binding posts Complete with high-density black box carpeting Dimensions: 15-1/8"D x 33-7/8"W x 15-3/4"H Punch BD Series Monoblock Class BD Car Amplifier RMS Power Rating: 4 ohms: 150 watts x 1 chan. 2 ohms: 300 watts x 1 chan. 1 ohm: 500 watts x 1 chan. CEA-2006 compliant amplifier MOSFET power supply Muted turn-on. Cast aluminum heatsink. 12dB/octave Butterworth crossover Stealth top-mounted control panel LED power, thermal, and protection indicators. Nickel-plated captive C-clamp terminals. Ultra-efficient Class BD circuitry to maximize amplifier power efficiency. On-board differential inputs eliminate noise picked up by the signal cable. Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator) High-level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately) MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span. Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances. Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low. DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances, improving the efficiency of the circuit and lowering the operating temperature and potential for noise-like circuit boards designed by aerospace manufacturers. Input sensitivity: 150mV - 12V On-board Punch EQ with +18dB boost @ 45Hz. Variable low-pass filter: 50-250 Hz Selectable infrasonic filter: off / 28 Hz Frequency response: 20 - 250 Hz Total Harmonic Distortion: <1.0% Dimensions: 11"L x 7-3/4"W x 2-3/8"H 8 AWG to 18 AWG speaker wire output terminals Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -42% sale

Rockford Fosgate Punch P1-2X12<BR/>1000W Peak Punch P1 Dual 12

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P1-2X12
1000W Peak Punch P1 Dual 12" Loaded Subwoofer Enclosure Ported $409.99 $699.99

Rockford Fosgate Punch P1-2X12 1000W Peak Dual 12" Loaded Subwoofer Enclosure Ported The most convenient way to get low-frequency bass in your system is to drop-in a Punch loaded enclosure. We're not talking junk in the trunk, we're talking the same genuine Punch woofers available separately. The P1-2X12 is dual 12” Punch P1 SVC subwoofers in a Rockford Fosgate built vented enclosure, with a power handling of 500 Watts RMS and wired to a 2-Ohm load. Rockford Fosgate’s Punch loaded enclosures are constructed with durable 5/8" MDF and tuned by our computer aided design software to ensure quality sound and high output. Punch P1 loaded enclosures feature similar tonal performance as our P2 & P3 models, but are easier to move in-n-out of vehicles due General Features: Two 12" Single 4-ohm Punch Stage 1 Subwoofers Total Power Handling: Peak: 1000 watts RMS: 500 watts Recommended power range: 250 - 600 watts RMS @ 2-ohm CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16-gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surrounds for larger surface area. Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design. Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate. High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar. The die-Cast aluminum soft-touch painted trim ring allows for the optional integrated grill. Stamped Mesh Grille Insert Available: Rockford Fosgate P1G-12 Magnet Weight: 45 oz Frequency Response: 20 - 250 Hz Xmax: 9mm Enclosure Features: Dual 12" Loaded, Ported Box Solid 5/8" MDF Construction Front-firing tuned port. Spring-loaded binding posts Complete with high-density black box carpeting Dimensions: 15-1/8"D x 33-7/8"W x 15-3/4"H ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -42% sale

Rockford Fosgate Punch P1000X1bd <br/> P1000X1bd Mono subwoofer amplifier 1,000 watts RMS x 1 at 1 ohm

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P1000X1bd
P1000X1bd Mono subwoofer amplifier 1,000 watts RMS x 1 at 1 ohm $499.99 $859.98

Rockford Fosgate Punch P1000X1bd Mono subwoofer amplifier 1,000 watts RMS x 1 at 1 ohm The Punch P1000X1bd mono amplifier pumps out 1,000 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response is optimized for subwoofers. With its super-efficient Class-BD circuit topology, the P1000X1bd assures maximum BOOM for your buck! Due to its dedicated low-frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will easily drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers. General Features: Punch BD Series Monoblock Class BD Car Amplifier RMS Power Rating: 4 ohms: 300 watts x 1 channel 2 ohms: 500 watts x 1 channel 1 ohm: 1000 watts x 1 channel CEA-2006 compliant amplifier Features C.L.E.A.N. Set-up with the 10-step set-up procedure w/ input/output clip detection and indicator LEDs MOSFET power supply Muted turn on Cast aluminum heatsink 12dB/octave Butterworth crossover Stealth top-mounted control panel LED power, thermal, and protection indicators Nickel-plated captive C-clamp terminals Ultra-efficient Class BD circuitry to maximize amplifier power efficiency On-board differential inputs eliminate noise picked up by the signal cable Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator) High-level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately) MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowering the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers Input sensitivity: 150mV - 12V On-board Punch EQ with +18dB boost @ 45Hz. Variable low-pass filter: 50-250 Hz Selectable infrasonic filter: off / 28 Hz Frequency response: 20 - 250 Hz Total Harmonic Distortion: <1.0% Dimensions: 13-5/16"L x 7-3/4"W x 2-3/8"H 8 AWG to 18 AWG speaker wire output terminals 4 gauge power and ground wiring is recommended for installation. Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P1000X1bd package: P1000X1bd owner's manual Mono subwoofer amplifier Four 1-1/2" Self-tapping screws 5mm Allen wrench Quick setup instructions ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-38% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P1000X1bd Mono subwoofer amplifier 1,000 watts RMS x 1 at 1 ohm $499.99 $799.99

Rockford Fosgate Punch P1000X1bd Mono subwoofer amplifier 1,000 watts RMS x 1 at 1 ohm The Punch P1000X1bd mono amplifier pumps out 1,000 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response is optimized for subwoofers. With its super-efficient Class-BD circuit topology, the P1000X1bd assures maximum BOOM for your buck! Due to its dedicated low-frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will easily drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers. General Features: Punch BD Series Monoblock Class BD Car Amplifier RMS Power Rating: 4 ohms: 300 watts x 1 channel 2 ohms: 500 watts x 1 channel 1 ohm: 1000 watts x 1 channel CEA-2006 compliant amplifier Features C.L.E.A.N. Set-up with the 10-step set-up procedure w/ input/output clip detection and indicator LEDs MOSFET power supply Muted turn on Cast aluminum heatsink 12dB/octave Butterworth crossover Stealth top-mounted control panel LED power, thermal, and protection indicators Nickel-plated captive C-clamp terminals Ultra-efficient Class BD circuitry to maximize amplifier power efficiency On-board differential inputs eliminate noise picked up by the signal cable Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator) High-level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately) MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowering the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers Input sensitivity: 150mV - 12V On-board Punch EQ with +18dB boost @ 45Hz. Variable low-pass filter: 50-250 Hz Selectable infrasonic filter: off / 28 Hz Frequency response: 20 - 250 Hz Total Harmonic Distortion: <1.0% Dimensions: 13-5/16"L x 7-3/4"W x 2-3/8"H 8 AWG to 18 AWG speaker wire output terminals 4 gauge power and ground wiring is recommended for installation. Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P1000X1bd package: P1000X1bd owner's manual Mono subwoofer amplifier Four 1-1/2" Self-tapping screws 5mm Allen wrench Quick setup instructions ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Sold out -36% sale

Rockford Fosgate Punch P1000X2 2-channel car amplifier 300 watts RMS x 2

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P1000X2 2-channel car amplifier 300 watts RMS x 2 $499.99 $769.99

Rockford Fosgate Punch P1000X2 2-channel car amplifier 300 watts RMS x 2 Big power for your speakers or subwoofersRockford Fosgate's Punch P1000X2 amplifier sends 300 watts RMS to each of a pair of high-performance speakers or subs, filling your ride with plenty of loud, clean music. You can use the high-pass filter to keep the low bass out of your speakers so they perform more efficiently. You can also switch this versatile amp into mono mode to drive a sub with up to 1000 watts RMS, then use the built-in low-pass filter to send the correct bass frequencies to your sub. The Punch EQ2 features a bass and treble boost, in case you want to add a little boom and sizzle back into the mix. Easy to set for optimum performanceOnce again, Rockford Fosgate steps away from the crowd with their C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) — a setup system that ensures your music will sound as clean and powerful as possible. It works like this: first download the setup tones from Rockford Fosgate, then play the tone, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It's that simple — your amplifier will be perfectly set to match your receiver's output. When your receiver reaches maximum clean volume, you'll get maximum clean power from your Power amp. At quiet listening levels, you'll hear less background noise and more of your music. Keeps an eye on things while playingIf that blue light turns solid red while you're playing music, the amp's telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music's clipping. The amp's built-in computer keeps tabs on the output current, ensuring that plunging speaker impedances (they change during play) or even a short circuit won't hurt anything. Maintaining coolness raises efficiency and lowers distortionRockford Fosgate's Dynamic Thermal Management system uses forced air to dissipate heat evenly across the amp and out through the high-mass heatsink, efficiently drawing heat away from vital internal parts. Their proprietary MEHSA cooling process maximizes the heat transfer from the MOSFET devices to the heatsink, allowing the heat to escape more readily, so the transistors stay cooler and work better. Product highlights: 2-channel car amplifier 300 watts RMS x 2 at 4 ohms (500 watts RMS x 2 at 2 ohms) 1000 watts RMS x 1 bridged at 4 ohms (4-ohm stable in bridged mode) CEA-2006 compliant Features: variable high- and low-pass filter filter (50-250 Hz, 12 dB/octave) variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz) C.L.E.A.N. gain setup system includes clip lights and link to Rockford Fosgate's setup tones Class-AB amplifier design frequency response: 20-20K Hz Dynamic Thermal Management and MEHSA MOSFET cooling systems MOSFET power and output stages preamp inputs and outputs speaker-level inputs (speaker wire to RCA adapter required) signal-sensing turn-on with speaker-level inputs eliminate need for remote turn-on lead More Info: optional PLC2 wired remote level control with clip light available 4-gauge power and ground leads and an 140-amp fuse recommended — wiring and hardware not included with amplifier no onboard fuses — when installing multiple amps in a system, an additional 140-amp in-line fuse between the distribution block and the amplifier is recommended 15-1/8"W x 2-7/16"H x 7-13/16"D warranty: 1 year ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-17% sale

Rockford Fosgate Punch P1000X5 5-channel car amplifier 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P1000X5 5-channel car amplifier 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm $629.99 $749.99

Rockford Fosgate Punch P1000X5 5-channel car amplifier 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm Big power for your whole systemRockford Fosgate's Punch P1000X5 amplifier can power your entire system, delivering 75 watts RMS to each of your front and rear speakers, along with up to 500 watts RMS to a subwoofer. The sub channel's low-pass and subsonic filters come in handy for getting the right sound from your sub/enclosure combo, and you can use the amp's high-pass filters to remove the bass from your full-range speakers so they'll play more efficiently. The Punch EQ2 includes bass and treble boosts, in case you want to liven up the mix. Not worried about rear speakers? You can also switch this amp into 3-channel mode to drive a couple of high-performance components with 250 watts RMS each while still powering a sub with up to 500 watts. Easy to set for optimum performanceOnce again, Rockford Fosgate steps away from the crowd with their C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) — a setup system that ensures your music will sound as clean and powerful as possible. It works like this: first download the setup tones from Rockford Fosgate, then play the tone, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It's that simple — your amplifier will be perfectly set to match your receiver's output. When your receiver reaches maximum clean volume, you'll get maximum clean power from your Power amp. At quiet listening levels, you'll hear less background noise and more of your music. Keeps an eye on things while playingIf that blue light turns solid red while you're playing music, the amp's telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music's clipping. The amp's built-in computer keeps tabs on the output current, ensuring that plunging speaker impedances (they change during play) or even a short circuit won't hurt anything. Eliminating heat raises efficiency and lowers distortionRockford Fosgate's Dynamic Thermal Management system uses forced air to dissipate heat evenly across the amp and out through the high-mass heatsink, efficiently drawing heat away from vital internal parts. Their proprietary MEHSA cooling process maximizes the heat transfer from the MOSFET devices to the heatsink, allowing the heat to escape more readily, so the transistors stay cooler and work better. Product highlights: 5-channel car amplifier 75 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms 125 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms 250 watts RMS x 2 bridged at 4 ohms + 500 watts RMS at 1 ohm CEA-2006 compliant Features: variable high- and low-pass filters (50-250 Hz, 12 dB/octave) variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz) switchable subsonic filter (28 Hz, 12 dB/octave) on subwoofer channel C.L.E.A.N. gain setup system includes clip lights and link to Rockford Fosgate's setup tones Class-BD amplifier design frequency response: 20-20K Hz Dynamic Thermal Management and MEHSA MOSFET cooling systems MOSFET power and output stages preamp and speaker-level inputs (speaker-level inputs require a speaker wire to RCA adapter) signal-sensing turn-on with speaker-level inputs eliminate need for remote turn-on lead More Info: optional PLC2 wired remote level control with clip light available 4-gauge power and ground leads and an 150-amp fuse recommended — wiring and hardware not included with amplifier no onboard fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended 15-1/8"W x 2-7/16"H x 8-13/16"D warranty: 1 year ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-26% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P1000X5 5-channel car amplifier 75 watts RMS x 4 at 4ohms $629.99 $849.99

Rockford Fosgate Punch P1000X5 5-channel car amplifier — 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer. The P1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels, and run subwoofer(s) off the 5th channel! Known worldwide for brute power, this amplifier offers a higher level of efficiency along with tri-stage protection that covers thermal, over-current, and short circuits. General Features: 5-channel car amplifier 75 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms 125 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms 250 watts RMS x 2 bridged at 4 ohms + 500 watts RMS at 1 ohm CEA-2006 compliant variable high- and low-pass filters (50-250 Hz, 12 dB/octave) variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz) switchable subsonic filter (28 Hz, 12 dB/octave) on subwoofer channel L.E.A.N. gain setup system includes test tone CD test tones are also available as MP3 download from Amazon on Demand, Rhapsody, Google Play, and Spotify, labeled "3sixty.3 setup disc" (Punch amps and the 3sixty.3 use the same test tone tracks for setup) Class-BD amplifier design frequency response: 20-20K Hz Dynamic Thermal Management and MEHSA MOSFET cooling systems MOSFET power and output stages preamp and speaker-level inputs (speaker-level inputs require a speaker wire to RCA adapter) signal-sensing turn-on with speaker-level inputs eliminate the need for remote turn-on lead optional PLC2 wired remote level control with clip light available 4-gauge power and ground leads and a 150-amp fuse recommended — wiring and hardware not included with amplifier no onboard fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended. 15-1/8"W x 2-7/16"H x 8-13/16"D What is in the box: 5-Channel amplifier Four 1-1/2" Self-tapping screws 5mm Allen wrench Quick setup instructions Certificate of Performance Setup/Manual disc Rockford Fosgate Punch P1000X5 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Find anything you need

Products (11995)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER