Products – Page 888 – absoluteusa

Rockford Fosgate - P500X1bd - Class D Amplifiers $389.99 $719.99

Rockford Fosgate Punch P500X1BD 500W RMS Punch Series Monoblock Class D Car Power Amplifier The Punch P500X1bd is a mono amplifier capable of 500 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response allows it to be optimized for subwoofers. General Features Punch BD Series Monoblock Class BD Car Amplifier RMS Power Rating: 4 ohms: 150 watts x 1 chan. 2 ohms: 300 watts x 1 chan. 1 ohm: 500 watts x 1 chan. CEA-2006 compliant amplifier MOSFET power supply Muted turn-on. Cast aluminum heatsink. 12dB/octave Butterworth crossover Stealth top-mounted control panel LED power, thermal, and protect indicators. Nickel-plated captive C-clamp terminals. Ultra-efficient Class BD circuitry to maximize amplifier power efficiency. On-board differential inputs eliminate noise picked up by the signal cable. Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator) High-level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately) MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span. Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances. Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low. DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowers the operating temperature and potential for noise-like circuit boards designed by aerospace manufacturers. Input sensitivity: 150mV - 12V On-board Punch EQ with +18dB boost @ 45Hz. Variable low-pass filter: 50-250 Hz Selectable infrasonic filter: off / 28 Hz Frequency response: 20 - 250 Hz Total Harmonic Distortion: <1.0% Dimensions: 11"L x 7-3/4"W x 2-3/8"H 8 AWG to 18 AWG speaker wire output terminals Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P500X1bd box: Mono subwoofer amplifier Four 1-1/2" Self-tapping screws 2.5mm Allen wrench Quick setup instructions Certificate of Performance P500X1bd owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -53% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate 1" 120 Watt Dome Car Audio Stereo Tweeter Systems (6 Pack) $479.94 $999.99

6 Pair Rockford Fosgate Punch P1T-S 240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit The Punch P1T-S is a 1” PEI dome tweeter kit designed for natural sound reproduction rated at 60 Watts RMS. The kit includes high-pass crossovers, mounting hardware, and three bezels for flush, surface, and angle configurations. Car audio fanatics will love the Punch series tweeter kit. It features a 1" (25mm) PEI dome, cool-looking outboard crossover, and 3 mounting bezels to accommodate various installations. General Features: 1" Punch Series Tweeter Kit Power Handling: Peak: 240 watts per pair / 120 watts each RMS: 120 watts per pair / 60 watts each Recommended power range: 10 - 60 watts RMS per channel Butyl rubber surround PEI dome tweeter Recessed tweeter mount uses standard 1-3/4" hole saw DDC (Discreet Dual Clamp) Tweeter Mounting provides concentric clamping pressure around the perimeter of the mounting hole. This results in maximum ease of installation. Grilles and mounting hardware included High Pass: 3,500 Hz 12dB/octave Butterworth Sensitivity: 90dB Frequency Response: 3,500-22,000 Hz Mounting Depth: 1/2" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Rockford Fosgate Punch P1T-S owner's manual Two 1" tweeters (with attached 6" speaker wire terminated with female quick-slide connectors) 2 Crossovers 2 Front flush mount brackets 2 Rear flush mount brackets 2 Surface mounting housings 2 Trim rings Two M4x25mm Machine screws Two M4x10mm Machine screws Two M4x16mm Stud bolts Two 40" Lengths of speaker wire (each with male quick slides on one end and female quick slides on the other) Two 40" Lengths of speaker wire (each with female quick slides on one end and bare wire on the other) Four 7" Zip ties Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -44% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate 1.5" Horn 100 Watt Heavy Duty Car Power Bullet Tweeter PP4-T $89.99 $159.99

Rockford Fosgate Punch Pro PP4-T 1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil The Pro PP4-T is a 1.5” 4-Ohm tweeter engineered specifically for high SPL (Sound Pressure Level) conditions. It features 50 watt RMS power handing and includes mounting hardware. The PP4-T Punch Pro is a 1.5" tweeter with integral 6dB high Pass crossover engineered for high SPL (Sound Pressure Level) conditions. The oversized motor structure and high power diaphragm, combined with a billet machined aluminum phase plug create the foundation for a highly sensitive speaker that can handle plenty of power. You'll be proud because these things are loud! The package includes mounting hardware. General Features: Aluminum diaphragm Billet stock machined aluminum phase plug High Temp Kapton Former Voice Coil Die-Cast Aluminum Housing All Metal Input Spring Terminal Connection 1-1/2" Punch Series Car Tweeter Power Handling: Peak: 100 watts RMS: 50 watts Recommended power range: 15 - 50 watts RMS 4 ohms impedance, also available in 8 ohms Machined Aluminum bullet tweeter construction High-temperature voice coil Integrated 6dB high-pass crossover filter Flush mountable basket design CEA-2031 compliant tweeter Designed for high SPL systems Sensitivity: 105dB Frequency response: 4,000-20,000 Hz Top-mount depth: 2-5/8" Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the box: Rockford Fosgate PP4-T owner's manual One tweeter Four 1" Self-tapping Allen head screws 3mm Allen head bit ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -50% sale

Rockford Fosgate 4 Channel High to Low RCA Level Output Radio Converter

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate 4 Channel High to Low RCA Level Output Radio Converter $50.99 $99.99

Rockford Fosgate RF-HLC4 4 Channel High to Low RCA Level Output Radio Converter The RF-HLC4 is a 4-channel high-level to low-level signal converter designed for factory or aftermarket radios that do not have dedicated low-level RCA outputs. The adapter converts the high-level signal from the radio's speaker line and transforms it into a safer low-level audio signal. This allows you to add a 4-channel amplifier to your system for higher power output and better sound quality. General Features: RCA Level Output Speaker Level Input 4-channel line output converter input: up to 10.5-volt (about 27 watts) output: up to 3 volts includes ground leads to reduce noise if necessary dimensions: 4-15/16"W x 1-1/16"H x 3-1/16"D warranty: 1 year What's in the box: Rockford Fosgate RF-HLC4 owner's manual 4-Channel high-level to low-level signal converter 12" Speaker-level harness Instructions on packaging ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -50% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate 4 Channel High to Low RCA Level Output Radio Converter $50.99 $99.99

Rockford Fosgate RF-HLC4 4 Channel High to Low RCA Level Output Radio Converter The RF-HLC4 is a 4-channel high-level to low-level signal converter designed for factory or aftermarket radios that do not have dedicated low-level RCA outputs. The adapter converts the high-level signal from the radio's speaker line and transforms it into a safer low-level audio signal. This allows you to add a 4-channel amplifier to your system for higher power output and better sound quality. General Features: RCA Level Output Speaker Level Input 4-channel line output converter input: up to 10.5-volt (about 27 watts) output: up to 3 volts includes ground leads to reduce noise if necessary dimensions: 4-15/16"W x 1-1/16"H x 3-1/16"D warranty: 1 year What's in the box: Rockford Fosgate RF-HLC4 owner's manual 4-Channel high-level to low-level signal converter 12" Speaker-level harness Instructions on packaging ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -50% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate 4 Channel High to Low RCA Level Output Radio Converter $50.99 $99.99

Rockford Fosgate RF-HLC4 4 Channel High to Low RCA Level Output Radio Converter The RF-HLC4 is a 4-channel high-level to low-level signal converter designed for factory or aftermarket radios that do not have dedicated low-level RCA outputs. The adapter converts the high-level signal from the radio's speaker line and transforms it into a safer low-level audio signal. This allows you to add a 4-channel amplifier to your system for higher power output and better sound quality. General Features: RCA Level Output Speaker Level Input 4-channel line output converter input: up to 10.5-volt (about 27 watts) output: up to 3 volts includes ground leads to reduce noise if necessary dimensions: 4-15/16"W x 1-1/16"H x 3-1/16"D warranty: 1 year What's in the box: Rockford Fosgate RF-HLC4 owner's manual 4-Channel high-level to low-level signal converter 12" Speaker-level harness Instructions on packaging ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Sold out -50% sale

Rockford Fosgate 4 Channel High to Low RCA Level Output Radio Converter RF-HLC4

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate 4 Channel High to Low RCA Level Output Radio Converter RF-HLC4 $50.99 $99.99

Rockford Fosgate RF-HLC4 4 Channel High to Low RCA Level Output Radio Converter The RF-HLC4 is a 4-channel high-level to low-level signal converter designed for factory or aftermarket radios that do not have dedicated low-level RCA outputs. The adapter converts the high-level signal from the radio's speaker line and transforms it into a safer low-level audio signal. This allows you to add a 4-channel amplifier to your system for higher power output and better sound quality. General Features: RCA Level Output Speaker Level Input 4-channel line output converter input: up to 10.5-volt (about 27 watts) output: up to 3 volts includes ground leads to reduce noise if necessary dimensions: 4-15/16"W x 1-1/16"H x 3-1/16"D warranty: 1 year What's in the box: Rockford Fosgate RF-HLC4 owner's manual 4-Channel high-level to low-level signal converter 12" Speaker-level harness Instructions on packaging ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -21% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate 4 x PLC2 Punch Remote Level Control w/ input Clip Indicator LED for 2013+ Amps (4 Pack) $159.96 $199.99

4 x Rockford Fosgate PLC2 Punch Remote Level Control w/Input Clip Indicator LED Show One Size Wired remote Punch Level Control for select 2013 and newer Punch and Power amplifiers. Remote Level Control offers remote level control of the amplifier. Once the onboard gain control is set, the PLC2 can attenuate (and not increase) the level from that point. Cable and mounting hardware included. For use with select 2013 and newer PUNCH and POWER amplifiers General Features: Rockford Fosgate PLC2 Punch Remote Level Control (Pair) wired remote level control and clip light Enhances onboard gain control Compatible with 2013 and newer Punch amplifiers Dual function LED (power/clipping) 20 Feet Wiring 0 20 dB Includes remote knob, cable, mounting clip, mounting screws For use with compact 2013 and newer PUNCH amplifiers. Product Condition: Brand New works with the following 2013-up Rockford Fosgate Punch amplifiers: P300X1, P400X1, P500X1bd, and P1000X1bd mono amps P300X2, P400X2, P500X2, and P1000X2 2-channel amps P600X4 4-channel amp P1000X5 5-channel amp 18' remote cable and mounting hardware included dimensions: 1-7/16"W x 1-1/4"H x 1-5/8"D (2-5/8"D with knob and cable) What is in the PLC2 box: Rockford Fosgate Punch Level Control remote module 18' remote cable with RJ-45 connectors on each end Mounting bracket Two 1/2" Mounting screws LED with attached 8" harness (used when mounting knob without its housing) Additional front panel Flat washer Nut PLC2 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -43% sale

Rockford Fosgate 4 X R2SD2-10 Prime 2-Ohm DVC Shallow 10” Subwoofer 200 Watts RMS

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate 4 X R2SD2-10 Prime 2-Ohm DVC Shallow 10” Subwoofer 200 Watts RMS $519.96 $899.99

4 x Rockford Fosgate Prime R2SD2-10 prime stage 400W Max (200W RMS) 10" shallow mount dual 2-ohm voice coils subwoofer When you have no space for bass, our Prime R2SD2-10 shallow subwoofer will satisfy your needs. This 10” subwoofer handles 200 Watts RMS, and the 2-ohm Dual Voice Coil design lets you wire them in various configurations. These drivers can fit in tight spaces due to an elevated motor structure that reduces speaker depth. Mica-injected polypropylene cones make sure bass notes are clean and accurate. Stamp-cast baskets feature spider venting typically reserved for traditional depth-mounted models to keep the motor cool! These shallow subwoofers are optimized for sealed enclosures. General Features: 10" Dual 2-ohm Shallow Mount Prime Stage 2 Series Subwoofer Peak Power Handling: 400 watts MS Power Handling: 200 watts Recommended power range: 100 - 200 watts RMS Impedance: 2 ohm Mica-injected polypropylene cone Black raised surround Linear spider with 16 AWG woven tinsel leads StampCast basket with integrated spider venting CEA-2031 Compliant accurate power handling rating Designed for use with sealed and vented enclosures High-temperature voice coil Integrated PVC trim ring Anodized aluminum voice coil former 10" shallow-mount subwoofer with dual 2-ohm voice coils mica-injected polypropylene woofer cone with poly-foam surround stamped solid-steel frame sealed box volume: 0.7 cubic feet ported box volume: 1.4 cubic feet Frequency response: 45-250 Hz Sensitivity: 82 dB Mounting depth: 3-7/16" Cutout diameter: 9-1/8" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: One shallow-mount 10" Dual 2-ohm voice coil woofer Eight 1-1/8" Self-tapping screws 4mm Allen bit Installation and Operation Manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -46% sale

Rockford Fosgate 500W Punch Single P1 10 Inch Loaded Subwoofer Enclosure(2 Pack)

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate 500W Punch Single P1 10 Inch Loaded Subwoofer Enclosure(2 Pack) $439.98 $800.00

Rockford Fosgate 500W Punch Single P1 10 Inch Loaded Subwoofer Enclosure(2 Pack) General Features: High flow, low noise port Connects to speakers up to 10 AWG compression terminals Conforms to CEA-2031 standards Klippel verified Dimensions: 13.125 x 17 x 15.125 inches Details: Rockford Fosgate created the Punch series subwoofers and enclosures for an easy-to-install bass system to upgrade your factory subs. The Punch Single P1 10-Inch Loaded Enclosure includes a 500-watt sub in a 5/8-inch MDF constructed enclosure with high-density carpet. The vented enclosure is tuned by computer-aided design software for similar tonal performance to the P2 and P3 but is easier to move in and out of vehicles. This sub features 250 watts RMS of power handling and a 4-ohm load. The enclosure features high flow low, noise port, and quick-release compression terminals. ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-54% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate 6.5 Inch 3 Way Car Audio Coaxial Speakers Stereo, 6 Speakers $209.97 $449.98

3 Pair Rockford Fosgate Prime R165X3 Car Speaker 180W Peak, 90W RMS 6.5" 3-Way PRIME Series Coaxial Speakers w/ Silk Tweeters The R165X3 is a 6.50” 3-way full-range speaker rated at 90 watts RMS for a new generation of factory replacement speakers. Kit includes two speakers with grilles, integrated high-pass crossovers, and mounting hardware. General Features: Vacuum Polypropylene cone Rubber surround Stamped steel basket Silk dome pole mounted Piezo tweeter and midrange Integrated tweeter crossover Grilles and mounting hardware included CEA-2031 Compliant Configuration: 3-Way Full-Range Midrange Diameter (in): 6.5" Midrange Depth (in): 2.15" (54.5mm) Tweeter Diameter (in): .50" (12mm) Frequency Response: 52Hz - 20kHz Nominal Impedance: 4-Ohm Power Handling (RMS): 45 Watts RMS 90 Watts MAX Crossover: Tweeter High-Pass (HP): 6dB Sensitivity (dB @ 1 watt/1 meter): 91 dB Grilles Included: Yes Mounting Hardware: Yes Priced Per 2 Pair Authorized Dealer 1 Year Warranty What's in the R165X3 package: Two 3-Way speakers 2 Grilles Two 15' Lengths of speaker wire Eight 1-1/4" Self-tapping screws 8 Speed clips Installation/Operation manual R165X3 owner's manual Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

-54% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate 6.5 Inch 3 Way Car Audio Coaxial Speakers Stereo, 6 Speakers $209.97 $449.98

Rockford Fosgate Prime R165X3 Car Speaker 180W Peak, 90W RMS 6.5" 3-Way PRIME Series Coaxial Speakers w/ Silk Tweeters The R165X3 is a 6.50” 3-way full-range speaker rated at 90 watts RMS for a new generation of factory replacement speakers. Kit includes two speakers with grilles, integrated high-pass crossovers, and mounting hardware. General Features: Vacuum Polypropylene cone Rubber surround Stamped steel basket Silk dome pole mounted Piezo tweeter and midrange Integrated tweeter crossover Grilles and mounting hardware included CEA-2031 Compliant Configuration: 3-Way Full-Range Midrange Diameter (in): 6.5" Midrange Depth (in): 2.15" (54.5mm) Tweeter Diameter (in): .50" (12mm) Frequency Response: 52Hz - 20kHz Nominal Impedance: 4-Ohm Power Handling (RMS): 45 Watts RMS 90 Watts MAX Crossover: Tweeter High-Pass (HP): 6dB Sensitivity (dB @ 1 watt/1 meter): 91 dB Grilles Included: Yes Mounting Hardware: Yes Priced Per Pair Authorized Dealer 1 Year Warranty What's in the R165X3 package: Two 3-Way speakers 2 Grilles Two 15' Lengths of speaker wire Eight 1-1/4" Self-tapping screws 8 Speed clips Installation/Operation manual R165X3 owner's manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.gov.

Find anything you need

Products (11998)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER