Products – Page 856 – absoluteusa

Peavey IPR2 5000 2-Channel Lightweight 5000W Power Amplifier + 2 PV25 Speaker Cable $1,029.99 $1,447.99

Peavey IPR 2 5000 2-Channel Lightweight 5000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable Peavey IPR2 5000 2-channel Power Amplifier, 5000W Max, 1510W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 13.6 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 3230 watts 20ms repetitive burst / 2530 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 1985 watts 20ms repetitive burst / 1700 watts 1% THD / 1470 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1175 watts 20ms repetitive burst / 1025 watts 1% THD / 880 watts 0.15% THD, both channels driven @ 1kHz Two-channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs Four pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 17.42 lb (7.9 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-27% sale

Peavey IPR2 5000 2-Channel Lightweight 5000W Power Amplifier +MSP1 Mic System + 2 PV 25' Cables

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey IPR2 5000 2-Channel Lightweight 5000W Power Amplifier +MSP1 Mic System + 2 PV 25' Cables $1,069.99 $1,447.99

Peavey IPR 2 5000 2-Channel Lightweight 5000W Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MSP1 Mic System Peavey IPR2 5000 2-channel Power Amplifier, 5000W Max, 1510W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 13.6 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 3230 watts 20ms repetitive burst / 2530 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 1985 watts 20ms repetitive burst / 1700 watts 1% THD / 1470 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1175 watts 20ms repetitive burst / 1025 watts 1% THD / 880 watts 0.15% THD, both channels driven @ 1kHz Two-channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs Four pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 17.42 lb (7.9 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-27% sale

Peavey IPR2 5000 2-Channel Lightweight 5000W Power Amplifier +PVI100XLR Mic+2 Speaker Cables

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey IPR2 5000 2-Channel Lightweight 5000W Power Amplifier +PVI100XLR Mic+2 Speaker Cables $1,059.99 $1,447.99

Peavey IPR 2 5000 2-Channel Lightweight 5000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + PVI100XLR Wired Dynamic Cardioid Vocal Microphone Peavey IPR2 5000 2-channel Power Amplifier, 5000W Max, 1510W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 13.6 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 3230 watts 20ms repetitive burst / 2530 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 1985 watts 20ms repetitive burst / 1700 watts 1% THD / 1470 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1175 watts 20ms repetitive burst / 1025 watts 1% THD / 880 watts 0.15% THD, both channels driven @ 1kHz Two-channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs Four pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 17.42 lb (7.9 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-25% sale

Peavey IPR2 5000 2-channel Power Amplifier Bundle

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey IPR2 5000 2-channel Power Amplifier Bundle $1,089.99 $1,447.99

Peavey IPR2 5000 2-channel Power Amplifier, 5000W, with built-in Crossovers, Speaker Protection, and a lightweight 13.6-lb chassis. + MR DJ USA Bundle 2 Speaker stands, 2 12' Speakon to Speakon cables, and a Carry Bag & Mobile Bracket Holder and Electrical Tape Peavey IPR2 5000 2-channel Power Amplifier, 5000W Max, 1510W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 13.6 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 3230 watts 20ms repetitive burst / 2530 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 1985 watts 20ms repetitive burst / 1700 watts 1% THD / 1470 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1175 watts 20ms repetitive burst / 1025 watts 1% THD / 880 watts 0.15% THD, both channels driven @ 1kHz Two-channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs Four pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 17.42 lb (7.9 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-34% sale

Peavey IPR2 7500 2-channel 7500W Lightweight Power Amplifier

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey IPR2 7500 2-channel 7500W Lightweight Power Amplifier $1,199.99 $1,800.00

Peavey IPR27500 2-channel Power Amplifier, 7500W Max, 2022W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 14.5 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 4750 watts 20ms repetitive burst / 3750 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 2800 watts 20ms repetitive burst / 2450 watts 1% THD / 2020 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1550 watts 20ms repetitive burst / 1425 watts 1% THD / 1200 watts 0.15% THD, both channels driven @ 1kHz 2 channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs 4 pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 18.39 lb (8.34 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-32% sale

Peavey IPR2 7500 2-channel 7500W Lightweight Power Amplifier + 2 PV25 Speaker Cable

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey IPR2 7500 2-channel 7500W Lightweight Power Amplifier + 2 PV25 Speaker Cable $1,229.99 $1,800.00

Peavey IPR 27500 2-Channel Lightweight 7500 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable Peavey IPR2 7500 2-channel Power Amplifier, 7500W Max, 2022W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 14.5 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 4750 watts 20ms repetitive burst / 3750 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 2800 watts 20ms repetitive burst / 2450 watts 1% THD / 2020 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1550 watts 20ms repetitive burst / 1425 watts 1% THD / 1200 watts 0.15% THD, both channels driven @ 1kHz 2 channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs 4 pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 18.39 lb (8.34 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-29% sale

Peavey IPR2 7500 2-channel 7500W Lightweight Power Amplifier + 2 Speaker Stand Bundle

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey IPR2 7500 2-channel 7500W Lightweight Power Amplifier + 2 Speaker Stand Bundle $1,279.99 $1,800.00

Peavey IPR 27500 2-Channel Lightweight 7500 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MR DJ USA Bundle 2 Speaker stands, 2 12' Speakon to Speakon cables, and a Carry Bag. Peavey IPR2 7500 2-channel Power Amplifier, 7500W Max, 2022W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 14.5 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 4750 watts 20ms repetitive burst / 3750 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 2800 watts 20ms repetitive burst / 2450 watts 1% THD / 2020 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1550 watts 20ms repetitive burst / 1425 watts 1% THD / 1200 watts 0.15% THD, both channels driven @ 1kHz 2 channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs 4 pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 18.39 lb (8.34 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-30% sale

Peavey IPR2 7500 2-channel 7500W Lightweight Power Amplifier +MSP1 Mic System + 2 PV 25' Cables

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey IPR2 7500 2-channel 7500W Lightweight Power Amplifier +MSP1 Mic System + 2 PV 25' Cables $1,269.99 $1,800.00

Peavey IPR 27500 2-Channel Lightweight 7500 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MSP1 Mic System Peavey IPR2 7500 2-channel Power Amplifier, 7500W Max, 2022W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 14.5 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 4750 watts 20ms repetitive burst / 3750 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 2800 watts 20ms repetitive burst / 2450 watts 1% THD / 2020 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1550 watts 20ms repetitive burst / 1425 watts 1% THD / 1200 watts 0.15% THD, both channels driven @ 1kHz 2 channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs 4 pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 18.39 lb (8.34 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-31% sale

Peavey IPR2 7500 2-channel 7500W Lightweight Power Amplifier +PVI100XLR Mic+2 Speaker Cables

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey IPR2 7500 2-channel 7500W Lightweight Power Amplifier +PVI100XLR Mic+2 Speaker Cables $1,259.99 $1,800.00

Peavey IPR 27500 2-Channel Lightweight 7500 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + PVI100XLR Wired Dynamic Cardioid Vocal Microphone Peavey IPR2 7500 2-channel Power Amplifier, 7500W Max, 2022W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 14.5 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 4750 watts 20ms repetitive burst / 3750 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 2800 watts 20ms repetitive burst / 2450 watts 1% THD / 2020 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1550 watts 20ms repetitive burst / 1425 watts 1% THD / 1200 watts 0.15% THD, both channels driven @ 1kHz 2 channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs 4 pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 18.39 lb (8.34 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-29% sale

Peavey IPR2 7500 2-channel 7500W Lightweight Power Amplifier Bundle

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey IPR2 7500 2-channel 7500W Lightweight Power Amplifier Bundle $1,289.99 $1,800.00

Peavey IPR 27500 2-Channel Lightweight 7500 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MR DJ USA Bundle 2 Speaker stands, 2 12' Speakon to Speakon cables, and a Carry Bag & Mobile Bracket Holder and Electrical Tape Peavey IPR2 7500 2-channel Power Amplifier, 7500W Max, 2022W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 14.5 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 4750 watts 20ms repetitive burst / 3750 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 2800 watts 20ms repetitive burst / 2450 watts 1% THD / 2020 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1550 watts 20ms repetitive burst / 1425 watts 1% THD / 1200 watts 0.15% THD, both channels driven @ 1kHz 2 channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs 4 pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 18.39 lb (8.34 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -31% sale

Peavey KB 1, 20-Watt 1x8 Keyboard Amplifier

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey KB 1, 20-Watt 1x8 Keyboard Amplifier $199.99 $289.59

The Peavey KB 1 is a 20-Watt 1x8 Keyboard Amplifier. Basically self-contained, compact sound systems, the KB series amps are perfect for voice, keyboards, acoustic and electric guitar, drum machines and backing machines. Product Specifications: Product Weight: 16.00 lbs Box Dimensions (L x W x H): 13.12 x 18 x 19.5 inches Box Weight: 21.00 lbs

-42% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey KB 2 40-Watt 1x10 Keyboard Amp $349.99 $599.99

Peavey KB2 3-Channel Keyboard Amplifier (40 Watts, 1x10")Self-contained, compact sound systems, the KB series amps are perfect for voice, keyboards, acoustic and electric guitars, drum machines, and backing machines. General Features: Four separate channels Channels 1 & 2 have 1/4" inputs Channel 3 features XLR and 1/4" inputs Channel 4 features a 1/4" monitor input with level control Channels 1 & 2 have 2-band EQ Channel 3 has three three-band EQ Headphone out 10-inch coax speaker FX send/return Balanced XLR main out Bi-amped 45 watts and 12 watts Weight Unpacked: 34.00 lb(15.422 kg) Weight Packed: 40.00 lb(18.144 kg) Width Packed: 21.12"(53.6448 cm) Height Packed: 22.12"(56.1848 cm) Depth Packed: 16.62"(42.2148 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Find anything you need

Products (12422)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER