Products – Page 457 – absoluteusa

Audio Control LC2i 2 Channel Line Out Converter with AccuBASS Subwoofer Control $109.00 $199.98

Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system The LC2i is a compact, two-channel processor with active input circuitry. It can accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality preamp signals that can be directed to after-market processors and amplifiers. As a result, users can enjoy maximum sound quality while maintaining factory volume and steering wheel controls. General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete-level controls GTO - Signal sensing inputs The 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt preamp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) The LC2i Specifications Maximum speaker level input: 400 watts per channel Maximum Preamp Output: 9.5Vrms / 13V peak Optional Dash Level Control Remote: +0dB / -19dB Frequency response: 10 Hz - 100,000 Hz; ±1dB Total harmonic distortion: 0.01% Signal to Noise ratio: >110dB Input Impedance: 20K ohms Output Impedance: 150 ohms Power draw: 150 mA Recommended fuse rating: 1 Amp Weight: 1 pound. What is in the package: LC2i owner's manual Two-Channel line-output converter Quality Control Certificate Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -31% sale

Audio Control LC2i Pro 2 Channel Line Out Converter with ACCUBASS w/ Dash Remote

00
DAYS 00
HRS 00
MIN 00
SEC

Audio Control LC2i Pro 2 Channel Line Out Converter with ACCUBASS w/ Dash Remote $139.00 $199.99

Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system & ACR-1 Dash Remote The LC2i is a compact, two-channel processor with active input circuitry. It can accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality preamp signals that can be directed to after-market processors and amplifiers. As a result, users can enjoy maximum sound quality while maintaining factory volume and steering wheel controls. General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel. AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete-level controls GTO - Signal sensing inputs The 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt preamp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) The LC2i Specifications Maximum speaker level input: 400 watts per channel Maximum Preamp Output: 9.5Vrms / 13V peak Optional Dash Level Control Remote: +0dB / -19dB Frequency response: 10 Hz - 100,000 Hz; ±1dB Total harmonic distortion: 0.01% Signal to Noise ratio: >110dB Input Impedance: 20K ohms Output Impedance: 150 ohms Power draw: 150 mA Recommended fuse rating: 1 Amp Weight: 1 pound What is in the package: LC2i owner's manual Two-Channel line-output converter Quality Control Certificate AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the ACR-1package: ACR-1 owner's manual Remote dash mount control 20' RJ-14 cable Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -47% sale

Audio Control LC2i PRO 2-Channel Line Output Converter

00
DAYS 00
HRS 00
MIN 00
SEC

Audio Control LC2i PRO 2-Channel Line Output Converter $139.00 $259.98

Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system & ACR-1 Dash Remote The LC2i is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality preamp signals that can then be directed to after-market processors and amplifiers. As a result, users can enjoy maximum sound quality while maintaining factory volume and steering wheel controls. General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete-level controls GTO - Signal sensing inputs The 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt preamp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) The LC2i Specifications Maximum speaker level input: 400 watts per channel Maximum Preamp Output: 9.5Vrms / 13V peak Optional Dash Level Control Remote: +0dB / -19dB Frequency response: 10 Hz - 100,000 Hz; ±1dB Total harmonic distortion: 0.01% Signal to Noise ratio: >110dB Input Impedance: 20K ohms Output Impedance: 150 ohms Power draw: 150 mA Recommended fuse rating: 1 Amp Weight: 1 pound What is in the package: LC2i owner's manual Two-Channel line-output converter Quality Control Certificate AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the ACR-1package: ACR-1 owner's manual Remote dash mount control 20' RJ-14 cable Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-41% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Audio Control LC6i & ACR-1 6 Channel Line Out Converter with Internal Summing for add aftermarket amps to a factory system & ACR-1 Dash Remote $149.00 $249.98

Audio Control LC6i 6 Channel Line Out Converter with Internal Summing for adding aftermarket amps to a factory system & ACR-1 Dash Remote AudioControl continues to simplify OEM integration with the new LC6i Six Channel Line Output Converter with internal summing. The LC6i is built on the same technology as its predecessor, the LC6. It converts speaker-level inputs from a factory radio or factory amplifier into high-quality pre-amp signals. The addition of internal summing capabilities and improved GTO™ signal-sense turn-on make the LC6i the perfect solution to your OEM headaches. The LC6i allows for the addition of aftermarket processors and amplifiers while maintaining the use of the factory volume and steering wheel controls. Internal signal summing and AudioControl’s new GTO™ signal-sense turn-on make the LC6i a perfect OEM interface for a performance audio system. The LC6i follows in the steps of the rampantly successful LC8 Eight Channel Line Output Converter, offering all the same features for 6-channel systems at a reduced price. The LC6i accepts speaker-level signals, both crossed-over and full range, and converts them to high-quality pre-amp signals. Signals from factory radios with built-in crossovers can be overcome by summing them together internally to provide a full-range preamp signal. The LC6i provides the type of clean pre-amp signals installers are familiar with. Those who desire custom control over the sound can easily add one of AudioControl’s many crossovers or equalizers, which offer unlimited system design flexibility that is clearly different from traditional OEM interfaces. Add remote-level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. It comes with a 20-foot cable and removable mounting enclosure (for custom dash installations). General Features: Six Input and Output Channels 6 Speaker Level Inputs - Can Accept 400-Watt Signals! Signal sensing inputs Internal Channel Summing AutoMode inputs Level matching controls 12-volt trigger output Line Output Converter: A device for converting a powered (or amplified) signal into a pre-amp line level (or non-powered) signal Input for optional subwoofer level control: AudioControl ACR-1 Color: Black Weight: 3.5 lbs Size: 8.00" W x 6.00" D x 1.20" H Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) LC6i Specifications: Maximum speaker-level input: 400 watts @ 4 ohms Maximum output level: 9.5Vrms Output gain: +/-12 dB Frequency response: 10Hz-22kHz Total harmonic distortion: 0.01% Input Impedance: 20K Ohms Power supply: High headroom PWM switching Power draw: 200mA Recommended fuse rating: 1 Amp Remote Trigger Output Current: 1 Amp What is in the LC6i box: 6-Channel line-output converter Instructions/Specs/Warranty (on packaging) Quality Control Certificate AudioControl LC6i owner's manual AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors Add remote-level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. It comes with a 20-foot cable and removable mounting enclosure (for custom dash installations). General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) compatible with 6XS ACM-1.300 The Epicenter® Concert Series LC2i LC6i LC7i Overdrive Plus Matrix Plus LC-4.800 LC-6.1200 legacy products supported LC6 LC8 Original Epicenter® (bypass not supported) What is in the ACR-1 box: Remote dash mount control 20' RJ-14 cable. Mounting Instructions on packaging AudioControl ACR-1 owner's manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-26% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Audio Control LC6i 6 Channel Line Out Converter with Internal Summing for add aftermarket amps to a factory system $185.00 $249.99

Audio Control LC6i 6 Channel Line Out Converter with Internal Summing for adding aftermarket amps to a factory system AudioControl continues to simplify OEM integration with the new LC6i Six Channel Line Output Converter with internal summing. The LC6i is built on the same technology as its predecessor, the LC6. It converts speaker-level inputs from a factory radio or factory amplifier into high-quality pre-amp signals. The addition of internal summing capabilities and improved GTO™ signal-sense turn-on make the LC6i the perfect solution to your OEM headaches. The LC6i allows for the addition of aftermarket processors and amplifiers while maintaining the use of the factory volume and steering wheel controls. Internal signal summing and AudioControl’s new GTO™ signal-sense turn-on make the LC6i a perfect OEM interface for a performance audio system. The LC6i follows in the steps of the rampantly successful LC8 Eight Channel Line Output Converter, offering all the same features for 6-channel systems at a reduced price. The LC6i accepts speaker-level signals, both crossed-over and full range, and converts them to high-quality pre-amp signals. Signals from factory radios with built-in crossovers can be overcome by summing them together internally to provide a full-range preamp signal. The LC6i provides the type of clean pre-amp signals installers are familiar with. Those who desire custom control over the sound can easily add one of AudioControl’s many crossovers or equalizers, which offer unlimited system design flexibility different from traditional OEM interfaces. General Features: Six Input and Output Channels 6 Speaker Level Inputs - Can Accept 400-Watt Signals! Signal sensing inputs Internal Channel Summing AutoMode inputs Level matching controls 12-volt trigger output Line Output Converter: A device for converting a powered (or amplified) signal into a pre-amp line level (or non-powered) signal Input for optional subwoofer level control: AudioControl ACR-1 Color: Black Weight: 3.5 lbs Size: 8.00" W x 6.00" D x 1.20" H Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) LC6i Specifications: Maximum speaker-level input: 400 watts @ 4 ohms Maximum output level: 9.5Vrms Output gain: +/-12 dB Frequency response: 10Hz-22kHz Total harmonic distortion: 0.01% Input Impedance: 20K Ohms Power supply: High headroom PWM switching Power draw: 200mA Recommended fuse rating: 1 Amp Remote Trigger Output Current: 1 Amp What is in the LC6i box: 6-Channel line-output converter Instructions/Specs/Warranty (on packaging) Quality Control Certificate AudioControl LC6i owner's manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-50% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Audio Control LC6i 6-channel line output converter — add aftermarket amps to a factory system (Black) $180.00 $360.00

Audio Control LC6i 6-channel line output converter — add aftermarket amps to a factory system (Black) AudioControl's LC6i 6-channel line output converter (LOC) allows you to add aftermarket amps, speakers, and subs to your car's factory radio, so you can enjoy better and more powerful sound without losing climate controls, voice-activated functions or other built-in factory features. The LC6i accepts speaker-level signals so you can use it with any setup, even high-powered amplified systems. General Features: 6-channel line output converter 6 speaker-level inputs (each can handle up to 400 watts RMS) internal channel summing 6 preamp outputs (up to 9.5 volts RMS) level matching controls with Maximized Indicator LED Other Features: optional wired remote subwoofer level controller available (#161ACR1) AutoMode™ turns 4-channel input to 6-channel output GTO™ signal-sensing turn on 12-volt turn-on lead output recommended fuse rating: 1 amp 8-1/16"W x 1-3/8"H x 7-1/2"D ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-26% sale

Audio Control LC6i<br/> 6 Channel Line Out Converter with Internal Summing for add aftermarket amps to a factory system

00
DAYS 00
HRS 00
MIN 00
SEC

Audio Control LC6i
6 Channel Line Out Converter with Internal Summing for add aftermarket amps to a factory system $185.00 $249.99

Audio Control LC6i 6 Channel Line Out Converter with Internal Summing for adding aftermarket amps to a factory system AudioControl continues to simplify OEM integration with the new LC6i Six Channel Line Output Converter with internal summing. The LC6i is built on the same technology as its predecessor, the LC6. The LC6i converts speaker-level inputs from a factory radio or factory amplifier into high-quality pre-amp signals. The addition of internal summing capabilities and improved GTO™ signal-sense turn-on make the LC6i the perfect way to solve your OEM headaches. The LC6i allows for the addition of aftermarket processors and amplifiers while maintaining the use of the factory volume and steering wheel controls. Internal signal summing and AudioControl’s new GTO™ signal-sense turn-on make the LC6i a perfect OEM interface for a performance audio system. The LC6i follows in the steps of the rampantly successful LC8 Eight Channel Line Output Converter, offering all the same features for 6 channel systems at a reduced price. The LC6i accepts speaker level signals, both crossed-over, and full range, and converts them to high-quality pre-amp signals. Signals from factory radios with built-in crossovers can be overcome by summing them together, internally, to provide a full-range preamp signal. The LC6i provides the type of clean pre-amp signals installers are familiar with. Those who desire custom control over the sound can easily add one of AudioControl’s many crossovers or equalizers which offer unlimited system design flexibility, clearly different than traditional OEM interfaces. General Features: Six Input and Output Channels 6 Speaker Level Inputs - Can Accept 400-Watt Signals! Signal sensing inputs Internal Channel Summing AutoMode inputs Level matching controls 12-volt trigger output Line Output Converter: A device for converting a powered (or amplified) signal into a pre-amp line level (or non-powered) signal Input for optional subwoofer level control: AudioControl ACR-1 Color: Black Weight: 3.5 lbs Size: 8.00" W x 6.00" D x 1.20" H Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) LC6i Specifications: Maximum speaker-level input: 400 watts @ 4 ohms Maximum output level: 9.5Vrms Output gain: +/-12 dB Frequency response: 10Hz-22kHz Total harmonic distortion: 0.01% Input Impedance: 20K Ohms Power supply: High headroom PWM switching Power draw: 200mA Recommended fuse rating: 1 Amp Remote Trigger Output Current: 1 Amp What is in the LC6i box: 6-Channel line-output converter Instructions/Specs/Warranty (on packaging) Quality Control Certificate AudioControl LC6i owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-34% sale

Audio Control LC7i & ACR-1 6 Channel Line Out Converter with bass restoration adds aftermarket subs and amps to a factory system & ACR-1 Dash Remote

00
DAYS 00
HRS 00
MIN 00
SEC

Audio Control LC7i & ACR-1 6 Channel Line Out Converter with bass restoration adds aftermarket subs and amps to a factory system & ACR-1 Dash Remote $199.99 $299.98

Audio Control LC7i, 6 Channel Line Out Converter with bass restoration, adds aftermarket subs and amps to a factory system & ACR-1 Dash Remote The AudioControl LC7i, six channel active line converter, allows all music lovers, who want a great in-car audio experience, to keep their factory-installed source unit and dramatically improve their system performance. The LC7i delivers excellent sound quality and fixes one of the biggest letdowns of today’s factory systems, weak BASS! Designed for maximum sound quality and enhanced audio performance, the LC7i incorporates AccuBASS™. This patented process automatically corrects for the bass roll-off that is common with many factory-installed audio systems. AudioControl’s unique and exclusive AccuBASS™ circuitry maintains and restores the Bass as the volume increases, improving the audio performance. The LC7i allows the flexibility of powering the audio signals downstream to single or multiple factory amps, maximizing sound quality and achieving high output at a great price. In addition, the LC7i is designed to fit into a compact chassis, allowing an easy and flexible factory system upgrade in today’s space-constrained vehicles. The ACR-1 dash remote (sold separately) allows the user to control the level of the low-frequency output. Add remote-level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. It comes with a 20-foot cable and removable mounting enclosure (for custom dash installations). General Features: Six Input and Output Channels 6 Speaker Level Inputs - Can Accept 400-Watt Signals! Signal sensing inputs GTO (Great Turn-On) Circuit Internal Channel Summing AutoMode inputs Level matching controls 12-volt trigger output Line Output Converter: A device for converting a powered (or amplified) signal into a pre-amp line level (or non-powered) signal Input for optional subwoofer level control: AudioControl ACR-1 Color: Black Weight: 3.0 lbs Size: 7.5" W x 4.72" D x 1.22" H Authorized Dealer 5-Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) LC7i Specifications: Maximum speaker-level input: 400 watts @ 4 ohms Maximum output level: 8.5Vrms Output gain: ±15 dB Frequency response: 10Hz - 22,000 Hz Total harmonic distortion: 0.01% Input Impedance: 20 Kohms Output Impedance: 150 ohms Power supply: High headroom PWM switching Power draw: 350mA Recommended fuse rating: 2 Amp Remote Trigger Output Current: 1 Amp What is in the LC7i box? 6-Channel line-output converter Instructions/Specs/Warranty (on packaging) Quality Control Certificate AudioControl LC7i owner's manual AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors Add remote-level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. It comes with a 20-foot cable and removable mounting enclosure (for custom dash installations). General Features Wired Remote Level Control Mounts on the dash using the built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5-Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) compatible with 6XS ACM-1.300 The Epicenter® Concert Series LC2i LC6i LC7i Overdrive Plus Matrix Plus LC-4.800 LC-6.1200 Legacy products supported LC6 LC8 Original Epicenter® (bypass not supported) What is in the ACR-1 package? Remote dash mount control 20' RJ-14 cable. Mounting Instructions on the packaging ACR-1 owner's manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-57% sale

Audio Control LC7i 6-channel line output converter with bass restoration — adds aftermarket subs and amps to a factory system (Black)

00
DAYS 00
HRS 00
MIN 00
SEC

Audio Control LC7i 6-channel line output converter with bass restoration — adds aftermarket subs and amps to a factory system (Black) $215.00 $499.98

Audio Control LC8i 8-channel line output converter — add amps and subs to a factory system (Black) AudioControl's LC8i 8-channel line output converter (LOC) allows you to add aftermarket amps, speakers, and subs to your car's factory radio, so you can enjoy better and more powerful sound without losing climate controls, voice-activated functions or other built-in factory features. The LC8i accepts speaker-level signals, so you can use it with just about any setup, even high-powered amplified systems. General Features: 8-channel line output converter with auxiliary input 8 speaker-level inputs (each can handle up to 400 watts RMS) internal channel summing 1 pair of RCA auxiliary inputs 8 preamp outputs (up to 8.5 volts RMS) level matching controls with Maximized Indicator LED Other Features: wired remote controls auxiliary and subwoofer levels AutoMode™ turns 6-channel input to 8-channel output GTO™ signal-sensing turn on 12-volt turn-on lead output recommended fuse rating: 2 amps ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-50% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Audio Control LC8i 8-channel line output converter — add amps and subs to a factory system (Black) $269.99 $539.98

Audio Control LC8i 8-channel line output converter — add amps and subs to a factory system (Black) AudioControl's LC8i 8-channel line output converter (LOC) allows you to add aftermarket amps, speakers, and subs to your car's factory radio, so you can enjoy better and more powerful sound without losing climate controls, voice-activated functions or other built-in factory features. The LC8i accepts speaker-level signals, so you can use it with just about any setup, even high-powered amplified systems. General Features: 8-channel line output converter with auxiliary input 8 speaker-level inputs (each can handle up to 400 watts RMS) internal channel summing 1 pair of RCA auxiliary inputs 8 preamp outputs (up to 8.5 volts RMS) level matching controls with Maximized Indicator LED Other Features: wired remote controls auxiliary and subwoofer levels AutoMode™ turns 6-channel input to 8-channel output GTO™ signal-sensing turn on 12-volt turn-on lead output recommended fuse rating: 2 amps ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-39% sale

Audio Control The Epicenter & Absolute KIT4<br/> Digital Bass Restoration Processor Bass Booster Expander with Remote & Absolute 4 Gauge Amp Kit

00
DAYS 00
HRS 00
MIN 00
SEC

Audio Control The Epicenter & Absolute KIT4
Digital Bass Restoration Processor Bass Booster Expander with Remote & Absolute 4 Gauge Amp Kit $179.00 $289.99

Audio Control The Epicenter Concert Series Digital Bass Restoration Processor Bass Booster Expander with Remote & Absolute 4 Gauge Amp Kit Audio Control THE EPICENTER 2-Channel Concert Series Digital Bass Restoration Processor with Bass Remote Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave. Give your subwoofers the juice to go lower and hit harder. The Epicenter uses a bass circuit to drive your subwoofers lower, grabbing the attention of every eye on the boulevard. General Features: Active Epicenter Series 2 channel digital bass restoration and line output converter Designed to integrate with after-market or factory OEM systems Digital bass restoration restores bass roll-off in factory systems Speaker level inputs Bass/Gain level remote: Yes Signal-Sensing turn-on: Yes Preamp outputs: 1 pair Bass Maximizer circuitry Multiple turn-on options PFM Subsonic Filter bypass option Selectable impedance load: 20, 60, 20k ohms Frequency response: 10 - 100,000 Hz Subsonic filter: 20 Hz, 12/dB octave Signal-to-noise ratio: >130 dB Total harmonic distortion (THD): 0.003% Fuse Rating: 1A x 1 Dimensions: 8-1/16"W x 1-1/4"H x 6-3/4"H Weight: 1.70lbs Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the THE EPICENTER package: The Epicenter owner's manual Pre-amp Bass Restoration Processor black Remote dash mount control Absolute KIT-4 Complete 4 Gauge Amplifier Kit Absolute USA Designed the Kit4 4 Gauge Premium Wiring Kit to Deliver Unrivaled Amounts of Power and Performance When Installing Your Amplifier. This 4 Gauge Wiring Kit Is Great for Powering Systems Up To 2000 Watts and Will Allow Your Amplifier to Perform at Its Full Potential. Helps You Make Connections and Brings Power to Your Radio, Subwoofers, And Speakers. High Performance and Professional Car Audio, Ideal for With Any Car Amplifier System. Product Features: Complete 4 Gauge Amplifier Kit 4-Gauge Premium CCA Wire 100% Oxygen-Free Designed Specifically for Car Audio Systems Up To 1000 Watts Premium Power and Ground Wire Provides Optimal Power Transfer Includes 2-Channel RCA Interconnect Cables for The Audio Signal Connection from the Receiver to The Amplifier Terminals Are Gold-Plated for Excellent Signal Transfer For Use in Any Car, Truck, RV, Or Boat Authorized Internet Dealer 1-Year Manufacturer's Warranty What is in the KIT4 package: 17 Ft. of Red 4 AWG High Current Power Cable 3 Ft. of Black 4 AWG Ground Cable 15 Ft. of RCA Triple Shielded Interconnect Audio Cable with Built-In Remote Wire 20 Ft. of 12 Awg Ofc Speaker Cable 20 Ft. of 16 Awg Remote Turn-On Wire 6 Ft. of Split Loom Tubing 1 Gold Plated 80 Amp AGU Fuse 1 4 Awg Gold Ring Terminal 1 4 Awg Water-Resistant Inline Fuse Holder 2 Ring Terminals 2 Spade Terminals (4 Gauge) ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-46% sale

Audio Control The Epicenter & Cerwin-Vega EQ-770

00
DAYS 00
HRS 00
MIN 00
SEC

Audio Control The Epicenter & Cerwin-Vega EQ-770 $245.99 $449.99

Audio Control The Epicenter & Cerwin-Vega EQ-770 Digital Bass Restoration Processor Bass Booster Expander with Remote & 7-Band Graphic EQ with Parametric E Auxiliary Input Audio Control THE EPICENTER 2-Channel Concert Series Digital Bass Restoration Processor with Bass Remote Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave. Give your subwoofers the juice to go lower and hit harder. The Epicenter uses a bass circuit to drive your subwoofers lower, grabbing the attention of every eye on the boulevard. General Features: Active Epicenter Series 2 channel digital bass restoration and line output converter Designed to integrate with after-market or factory OEM systems Digital bass restoration restores bass roll-off in factory systems Speaker-level inputs Bass/Gain level remote: Yes Signal-Sensing turn-on: Yes Preamp outputs: 1 pair Bass Maximizer circuitry Multiple turn-on options PFM Subsonic Filter bypass option Selectable impedance load: 20, 60, 20k ohms Frequency response: 10 - 100,000 Hz Subsonic filter: 20 Hz, 12/dB octave Signal-to-noise ratio: >130 dB Total harmonic distortion (THD): 0.003% Fuse Rating: 1A x 1 Dimensions: 8-1/16"W x 1-1/4"H x 6-3/4"H Weight: 1.70lbs Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the THE EPICENTER package: The Epicenter owner's manual Pre-amp Bass Restoration Processor black Remote dash mount control Cerwin-Vega EQ-770 7-Band Graphic EQ with Parametric E Auxiliary Input The manufacturer's packaging and manual advertise this product as a parametric EQ. The product has a "graphic equalizer" printed on it, so that is what we are going with. EQ-770 is the most powerful equalizer. This device is equipped with several different rich sound output selections. Use the equalizer in the master channel of your audio to match the low-end, bass to full sound to your mix. Add back brilliant sounds to old digitalized recordings General Features: 7-Band Graphic Equalizer with Auxiliary Input Red illumination Master and subwoofer volume control 3 Sets of up to 7V preamp outputs (front, rear, and subwoofer) Subwoofer frequency and level control Nickel-plated RCA-level inputs Nickel-plated screw terminals Built-in fader control Authorized Internet Dealer 1-year Manufacturer's Warranty Product Specifications: Number of Bands: 7 Signal-to-noise ratio: 90dB Frequency response: 10 - 50000Hz Channel separation: 70dB What is in the EQ-770 package? EQ-770 owner's manual 7-Band Graphic Equalizer Quality Control Certificate Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Find anything you need

Products (13191)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER