Products – Page 446 – absoluteusa

AudioControl EPICENTER-INDASH Bass Maximizer and Restoration Processor $249.00 $499.99

Audio Control THE EPICENTER INDASH In-Dash Bass Maximizer and Restoration Processor (The Epicenter In-Dash) If you want the best bass possible and a way to measure how loud your system is playing, The Epicenter InDash car audio processor is the perfect product for you. The Epicenter InDash is an expert combination of bass enhancement circuits, a microphone, and a 160-dB SPL (sound pressure level) display. The display will show real-time SPL or hold the highest value so you can show your friends. It will also display voltage so you can monitor your vehicle’s electrical systems. With AudioControl’s unique Para-Bass equalization control, you select the frequency and bandwidth for the enhanced bass action. The Epicenter InDash car audio processor gives you great bass and a way to see the result. The Epicenter InDash uses AudioControl’s bass restoration circuitry, which adds lower octaves of bass to any performance auto sound system. In addition, The Epicenter InDash includes AudioControl’s Para-Bass equalization, which allows the user to fine-tune the bass response to their specific vehicle. The net result is more bass…louder. In addition to allowing users to maximize their bass response, the new The Epicenter InDash offers a specially designed microphone mounted on the front panel that can measure up to 160 dB. The SPL is then shown on an LED display on the front panel of The Epicenter InDash. Optionally, users of The Epicenter InDash may select to see their SPL measurement constantly updating or in a peak hold mode. The display also will show the system's power voltage with a one-tenth-volt resolution. All AudioControl autosound components are backed by our industry-leading FIVE-year parts and labor warranty when installed by an authorized dealer. General Features: Digital Bass Reconstruction Processor 160dB microphone In-dash design Switchable backlight illumination color(blue or red) SPL Display ParaBASS Equalization Speaker-level or line-level inputs Unique bass restoration circuit Battery voltage indicator Frequency Response: 10-100,000 Hz Total Harmonic Distortion: 0.003% Signal to Noise Ratio: >130 dB Maximum Output: 13.5V RMS Weight: 2 lbs Dimensions: 6-3/4"W x 5"D x 1"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the The Epicenter InDash package: The Epicenter InDash owner's manual In-Dash Bass Restoration Processor 2 Mounting brackets ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -26% sale

00
DAYS 00
HRS 00
MIN 00
SEC

AudioControl LC-1.1500 amplifier, ACR-1 Dash Remote $899.00 $1,200.00

AudioControl LC-1.1500 amplifier, ACR-1 Dash Remote This bundle includes an AudioControl LC-1.1500 High-Power Subwoofer Amplifier with Accubass and ACR-1 Dash Remote. AudioControl LC-1.1500 Mono Subwoofer AmplifierGeneral Features: mono subwoofer amplifier 850 watts RMS x 1 at 4 ohms (1,500 watts RMS x 1 at 2 ohms) Class D amp technology AccuBASS circuitry for improved bass response MILC (Maximum Input Level Control) LED optimization and clip indicators variable low-pass filter (30-230 Hz, 24 dB/octave) fixed subsonic filter: 24 Hz preamp and speaker-level inputs GTO (Great Turn-On) signal-sensing turn-on with speaker-level input optional wired remote level controller available fuse rating: 40A x 4 wiring and hardware not included with amplifier AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the ACR-1 package: Remote dash mount control 20' RJ-14 cable. Mounting Instructions on packaging ACR-1 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-23% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Audiocontrol Lc2I 2 Channel Line Out Converter with Accubass and ACR-1 Subwoofer Remote Control $154.00 $199.99

Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system & ACR-1 Dash Remote The LC2i is a compact, two-channel processor with active input circuitry. It can accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality pre-amp signals that can be directed to after-market processors and amplifiers. Users can enjoy maximum sound quality using factory volume and steering wheel controls. General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel. AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete-level controls GTO - Signal sensing inputs The 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt pre-amp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) The LC2i Specifications Maximum speaker level input: 400 watts per channel Maximum Preamp Output: 9.5Vrms / 13V peak Optional Dash Level Control Remote: +0dB / -19dB Frequency response: 10 Hz - 100,000 Hz; ±1dB Total harmonic distortion: 0.01% Signal to Noise ratio: >110dB Input Impedance: 20K ohms Output Impedance: 150 ohms Power draw: 150 mA Recommended fuse rating: 1 Amp Weight: 1 pound What's in the box: Two-Channel line-output converter Instructions/Specs/Warranty (on packaging) Quality Control Certificate AudioControl LC2i owner's manual AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the ACR-1 box: Remote dash mount control 20' RJ-14 cable. Mounting Instructions on packaging AudioControl ACR-1 owner's manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-46% sale

AudioControl LC2i 2-channel line output converter for adding amps to your factory system

00
DAYS 00
HRS 00
MIN 00
SEC

AudioControl LC2i 2-channel line output converter for adding amps to your factory system $109.00 $199.99

Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system The LC2i is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality preamp signals that can then be directed to after-market processors and amplifiers. As a result, users can enjoy maximum sound quality while maintaining factory volume and steering wheel controls. General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete-level controls GTO - Signal sensing inputs The 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt preamp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) The LC2i Specifications Maximum speaker level input: 400 watts per channel Maximum Preamp Output: 9.5Vrms / 13V peak Optional Dash Level Control Remote: +0dB / -19dB Frequency response: 10 Hz - 100,000 Hz; ±1dB Total harmonic distortion: 0.01% Signal to Noise ratio: >110dB Input Impedance: 20K ohms Output Impedance: 150 ohms Power draw: 150 mA Recommended fuse rating: 1 Amp Weight: 1 pound. What is in the package: LC2i owner's manual Two-Channel line-output converter Quality Control Certificate ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-23% sale

00
DAYS 00
HRS 00
MIN 00
SEC

AudioControl LC2i Line Out Converter Accubass Subwoofer Control & Dash Remote $154.00 $199.99

Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system & ACR-1 Dash Remote The LC2i is a compact, two-channel processor with active input circuitry. It can accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality pre-amp signals that can be directed to after-market processors and amplifiers. Users can enjoy maximum sound quality using factory volume and steering wheel controls. General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel. AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete-level controls GTO - Signal sensing inputs The 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt pre-amp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) The LC2i Specifications Maximum speaker level input: 400 watts per channel Maximum Preamp Output: 9.5Vrms / 13V peak Optional Dash Level Control Remote: +0dB / -19dB Frequency response: 10 Hz - 100,000 Hz; ±1dB Total harmonic distortion: 0.01% Signal to Noise ratio: >110dB Input Impedance: 20K ohms Output Impedance: 150 ohms Power draw: 150 mA Recommended fuse rating: 1 Amp Weight: 1 pound What's in the box: Two-Channel line-output converter Instructions/Specs/Warranty (on packaging) Quality Control Certificate AudioControl LC2i owner's manual AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the ACR-1 package: Remote dash mount control 20' RJ-14 cable. Mounting Instructions on packaging ACR-1 owner's manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-55% sale

AudioControl LC2i PRO 2-Channel Line Output Converter & Alpine SXE1726S Speakers Bundle

00
DAYS 00
HRS 00
MIN 00
SEC

AudioControl LC2i PRO 2-Channel Line Output Converter & Alpine SXE1726S Speakers Bundle $159.99 $350.00

AudioControl LC2i PRO 2-Channel Line Output Converter and Alpine SXE1726S Speakers Bundle. Audio Control LC2i PRO 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system & ACR-1 Dash Remote General Features: Two channels of active speaker level inputs - Accepts 400-watt signals per channel ACR-1 Dash Mount Wired Remote AccuBASS processing for correction of bass roll-off Fixed and variable outputs with discrete-level controls GTO - Signal sensing inputs The 12-Volt trigger that will turn on LC2i Dual amplifier 9.5-volt preamp outs Level matching controls 12 Volt trigger output Input for optional subwoofer level control: AudioControl ACR-1 Dimensions: 6-3/8"W x 3-1/8"D x 1-1/2"H Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) Weight: 1 pound Alpine SXE-1726S 6-1/2" 220 Watts 2-Way Coaxial SpeakersGeneral Features: Rated Power: 40 Watts RMS Peak Power: 220 Watts Nominal Impedance: 4 Ohm Frequency Response: 60Hz - 200Hz Sensitivity: 92dB/W/m Neodymium Magnet Mylar-Titanium Balanced Dome Tweeter Ferrite Magnet Long Fibre Natural Pulp Cone High Polymer Foam Edge Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-43% sale

AudioControl LC2i PRO 2-channel line output converter with AccuBASS

00
DAYS 00
HRS 00
MIN 00
SEC

AudioControl LC2i PRO 2-channel line output converter with AccuBASS $139.00 $239.99

Audio Control LC2i Pro 2 Channel Line Out Converter with ACCUBASS w/ Dash Remote General Features: Adjustable 2-channel line out converter Separate level adjustment for each channel Two channels of active speaker-level inputs (up to 40V input handling) AccuBASS® processing for correction of bass roll-off ACR-1 dash remote included Load Selection Switch Ground Isolation Switch 400-watt maximum input AccuBASS circuitry restores the bass signal Total Harmonic Distortion: 0.01% Signal to Noise: >110 dB Frequency Response: 20 Hz – 50 kHz ±1 dB Dimensions: 6.9″L x 3″D x 1″H (including speaker connectors) Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: AudioControl LC2i PRO owner's manual Two-channel line output converter Two 4-pin captive-screw connectors (installed) ACR-1 Level control 16.5' Level-control cable (RJ-14) Quickstart guide (on cardboard label) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-37% sale

00
DAYS 00
HRS 00
MIN 00
SEC

AudioControl LC2i PRO 2-channel line output converter with AccuBASS™ $139.00 $219.99

AudioControl LC2i PRO 2-channel line output converter with AccuBASS™ High-level input line output converter More and more aftermarket amplifier installations depend on using the factory amp's powered outputs for its inputs. AudioControl's LC2i PRO line output converter takes amplified speaker-level signals and converts them into high-quality preamp signals that can then be fed to another processor, a full-range amplifier, or your subwoofer amp. Bass feature Some factory radios dial down the bass as you turn up the volume to protect the flimsy factory speakers. The problem is, they don't give it back when you upgrade to a nice set of aftermarket speakers. AudioControl packs the LC2i PRO with their AccuBASS™ circuitry that reverses the factory low-frequency roll-off, giving you the bass you need to enjoy your music to the fullest. Installation conveniences The included dash-mount wired remote control allows you to adjust the level of your sub channel on the go. Load selection switches make OEM integration easier, so the LC2i PRO will work with almost any factory sound system. Selectable turn-on modes include GTO™ Signal Sense (DC offset), audio sense, or remote 12 volt inputs. Product highlights: 2-channel active line output converter ACR-1 wired remote bass level control included 2 speaker-level inputs with 40-volt (400 watts RMS) power handling Main and Bass preamp-level outputs (up to 9.5 volts) Main and Bass output controls for level matching adjustable AccuBASS corrects for factory bass roll-off More Info: selectable turn-on options: GTO signal Sense (DC offset), audio sense, or remote 12 volt input 12-volt turn-on lead output recommended fuse rating: 1 amp dimensions: 6-15/16"W x 1"H x 3"D weight: 0.75 pound warranty: 5 years Two-Channel line output converter Two 4-pin captive-screw connectors (installed) ACR-1 Level control 16.5' Level-control cable (RJ-14) Quickstart guide (on cardboard label) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-37% sale

AudioControl LC2i PRO 2-channel line output converter+ Electrical Tape+ Phone Holder

00
DAYS 00
HRS 00
MIN 00
SEC

AudioControl LC2i PRO 2-channel line output converter+ Electrical Tape+ Phone Holder $139.00 $219.99

AudioControl LC2i PRO 2-channel line output converter+ Free Absolute Electrical Tape+ Phone Holderr High-level input line output converter More and more aftermarket amplifier installations depend on using the factory amp's powered outputs for its inputs. AudioControl's LC2i PRO line output converter takes amplified speaker-level signals and converts them into high-quality preamp signals that can then be fed to another processor, a full-range amplifier, or your subwoofer amp. Bass feature Some factory radios dial down the bass as you increase the volume to protect the flimsy factory speakers. The problem is, they don't give it back when you upgrade to a nice set of aftermarket speakers. AudioControl packs the LC2i PRO with their AccuBASS™ circuitry that reverses the factory low-frequency roll-off, giving you the bass you need to enjoy your music to the fullest. Installation conveniences The included dash-mount wired remote control allows you to adjust the level of your subchannel on the go. Load selection switches make OEM integration easier, so the LC2i PRO will work with almost any factory sound system. Selectable turn-on modes include GTO™ Signal Sense (DC offset), audio sense, or remote 12-volt inputs. Product highlights: 2-channel active line output converter ACR-1 wired remote bass level control included Two speaker-level inputs with 40-volt (400 watts RMS) power handling Main and Bass preamp-level outputs (up to 9.5 volts) Main and Bass output controls for level matching adjustable AccuBASS corrects for factory bass roll-off More Info: selectable turn-on options: GTO signal Sense (DC offset), audio sense, or remote 12-volt input 12-volt turn-on lead output recommended fuse rating: 1 amp dimensions: 6-15/16"W x 1"H x 3"D weight: 0.75 pound warranty: 5 years Two-channel line output converter Two 4-pin captive-screw connectors (installed) ACR-1 Level control 16.5' Level-control cable (RJ-14) Quickstart guide (on cardboard label) Absolute BT1700 Vinyl Electrical Tape is a high-quality, multi-purpose vinyl insulating tape that is highly resistant to moisture and varying weather conditions. It is a polyvinyl chloride (PVC) tape that is flame-retardant and conformable. Details Resists abrasion, moisture, alkalis, solvents, and acids Flame-retardant and inhibits the corrosion of electrical conductors Made of durable PVC Compatible with rubber and synthetic splicing compounds It withstands a temperature range of 32 to 194 °F (0 to 90 °C) UL Listed, CSA and VDE Certified Specifications Adhesive Type Rubber Application Insulation Brand Absolute Elongation at Break 200 % Maximum Operating Temperature (Celsius) 90 Degree Celsius Maximum Operating Temperature (Fahrenheit) 194 Degree Fahrenheit Minimum Operating Temperature (Fahrenheit) 32 Degree Fahrenheit Overall Length (Imperial) 60 ft Overall Length (Metric) 18 m Overall Width (Imperial) 0.75 in Overall Width (Metric) 19 mm Product Color Black Shelf Life 5 Year Tape Grade General Use Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-24% sale

00
DAYS 00
HRS 00
MIN 00
SEC

AudioControl LC6i 6 Channel Line Out Converter & ACR-1 Dash Remote $230.00 $299.99

Audio Control LC6i 6 Channel Line Out Converter with Internal Summing for adding aftermarket amps to a factory system & ACR-1 Dash Remote AudioControl continues to simplify OEM integration with the new LC6i Six Channel Line Output Converter with internal summing. The LC6i is built on the same technology as its predecessor, the LC6. The LC6i converts speaker-level inputs from a factory radio or factory amplifier into high-quality pre-amp signals. The addition of internal summing capabilities and improved GTO™ signal-sense turn-on make the LC6i the perfect way to solve your OEM headaches. The LC6i allows for the addition of aftermarket processors and amplifiers while maintaining the use of the factory volume and steering wheel controls. Internal signal summing and AudioControl’s new GTO™ signal-sense turn-on make the LC6i a perfect OEM interface for a performance audio system. The LC6i follows in the steps of the rampantly successful LC8 Eight Channel Line Output Converter, offering all the same features for 6 channel systems at a reduced price. The LC6i accepts speaker level signals, both crossed-over, and full range, and converts them to high-quality pre-amp signals. Signals from factory radios with built-in crossovers can be overcome by summing them together, internally, to provide a full-range preamp signal. The LC6i provides the type of clean pre-amp signals installers are familiar with. Those who desire custom control over the sound can easily add one of AudioControl’s many crossovers or equalizers which offer unlimited system design flexibility, clearly different than traditional OEM interfaces. General Features: Six Input and Output Channels 6 Speaker Level Inputs - Can Accept 400-Watt Signals! Signal sensing inputs Internal Channel Summing AutoMode inputs Level matching controls 12-volt trigger output Line Output Converter: A device for converting a powered (or amplified) signal into a pre-amp line level (or non-powered) signal Input for optional subwoofer level control: AudioControl ACR-1 Color: Black Weight: 3.5 lbs Size: 8.00" W x 6.00" D x 1.20" H Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) LC6i Specifications: Maximum speaker-level input: 400 watts @ 4 ohms Maximum output level: 9.5Vrms Output gain: +/-12 dB Frequency response: 10Hz-22kHz Total harmonic distortion: 0.01% Input Impedance: 20K Ohms Power supply: High headroom PWM switching Power draw: 200mA Recommended fuse rating: 1 Amp Remote Trigger Output Current: 1 Amp What is in the LC6i package: 6-Channel line-output converter Instructions/Specs/Warranty (on packaging) Quality Control Certificate LC6i owner's manual AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the ACR-1 package: Remote dash mount control 20' RJ-14 cable. Mounting Instructions on packaging ACR-1 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-8% sale

00
DAYS 00
HRS 00
MIN 00
SEC

AudioControl LC6i 6 Channel Line Out Converter & ACR-1 Dash Remote $230.00 $249.98

Audio Control LC6i 6 Channel Line Out Converter with Internal Summing for adding aftermarket amps to a factory system & ACR-1 Dash Remote AudioControl continues to simplify OEM integration with the new LC6i Six Channel Line Output Converter with internal summing. The LC6i is built on the same technology as its predecessor, the LC6. The LC6i converts speaker-level inputs from a factory radio or factory amplifier into high-quality pre-amp signals. The addition of internal summing capabilities and improved GTO™ signal-sense turn-on make the LC6i the perfect way to solve your OEM headaches. The LC6i allows for the addition of aftermarket processors and amplifiers while maintaining the use of the factory volume and steering wheel controls. Internal signal summing and AudioControl’s new GTO™ signal-sense turn-on make the LC6i a perfect OEM interface for a performance audio system. The LC6i follows in the steps of the rampantly successful LC8 Eight Channel Line Output Converter, offering all the same features for 6-channel systems at a reduced price. The LC6i accepts speaker-level signals, both crossed-over and full range, and converts them to high-quality pre-amp signals. Signals from factory radios with built-in crossovers can be overcome by summing them together internally to provide a full-range preamp signal. The LC6i provides the type of clean pre-amp signals installers are familiar with. Those who desire custom control over the sound can easily add one of AudioControl’s many crossovers or equalizers, which offer unlimited system design flexibility that is different from traditional OEM interfaces. Add remote-level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. It comes with a 20-foot cable and removable mounting enclosure (for custom dash installations). General Features: Six Input and Output Channels 6 Speaker Level Inputs - Can Accept 400-Watt Signals! Signal sensing inputs Internal Channel Summing AutoMode inputs Level matching controls 12-volt trigger output Line Output Converter: A device for converting a powered (or amplified) signal into a pre-amp line level (or non-powered) signal Input for optional subwoofer level control: AudioControl ACR-1 Color: Black Weight: 3.5 lbs Size: 8.00" W x 6.00" D x 1.20" H Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) LC6i Specifications: Maximum speaker-level input: 400 watts @ 4 ohms Maximum output level: 9.5Vrms Output gain: +/-12 dB Frequency response: 10Hz-22kHz Total harmonic distortion: 0.01% Input Impedance: 20K Ohms Power supply: High headroom PWM switching Power draw: 200mA Recommended fuse rating: 1 Amp Remote Trigger Output Current: 1 Amp What is in the LC6i box: 6-Channel line-output converter Instructions/Specs/Warranty (on packaging) Quality Control Certificate AudioControl LC6i owner's manual AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors Add remote-level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. It comes with a 20-foot cable and removable mounting enclosure (for custom dash installations). General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) compatible with 6XS ACM-1.300 The Epicenter® Concert Series LC2i LC6i LC7i Overdrive Plus Matrix Plus LC-4.800 LC-6.1200 legacy products supported LC6 LC8 Original Epicenter® (bypass not supported) What is in the ACR-1 box: Remote dash mount control 20' RJ-14 cable. Mounting Instructions on packaging AudioControl ACR-1 owner's manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-14% sale

00
DAYS 00
HRS 00
MIN 00
SEC

AudioControl LC7i 6 Channel Line Output Converter Accubass & Dash Remote $260.00 $299.98

Audio Control LC7i, 6 Channel Line Out Converter with bass restoration, adds aftermarket subs and amps to a factory system & ACR-1 Dash Remote. The AudioControl LC7i, a six-channel active line converter, allows music lovers who want a great in-car audio experience to keep their factory-installed source unit and dramatically improve their system performance. The LC7i delivers amazing sound quality and fixes one of the biggest letdowns of today’s factory systems: weak bass! Designed for maximum sound quality and enhanced audio performance, the LC7i incorporates AccuBASS™. This patented process automatically corrects for the bass roll-off that is common with many factory-installed audio systems. AudioControl’s unique and exclusive AccuBASS™ circuitry maintains and restores the Bass as the volume increases, improving the audio performance. The LC7i allows the flexibility of powering the audio signals downstream to single or multiple factory amps maximizing sound quality & achieving high output at a great price. In addition, the LC7i is designed to fit into a compact chassis allowing an easy & flexible factory system upgrade in today’s space constrained vehicles. The ACR-1 dash remote (sold separately) allows the user to control the level of the low-frequency output. Add remote-level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. It comes with a 20-foot cable and removable mounting enclosure (for custom dash installations). General Features: Six Input and Output Channels 6 Speaker Level Inputs - Can Accept 400-Watt Signals! Signal sensing inputs GTO (Great Turn-On) Circuit Internal Channel Summing AutoMode inputs Level matching controls 12-volt trigger output Line Output Converter: A device for converting a powered (or amplified) signal into a pre-amp line level (or non-powered) signal Input for optional subwoofer level control: AudioControl ACR-1 Color: Black Weight: 3.0 lbs Size: 7.5" W x 4.72" D x 1.22" H Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) LC7i Specifications: Maximum speaker-level input: 400 watts @ 4 ohms Maximum output level: 8.5Vrms Output gain: ±15 dB Frequency response: 10Hz - 22,000 Hz Total harmonic distortion: 0.01% Input Impedance: 20 Kohms Output Impedance: 150 ohms Power supply: High headroom PWM switching Power draw: 350mA Recommended fuse rating: 2 Amp Remote Trigger Output Current: 1 Amp What is in the LC7i box: 6-Channel line-output converter Instructions/Specs/Warranty (on packaging) Quality Control Certificate AudioControl LC7i owner's manual AudioControl Remote ACR-1 Dash Mount Wired Remote Level Control for Select AudioControl Sound Processors Add remote-level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. It comes with a 20-foot cable and removable mounting enclosure (for custom dash installations). General Features Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' power cable Authorized Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) compatible with 6XS ACM-1.300 The Epicenter® Concert Series LC2i LC6i LC7i Overdrive Plus Matrix Plus LC-4.800 LC-6.1200 legacy products supported LC6 LC8 Original Epicenter® (bypass not supported) What is in the ACR-1 box: Remote dash mount control 20' RJ-14 cable. Mounting Instructions on packaging AudioControl ACR-1 owner's manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

444 445 446 447 448

NATIONWIDE DELIVERY

At Absolute Pro Music, we are glad to ship to most countries! Check our list.

SECURE SHOPPING

We takes credit card information security seriously, we have implemented a variety of technical and procedural controls to ensure transactions on our site remain private and protected.

SHOP WITH CONFIDENCE

Absolute Pro Music wants to make sure that you are completely satisfied. If for some reason you aren't happy with product(s) and want to return it, we make returns simple.

HELP CENTER

You can simply give us a call at +1 800.674.27.24 , and our support staff will answer your call immediately! Explain your issue, what you'd like to change, or what you'd like to add onto your phone system, and get help in real time.

Absolute Pro Music

35 years providing the best sound experience to vibe, to share and simply to live !

Shop Car Audio & Video Pro Audio & Dj Equipment Marine Audio & Electronics Home Audio & Video Musical Instruments Packaging & Shipping Supplies Top Brands

Quick Links About Us Contact us Shipping & Returns Return policies In-Vehicle Videos related Laws Fits My Car Privacy Notice

Blogs Newsletter News DJ Equipment Guide Car Speakers, Sub-woofers and Amplifiers Guide

Top Brands Absolute USA Rockford Fosgate Alpine Pioneer

Find anything you need

Products (12542)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER