Products – Page 386 – absoluteusa

Alpine S-W10D4 1800W 10" S-Series Dual 4 Ohm Car Subwoofer $239.95 $319.90

Alpine S-W10D4 1800W Max (600W RMS) 10" S-Series Dual 4 Ohm Car Subwoofer Alpine introduces the all-new S-Series Subwoofers; their unique design substantially improves bass output and provides installation versatility. Each S-Series subwoofer uses a custom-stamped steel frame and is available in twelve, ten, and eight-inch. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They have frame leg vents, a vented back plate to help cool the subwoofer voice coil and motor parts, and a shallow design to help fit in smaller spaces. The S-Series Subwoofers incorporate two strontium ferrite magnets stacked together, providing increased motor strength and excursion, ultimately delivering an accurate bass to your music. The convenient push-type insert terminals with a dual voice coil jumper system will significantly reduce installation time. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal. At the same time, the concealed mount gasket system creates a clean, finished appearance for any vehicle. General Features: 10" 4 ohm S-Series (Type-S) Subwoofer RMS Power Handling: 600 watts Peak Power Handling: 1800 watts Recommended power range: 250- 600W RMS Pulp/Kevlar Cone High Amplitude Multi-Roll (HAMR) Surround Progressive Spider with Reinforced Layer Tinsel Leads Airflow Optimized Dual Flare Pole Vent High Strength Steel Frame Basket 8 AWG Push Terminals with VC Configuration Jumpers Dual Voice Coil High-Grade Strontium Ferrite Magnets Top-mount depth: 4-11/16" Cutout diameter: 8-13/16 Frequency Response: 26- 200Hz Sensitivity: 86.4dB Resonance Frequency (Fs): 33 Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the S-W10D4 package: S-W10D4 owner's manual One 10" Dual 4-ohm voice coil subwoofer Two 3" jumper cables Subwoofer Application Guide Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-25% sale

Alpine S-W10D4 Car Subwoofer<br/> 1800W Max, 600W RMS 10

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S-W10D4 Car Subwoofer
1800W Max, 600W RMS 10" S-Series Dual 4 Ohm Car Subwoofer $239.95 $319.90

Alpine S-W10D4 1800W Max (600W RMS) 10" S-Series Dual 4 Ohm Car Subwoofer Alpine introduces the all-new S-Series Subwoofers; their unique design substantially improves bass output and provides installation versatility. Each S-Series subwoofer uses a custom-stamped steel frame and is available in twelve, ten, and eight-inch. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They have frame leg vents, a vented back plate to help cool the subwoofer voice coil and motor parts, and a shallow design to help fit in smaller spaces. The S-Series Subwoofers incorporate two strontium ferrite magnets stacked together, providing increased motor strength and excursion, ultimately delivering an accurate bass to your music. The convenient push-type insert terminals with a dual voice coil jumper system will significantly reduce installation time. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal. At the same time, the concealed mount gasket system creates a clean, finished appearance for any vehicle. General Features: 10" 4 ohm S-Series (Type-S) Subwoofer RMS Power Handling: 600 watts Peak Power Handling: 1800 watts Recommended power range: 250- 600W RMS Pulp/Kevlar Cone High Amplitude Multi-Roll (HAMR) Surround Progressive Spider with Reinforced Layer Tinsel Leads Airflow Optimized Dual Flare Pole Vent High Strength Steel Frame Basket 8 AWG Push Terminals with VC Configuration Jumpers Dual Voice Coil High-Grade Strontium Ferrite Magnets Top-mount depth: 4-11/16" Cutout diameter: 8-13/16 Frequency Response: 26- 200Hz Sensitivity: 86.4dB Resonance Frequency (Fs): 33 Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the S-W10D4 package: S-W10D4 owner's manual One 10" Dual 4-ohm voice coil subwoofer Two 3" jumper cables Subwoofer Application Guide Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-29% sale

Alpine S-W12D2 RUX-KNOB.2 KTA-200M Mono Power Pack Amp with 12

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S-W12D2 RUX-KNOB.2 KTA-200M Mono Power Pack Amp with 12" Subwoofer and Bass Knob $569.95 $799.95

Alpine KTA-200M Mono Power Pack Amp with Alpine S-W12D2 12" Subwoofer and Bass Knob This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, an Alpine S-W12D2 S-Series 12" Dual 2-Ohm Subwoofer, and an Alpine RUX-KNOB.2 Remote Bass Knob. Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier The KTA-200M fits in the open space behind Alpine’s iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D) occupy the same depth as a traditional 2-DIN chassis, resulting in an easy-to-hideaway bass solution that adds more power to the sound system without occupying space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier in a compact size, easy installation, and overall power. Both amplifiers, designed to “stack” behind the iLX-W650 or similar 2-DIN radio, can also be used as standalone solutions in vehicles that lack space for a traditional amplifier. The KTA-200M produces 400 watts with Alpine’s DPP technology. During robust or “dynamic” passages of music, DPP will adapt to the music's needs by adjusting the amplifier's gain and delivering bursts of power that match the music's peak demands. Alongside this is the new voltage-adapting input circuit, which maintains the maximum source signal level without clipping. General Features: Power Stack is compatible with the Alpine iLX-W650 compact mono subwoofer amplifier Alpine’s Class D Amplifier Circuit with DPP Dynamic Peak Power (DPP) technology adds a burst of power when needed CTA-2006 compliant 100W x 1 RMS @ 4Ω, Power Outputs 200W x 1 RMS @ 2Ω, Power Outputs 400W x 1 DPP @ 4Ω, Power Outputs Signal to Noise Ratio 85dB (ref. 1W into 4Ω) ≤0.1% THD+N (ref. 10W into 2Ω) Single-side 22-pin connector selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave) preamp and speaker-level inputs RCA inputs (selectable, Low range=0.2-4V) Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable) wiring, hardware, and fuse are not included with the amplifier Power Stack bracket included for mounting the amp behind the Alpine iLX-W650 digital multimedia receiver Authorized Dealer 1-year Warranty Alpine S-W12D2 S-Series 12" Subwoofer with Dual 2-Ohm Voice coils. General Features: High Amplitude Multi-Roll Surround High Strength Steel Frame Perimeter venting with an airflow management system High-excursion underhung voice coil configuration Compound radius curve extended pole geometry Airflow-optimized dual flare pole vent 65mm voice coil with high-temp 5-layer DVC winding on aluminum former high-grade strontium ferrite magnets 15MM Xmax 64mm Xmech 600W RMS 5-1/16" mounting depth 10-9/16" Cutout Diameter Power handling: 250-600W RMS Sealed Enclosure range: .55-1.0 ft^3 Vented Enclosure Range: 1.0-1.5 ft^3 Vented tuning range: 32-37Hz Alpine RUX-KNOB.2 Remote Bass Knob With the RUX-KNOB installed inside the vehicle cabin, you can conveniently control your PDX-M6 or PDX-M12 amplifier and easily adjust its bass gain while seated inside. Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-26% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S-W12D4 12" Type S Car Audio Subwoofer with Rearfire Sealed Universal Custom Sub Box Enclosure Car Stereo $299.95 $400.00

Universal Car Stereo Rearfire Sealed Single 12" Alpine S-W12D4 Type S Car Audio Subwoofer Custom Sub Box Enclosure Package This Package Includes the Following Items: 1 x Absolute SS12 Car Audio Single 12" Sealed Subwoofer Sub Box Enclosure MDF Wood 1 x Alpine S-W12D4 Car Audio Type S Series Sub Dual 4 Ohm 1200W Peak 10" Subwoofer Alpine S-W12D4 1800W Max (600W RMS) 12" S-Series Dual 4 Ohm Car Subwoofer VERSATILE APPLICATIONS Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been redesigned from the ground up. The mounting depth of the 10” and 12” subwoofers is almost 1” more profound than that of previous models: just over 4.5” for the 10” models and just over 5” for the 12” models. This allows them to fit into a wide variety of installation applications. General Features: 12" 4 ohm S-Series (Type-S) Subwoofer Power Handling: Peak: 1800 watts RMS: 600 watts Recommended power range: 250- 600W RMS Pulp/Kevlar Cone High Amplitude Multi-Roll (HAMR) Surround Progressive Spider with Reinforced Layer Tinsel Leads Airflow Optimized Dual Flare Pole Vent High Strength Steel Frame Basket 8 AWG Push Terminals with VC Configuration Jumpers Dual Voice Coil High-Grade Strontium Ferrite Magnets Top-mount depth: 5-1/16" Cutout diameter: 10-9" Frequency Response: 26- 200Hz Sensitivity: 86.4dB Resonance Frequency (Fs): 31 Hz Authorized Dealer 1-year Manufacturer's Warranty What is in the S-W12D4 package: Alpine S-W12D4 owners manual One 12" Dual 4-ohm voice coil subwoofer Two 3" jumper cables (each has a single banana connector on each end) Subwoofer Application Guide Online product registration information Warranty information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-11% sale

Alpine S-W12D4 Car Subwoofer 1800W Max, 600W RMS 12

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S-W12D4 Car Subwoofer 1800W Max, 600W RMS 12" Type-S Series Dual 4 Ohm Car Subwoofer $269.95 $300.00

Alpine S-W12D4 1800W Max (600W RMS) 12" Type-S Series Dual 4 Ohm Car Subwoofer VERSATILE APPLICATIONS Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers are almost 1” more shallow than previous models at just over 4.5” for the 10” models and just over 5” for the 12” models, allowing them to fit into a wide variety of installation applications. General Features: 12" 4 Ohm Type-S Series Subwoofer Power Handling: Peak: 1800 watts RMS: 600 watts Recommended power range: 250- 600W RMS Pulp/Kevlar Cone High Amplitude Multi-Roll (HAMR) Surround Progressive Spider with Reinforced Layer Tinsel Leads Airflow Optimized Dual Flare Pole Vent High Strength Steel Frame Basket 8 AWG Push Terminals with VC Configuration Jumpers Dual Voice Coil High-Grade Strontium Ferrite Magnets Top-mount depth: 5-1/16" Cutout diameter: 10-9" Frequency Response: 26- 200Hz Sensitivity: 86.4dB Resonance Frequency (Fs): 31 Hz Authorized Dealer 1-year Manufacturer's Warranty What is in the S-W12D4 package: Alpine S-W12D4 owners manual One 12" Dual 4-ohm voice coil subwoofer Two 3" jumper cables Subwoofer Application Guide Online product registration information Warranty Information ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

16% sale

Alpine S-W8D2 Car Subwoofer<br/> 900W Max, 300W RMS 8

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S-W8D2 Car Subwoofer
900W Max, 300W RMS 8" S-Series Dual 2 Ohm Car Subwoofers $209.95 $180.00

Alpine S-W8D2 900W Max (300W RMS) 8" S-Series Dual 2 Ohm Car Subwoofers ADD BASS TO PRACTICALLY ANY VEHICLE Don’t think you have room for a subwoofer? Think again. The new S-W8D2 and S-W8D4 8” S-Series subwoofers have a shallow mounting depth of just 3-3/4” and can be used in a sealed box enclosure as small as .15 cubic foot. It is perfect for under-seats, behind rear bench seats in trucks, or even in some door applications. General Features: 8" 2 Ohm S-Series Subwoofer Power Handling: Peak: 900 watts RMS: 300 watts Recommended power range: 150 - 300 RMS Kevlar Reinforced Pulp Cone HAMR Santoprene Rubber Surround High Strength Steel Frame Basket Concealed Mount Gasket High Strength Steel Frame Basket 10 AWG Push Terminals High Excursion Underhung Voice Coil Configuration High-Grade Strontium Ferrite Magnet Top-mount depth: 3-3/4" Cutout diameter: 6-7/8" Frequency Response: 34 - 200 Hz Sensitivity: 83dB Resonance Frequency (Fs): 48 Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the S-W8D2 package: 8" Dual 2-ohm voice coil subwoofer Alpine S-W8D2 owner's manual 1 Rubber concealing ring Two 3" jumper cables Subwoofer Application Guide Online product registration information Warranty information Important Notice! ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

4% sale

Alpine S-W8D4 Car Subwoofer<br/> 900W Max (300W RMS) 8

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S-W8D4 Car Subwoofer
900W Max (300W RMS) 8" S-Series Dual 4 Ohm Car Subwoofers $209.95 $200.00

Alpine S-W8D4 900W Max (300W RMS) 8" Type S Series Dual 4 Ohm Car Subwoofer ADD BASS TO PRACTICALLY ANY VEHICLE Don’t think you have room for a subwoofer? Think again. The new S-W8D2 and S-W8D4 8” S-Series subwoofers have a shallow mounting depth of just 3-3/4” and can be used in a sealed box enclosure as small as .15 cubic feet. It is perfect for under-seats, behind rear bench seats in trucks, or even in some door applications. General Features: 8" 4 Ohm Type S Series Subwoofer Power Handling: Peak: 900 watts RMS: 300 watts Recommended Power Range: 150 - 300 Watts Kevlar Reinforced Pulp Cone HAMR Santoprene Rubber Surround Progressive Spider with Reinforced Layer Tinsel Leads Compound Radius Curve Extended Pole Geometry Perimeter Vented Frame with Airflow Management System 10 AWG Push Terminals 35mm Underhung Voice Coils Concealed Mount Gasket 34oz Ferrite Magnet Top-mount depth: 3-3/4" Cutout diameter: 6-7/8" Frequency Response: 34-200Hz Authorized Dealer 1-year Manufacturer's Warranty Priced Individually What's in the S-W8D4 package: 8" Dual 4-ohm voice coil subwoofer Alpine S-W8D4 owner's manual 1 Rubber concealing ring Two 3" jumper cables Subwoofer Application Guide Online product registration information Warranty information Important Notice! ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-37% sale

Alpine S2-A120M Amplifier + RUX-KNOB.2 + 2 S2-SB10V Enclosure + KTX-H12

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S2-A120M Amplifier + RUX-KNOB.2 + 2 S2-SB10V Enclosure + KTX-H12 $1,269.99 $2,000.00

Alpine S2-A120M S-Series Class-D Mono Subwoofer Amplifier, Hi-Res Certified, 1200W RMS at 1 & 2-Ohm + RUX-KNOB.2 Bass Knob Remote Control + 2 Alpine S2-SB10V 1800 Peak (600W RMS) Loaded Single 10" Vented Subwoofer Enclosure + Alpine KTX-H12 Linking Bracket for Two Single 12" Alpine Halo Loaded Subwoofer Enclosures Alpine S2-A120M 1200W Class D RMS S-Series Monoblock Car Amplifier Entry-level sound just got elevated with the S2-A120M Mono Amplifier. Its sleek design houses an Alpine Class D Amplifier Circuit with 1200W of powerful bass performance.General Features:• 1200W Mono Amplifier• Alpine’s Class D Amplifier Circuit• Two-Sided Terminal Layout• Built-in Selectable / Adjustable Crossovers• Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately) Alpine S2-SB10V 1800 Peak (600W RMS) Loaded Single 10" Vented Subwoofer Enclosure. Alpine KTX-H12 Linking Bracket for Two Single 12" Alpine Halo Loaded Subwoofer Enclosures Alpine RUX-KNOB.2 Dash Mount Wired Bass Remote Controller for Alpine Amplifiers Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-28% sale

Alpine S2-A120M Class-D Mono Subwoofer Amplifier 1200W + Bass Control Knob

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S2-A120M Class-D Mono Subwoofer Amplifier 1200W + Bass Control Knob $479.90 $660.00

Alpine S2-A120M S-Series Class-D Mono Subwoofer Amplifier, Hi-Res Certified, 1200W RMS at 1 & 2-Ohm + RUX-KNOB.2 Bass Knob Remote Control Entry-level sound just got elevated with the S2-A120M Mono Amplifier. Its sleek design houses an Alpine Class D Amplifier Circuit with 1200W of powerful bass performance.Unparalleled Power - Alpine’s S-Series S2-A120M 1200W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 1200W at 1 ohm or 2 ohms, this mono amp can drive even the most demanding subwoofers, delivering clean, distortion-free bass for a wide range of applications.Simplified Installation – The amplifier was intentionally designed with sound controls on the side panels, rather than the top panel, making it easier to access gain and crossover controls when installed under vehicle seats or in shallow-depth locations. Removable end caps were added to cover the side controls and connections, providing a clean, sleek finish to the amplifier.General Features:• 1200W Mono Amplifier• Alpine’s Class D Amplifier Circuit• Two-Sided Terminal Layout• Built-in Selectable / Adjustable Crossovers• Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)TECH SPECS:• Dimensions: 13.1” W x 2.25” H x 8.25” D• Weight: 8 lbs, 11 oz• Power Rating: 14.4V, < 0.1% THD +N• Power Output: 600W x 1 @ 4Ω, 1200W x 1 @ 2Ω, 1200W x 1 @ 1Ω• S/N Ratio: >85dB• Frequency Response: 20Hz – 400Hz• Damping Factor: >750WHAT’S IN THE BOX:• (x1) S2-A120M Mono Amplifier• (x2) Connection end covers w/4 attachment screws• Owner’s Manual• “Birth Sheet” that certifies by measurement the actual power of the amplifier in the box• (x4) Self-tapping screws• (x1) Hexagon wrench• Alpine Registration Card• Alpine Limited Warranty Sheet• Tips sheet for power supply wire connections Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-34% sale

Alpine S2-A120M S-Series Class-D Mono Subwoofer Amplifier 1200W RMS

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S2-A120M S-Series Class-D Mono Subwoofer Amplifier 1200W RMS $439.95 $660.00

Alpine S2-A120M S-Series Class-D Mono Subwoofer Amplifier, Hi-Res Certified, 1200W RMS at 1 & 2-Ohm Entry-level sound just got elevated with the S2-A120M Mono Amplifier. Its sleek design houses an Alpine Class D Amplifier Circuit with 1200W of powerful bass performance.Unparalled Power - Alpine’s S-Series S2-A120M 1200W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 1200W at a 1ohm or 2ohm drive, this mono amp is capable of driving even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications.Simplified Installation – The amplifier was intentionally designed with sound controls located on the side panels, instead of the top panel, making it easier to access gain and crossover controls when installed under vehicle seats or in shallow-depth locations. Removable end caps were added to cover the side controls and connections, providing a clean, sleek finish to the amplifier.General Features:• 1200W Mono Amplifier• Alpine’s Class D Amplifier Circuit• Two-Sided Terminal Layout• Built-in Selectable / Adjustable Crossovers• Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)TECH SPECS:• Dimensions: 13.1” W x 2.25” H x 8.25” D• Weight: 8 lbs, 11 oz• Power Rating: 14.4V, < 0.1% THD +N• Power Output: 600W x 1 @ 4Ω, 1200W x 1 @ 2Ω, 1200W x 1 @ 1Ω• S/N Ratio: >85dB• Frequency Response: 20Hz – 400Hz• Damping Factor: >750WHAT’S IN THE BOX:• (x1) S2-A120M Mono Amplifier• (x2) Connection end covers w/4 attachment screws• Owner’s Manual• “Birth Sheet” that certifies by measurement the actual power of the amplifier in the box• (x4) Self-tapping screws• (x1) Hexagon wrench• Alpine Registration Card• Alpine Limited Warranty Sheet• Tips sheet for power supply wire connections Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-21% sale

Alpine S2-A36F 4-Channel Car Amplifier, 60 Watts RMS x 4

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S2-A36F 4-Channel Car Amplifier, 60 Watts RMS x 4 $239.95 $299.99

Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier The next generation of Alpine S-Series amplifiers is designed to enhance your car audio experience without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so that you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box. General Features: Hi-Res Audio Certified (Up to 40kHz) Power Rating: 14.4V, < 0.3% THD +N Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω Bridged Power: 180W RMS x 2 @ 4Ω 4-Channel Amplifier Alpine’s Class D Amplifier Circuit Two-sided terminal layout Built-in Selectable/ Adjustable Crossovers Mid-Bass EQ Input for more power Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately) Dimensions: 8.7” W x 2.25” H x 8.25” D Weight: 4 lbs, 13 oz S/N Ratio: >83dB Frequency Response: 20Hz – 40kHz Damping Factor: >100 Owner’s Manual 4 Self-tapping screws Hexagon wrench What is in the S2-A36F package: S2-A36F owner's manual 4-Channel amplifier One 40-amp ATO fuse Four 3/4" Screws 2mm Allen wrench Alpine Verification Certificate Warranty information Online product registration information Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-13% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S2-A36F 4 Ch Amp + S2-S69 6X9" S2-S50 5.25" Speakers + 4G Wiring Kit $609.99 $699.85

Alpine S2-A36F 4 Channel Amplifier, S-S69 6X9" Coax Speakers, S-S50 5.25" Coax Speakers and Absolute KIT4 4 Gauge Wiring Kit This bundle includes an Alpine S2-A36F 4-Channel V-Power Amplifier, an 8 Gauge Wiring Kit, a pair of Alpine S-Series S-S69 6x9" Coaxial Speakers, and a pair of Alpine S-S50 S-Series 5.25-inch Coaxial 2-Way Speakers. Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier The next generation of Alpine S-Series amplifiers is designed to enhance your car audio experience without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle. General Features: Hi-Res Audio Certified (Up to 40kHz) Power Rating: 14.4V, < 0.3% THD +N Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω Bridged Power: 180W RMS x 2 @ 4Ω 4-Channel Amplifier Alpine’s Class D Amplifier Circuit Two-sided terminal layout Built-in Selectable/ Adjustable Crossovers Mid-Bass EQ Input for more power Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately) Dimensions: 8.7” W x 2.25” H x 8.25” D Weight: 4 lbs, 13 oz S/N Ratio: >83dB Frequency Response: 20Hz – 40kHz Damping Factor: >100 Owner’s Manual 4 Self-tapping screws Hexagon wrench Alpine S2-S69 520W Max (170W RMS) 6" x 9" Type S Series 2-Way Coaxial Car Speakers General Features: 6" x 9" Type S Series 2-Way Coaxial Car Speakers Power Handling: Peak: 520 watts per pair / 260 watts each Power Handling: RMS: 170 watts per pair / 85 watts each Recommended Power Range: 10 - 85 watts RMS per channel Carbon Fiber Reinforced Plastic (CFRP) Cone High Amplitude Multi-Roll (HAMR) Surround 1" Silk Dome Tweeter Rubber magnet boot cover CEA-2031 compliant speakers 35mm Voice Coil Top-mount Depth: 2-15/16" Cutout Dimensions: 5-29/32" x 8-3/4" 4 ohms Impedance Frequency Response: 65 - 22000 Hz Sensitivity: 90dB Compatible with the Alpine KTE-S69G Grille Authorized Dealer 1-year Manufacturer's Warranty Alpine S2-S50 340W Max (110W RMS) 5 1/4" Type S Series 2-Way Coaxial Car Speakers General Features: 5 1/4" S-Type Series TYPE Car Speakers/Component System Peak Power Handling: 340 watts per pair / 170 watts each RMS Power Handling: 110 watts per pair / 55 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 3/4" Silk dome tweeter CTA-2031 compliant speakers 30MM Voice Coil Top-mount Depth: 2" 4 ohms impedance Frequency Response: 73 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Find anything you need

Products (15464)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER