Products – Page 377 – absoluteusa

Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier $239.95 $280.00

Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier The all-new S-Series amplifiers pack a punch with even more performance and value. Experience hard-hitting bass and long hours of limitless play with the S-A32F 4-channel amplifier. These amplifiers offer great value with over 20% more power through increased watt handling. The exceptional strength and resistance are supported by optimizing a heat thermal management processor to ensure exceptional reliability. You can enjoy your music with the bass cranked up for hours without any power shutdown.General Features: Alpine S-Series S-A32F 4/3/2 Channel Power Amplifier S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. S-Series Amplifier: Known for reliable performance and value-oriented products. Power Output: 55W RMS x 4 (4ohm, 14.4V ≤ 1% THD+N) 80W RMS x 4 (2ohm, 14.4V≤ 1% THD+N) Bridged: 160W RMS x 2 (4ohm, 14.4V ≤ 1% THD+N) Total power output: 320 watts CEA-2006 Compliant Amplifier LED Power/Protect Light Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and short speaker protection) Frequency Response: 10 - 30,0000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 83 dB Variable high-pass filter: 50 - 400 Hz, 12 dB/octave Variable low-pass filter: 50 - 400 Hz, 12 dB/octave Fuse Rating: 40 Improved heat sink and protection circuit design Contain technology currently implemented in the Alpine R and X-Series models 105dB Signal-to-Noise (S/N) ratio at rated power 46 degrees of phase shift Designed to perform perfectly with the existing S-Series speakers and subwoofers Dimensions: 8” W x 8” H x 2.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the S-A32F package: S-A32F owner's manual 4-Channel amplifier One 40-amp ATO fuse Four 3/4" Screws 2mm Allen wrench Alpine Verification Certificate Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-15% sale

Alpine S-A32F S-Series 4-Channel Digital Amplifier 80 Watts RMS x 4

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S-A32F S-Series 4-Channel Digital Amplifier 80 Watts RMS x 4 $239.95 $280.00

Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier The all-new S-Series amplifiers pack a punch with even more performance and value. Experience hard-hitting bass and long hours of limitless play with the S-A32F 4-channel amplifier. These amplifiers offer great value with over 20% more power through increased watt handling. The exceptional strength and resistance are supported by optimizing a heat thermal management processor to ensure outstanding reliability. You can enjoy your music with the bass cranked up for hours without any power shutdown.General Features: Alpine S-Series S-A32F 4/3/2 Channel Power Amplifier S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. S-Series Amplifier: Known for reliable performance and value-oriented products. Power Output: 55W RMS x 4 (4ohm, 14.4V ≤ 1% THD+N) 80W RMS x 4 (2ohm, 14.4V≤ 1% THD+N) Bridged: 160W RMS x 2 (4ohm, 14.4V ≤ 1% THD+N) Total power output: 320 watts CEA-2006 Compliant Amplifier LED Power/Protect Light Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and short speaker protection) Frequency Response: 10 - 30,0000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 83 dB Variable high-pass filter: 50 - 400 Hz, 12 dB/octave Variable low-pass filter: 50 - 400 Hz, 12 dB/octave Fuse Rating: 40 Improved heat sink and protection circuit design Contain technology currently implemented in the Alpine R and X-Series models 105dB Signal-to-Noise (S/N) ratio at rated power 46 degrees of phase shift Designed to perform perfectly with the existing S-Series speakers and subwoofers Dimensions: 8” W x 8” H x 2.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the S-A32F package: S-A32F owner's manual 4-Channel amplifier One 40-amp ATO fuse Four 3/4" Screws 2mm Allen wrench Alpine Verification Certificate Warranty information Online product registration information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-17% sale

00
DAYS 00
HRS 00
MIN 00
SEC

ALPINE S-A55V $499.95 $600.00

Alpine S-A55V S-Series 5-Channel Class D Amplifier 540W RMS The Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers. S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. General Features: 5-channel Class D Amplifier Power Output: 40 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms 60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms 120 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms CTA-2006 compliant Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section Variable low-pass filter (50-400 Hz, 24 dB/octave) on a subchannel Variable bass boost (0-12 dB at 50 Hz) on a subchannel Optional RUX-KNOB.2 wired remote level control for a subchannel Preamp and speaker-level inputs speaker wire to RCA adapter required for speaker-level input Wiring and hardware not included with amplifier 4-gauge power and ground leads recommended Fuse rating: 30A x 2 Dimensions: 11-1/4" W x 2-1/4" H x 8" D Authorized Dealer 1-year Manufacturer's Warranty What's in the box: 5-Channel amplifier Two 30-amp ATO fuses (installed) Four 3/4" Screws 2mm Allen wrench Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Alpine S-A55V owner's manual ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-24% sale

ALPINE S-A55V 440w RMS 5-Channel S-Series Car Audio Amplifier Class D + Absolute 4 Gauge Amp Kit

00
DAYS 00
HRS 00
MIN 00
SEC

ALPINE S-A55V 440w RMS 5-Channel S-Series Car Audio Amplifier Class D + Absolute 4 Gauge Amp Kit $499.95 $650.00

Alpine S-A55V S-Series 5-Channel Class D Amplifier 540W RMS +Absolute 4 Gauge Amp Kit The Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers. S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. General Features: 5-channel Class D Amplifier Power Output: 40 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms 60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms 120 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms CTA-2006 compliant Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section Variable low-pass filter (50-400 Hz, 24 dB/octave) on a subchannel Variable bass boost (0-12 dB at 50 Hz) on a subchannel Optional RUX-KNOB.2 wired remote level control for a subchannel Preamp and speaker-level inputs speaker wire to RCA adapter required for speaker-level input Wiring and hardware not included with amplifier 4-gauge power and ground leads recommended Fuse rating: 30A x 2 Dimensions: 11-1/4" W x 2-1/4" H x 8" D Authorized Dealer 1-year Manufacturer's Warranty What's in the box: 5-Channel amplifier Two 30-amp ATO fuses (installed) Four 3/4" Screws 2mm Allen wrench Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Alpine S-A55V owner's manual Absolute KIT4OR Complete PRO Marine Auto Car RV 4 Gauge 2000 Watts Amplifier Complete Installation Amp Kit Power Wiring with Orange Accent Color Scheme Installing a car amplifier is already enough of a job without having to worry about where to find the right wire and installation accessories. What you might not know is that there are some gimmicks being played by some companies and you could end up getting ripped off! Today, I would recommend KIT4 for all DIY and Installer. This is a wiring kit with an easy-to-install AGU fuse holder and some seriously good wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels and works great, and it is much better than the typical 18 AWG wire most kits would include. General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provide optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of 4 AWG high current power cable 3 ft. of 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire 6 ft. of split loom tubing 1 Gold plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-29% sale

ALPINE S-A55V 440w RMS 5-Channel S-Series Car Audio Amplifier Class D+Amp Kit

00
DAYS 00
HRS 00
MIN 00
SEC

ALPINE S-A55V 440w RMS 5-Channel S-Series Car Audio Amplifier Class D+Amp Kit $499.95 $700.00

Alpine S-A55V S-Series 5-Channel Class D Amplifier 540W RMS +Absolute 4 Gauge Amp Kit The Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers. S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. General Features: 5-channel Class D Amplifier Power Output: 40 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms 60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms 120 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms CTA-2006 compliant Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section Variable low-pass filter (50-400 Hz, 24 dB/octave) on a subchannel Variable bass boost (0-12 dB at 50 Hz) on a subchannel Optional RUX-KNOB.2 wired remote level control for a subchannel Preamp and speaker-level inputs speaker wire to RCA adapter required for speaker-level input Wiring and hardware not included with amplifier 4-gauge power and ground leads recommended Fuse rating: 30A x 2 Dimensions: 11-1/4" W x 2-1/4" H x 8" D Authorized Dealer 1-year Manufacturer's Warranty What's in the box: 5-Channel amplifier Two 30-amp ATO fuses (installed) Four 3/4" Screws 2mm Allen wrench Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Alpine S-A55V owner's manual Absolute KIT4OR Complete PRO Marine Auto Car RV 4 Gauge 2000 Watts Amplifier Complete Installation Amp Kit Power Wiring with Orange Accent Color Scheme Installing a car amplifier is already enough of a job without having to worry about where to find the right wire and installation accessories. What you might not know is that there are some gimmicks being played by some companies and you could end up getting ripped off! Today, I would recommend KIT4 for all DIY and Installer. This is a wiring kit with an easy-to-install AGU fuse holder and some seriously good wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels and works great, and it is much better than the typical 18 AWG wire most kits would include. General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provide optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of 4 AWG high current power cable 3 ft. of 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire 6 ft. of split loom tubing 1 Gold plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-17% sale

Alpine S-A55V 540W RMS Car Amplifier S-Series 5-Channel Class D Amplifier

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S-A55V 540W RMS Car Amplifier S-Series 5-Channel Class D Amplifier $499.95 $600.00

Alpine S-A55V S-Series 5-Channel Class D Amplifier 540W RMS The Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers. S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. General Features: 5-channel Class D Amplifier Power Output: 40 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms 60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms 120 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms CTA-2006 compliant Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section Variable low-pass filter (50-400 Hz, 24 dB/octave) on a subchannel Variable bass boost (0-12 dB at 50 Hz) on a subchannel Optional RUX-KNOB.2 wired remote level control for a subchannel Preamp and speaker-level inputs speaker wire to RCA adapter required for speaker-level input Wiring and hardware not included with amplifier 4-gauge power and ground leads recommended Fuse rating: 30A x 2 Dimensions: 11-1/4" W x 2-1/4" H x 8" D Authorized Dealer 1-year Manufacturer's Warranty What's in the box: 5-Channel amplifier Two 30-amp ATO fuses (installed) Four 3/4" Screws 2mm Allen wrench Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Alpine S-A55V owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-17% sale

Alpine S-A55V Car Amplifier<br/>S-Series 5-Channel Class D Amplifier 540W RMS

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S-A55V Car Amplifier
S-Series 5-Channel Class D Amplifier 540W RMS $499.95 $600.00

Alpine S-A55V S-Series 5-Channel Class D Amplifier 540W RMS The Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers. S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. General Features: 5-channel Class D Amplifier Power Output: 40 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms 60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms 120 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms CTA-2006 compliant Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section Variable low-pass filter (50-400 Hz, 24 dB/octave) on a subchannel Variable bass boost (0-12 dB at 50 Hz) on a subchannel Optional RUX-KNOB.2 wired remote level control for a subchannel Preamp and speaker-level inputs speaker wire to RCA adapter required for speaker-level input Wiring and hardware not included with amplifier 4-gauge power and ground leads recommended Fuse rating: 30A x 2 Dimensions: 11-1/4" W x 2-1/4" H x 8" D Authorized Dealer 1-year Manufacturer's Warranty What's in the box: 5-Channel amplifier Two 30-amp ATO fuses (installed) Four 3/4" Screws 2mm Allen wrench Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Alpine S-A55V owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-17% sale

Alpine S-A55V S-Series 5ch Amp - 60 Watts x 4 @ 2-Ohms & 300 Watts x 1 @ 2-Ohms

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S-A55V S-Series 5ch Amp - 60 Watts x 4 @ 2-Ohms & 300 Watts x 1 @ 2-Ohms $499.95 $600.00

Alpine S-A55V S-Series 5-Channel Class D Amplifier 540W RMS The Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers. S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. General Features: 5-channel Class D Amplifier Power Output: 40 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms 60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms 120 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms CTA-2006 compliant Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section Variable low-pass filter (50-400 Hz, 24 dB/octave) on a subchannel Variable bass boost (0-12 dB at 50 Hz) on a subchannel Optional RUX-KNOB.2 wired remote level control for a subchannel Preamp and speaker-level inputs speaker wire to RCA adapter required for speaker-level input Wiring and hardware not included with amplifier 4-gauge power and ground leads recommended Fuse rating: 30A x 2 Dimensions: 11-1/4" W x 2-1/4" H x 8" D Authorized Dealer 1-year Manufacturer's Warranty What's in the box: 5-Channel amplifier Two 30-amp ATO fuses (installed) Four 3/4" Screws 2mm Allen wrench Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Alpine S-A55V owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-32% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S-A60M 500W V-Power Series Class D Monoblock Digital Amplifier + Absolute KIT4 4 Gauge Complete Amplifier Kit $239.95 $349.95

Alpine S-A60M 500W V-Power Series Class D Monoblock Digital Amplifier + Absolute KIT4 4 Gauge Complete Amplifier Kit Born Tough, Raised Strong Tens of thousands have relied on V-Power amplifiers for dependable, quality power. Now in their fourth generation, V-Power amplifiers carry on this heritage and prove that playing strong never looked or sounded better. Yes, it is possible to improve upon a good thing. General Features: V-Power Series Class D Monoblock Digital Amplifier RMS Power Rating: 4 ohms: 300 watts x 1 Chan. 2 ohms: 500 watts x 1 Chan. Max power output: 500 watts x 1 Chan. Integrated wire and mounting screw terminals S.T.A.R. circuitry LED power (blue) and protect (red) indicators Variable Bass Boost (0 to +12 dB bass boost at 50 Hz) Optional Alpine RUX-KNOB.2 remote bass knob available Soft start turn-on 4 or 2 channel operation 4-channel speaker-level inputs Pre-amp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: 0.4V - 10V Non-fading pre-amp output Variable low-pass filter (50-400 Hz, 24 dB/octave) CEA-2006 compliant amplifier Dimensions: 7-7/8"W x 7-7/8"L x 2-3/16"H Authorized Dealer 1-year Manufacturer's Warranty Absolute KIT-4 Complete 4 Gauge Amplifier Kit Product Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provides optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Package Includes: 17 ft. of red 4 AWG high current power cable 3 ft. of black 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire 6 ft. of split loom tubing 1 Gold plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge)

-36% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S-A60M 500W V-Power Series Class D Monoblock Digital Amplifier + Absolute KIT4 4 Gauge Complete Amplifier Kit $239.95 $369.95

Alpine S-A60M 500W V-Power Series Class D Monoblock Digital Amplifier + Absolute KIT4 4 Gauge Complete Amplifier Kit Born Tough, Raised Strong Tens of thousands have relied on V-Power amplifiers for dependable, quality power. Now in their fourth generation, V-Power amplifiers carry on this heritage and prove that playing strong never looked or sounded better. Yes, it is possible to improve upon a good thing. General Features: V-Power Series Class D Monoblock Digital Amplifier RMS Power Rating: 4 ohms: 300 watts x 1 Chan. 2 ohms: 500 watts x 1 Chan. Max power output: 500 watts x 1 Chan. Integrated wire and mounting screw terminals S.T.A.R. circuitry LED power (blue) and protect (red) indicators Variable Bass Boost (0 to +12 dB bass boost at 50 Hz) Optional Alpine RUX-KNOB.2 remote bass knob available Soft start turn-on 4 or 2 channel operation 4-channel speaker-level inputs Pre-amp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: 0.4V - 10V Non-fading pre-amp output Variable low-pass filter (50-400 Hz, 24 dB/octave) CEA-2006 compliant amplifier Dimensions: 7-7/8"W x 7-7/8"L x 2-3/16"H Authorized Dealer 1-year Manufacturer's Warranty Absolute KIT-4 Complete 4 Gauge Amplifier Kit Product Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provides optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Package Includes: 17 ft. of red 4 AWG high current power cable 3 ft. of black 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire 6 ft. of split loom tubing 1 Gold plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge)

7% sale

Alpine S-A60M 600W S-Series Monoblock Class-D Amplifier

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S-A60M 600W S-Series Monoblock Class-D Amplifier $299.95 $280.00

Alpine S-A60M S-Series Monoblock Class-D Amplifier 600W RMSThe Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers.S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.General Features: Alpine S-Series Mono Power Amplifier - S-A60M RMS Power Output: 400W x 1 @ 4 Ohms (14.4V < 1% THD+N) 600W x 1 @ 2 Ohms (14.4V < 1% THD+N) S/N ratio: >85dB (ref: 1W into 4 ohms), >105dB (ref: rated power into 4 ohms) Remote bass knob compatible (requires RUX-KNOB.2, sold separately) CTA-2006 compliant THD+N ≤ 0.03% (ref 1W info 4 ohm) Frequency Response: 10HZ-400Hz (+/- 3 dB) Damping Factor: > 1000 variable low-pass filter (50-400 Hz, 24 dB/octave) variable bass boost (0-12 dB at 50 Hz) Speaker-level inputs (Speaker Wire to RCA Adapter Required) Preamp Inputs Improved heat sink and protection circuit design that eliminates thermal shut-down for dependable music playback Remote Sensing automatic turn-on when using speaker-level inputs Approximate Weight: 11 lbs Fuse Rating: fuse rating: 30A x 2 Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select from our website when purchased together with this amplifier. Dimensions: 8” W x 8” H x 2.25” D Authorized Dealer 1-year Manufacturer's Warranty What's in the S-A60M package: S-A60M owner's manual Mono subwoofer amplifier Two 30-amp ATO fuses (installed) Four 3/4" Screws 2mm Allen wrench Owner's manual Alpine Verification Certificate Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-39% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S-DB8V-TRK Halo Series 8" ported dual subwoofer enclosure with two 8" S-Series subwoofers $679.95 $1,100.00

Alpine S-DB8V-TRK Halo Series 8" ported dual subwoofer enclosure with two 8" S-Series subwoofers Great looks and great soundAlpine Authorized Online DealerWhen you have a great truck, you want more than a run-of-the-mill subwoofer system – you want great looks and great sound. Alpine's S-DB8V-TRK loaded sub enclosure offers the sound and style you've been looking for in a package that fits neatly under your seat while giving you the solid bass you want. The sound that means businessThe S-DB8V-TRK handles up to 600 watts of RMS power, so you'll get plenty of punch from its two S-W8D2 8" subs. The subs feature Alpine's Kevlar-reinforced pulp cone and rubber High Amplitude Multi-Roll (HAMR) surround for tough performance. The enclosure is wired for a 2-ohm load, making amplifier selection simple. The enclosure's side-firing ports load the cabin interior to boost the lows, for deeper bass at higher volume levels. Adaptable enclosureThe rugged 5/8" MDF enclosure is clothed in black carpet covering that combines toughness and good looks, with a central metal Pro-Link™ bracket that lets you adjust the enclosure's total width from 40" to 51" to fit under the seat of most full-sized crew cab trucks, or in the cargo area of the Jeep Wrangler JK and JL. An integrated amplifier mounting tray is optimized for Alpine's mono sub amps, and its EZ Change twist-lock grille system gives you speaker protection options to coordinate with your truck's interior. Adjustable mounting feet ensure a secure fit.Product highlights: 8" ported dual subwoofer enclosure Pro-Link design allows width adjustment for secure fit loaded with two Alpine S-W8D2 subwoofers Kevlar-reinforced pulp cone with Santoprene rubber surround power handling: 600 watts RMS frequency response: 34-200 Hz 2-ohm impedance sensitivity: 84 dB dimensions: 51" W (max)/40" W (min) x 8.63" H x 14" D warranty: 1 year Our 60-day money-back guarantee MFR # S-DB8V-TRKWhat's in the box: S-DB8V-TRK owner's manual Driver side enclosure Passenger side enclosure Front link bracket (installed on the back of the front cover) Rear link bracket Front cover w/ attached trim bars 2 Amp tray brackets 6 Stacking feet (installed on enclosures) 2 Extra foot spacers 2 Extra rubber feet 4mm Allen key 3mm Allen key Installation manual Warranty & registration information ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Find anything you need

Products (15464)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER