Products – Page 364 – absoluteusa

Alpine S2-A60M Monoblock 600 Watts Class-D Amplifier + 4 Gauge Amp Kit $299.95 $399.95

Alpine S2-A60M 1-Channel 600 Watts S-Series Monoblock Class-D Amplifier + Absolute KIT4OR 4 Gauge Complete Amplifier Kit Package Includes: 1 Alpine S2-A60M, 1 Absolute KIT4 Amplifier Kit 4 Gauge Alpine S2-A60M 1-Channel 600 Watts S-Series Monoblock Class-D Amplifier General Features: Alpine S-Series Mono Power Amplifier - S2-A60M 400W x 1 @ 4 Ohms RMS Power Output 600W x 1 @ 2 Ohms RMS Power Output S/N ratio: >85dB (ref: 1W into 4 ohms), >105dB (ref: rated power into 4 ohms) Remote bass knob compatible (requires RUX-KNOB.2, sold separately) CTA-2006 compliant THD+N ≤ 0.03% (ref 1W info 4 ohm) Frequency Response: 10HZ-400Hz (+/- 3 dB) Damping Factor: > 1000 variable low-pass filter (50-400 Hz, 24 dB/octave) variable bass boost (0-12 dB at 50 Hz) Speaker-level inputs (Speaker Wire to RCA Adapter Required) Preamp Inputs Improved heat sink and protection circuit design that eliminates thermal shut-down for dependable music playback Remote Sensing automatic turn-on when using speaker-level inputs Approximate Weight: 11 lbs Fuse Rating: fuse rating: 30A x 2 Dimensions: 8” W x 8” H x 2.25” D Authorized Internet Dealer 1-year Manufacturer's Warranty Absolute KIT4OR Complete PRO Marine Auto Car RV 4 Gauge 2000 Watts Amplifier Complete Installation Amp Kit Power Wiring with Orange Accent Color Scheme Today, I would recommend KIT4 for all DIY and installers. This wiring kit has an easy-to-install AGU fuse holder and some perfect wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels and works great and is much better than the typical 18 AWG wire most kits would include. General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provide optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of 4 AWG high current power cable Three ft. of 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire Six ft. of split loom tubing 1 Gold-plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-11% sale

Alpine S2-A60M S-Series Class D 600 W Mono Subwoofer Amplifier

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S2-A60M S-Series Class D 600 W Mono Subwoofer Amplifier $269.95 $299.95

Alpine S2-A60M Next Generation S-Series Hi Res Class D 600 W Mono Subwoofer Amplifier Alpine's S-Series S2-A60M 600W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 600W at a 1ohm or 2ohm drive, this mono amp can drive even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications. Plus, its compact design makes it easy to install in any vehicle. General Features: Class D 2 ohms Stable Monoblock Amplifier RMS Power Rating @ 4 ohms: 330 watts x 1 channel RMS Power Rating @ 2 ohms: 600 watts x 1 channel Pulse Width Modulated MOSFET power supply LED Power/Protect Light Optional remote bass level control available for purchase Alpine RUX-KNOB.2 Soft start turn-on Improved heat sink and protection circuit design Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Frequency Response: 10 - 400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 85 dB Variable low-pass filter: 50 - 400 Hz Variable Bass Boost: 0 - 12 dB Fuse Rating: 30A x 2 Dimensions: 8-1/16" W x 9-3/16" L x 2-5/16" H Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S2-A60M package: S2-A60M owner's manual Mono subwoofer amplifier 2 End caps Four 3/4" screws Four 1/4" screws 2mm Allen key Owner's manual Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-10% sale

Alpine S2-A60M S-Series Class D 600 W Mono Subwoofer Amplifier + 0 Gauge Amp Kit

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S2-A60M S-Series Class D 600 W Mono Subwoofer Amplifier + 0 Gauge Amp Kit $279.95 $309.95

Alpine S2-A60M Next Generation S-Series Hi Res Class D 600 W Mono Subwoofer Amplifier + Absolute KIT0 0 Gauge Amp Kit Alpine's S-Series S2-A60M 600W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 600W at a 1ohm or 2ohm drive, this mono amp can drive even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications. Plus, its compact design makes it easy to install in any vehicle. General Features: Class D 2 ohms Stable Monoblock Amplifier RMS Power Rating @ 4 ohms: 330 watts x 1 channel RMS Power Rating @ 2 ohms: 600 watts x 1 channel Pulse Width Modulated MOSFET power supply LED Power/Protect Light Optional remote bass level control available for purchase Alpine RUX-KNOB.2 Soft start turn-on Improved heat sink and protection circuit design Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Frequency Response: 10 - 400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 85 dB Variable low-pass filter: 50 - 400 Hz Variable Bass Boost: 0 - 12 dB Fuse Rating: 30A x 2 Dimensions: 8-1/16" W x 9-3/16" L x 2-5/16" H Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S2-A60M PACKAGE: S2-A60M owner's manual Mono subwoofer amplifier 2 End caps Four 3/4" screws Four 1/4" screws 2mm Allen key Owner's manual Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-11% sale

Alpine S2-A60M S-Series Class D 600 W Mono Subwoofer Amplifier + 4 Gauge Amp Kit

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S2-A60M S-Series Class D 600 W Mono Subwoofer Amplifier + 4 Gauge Amp Kit $269.95 $299.95

Alpine S2-A60M Next Generation S-Series Hi Res Class D 600 W Mono Subwoofer Amplifier + Absolute KIT4 4 Gauge Amp Kit Alpine's S-Series S2-A60M 600W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 600W at a 1ohm or 2ohm drive, this mono amp can drive even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications. Plus, its compact design makes it easy to install in any vehicle. General Features: Class D 2 ohms Stable Monoblock Amplifier RMS Power Rating @ 4 ohms: 330 watts x 1 channel RMS Power Rating @ 2 ohms: 600 watts x 1 channel Pulse Width Modulated MOSFET power supply LED Power/Protect Light Optional remote bass level control available for purchase Alpine RUX-KNOB.2 Soft start turn-on Improved heat sink and protection circuit design Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Frequency Response: 10 - 400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 85 dB Variable low-pass filter: 50 - 400 Hz Variable Bass Boost: 0 - 12 dB Fuse Rating: 30A x 2 Dimensions: 8-1/16" W x 9-3/16" L x 2-5/16" H Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S2-A60M PACKAGE: S2-A60M owner's manual Mono subwoofer amplifier 2 End caps Four 3/4" screws Four 1/4" screws 2mm Allen key Owner's manual Alpine Verification Certificate Warranty information Power supply note Online product registration information ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-8% sale

Alpine S2-A60M S-Series Class D 600 W Mono Subwoofer Amplifier + RUX-H01 Halo Bass Knob

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S2-A60M S-Series Class D 600 W Mono Subwoofer Amplifier + RUX-H01 Halo Bass Knob $349.90 $379.90

Alpine S2-A60M Next Generation S-Series Hi Res Class D 600 W Mono Subwoofer Amplifier + Alpine RUX-H01 Halo Bass Knob Remote Bass Level Control Alpine's S-Series S2-A60M 600W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 600W at a 1ohm or 2ohm drive, this mono amp can drive even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications. Plus, its compact design makes it easy to install in any vehicle. General Features: Class D 2 ohms Stable Monoblock Amplifier RMS Power Rating @ 4 ohms: 330 watts x 1 channel RMS Power Rating @ 2 ohms: 600 watts x 1 channel Pulse Width Modulated MOSFET power supply LED Power/Protect Light Optional remote bass level control available for purchase Alpine RUX-KNOB.2 Soft start turn-on Improved heat sink and protection circuit design Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Frequency Response: 10 - 400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 85 dB Variable low-pass filter: 50 - 400 Hz Variable Bass Boost: 0 - 12 dB Fuse Rating: 30A x 2 Dimensions: 8-1/16" W x 9-3/16" L x 2-5/16" H Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S2-A60M PACKAGE: S2-A60M owner's manual Mono subwoofer amplifier 2 End caps Four 3/4" screws Four 1/4" screws 2mm Allen key Owner's manual Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-9% sale

Alpine S2-A60M S-Series Class D 600 W Mono Subwoofer Amplifier + RUX-KNOB.2 Remote Bass Level Control

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S2-A60M S-Series Class D 600 W Mono Subwoofer Amplifier + RUX-KNOB.2 Remote Bass Level Control $319.90 $349.90

Alpine S2-A60M Next Generation S-Series Hi Res Class D 600 W Mono Subwoofer Amplifier + Alpine RUX-KNOB.2 Remote Bass Level Control Alpine's S-Series S2-A60M 600W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 600W at a 1ohm or 2ohm drive, this mono amp can drive even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications. Plus, its compact design makes it easy to install in any vehicle. General Features: Class D 2 ohms Stable Monoblock Amplifier RMS Power Rating @ 4 ohms: 330 watts x 1 channel RMS Power Rating @ 2 ohms: 600 watts x 1 channel Pulse Width Modulated MOSFET power supply LED Power/Protect Light Optional remote bass level control available for purchase Alpine RUX-KNOB.2 Soft start turn-on Improved heat sink and protection circuit design Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Frequency Response: 10 - 400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 85 dB Variable low-pass filter: 50 - 400 Hz Variable Bass Boost: 0 - 12 dB Fuse Rating: 30A x 2 Dimensions: 8-1/16" W x 9-3/16" L x 2-5/16" H Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S2-A60M PACKAGE: S2-A60M owner's manual Mono subwoofer amplifier 2 End caps Four 3/4" screws Four 1/4" screws 2mm Allen key Owner's manual Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-11% sale

Alpine S2-A60M S-Series Class-D Mono Subwoofer Amplifier 600W RMS at 1 & 2-Ohm

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S2-A60M S-Series Class-D Mono Subwoofer Amplifier 600W RMS at 1 & 2-Ohm $269.95 $299.95

Alpine S2-A60M Next Generation S-Series Hi-Res Class D 600 W Mono Subwoofer Amplifier Alpine's S-Series S2-A60M 600W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 600W at 1-ohm or 2-ohm impedance, this mono amplifier can drive even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications. Plus, its compact design makes it easy to install in any vehicle. General Features: Class D 2 ohms Stable Monoblock Amplifier RMS Power Rating @ 4 ohms: 330 watts x 1 channel RMS Power Rating @ 2 ohms: 600 watts x 1 channel Pulse Width Modulated MOSFET power supply LED Power/Protect Light Optional remote bass level control available for purchase, Alpine RUX-KNOB.2 Soft start turn-on Improved heat sink and protection circuit design Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Frequency Response: 10 - 400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 85 dB Variable low-pass filter: 50 - 400 Hz Variable Bass Boost: 0 - 12 dB Fuse Rating: 30A x 2 Dimensions: 8-1/16" W x 9-3/16" L x 2-5/16" H Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S2-A60M PACKAGE: S2-A60M owner's manual Mono subwoofer amplifier 2 End caps Four 3/4" screws Four 1/4" screws 2mm Allen key Owner's manual Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-22% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S2-S40 4" Coaxial 2-Way Car Speaker Pair $109.95 $139.99

Alpine S2-S40 4" Coaxial 2-Way, 280-Watt Type-S Series Coaxial Car Audio Speakers Bundle This bundle contains two Alpine S2-S40 4" Coaxial 2-Way Speaker Set.Alpine sounds are tailor-made for easy factory speaker placement.Introducing the Type-S speaker lineup with multiple size options that fit almost any vehicle. This is the way to go if you want to add incredible-sounding Alpine speakers to your system. This latest offering from the famous Type-S speakers is a best-bet upgrade and is still budget-friendly.OverviewGreat-sounding speaker upgrades at a competitive price.Perfect for OEM upgrades, with many sizes to suit almost any vehicle.New cosmetics that look good in your car and fit easily in stock speaker locations.Improve your vehicle's output and sound quality with these highly efficient speaker choices.High-efficiency design runs efficiently off of factory or built-in head unit power. General Features: 4" Type-S Series Car Speakers Power Handling: Peak: 280 watts per set / 140 watts on each side RMS: 90 watts per set / 45 watts on each side Tuned poly-mica cone woofer Butyl rubber surround for natural response and stability 3/4" Wide-Range Silk dome tweeter Optimized air-flow design Progressive Aramid Fiber Spider with optimized shape for deep bass and linearity HD Polymer frame Affordable premium quality upgrade to your factory audio system FEA-optimized motor structure 4" x 6" Mounting adapters included Great power-efficient speakers Swivel-mount tweeter 4 ohms impedance Square-wire short voice coil The new cone design allows for faster energy transfer & clarity Aramid-reinforced TIL bobbin holds voice coil wire very rigid High-grade network components Neodymium tweeter magnet structure Low-distortion strontium woofer magnet Top-mount depth: 1-21/32" Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-22% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S2-S40 4" Coaxial 2-Way, 280-Watt Type-S Series Coaxial Car Audio Speakers $109.95 $139.99

Alpine S2-S40 4" Coaxial 2-Way, 280-Watt Type-S Series Coaxial Car Audio Speakers Bundle This bundle contains two Alpine S2-S40 4" Coaxial 2-Way Speaker Set.Alpine sounds are tailor-made for easy factory speaker placement.Introducing the Type-S speaker lineup, with multiple size options to fit almost any vehicle. This is the way to go if you want to add incredible-sounding Alpine speakers to your system. This latest offering from the popular Type-S speakers is a best-bet upgrade and is still budget-friendly.OverviewGreat-sounding speaker upgrades at a competitive price.Perfect for OEM upgrades, with many sizes to suit almost any vehicle.New cosmetics that look good in your car and fit easily in stock speaker locations.Improve your vehicle's output and sound quality with these highly efficient speaker choices.High-efficiency design runs easily off of factory or built-in head unit power. General Features: 4" 2-way Coaxial Car Speakers Peak Power Handling: 280 watts per pair / 140 watts each RMS Power Handling: 90 watts per pair / 45 watts each Polypropylene cone material Rubber speaker surround High Amplitude Multi-Roll (HAMR) surround HI-RES Certified 3/4" Silk Dome Tweeters Ferrite magnet motor structure Top-mount Depth: 1-3/4" Cutout Dimensions: 3-11/16" Impedance: 4 ohms Frequency Response: 90 - 40000 Hz Sensitivity: 86 dB Authorized Internet Dealer MFR #: S2-S40 1-year Manufacturer's Warranty Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-41% sale

Alpine S2-S40C - Next-Generation S-Series 4

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S2-S40C - Next-Generation S-Series 4" Component Speaker Set $149.95 $249.95

Alpine S2-S40C - Next-Generation S-Series 4" Component Speaker Set Reliable Performance: Experience clean and accurate audio with the S2-S40C speakers. Crafted with a unique combination of polypropylene, Glass Fiber, and Mica Cone materials, these speakers are designed for lightweight construction, high output, and low distortion. Enjoy a superior audio experience with clear and precise sound reproduction. HAMR Surround Technology: The Alpine-exclusive High Amplitude Multi-Roll (HAMR) surround technology integrated into the speaker design allows maximum cone movement. This technology enables the S2-S40C speakers to deliver robust and accurate bass notes, immersing you in deep, impactful sound. Versatile Component Design: The S2-S40C speakers feature a 4 " woofer and 1" tweeters with threaded removable housing. With a maximum peak power of 140W and a maximum RMS power of 45W, these component speakers offer dynamic and versatile audio performance. OEM Fitment and In-Line Crossovers: Enjoy seamless integration into your vehicle's audio system with the S2-S40C speakers' OEM fitment design. The included in-line crossovers ensure optimized sound separation and distribution between the woofer and tweeter, resulting in a balanced and immersive listening experience. Upgrade your car's audio system easily and enjoy high-quality sound that complements your vehicle's interior. General Features:: 2-way component speaker system 4" polypropylene/glass fiber/mica woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing in-line crossovers for easier installation handles up to 45 watts RMS (140 watts peak power) sensitivity: 86 dB frequency range: 97-40,000 Hz warranty: 1 year What's in the box: Alpine S2-S40C owner's manual 2 Woofers Two 4x6 Adapter brackets 2 Tweeters (each has a 29" length of wire attached) 2 Flush mount housings (with tweeters installed) 2 Tweeter grilles (fixed) Two 37" Tweeter wires with in-line crossovers (each has quick slides on both ends) 2 Flush mount retention rings 2 Stealth brackets 2 Flat mounting flanges (used in some factory applications) 2 Foam self-adhesive pads 2 Foam self-adhesive rings Ten 3/4" Screws Ten 5/16" Screws Ten 1/4" Screws 10 Speed clips 10 Spacers 2 Adhesive-gaskets Warranty information Online product registration information Important Notice sheet Declaration of conformity Templates and specs on the box Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-41% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S2-S40C 4" 4x6" 140W Component Speakers In-Line Crossovers SIlk Tweeters $149.95 $249.95

Alpine S2-S40C - Next-Generation S-Series 4" Component Speaker Set Reliable Performance: Experience clean and accurate audio with the S2-S40C speakers. Crafted with a unique combination of polypropylene, Glass Fiber, and Mica Cone materials, these speakers are designed for lightweight construction, high output, and low distortion. Enjoy a superior audio experience with clear and precise sound reproduction. HAMR Surround Technology: The Alpine-exclusive High Amplitude Multi-Roll (HAMR) surround technology integrated into the speaker design allows maximum cone movement. This technology enables the S2-S40C speakers to deliver robust and accurate bass notes, immersing you in deep, impactful sound. Versatile Component Design: The S2-S40C speakers feature a 4 " woofer and 1" tweeters with threaded removable housing. These component speakers offer dynamic and versatile audio performance with a maximum peak power of 140W and a maximum RMS power of 45W. OEM Fitment and In-Line Crossovers: Enjoy seamless integration into your vehicle's audio system with the S2-S40C speakers' OEM fitment design. The included in-line crossovers ensure optimized sound separation and distribution between the woofer and tweeter, resulting in a balanced and immersive listening experience. Upgrade your car's audio system easily and enjoy high-quality sound that complements your vehicle's interior. General Features:: 2-way component speaker system 4" polypropylene/glass fiber/mica woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing in-line crossovers for easier installation handles up to 45 watts RMS (140 watts peak power) sensitivity: 86 dB frequency range: 97-40,000 Hz warranty: 1 year Dimensions: 15 x 7.5 x 5 inches Weight: 4.08 Pounds What's in the box: Alpine S2-S40C owner's manual 2 Woofers Two 4x6 Adapter brackets 2 Tweeters (each has a 29" length of wire attached) 2 Flush mount housings (with tweeters installed) 2 Tweeter grilles (fixed) Two 37" Tweeter wires with in-line crossovers (each has quick slides on both ends) 2 Flush mount retention rings 2 Stealth brackets 2 Flat mounting flanges (used in some factory applications) 2 Foam self-adhesive pads 2 Foam self-adhesive rings Ten 3/4" Screws Ten 5/16" Screws Ten 1/4" Screws 10 Speed clips 10 Spacers 2 Adhesive-gaskets Warranty information Online product registration information Important Notice sheet Declaration of conformity Templates and specs on the box Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-8% sale

Alpine S2-S50 - Next-Generation S-Series 5.25

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine S2-S50 - Next-Generation S-Series 5.25" Coaxial Speaker Set $129.95 $139.95

Alpine S2-S50 - Next-Generation S-Series 5.25" Coaxial Speaker Set Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S50 5” Coaxial Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers resulting in a more accurate and natural sound at an entry-level price point. Crafted with a unique combination of Poly Propylene, Glass Fiber, and Mica Cone materials, the S2-S50 is designed for lightweight construction, high output, and low distortion, giving you a clean and accurate audio experience. General Features: 5-1/4" 2-way Coaxial Car Speakers Peak Power Handling: 340 watts per pair / 170 watts each RMS Power Handling: 110 watts per pair / 55 watts each Polypropylene cone material Rubber speaker surround High Amplitude Multi-Roll surround technology HI-RES Certified 3/4" Silk Dome Tweeters Ferrite magnet motor structure Top-mount Depth: 2" Cutout Dimensions: 4.5" Impedance: 4 ohms Frequency Response: 80 - 22000 Hz Sensitivity: 87 dB Authorized Internet Dealer MFR #: S2-S50 1-year Manufacturer's Warranty What's in the S2-S50 package: Alpine S2-S50 owner's manual Two 2-way speakers Two 12" Lengths of speaker wire Warranty information Online product registration information Important Notice sheet Declaration of conformity Template and specs on box Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Find anything you need

Products (13179)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER