Products – Page 359 – absoluteusa

Alpine Pair of R-SB12V Pre-Loaded 12" Subwoofer Enclosures KTX-H12 Linking kit $1,599.85 $2,000.00

Alpine Pair of R-SB12V Pre-Loaded R-Series 12-inch Subwoofer Enclosures, with KTX-H12 Linking kit (2) Alpine R-SB12V Loaded 12" 750W R-W12D4 Subwoofers Ported Sub Enclosure Box + KTX-H12 Linking kit Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall excellent sound quality. The 10-inch enclosure is tuned to 36 Hz while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features: Includes R-W12D4 wired in parallel 750W RMS power handling 2 Ohm Impedance Ported Enclosure Design Frequency Response: 24-200Hz Vent Tuning Frequency: 35Hz Dimensions: 17" W x 14.625" H x 15" D Authorized Dealer 1-year Warranty Alpine KTX-H12 Linking Kit When it comes to bass, two is always better than one. Alpine's KTX-H12 linking kit allows you to connect two Alpine S-SB12V or R-SB12V 12" subwoofer enclosures to double your bass. The kit includes heavy-duty steel front and rear linking brackets to securely connect the enclosures, as well as all the hardware you'll need. The front bracket's silver finish is made to coordinate with the enclosures' design, while the silver Alpine badge adds a touch of style. Warranty: 1 year. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

5% sale

Alpine PSS-22WRA Direct-fit complete speaker Fit 2011-18 Jeep Wrangler JK Unlimited

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine PSS-22WRA Direct-fit complete speaker Fit 2011-18 Jeep Wrangler JK Unlimited $1,995.95 $1,900.00

Alpine PSS-22WRA Compatible Fit Jeep Wrangler JK Unlimited Weather-Resistant Upgrade SPV-65X-WRA x 2, KTA-30F-WRA, KTA-30M-WRA, SBV-10-WRA Good times in your Wrangler Unlimited are about to get better. Alpine's Restyle PSS-22WRA speaker system takes the guesswork out of installation with nine direct-fit speakers and power sources ideally suited for your Jeep Wrangler JK Unlimited (not compatible with premium sound systems). Alpine has also designed this weather-proof system to endure the environmental harshness of life in your Jeep, even when the top is off. Get ready to rock the great outdoors.The soundAlpine supplies everything you need to revitalize the sound in your Wrangler. You'll get two 6-1/2" component systems with 1" dome tweeters for the front and soundbar locations in your Jeep. Alpine lets you convert these components to a coaxial design if called for in your JK Unlimited. The included weather-resistant Tough Pack 4-channel amp ups your power for astonishing clarity at all volumes — a must for top-down drivers. Alpine also gives you a 10" enclosed under-seat subwoofer and a Tough Pack mono amp for some whoppin' bass. The fitAlpine designed the Restyle line for drivers who want to improve their sound but want to maintain the factory look of their vehicle. The PSS-22WRA sound system upholds this approach by including tweeter mounting gear suitable for a variety of locations. The woofers fit directly into your factory locations, and in the case of the two amps, all wiring is included, complete with factory-compatible plugs. Once the PSS-22WRA system goes in, you won't even know it's there... until you crank up the volume.READ LESSProduct highlights:Compatible with select 2011-18 Jeep Wrangler JK Unlimited models (not compatible with premium sound systems)package includes:two sets of SPV-65X-WRA 6-1/2" component speakersweather-resistant Tough Pack KTA-30F-WRA 4-channel amplifierweather-resistant Tough Pack KTA-30M-WRA mono amplifier with the remote bass knobSBV-10-WRA 10" enclosed submounting gear, wiring, and connectors included, SPV-65X-WRA speakers can be configured for component or coaxial use General Features: Alpine PSS-22WRA Audio Restyle for Jeep Wrangler Unlimited JK Includes speakers, tweeters, a powered subwoofer, and two amplifiers Fully Waterproof Plug-and-Play Package Specifically designed for 2007-2018 four-door Jeep Wrangler Unlimited Vehicles Authorized Internet Dealer compatible with select 2011-18 Jeep Wrangler JK Unlimited models (not compatible with premium sound systems) package includes: two sets of SPV-65X-WRA 6-1/2" component speakers weather-resistant Tough Pack KTA-30F-WRA 4-channel amplifier weather-resistant Tough Pack KTA-30M-WRA mono amplifier with the remote bass knob SBV-10-WRA 10" enclosed sub mounting gear, wiring, and connectors Included SPV-65X-WRA speakers can be configured for component or coaxial use What's in the box: SPV-65X-WRA x 2, KTA-30F-WRA, KTA-30M-WRA, SBV-10-WRA Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-17% sale

Alpine PSS-22WRA Fit Jeep Wrangler JK Unlimited Weather Resistant System Upgrade

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine PSS-22WRA Fit Jeep Wrangler JK Unlimited Weather Resistant System Upgrade $1,995.95 $2,400.00

Alpine PSS-22WRA Compatible Fit Jeep Wrangler JK Unlimited Weather-Resistant Upgrade SPV-65X-WRA x 2, KTA-30F-WRA, KTA-30M-WRA, SBV-10-WRA Good times in your Wrangler Unlimited are about to get better. Alpine's Restyle PSS-22WRA speaker system takes the guesswork out of installation with nine direct-fit speakers and power sources ideally suited for your Jeep Wrangler JK Unlimited (not compatible with premium sound systems). Alpine has also designed this weather-proof system to endure the environmental harshness of life in your Jeep, even when the top is off. Get ready to rock the great outdoors.The soundAlpine supplies everything you need to revitalize the sound in your Wrangler. You'll get two 6-1/2" component systems with 1" dome tweeters for the front and soundbar locations in your Jeep. Alpine lets you convert these components to a coaxial design if called for in your JK Unlimited. The included weather-resistant Tough Pack 4-channel amp ups your power for astonishing clarity at all volumes — a must for top-down drivers. Alpine also gives you a 10" enclosed under-seat subwoofer and a Tough Pack mono amp for some whoppin' bass. The fitAlpine designed the Restyle line for drivers who want to improve their sound but want to maintain the factory look of their vehicle. The PSS-22WRA sound system upholds this approach by including tweeter mounting gear suitable for a variety of locations. The woofers fit directly into your factory locations, and in the case of the two amps, all wiring is included, complete with factory-compatible plugs. Once the PSS-22WRA system goes in, you won't even know it's there... until you crank up the volume.READ LESSProduct highlights:Compatible with select 2011-18 Jeep Wrangler JK Unlimited models (not compatible with premium sound systems)package includes:two sets of SPV-65X-WRA 6-1/2" component speakersweather-resistant Tough Pack KTA-30F-WRA 4-channel amplifierweather-resistant Tough Pack KTA-30M-WRA mono amplifier with the remote bass knobSBV-10-WRA 10" enclosed submounting gear, wiring, and connectors included, SPV-65X-WRA speakers can be configured for component or coaxial use General Features: Alpine PSS-22WRA Audio Restyle for Jeep Wrangler Unlimited JK Includes speakers, tweeters, a powered subwoofer, and two amplifiers Fully Waterproof Plug-and-Play Package Specifically designed for 2007-2018 four-door Jeep Wrangler Unlimited Vehicles Authorized Internet Dealer compatible with select 2011-18 Jeep Wrangler JK Unlimited models (not compatible with premium sound systems) package includes: two sets of SPV-65X-WRA 6-1/2" component speakers weather-resistant Tough Pack KTA-30F-WRA 4-channel amplifier weather-resistant Tough Pack KTA-30M-WRA mono amplifier with the remote bass knob SBV-10-WRA 10" enclosed sub mounting gear, wiring, and connectors Included SPV-65X-WRA speakers can be configured for component or coaxial use What's in the box: SPV-65X-WRA x 2, KTA-30F-WRA, KTA-30M-WRA, SBV-10-WRA Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

5% sale

Alpine PSS-22WRA Fit Jeep Wrangler JK Unlimited Weather Resistant Upgrade

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine PSS-22WRA Fit Jeep Wrangler JK Unlimited Weather Resistant Upgrade $1,995.95 $1,900.00

Alpine PSS-22WRA Compatible Fit Jeep Wrangler JK Unlimited Weather-Resistant Upgrade SPV-65X-WRA x 2, KTA-30F-WRA, KTA-30M-WRA, SBV-10-WRA Good times in your Wrangler Unlimited are about to get better. Alpine's Restyle PSS-22WRA speaker system takes the guesswork out of installation with nine direct-fit speakers and power sources ideally suited for your Jeep Wrangler JK Unlimited (not compatible with premium sound systems). Alpine has also designed this weather-proof system to endure the environmental harshness of life in your Jeep, even when the top is off. Get ready to rock the great outdoors.The soundAlpine supplies everything you need to revitalize the sound in your Wrangler. You'll get two 6-1/2" component systems with 1" dome tweeters for the front and soundbar locations in your Jeep. Alpine lets you convert these components to a coaxial design if called for in your JK Unlimited. The included weather-resistant Tough Pack 4-channel amp ups your power for astonishing clarity at all volumes — a must for top-down drivers. Alpine also gives you a 10" enclosed under-seat subwoofer and a Tough Pack mono amp for some whoppin' bass. The fitAlpine designed the Restyle line for drivers who want to improve their sound but want to maintain the factory look of their vehicle. The PSS-22WRA sound system upholds this approach by including tweeter mounting gear suitable for a variety of locations. The woofers fit directly into your factory locations, and in the case of the two amps, all wiring is included, complete with factory-compatible plugs. Once the PSS-22WRA system goes in, you won't even know it's there... until you crank up the volume.READ LESSProduct highlights:Compatible with select 2011-18 Jeep Wrangler JK Unlimited models (not compatible with premium sound systems)package includes:two sets of SPV-65X-WRA 6-1/2" component speakersweather-resistant Tough Pack KTA-30F-WRA 4-channel amplifierweather-resistant Tough Pack KTA-30M-WRA mono amplifier with the remote bass knobSBV-10-WRA 10" enclosed submounting gear, wiring, and connectors included, SPV-65X-WRA speakers can be configured for component or coaxial use General Features: Alpine PSS-22WRA Audio Restyle for Jeep Wrangler Unlimited JK Includes speakers, tweeters, a powered subwoofer, and two amplifiers Fully Waterproof Plug-and-Play Package Specifically designed for 2007-2018 four-door Jeep Wrangler Unlimited Vehicles Authorized Internet Dealer compatible with select 2011-18 Jeep Wrangler JK Unlimited models (not compatible with premium sound systems) package includes: two sets of SPV-65X-WRA 6-1/2" component speakers weather-resistant Tough Pack KTA-30F-WRA 4-channel amplifier weather-resistant Tough Pack KTA-30M-WRA mono amplifier with the remote bass knob SBV-10-WRA 10" enclosed sub mounting gear, wiring, and connectors Included SPV-65X-WRA speakers can be configured for component or coaxial use What's in the box: SPV-65X-WRA x 2, KTA-30F-WRA, KTA-30M-WRA, SBV-10-WRA Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

5% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine PSS-22WRA Jeep Wrangler JK Unlimited Weather Resistant Upgrade $1,995.95 $1,900.00

Alpine PSS-22WRA Compatible Fit Jeep Wrangler JK Unlimited Weather-Resistant Upgrade SPV-65X-WRA x 2, KTA-30F-WRA, KTA-30M-WRA, SBV-10-WRA Good times in your Wrangler Unlimited are about to get better. Alpine's Restyle PSS-22WRA speaker system takes the guesswork out of installation with nine direct-fit speakers and power sources ideally suited for your Jeep Wrangler JK Unlimited (not compatible with premium sound systems). Alpine has also designed this weather-proof system to endure the environmental harshness of life in your Jeep, even when the top is off. Get ready to rock the great outdoors.The soundAlpine supplies everything you need to revitalize the sound in your Wrangler. You'll get two 6-1/2" component systems with 1" dome tweeters for the front and soundbar locations in your Jeep. Alpine lets you convert these components to a coaxial design if called for in your JK Unlimited. The included weather-resistant Tough Pack 4-channel amp ups your power for astonishing clarity at all volumes — a must for top-down drivers. Alpine also gives you a 10" enclosed under-seat subwoofer and a Tough Pack mono amp for some whoppin' bass. The fitAlpine designed the Restyle line for drivers who want to improve their sound but want to maintain the factory look of their vehicle. The PSS-22WRA sound system upholds this approach by including tweeter mounting gear suitable for a variety of locations. The woofers fit directly into your factory locations, and in the case of the two amps, all wiring is included, complete with factory-compatible plugs. Once the PSS-22WRA system goes in, you won't even know it's there... until you crank up the volume.READ LESSProduct highlights:Compatible with select 2011-18 Jeep Wrangler JK Unlimited models (not compatible with premium sound systems)package includes:two sets of SPV-65X-WRA 6-1/2" component speakersweather-resistant Tough Pack KTA-30F-WRA 4-channel amplifierweather-resistant Tough Pack KTA-30M-WRA mono amplifier with the remote bass knobSBV-10-WRA 10" enclosed submounting gear, wiring, and connectors included, SPV-65X-WRA speakers can be configured for component or coaxial use General Features: Alpine PSS-22WRA Audio Restyle for Jeep Wrangler Unlimited JK Includes speakers, tweeters, a powered subwoofer, and two amplifiers Fully Waterproof Plug-and-Play Package Specifically designed for 2007-2018 four-door Jeep Wrangler Unlimited Vehicles Authorized Internet Dealer compatible with select 2011-18 Jeep Wrangler JK Unlimited models (not compatible with premium sound systems) package includes: two sets of SPV-65X-WRA 6-1/2" component speakers weather-resistant Tough Pack KTA-30F-WRA 4-channel amplifier weather-resistant Tough Pack KTA-30M-WRA mono amplifier with the remote bass knob SBV-10-WRA 10" enclosed sub mounting gear, wiring, and connectors Included SPV-65X-WRA speakers can be configured for component or coaxial use What's in the box: SPV-65X-WRA x 2, KTA-30F-WRA, KTA-30M-WRA, SBV-10-WRA Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -16% sale

Alpine PSS-23WRA Powered Subwoofer Sound System 2018- Up Jeep Wrangler Unlimited

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine PSS-23WRA Powered Subwoofer Sound System 2018- Up Jeep Wrangler Unlimited $1,699.95 $2,000.00

Alpine PSS-23WRA Powered Sound System Upgrade for 2018 - Up Jeep Wrangler Unlimited Powered System Upgrade for 2018-Up Jeep® Wrangler Unlimited JL TAKE YOUR WRANGLER’S SOUND BEYOND THE FACTORYEnjoy premium sound quality even with your JL’s top-off! The PSS-23WRA is a 300-watt system upgrade featuring a powered subwoofer, amplifier, and tweeters for the 2018-Up Jeep Wrangler Unlimited JL without the factory amplified system. The PSS-23WRA provides excellent sound performance whether the JL’s top is on or off.SOUND THAT WILL TURN HEADS WITH THE TOP ON OR OFFThe PWE-S8 subwoofer is engineered to load and disperse lower-frequency sound into the passenger’s footwell area to maximize bass extension throughout the Jeep for great sound with the top on or off. The subwoofer includes a remote bass knob so you can control the bass level from the convenience of your dashboard. The included 4-channel amplifier more than doubles the power over the factory system, allowing you to enjoy your tunes with the top off. EASY BOLT-IN INSTALLATIONThe PWE-S8 Powered Subwoofer and KTP-445U Power Pack Amplifier don’t take up much space since they mount under the passenger’s seat. The two products come pre-connected for easy bolt-in installation with simple wire routing. Mounting brackets for the products are included as well.SIMPLE TWEETER REPLACEMENTThe SPR-10TW Component Tweeters replace the factory tweeters on the top of the dash. These high-performance tweeters add much-needed high-frequency response that is lacking in the factory Jeep JL systems. An EQ Ring improves the tweeter’s dispersion characteristics and delivers a wide, flat frequency response.WORKS WITH ANY RADIOThe included T-harness gets the necessary audio signal connections from behind the Wrangler’s radio, making installation a breeze. The PSS-23WRA is compatible with Alpine universal head units, the factory Jeep base radio, or other aftermarket radios. General Features: Complete Direct Fit Audio System Upgrade Compatible with 2018-Up Jeep Wrangler Unlimited JL Compatible with models that don't have a factory-amplified system All installation hardware, such as speaker adapters and amplifier wiring, is included CEA-2006 Compliant System 300 Watt RMS sound system The system consists of: 8" Powered Subwoofer Universal Power Pack Amplifier 2" Component Tweeters Tweeter Adapters Authorized Dealer 1-year Manufacturer's Warranty PWE-S8 Subwoofer Features: Peak: 240 watts RMS: 120 watts 8" woofer high-excursion cone built-in Class D amplifier frequency response: 32-150 Hz variable low-pass crossover (80-200 Hz) variable phase control (0-180 degrees) preamp- and speaker-level inputs Dimensions: 13-1/2"W x 3"D x 9"H KTP-445U Amplifier Features: RMS Power Rating: 4 ohms: 45 watts x 4 Channel 2 ohms: 45 watts x 4 Channel 4 ohms: 90 watts x 2 Channel (Bridged) Total RMS power output: 180 watts CEA-2006 compliant amplifier Increases the output of any head unit without having to install a full-size amplifier and amp install kit The Independent front/Rear gain switch is adjustable from high to low Runs off the receiver's power circuit High-Pass Filter: selectable 60/80/120 Hz @ 12 dB/octave Fast and simple installation 4-channel operation for four speakers Minimum impedance of 2 ohms Frequency response: 20-20,000 Hz Fuse Rating: 15A x 1 SPR-10TW Component Tweeters: 2" Type-R Series Car Tweeters Power Handling: Peak: 450 watts per pair / 225 watts each RMS: 150 watts per pair / 75 watts each Silk Dome tweeter construction 4 ohms impedance Copper-Clad Aluminum high-temperature voice coil 75% smaller external crossover filter removes harmful frequencies 4-way tweeter level attenuation High-grade Neodymium magnet structure Surface / Bottom / Flush Mountable CEA-2031 compliant speakers Sensitivity: 88dB Frequency response: 1,000-29,000 Hz Top-mount depth: 11/16" Vehicle Compatibility: JEEP 2018 - Up Wrangler Unlimited JL Compatible with Wrangler JL Models that don't have a factory amplified system What's in the PSS-23WRA package: KTP-445U amplifier PWE-S8 powered subwoofer (both pre-attached to vehicle mounting bracket) 7' Signal harness 12' Loomed power wire w/ inline 20A fuse 52-Pin t-harness Four 10" speaker to RCA harnesses Two SPR-10TW tweeters w/ integrated mounting plates and 8" wire loom w/ inline crossovers Remote bass-level control w/ attached 16' cable 3" Strip of hook-and-loop fastener Ten 6" wire-ties 1/2" Self-tapping screw Star-washer 2 Alpine logos Installation guide Warranty sheet Alpine PSS-23WRA owner's manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-6% sale

Alpine PSS-23WRA Powered Upgrade 18-Up Wrangler Unlimited JL

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine PSS-23WRA Powered Upgrade 18-Up Wrangler Unlimited JL $1,699.95 $1,800.00

Alpine PSS-23WRA Powered Sound System Upgrade for 2018 - Up Jeep Wrangler Unlimited Powered System Upgrade for 2018-Up Jeep® Wrangler Unlimited JL TAKE YOUR WRANGLER’S SOUND BEYOND THE FACTORYEnjoy premium sound quality even with your JL’s top-off! The PSS-23WRA is a 300-watt powered system upgrade featuring a powered subwoofer, amplifier, and tweeters for the 2018-Up Jeep Wrangler Unlimited JL without the factory amplified system. The PSS-23WRA provides excellent sound performance whether the JL’s top is on or off.SOUND THAT WILL TURN HEADS WITH THE TOP ON OR OFFThe PWE-S8 subwoofer is engineered to load and disperse lower-frequency sound into the passenger’s footwell area to maximize bass extension throughout the Jeep for great sound with the top on or off. Included with the subwoofer is a remote bass knob so you can control the bass level from the convenience of your dashboard. The Included 4-channel amplifier more than doubles the power over the factory system allowing you to enjoy your tunes with the top off. EASY BOLT-IN INSTALLATIONThe PWE-S8 Powered Subwoofer and KTP-445U Power Pack Amplifier don’t take up much since they mount under the passenger’s seat. The two products come pre-connected for easy bolt-in installation with simple wire routing. Mounting brackets for the products are included as well.SIMPLE TWEETER REPLACEMENTThe SPR-10TW Component Tweeters replace the factory tweeters on the top of the dash. These high-performance tweeters add much-needed high-frequency response that is lacking in the factory Jeep JL systems. An EQ Ring improves the tweeter’s dispersion characteristics and delivers a wide, flat frequency response.WORKS WITH ANY RADIOThe included T-harness gets the necessary audio signal connections from behind the Wrangler’s radio, making installation a breeze. The PSS-23WRA is compatible with Alpine universal head units, the factory Jeep base radio, or other aftermarket radios. General Features: Complete Direct Fit Audio System Upgrade Compatible with 2018 - Up Jeep Wrangler Unlimited JL Compatible with models that don't have a factory-amplified system All installation hardware, such as speaker adapters and amplifier wiring, included CEA-2006 Compliant System 300 Watt RMS sound system The system consists of: 8" Powered Subwoofer Universal Power Pack Amplifier 2" Component Tweeters Tweeter Adapters Authorized Dealer 1-year Manufacturer's Warranty PWE-S8 Subwoofer Features: Peak: 240 watts RMS: 120 watts 8" woofer high-excursion cone built-in Class D amplifier frequency response: 32-150 Hz variable low-pass crossover (80-200 Hz) variable phase control (0-180 degrees) preamp- and speaker-level inputs Dimensions: 13-1/2"W x 3"D x 9"H KTP-445U Amplifier Features: RMS Power Rating: 4 ohms: 45 watts x 4 Channel 2 ohms: 45 watts x 4 Channel 4 ohms: 90 watts x 2 Channel (Bridged) Total RMS power output: 180 watts CEA-2006 compliant amplifier Increases the output of any head unit without having to install a full-size amplifier and amp install kit The Independent front/Rear gain switch is adjustable from high to low Runs off the receiver's power circuit High-Pass Filter: selectable 60/80/120 Hz @ 12 dB/octave Fast and simple installation 4-channel operation for four speakers Minimum impedance of 2 ohms Frequency response: 20-20,000 Hz Fuse Rating: 15A x 1 SPR-10TW Component Tweeters: 2" Type-R Series Car Tweeters Power Handling: Peak: 450 watts per pair / 225 watts each RMS: 150 watts per pair / 75 watts each Silk Dome tweeter construction 4 ohms impedance Copper-Clad Aluminum high-temperature voice coil 75% smaller external crossover filter removes harmful frequencies 4-way tweeter level attenuation High-grade Neodymium magnet structure Surface / Bottom / Flush Mountable CEA-2031 compliant speakers Sensitivity: 88dB Frequency response: 1,000-29,000 Hz Top-mount depth: 11/16" Vehicle Compatibility: JEEP 2018 - Up Wrangler Unlimited JL Compatible with Wrangler JL Models that don't have a factory amplified system What's in the box: KTP-445U amplifier PWE-S8 powered subwoofer (both pre-attached to vehicle mounting bracket) 7' Signal harness 12' Loomed power wire w/ inline 20A fuse 52-Pin t-harness Four 10" speaker to RCA harnesses Two SPR-10TW tweeters w/ integrated mounting plates and 8" wire loom w/ inline crossovers Remote bass-level control w/ attached 16' cable 3" Strip of hook-and-loop fastener Ten 6" wire-ties 1/2" Self-tapping screw Star-washer 2 Alpine logos Installation guide Warranty sheet Alpine PSS-23WRA owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-6% sale

Alpine PSS-23WRA Sub, Amp and Tweeters Audio System for 2018-Up Jeep Wrangler JL

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine PSS-23WRA Sub, Amp and Tweeters Audio System for 2018-Up Jeep Wrangler JL $1,699.95 $1,800.00

Alpine PSS-23WRA Powered Sound System Upgrade for 2018 - Up Jeep Wrangler Unlimited Powered System Upgrade for 2018-Up Jeep® Wrangler Unlimited JL TAKE YOUR WRANGLER’S SOUND BEYOND THE FACTORYEnjoy premium sound quality even with your JL’s top-off! The PSS-23WRA is a 300-watt powered system upgrade featuring a powered subwoofer, amplifier, and tweeters for the 2018-Up Jeep Wrangler Unlimited JL without the factory amplified system. The PSS-23WRA provides excellent sound performance whether the JL’s top is on or off.SOUND THAT WILL TURN HEADS WITH THE TOP ON OR OFFThe PWE-S8 subwoofer is engineered to load and disperse lower-frequency sound into the passenger’s footwell area to maximize bass extension throughout the Jeep for great sound with the top on or off. Included with the subwoofer is a remote bass knob so you can control the bass level from the convenience of your dashboard. The Included 4-channel amplifier more than doubles the power over the factory system allowing you to enjoy your tunes with the top off. EASY BOLT-IN INSTALLATIONThe PWE-S8 Powered Subwoofer and KTP-445U Power Pack Amplifier don’t take up much since they mount under the passenger’s seat. The two products come pre-connected for easy bolt-in installation with simple wire routing. Mounting brackets for the products are included as well.SIMPLE TWEETER REPLACEMENTThe SPR-10TW Component Tweeters replace the factory tweeters on the top of the dash. These high-performance tweeters add much-needed high-frequency response that is lacking in the factory Jeep JL systems. An EQ Ring improves the tweeter’s dispersion characteristics and delivers a wide, flat frequency response.WORKS WITH ANY RADIOThe included T-harness gets the necessary audio signal connections from behind the Wrangler’s radio, making installation a breeze. The PSS-23WRA is compatible with Alpine universal head units, the factory Jeep base radio, or other aftermarket radios. General Features: Complete Direct Fit Audio System Upgrade Compatible with 2018 - Up Jeep Wrangler Unlimited JL Compatible with models that don't have a factory-amplified system All installation hardware, such as speaker adapters and amplifier wiring, included CEA-2006 Compliant System 300 Watt RMS sound system The system consists of: 8" Powered Subwoofer Universal Power Pack Amplifier 2" Component Tweeters Tweeter Adapters Authorized Dealer 1-year Manufacturer's Warranty PWE-S8 Subwoofer Features: Peak: 240 watts RMS: 120 watts 8" woofer high-excursion cone built-in Class D amplifier frequency response: 32-150 Hz variable low-pass crossover (80-200 Hz) variable phase control (0-180 degrees) preamp- and speaker-level inputs Dimensions: 13-1/2"W x 3"D x 9"H KTP-445U Amplifier Features: RMS Power Rating: 4 ohms: 45 watts x 4 Channel 2 ohms: 45 watts x 4 Channel 4 ohms: 90 watts x 2 Channel (Bridged) Total RMS power output: 180 watts CEA-2006 compliant amplifier Increases the output of any head unit without having to install a full-size amplifier and amp install kit The Independent front/Rear gain switch is adjustable from high to low Runs off the receiver's power circuit High-Pass Filter: selectable 60/80/120 Hz @ 12 dB/octave Fast and simple installation 4-channel operation for four speakers Minimum impedance of 2 ohms Frequency response: 20-20,000 Hz Fuse Rating: 15A x 1 SPR-10TW Component Tweeters: 2" Type-R Series Car Tweeters Power Handling: Peak: 450 watts per pair / 225 watts each RMS: 150 watts per pair / 75 watts each Silk Dome tweeter construction 4 ohms impedance Copper-Clad Aluminum high-temperature voice coil 75% smaller external crossover filter removes harmful frequencies 4-way tweeter level attenuation High-grade Neodymium magnet structure Surface / Bottom / Flush Mountable CEA-2031 compliant speakers Sensitivity: 88dB Frequency response: 1,000-29,000 Hz Top-mount depth: 11/16" Vehicle Compatibility: JEEP 2018 - Up Wrangler Unlimited JL Compatible with Wrangler JL Models that don't have a factory amplified system What's in the box: KTP-445U amplifier PWE-S8 powered subwoofer (both pre-attached to vehicle mounting bracket) 7' Signal harness 12' Loomed power wire w/ inline 20A fuse 52-Pin t-harness Four 10" speaker to RCA harnesses Two SPR-10TW tweeters w/ integrated mounting plates and 8" wire loom w/ inline crossovers Remote bass-level control w/ attached 16' cable 3" Strip of hook-and-loop fastener Ten 6" wire-ties 1/2" Self-tapping screw Star-washer 2 Alpine logos Installation guide Warranty sheet Alpine PSS-23WRA owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-18% sale

Alpine PSS-24WRA Complete Audio System for 18-Up Jeep Wrangler & 20-Up Gladiator

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine PSS-24WRA Complete Audio System for 18-Up Jeep Wrangler & 20-Up Gladiator $2,399.95 $2,900.00

Alpine PSS-24WRA Complete Audio System for 18-Up Jeep Wrangler & 20-Up Gladiator Compatible Vehicles: 2018 – UP JEEP WRANGLER, 4DR / NON-AMPLIFIED 2020 – UP JEEP GLADIATOR, NON-AMPLIFIED TOP-OFF SOUNDYour Jeep begs for top-off drives, whether cruising down the highway or weaving through trails, so you need a sound system that delivers music for all your adventures. The PSS-24WRA is a 300-Watt Complete Sound System Upgrade Package for the four-door, non-amplified 2018–Up Jeep Wrangler and non-amplified 2020–Up Jeep Gladiator.COMPLETE PACKAGEGo beyond your wildest expectations for sound with this complete sound upgrade package. The PSS-24WRA has five channels of powered sounds that replace your factory system. The package includes two sets of 6.5” weather-resistant mid-bass drivers and 1” weather-resistant tweeters that replace the front and rear soundbar factory speakers, an 8” powered, compact subwoofer, and a 4-channel power pack amplifier.TUNED FOR JEEP®The PSS-24WRA sound system is tuned for the unique cabin environment of the 2018-up Jeep Wrangler and 2020–up Jeep Gladiator. The weather-resistant speakers are designed for powerful, top-off performance unhindered by weather, wind, or other noise while driving. The 6.5” mid-bass drivers bring out the full potential of your sound, while the tweeters capture the high frequencies often lost in music reproduction. The 8” compact subwoofer adds deep, accurate bass that grounds your sound system.PLUG-AND-PLAY INSTALLATIONVehicle-specific speaker connectors and pods designed for the 2018-up Jeep Wrangler and 2020–up Jeep Gladiator are included for plug-and-play installation. Tweeter adapter plates use the original factory tweeter locations to remove the guesswork from installation. Vehicle-specific mounting brackets are included to secure the 8” compact subwoofer and 4-channel amplifier under the passenger seat without drilling.SYSTEM COMPATIBILITYThe PSS-24WRA is compatible with the i407-WRA-JL 7-Inch Multimedia Receiver and X409-WRA-JL 9-Inch Weather-Resistant Navigation System with Off-Road Mode. The PSS-24WRA also includes a vehicle-specific T-harness for installation with the factory radio into compatible four-door, non-amplified NEW 2018 – 2020 Jeep® Wrangler and non-amplified 2020 – Up Jeep® Gladiator. General Features: Complete, five-channel powered sound system upgrade package Compatible with four-door, non-amplified 2018 - Up Jeep Wrangler and non-amplified 2020 - Up Jeep Gladiator Also compatible with two-door, non-scissor front seats in 2019 - Up Jeep Wrangler Includes Alpine's SPV-65X-WRA, SPV-65-JLT, PWE-S8, and KTP-445U 180W, 4-channel Power Pack amplifier 120W, 8" powered subwoofer (2x) 6.5" weather-resistant mid-bass drivers (2x) 1" weather-resistant teteron dome tweeters with vehicle-specific connectors and crossovers Vehicle-specific front speaker pods with vehicle-specific connectors Tweeter adapter plates allow for the use of the original factory tweeter locations SPV-65-JLT weather-resistant rear soundbar speaker system Rugged, premium grills designed to emulate the factory look and appeal Vehicle-specific connectors for plug-and-play speaker installation  Utilizes factory bolt locations Durable stamped steel frame speaker basket design Includes a template for mounting Vehicle-specific T-harness for installation with OEM radio into compatible 2018 2018-Up Jeep Wrangler and 2020-Up Jeep Gladiator vehicles Vehicle-specific mounting brackets allow the powered sub and amp to be secured Front (SPV-65X-WRA): Power handling: 75 watts RMS (225 watts peak) Frequency response: 65kHz – 22kHz Nominal impedance: 4 ohms Weather-resistant: IP55 Rear (SPV-65-JLT): Power handling: 90 watts RMS (270 watts peak) Frequency response: 50kHz – 22kHz Nominal impedance: 4 ohms Weather-resistant: IP55 Powered Subwoofer (PWE-S8): 120 watts RMS (240 watts peak) Frequency response: 32 - 150Hz Variable low-pass crossover (80-200 Hz) Variable phase control (0-180 degrees) preamp- and speaker-level inputs Four Channel Power Pack Amplifier (KTP-445U): 45 watts RMS x 4 at 4 or 2 ohms 90 watts RMS x 2 bridged at 4 ohms Selectable high-pass filters (60, 80, or 120 Hz at 12 dB/octave) Switchable RCA or speaker-level inputs Dimensions: 27” L x 18.5” W x 19.5” H Weight: 40lbs Authorized Dealer 1-year Manufacturer's Warranty Note: Not compatible with the factory-equipped subwoofer system What's in the PSS-24WRA package: PSS-24WRA owner's manual This Alpine kit contains five individually packaged items: PWE-S8 Subwoofer KTP-445U Amplifier SPV-65X-WRA 6.5" Component Speakers SPV-65-JLT 6.5" 2-Way Speakers ALP-POD-JLTR Speaker Pods PSU-BKT-JL-R PWE Right Bracket JL PSU-BKT-JL-L PWE Left Bracket JL ALP-HRN-PSU300 PSU Power Harness ALP-THRN-CH2 Chrysler T-Harness CT6 6" Cable Ties PHPSM412 Pan Head Phillips Screw M4x12 SLWM4 M4 Split Lock Washers PHSCR832 8-32 Pan Head Phillips screws PSS-WRA-IM Installation Manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-18% sale

Alpine PSS-24WRA Direct-Fit Complete Speaker System For Jeep Wrangler/Gladiator

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine PSS-24WRA Direct-Fit Complete Speaker System For Jeep Wrangler/Gladiator $2,399.95 $2,900.00

Alpine PSS-24WRA Complete Audio System for 18-Up Jeep Wrangler & 20-Up Gladiator Compatible Vehicles: 2018 – UP JEEP® WRANGLER, 4DR / NON-AMPLIFIED 2020 – UP JEEP® GLADIATOR, NON-AMPLIFIED TOP-OFF SOUNDYour Jeep® begs for top-off drives, whether cruising down the highway or weaving through trails, so you need a sound system that delivers music for all your adventures. The PSS-24WRA is a 300-watt Complete Sound System Upgrade Package for the four-door, non-amplified 2018—Up Jeep® Wrangler and non-amplified 2020—Up Jeep® Gladiator.COMPLETE PACKAGEGo beyond your wildest expectations for sound with this complete sound upgrade package. The PSS-24WRA has 5-channels of powered sounds that replace your factory system. The package includes two sets of 6.5” weather-resistant mid-bass drivers and 1” weather-resistant tweeters that replace the front and rear soundbar factory speakers, an 8” powered, compact subwoofer, and a 4-channel power pack amplifier.TUNED FOR JEEP®The PSS-24WRA sound system is tuned for the unique cabin environment of the 2018-Up Jeep Wrangler and 2020–Up Jeep Gladiator. The weather-resistant speakers are designed for powerful, top-off performance unhindered by weather, wind, or other noise while driving. The 6.5” mid-bass drivers bring out the full potential of your sound, while the tweeters capture the high frequencies often lost in music reproduction. The 8” compact subwoofer adds deep, accurate bass that grounds your sound system.PLUG-AND-PLAY INSTALLATIONVehicle-specific speaker connectors and pods designed for the 2018-up Jeep Wrangler and 2020–up Jeep Gladiator are included for plug-and-play installation. Tweeter adapter plates use the original factory tweeter locations to remove the guesswork from installation. Vehicle-specific mounting brackets are included to secure the 8” compact subwoofer and 4-channel amplifier under the passenger seat without drilling.SYSTEM COMPATIBILITYThe PSS-24WRA is compatible with the i407-WRA-JL 7-Inch Multimedia Receiver and X409-WRA-JL 9-Inch Weather-Resistant Navigation System with Off-Road Mode. The PSS-24WRA also includes a vehicle-specific T-harness for installation with the factory radio into compatible four-door, non-amplified NEW 2018 – 2020 Jeep® Wrangler and non-amplified 2020 – Up Jeep® Gladiator. General Features: Complete, five-channel powered sound system upgrade package Compatible with four-door, non-amplified 2018 - Up Jeep Wrangler and non-amplified 2020 - Up Jeep Gladiator Also compatible with two-door, non-scissor front seats in 2019 - Up Jeep Wrangler Includes Alpine's SPV-65X-WRA, SPV-65-JLT, PWE-S8, and KTP-445U 180W, 4-channel Power Pack amplifier 120W, 8" powered subwoofer (2x) 6.5" weather-resistant mid-bass drivers (2x) 1" weather-resistant teteron dome tweeters with vehicle-specific connectors and crossovers Vehicle-specific front speaker pods with vehicle-specific connectors Tweeter adapter plates allow for the use of the original factory tweeter locations SPV-65-JLT weather-resistant rear soundbar speaker system Rugged, premium grills designed to emulate the factory look and appeal Vehicle-specific connectors for plug-and-play speaker installation  Utilizes factory bolt locations Durable stamped, steel frame speaker basket design Includes a template for mounting Vehicle-specific T-harness for installation with OEM radio into compatible 2018 2018-Up Jeep Wrangler and 2020-Up Jeep Gladiator vehicles Vehicle-specific mounting brackets allow the powered sub and amp to be secured Front (SPV-65X-WRA): Power handling: 75 watts RMS (225 watts peak) Frequency response: 65kHz – 22kHz Nominal impedance: 4 ohms Weather-resistant: IP55 Rear (SPV-65-JLT): Power handling: 90 watts RMS (270 watts peak) Frequency response: 50kHz – 22kHz Nominal impedance: 4 ohms Weather-resistant: IP55 Powered Subwoofer (PWE-S8): 120 watts RMS (240 watts peak) Frequency response: 32 - 150Hz Variable low-pass crossover (80-200 Hz) Variable phase control (0-180 degrees) preamp- and speaker-level inputs Four-Channel Power Pack Amplifier (KTP-445U): 45 watts RMS x 4 at 4 or 2 ohms 90 watts RMS x 2 bridged at 4 ohms Selectable high-pass filters (60, 80, or 120 Hz at 12 dB/octave) Switchable RCA or speaker-level inputs Dimensions: 27” L x 18.5” W x 19.5” H Weight: 40lbs Authorized Dealer 1-year Manufacturer's Warranty Note: Not compatible with the factory-equipped subwoofer system What's in the PSS-24WRA package: PSS-24WRA owner's manual This Alpine kit contains five individually packaged items: PWE-S8 Subwoofer KTP-445U Amplifier SPV-65X-WRA 6.5" Component Speakers SPV-65-JLT 6.5" 2-Way Speakers ALP-POD-JLTR Speaker Pods PSU-BKT-JL-R PWE Right Bracket JL PSU-BKT-JL-L PWE Left Bracket JL ALP-HRN-PSU300 PSU Power Harness ALP-THRN-CH2 Chrysler T-Harness CT6 6" Cable Ties PHPSM412 Pan Head Phillips Screw M4x12 SLWM4 M4 Split Lock Washers PHSCR832 8-32 Pan Head Phillips screws PSS-WRA-IM Installation Manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-17% sale

Alpine PSS-TSLA-213 11-Speaker Sound System Upgrade for the 2018-21 Tesla Model 3 with Factory Base Audio

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine PSS-TSLA-213 11-Speaker Sound System Upgrade for the 2018-21 Tesla Model 3 with Factory Base Audio $3,599.95 $4,320.00

Alpine PSS-TSLA-213 11-Speaker Sound System Upgrade for the 2018-21 Tesla Model 3 with Factory Base Audio Designed to Fit Model 3 -Designed specifically to fit 2018-21 Tesla Model 3 with Factory Base Audio, the PSS-TSLA-213 is a complete plug-and-play sound system that boasts the perfect combination of power and efficiency. Designed with the Tesla driver in mind, this system elevates the performance of your sound system while maintaining the integrity of your interior.Seamless Integration -Custom-designed for a stealth installation, this 11-speaker, complete sound system upgrade easily replaces the factory speakers with no cutting or modification required. A 10” sealed subwoofer is added in the rear trunk and provides a powerful boost of bass performance to the system.High-End Sound Performance -Crafted from a unique hybrid blue carbon fiber material and paired with a cutting-edge ultra-efficient amplifier, the Hi-Res Audio certified speakers redefine your Tesla experience with unparalelled high-end sound performance. Every note is delivered with precision and clarity, creating a captivating atmosphere that truly elevates your journey.General Features:• Tesla Model 3 Sound System with Hi-Res Audio Certified Speakers• Adds 10 Hi-Res Speakers, a 10" Sealed Subwoofer, and 12-Channel DSP/Amplifier• Direct-fit Installation in 2018-21 Tesla Model 3 with Factory Base Audio System• Replaces the Factory Tesla Speakers with No Cutting or Modification Required• Lightweight and Rigid Hybrid Blue Carbon Fiber Speaker Cone Material• Alpine Proprietary High Amplitude Multi-Roll Surround (HAMR Surround) Technology• Sound System Pre-Tuned and Optimized for the Tesla Cabin Environment• Ultra-efficient Amplifier (Uses 1 Mile of Range Per Hour at Full Volume)• Optimized for EV Low Voltage Battery Range (12V-16V)• Estimated Installation Time (2-3 Hours) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-17% sale

Alpine PSS-TSLA-213P 13-Speaker Sound System Upgrade for the 2018-21 Tesla Model 3 with Factory Premium Audio

00
DAYS 00
HRS 00
MIN 00
SEC

Alpine PSS-TSLA-213P 13-Speaker Sound System Upgrade for the 2018-21 Tesla Model 3 with Factory Premium Audio $3,599.95 $4,320.00

Alpine PSS-TSLA-213P 13-Speaker Sound System Upgrade for the 2018-21 Tesla Model 3 with Factory Premium Audio Unleash the full power and potential of your Tesla with Alpine's PSS-TSLA-213P complete sound system upgrade designed to fit Tesla Model 3.DESIGNED TO FIT MODEL 3Designed specifically to fit 2018-21 Tesla Model 3 with Factory Premium Audio, the PSS-TSLA-213P is a complete plug-and-play sound system that boasts the perfect combination of power and efficiency. Designed with the Tesla driver in mind, this system elevates the performance of your sound system while maintaining the integrity of your interior.General Features: Tesla Model 3 Sound System with Hi-Res Audio Certified Speakers Adds 12 Hi-Res Speakers, a 10" Sealed Subwoofer, and 12-Channel DSP/Amplifier Direct-fit Installation in 2018-21 Tesla Model 3 with Factory Premium Audio System Replaces the Factory Tesla Speakers with Little to No Cutting or Modification Required Lightweight and Rigid Hybrid Blue Carbon Fiber Speaker Cone Material Alpine Proprietary High Amplitude Multi-Roll Surround (HAMR Surround) Technology Sound System Pre-Tuned and Optimized for the Tesla Cabin Environment Ultra-efficient Amplifier (Uses 1 Mile of Range Per Hour at Full Volume) Optimized for EV Low Voltage Battery Range (12V-16V) WHAT'S INCLUDED:(2) 6.5” Midrange Component Front Door Speakers with 1” Tweeters(2) 4” Midrange Rear Door Speakers(2) 4” Midrange Rear Deck Speakers (some modification may be required to rear deck)(3) 4” Midrange Center Dash Speakers with 1” Center Dash Tweeter(1) 10” Sealed Subwoofer(1) 12-Channel Digital Sound Processor with Built-in 12-Channel Amplifier(1) Vehicle-Specific Harness for 2018-21 Tesla Model 3TECH SPECS: 10” Sealed Subwoofer (200W RMS) 12-Channel Amplifier/DSP (50W RMS x 6, 25W RMS x 4, 100W RMS x 2 or 200W RMS x 1 Bridged) 6.5" Midrange Component Front Door Speakers (50W RMS / 200W Peak) 4" Midrange Center Dash Speakers (40W RMS / 160W Peak) 4" Midrange Rear Door/Rear Deck Speakers (40W RMS / 160W Peak) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Find anything you need

Products (15418)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER