Products – Page 240 – absoluteusa

Absolute CAMPACK-700 7" LCD Rear View Mirror Monitor Car Monitor + IR Night Vision Car Camera Parking Assistance System Kit $89.99 $149.99

Absolute CAMPACK-700 7.0 Inches TFT/LCD Rear View Mirror Monitor with Rear View Night Vision Camera Absolute CAMPACK-700 7.0 Inches TFT/LCD Rear View Mirror Monitor with Rear View Night Vision Camera 7.0 Inches TFT LCD Rear view mirror Monitor with rearview Night vision camera Aspect Ratio 16:9 Wide Screen Output Standard PAL NTSC Video Input System AV1 AV2 Monitor Features: 1 Absolute MIR-73 7" TFT LCD Color Monitor/ Rear-View Mirror Rear-view Mirror with Monitor Built-in 7" TFT LCD Monitor Dual video inputs PAL/NTSC Compatible Resolution:480 x R.G.B. x 234 pixels Auto switching for color systems (PAL and NTSC) Requires a 12V DC power supply When powered off, the display becomes a full mirror OSD (On-Screen Display) menu for customization Includes a wireless remote control Dimensions: 9-7/8"W x 1"D x 4-1/2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Camera Features: 1 Absolute CAM-600 Wide Angle Rear View CMD Color Back UP Camera with Infrared Night Vision License Plate Mount Finish: Black color Universal rearview camera (reversed image) System: NTSC Designed for night vision applications (infrared LED) Camera built into the water-resistant case Waterproof: IP67- IP68 Resolution: 420 lines Scanning System: 2:1 Interlace Effective Pixel: 510x462 pixels Electronic Shutter: 1/60-1/15,000 sec. Minimum Illumination: 0.2Lux/F1.8 (0 lux with LED) Power Range: 10.5 -14.4 volts Video output:1.0Vp-p, 75 Ohms Lens: 2.8mm / 120 Degrees Angle View S/N ratio of more than 48 dB 120* Degree Wide viewing angle Video connection with RCA composite cable Requires power and ground for operation Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-41% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Absolute CAMPACK-700 7" TFT/LCD Rear View Mirror Monitor + Rear View Night Vision Camera $89.99 $149.99

Absolute CAMPACK-700 7.0 Inches TFT/LCD Rear View Mirror Monitor with Rear View Night Vision Camera Absolute CAMPACK-700 7.0 Inches TFT/LCD Rear View Mirror Monitor with Rear View Night Vision Camera 7.0 Inches TFT LCD Rear view mirror Monitor with rearview Night vision camera Aspect Ratio 16:9 Wide Screen Output Standard PAL NTSC Video Input System AV1 AV2 Monitor Features: 1 Absolute MIR-73 7" TFT LCD Color Monitor/ Rear-View Mirror Rear-view Mirror with Monitor Built-in 7" TFT LCD Monitor Dual video inputs PAL/NTSC Compatible Resolution:480 x R.G.B. x 234 pixels Auto switching for color systems (PAL and NTSC) Requires a 12V DC power supply When powered off, the display becomes a full mirror OSD (On-Screen Display) menu for customization Includes a wireless remote control Dimensions: 9-7/8"W x 1"D x 4-1/2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Camera Features: 1 Absolute CAM-600 Wide Angle Rear View CMD Color Back UP Camera with Infrared Night Vision License Plate Mount Finish: Black color Universal rearview camera (reversed image) System: NTSC Designed for night vision applications (infrared LED) Camera built into the water-resistant case Waterproof: IP67- IP68 Resolution: 420 lines Scanning System: 2:1 Interlace Effective Pixel: 510x462 pixels Electronic Shutter: 1/60-1/15,000 sec. Minimum Illumination: 0.2Lux/F1.8 (0 lux with LED) Power Range: 10.5 -14.4 volts Video output:1.0Vp-p, 75 Ohms Lens: 2.8mm / 120 Degrees Angle View S/N ratio of more than 48 dB 120* Degree Wide viewing angle Video connection with RCA composite cable Requires power and ground for operation Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-51% sale

Absolute CAMPACK36 3.5 Inches Slim TFT LCD Universal Mount Monitor with License Plate Mount Rearview Night Vision Backup Camera

00
DAYS 00
HRS 00
MIN 00
SEC

Absolute CAMPACK36 3.5 Inches Slim TFT LCD Universal Mount Monitor with License Plate Mount Rearview Night Vision Backup Camera $59.99 $119.99

Absolute CAMPACK-36 3.5 Inches Slim TFT LCD Universal Mount Monitor with License Plate Mount Rearview Night Vision Backup Camera This wired backup camera system includes a 3.5-inch monitor and a standard definition license plate camera. This is an economical solution for those who want a good-quality backup camera and a small screen that fits any vehicle. The camera itself is straightforward to install and powerful enough to be left on continuously while driving down the road or pop on when you go in reverse. The Camera is mounted to a bracket where the screw holes line up with the screw holes on the license plate. The camera comes with everything you need for installation and easy setup. General Features: Monitor Description: 3.5'' TFT LCD stand monitor Automatically switch when reversing 2 video inputs NTSC system Brightness: 250 cd/m Contrast: 200:1 Screen dim: 3-3/4" (W) x 3-5/8" (H) x 1-5/8" (L) Camera Description: Output Standard: PAL/NTSC Compatible High Resolution: 380TV lines x 60 fields Image Sensor: OV7910 color CMOS Lens: 6MM 92 degree Low Light Illumination: 1.5LUX/ F1.2 Video Output: RCA 1.0 VPP composite video @ 75OHM Power Supply: DC12V Temperature: -10~ 50 Celsius Unit Dimensions: 1.3"H x 8"W x 1.26"D Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-51% sale

Absolute CAMPACK400 4 Inches Slim TFT LCD Universal Mount Monitor with License Plate Mount Rearview Night Vision Backup Camera

00
DAYS 00
HRS 00
MIN 00
SEC

Absolute CAMPACK400 4 Inches Slim TFT LCD Universal Mount Monitor with License Plate Mount Rearview Night Vision Backup Camera $69.99 $139.99

Absolute CAMPACK-400 4 Inches Slim TFT LCD Universal Mount Monitor with License Plate Mount Rearview Night Vision Backup Camera This wired backup camera system includes a 4-inch monitor and a standard definition license plate camera. This is an economical solution for those who want a good-quality backup camera and a small screen that fits any vehicle. The camera is straightforward to install and powerful enough to be left on continuously while driving down the road or pop on when you go in reverse. The Camera is mounted to a bracket where the screw holes line up with the screw holes on the license plate. The camera comes with everything you need for installation and easy setup. General Features: Monitor Description: 4'' TFT LCD stand monitor Automatically switch when reversing 2 video inputs NTSC system Brightness: 250 cd/m Contrast: 200:1 Screen dim: 3-3/4" (W) x 3-5/8" (H) x 1-5/8" (L) Camera Description: Output Standard: PAL/NTSC Compatible High Resolution: 380TV lines x 60 fields Image Sensor: OV7910 color CMOS Lens: 6MM 92 degree Low Light Illumination: 1.5LUX/ F1.2 Video Output: RCA 1.0 VPP composite video @ 75OHM Power Supply: DC12V Temperature: -10~ 50 Celsius Unit Dimensions: 1.3"H x 8"W x 1.26"D Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-41% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Absolute CAMPACK700 7" Rear View Mirror Monitor with Rear View Night Vision Camera $89.99 $149.99

Absolute CAMPACK-700 7.0 Inches TFT/LCD Rear View Mirror Monitor with Rear View Night Vision Camera Absolute CAMPACK-700 7.0 Inches TFT/LCD Rear View Mirror Monitor with Rear View Night Vision Camera 7.0 Inches TFT LCD Rear view mirror Monitor with rearview Night vision camera Aspect Ratio 16:9 Wide Screen Output Standard PAL NTSC Video Input System AV1 AV2 Monitor Features: 1 Absolute MIR-73 7" TFT LCD Color Monitor/ Rear-View Mirror Rear-view Mirror with Monitor Built-in 7" TFT LCD Monitor Dual video inputs PAL/NTSC Compatible Resolution:480 x R.G.B. x 234 pixels Auto switching for color systems (PAL and NTSC) Requires a 12V DC power supply When powered off, the display becomes a full mirror OSD (On-Screen Display) menu for customization Includes a wireless remote control Dimensions: 9-7/8"W x 1"D x 4-1/2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Camera Features: 1 Absolute CAM-600 Wide Angle Rear View CMD Color Back UP Camera with Infrared Night Vision License Plate Mount Finish: Black color Universal rearview camera (reversed image) System: NTSC Designed for night vision applications (infrared LED) Camera built into the water-resistant case Waterproof: IP67- IP68 Resolution: 420 lines Scanning System: 2:1 Interlace Effective Pixel: 510x462 pixels Electronic Shutter: 1/60-1/15,000 sec. Minimum Illumination: 0.2Lux/F1.8 (0 lux with LED) Power Range: 10.5 -14.4 volts Video output:1.0Vp-p, 75 Ohms Lens: 2.8mm / 120 Degrees Angle View S/N ratio of more than 48 dB 120* Degree Wide viewing angle Video connection with RCA composite cable Requires power and ground for operation Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-41% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Absolute CAMPACK700 7" TFT LCD Color Monitor/ Rear-View Mirror w/ Camera $89.99 $149.99

Absolute CAMPACK-700 7.0 Inches TFT/LCD Rear View Mirror Monitor with Rear View Night Vision Camera Absolute CAMPACK-700 7.0 Inches TFT/LCD Rear View Mirror Monitor with Rear View Night Vision Camera 7.0 Inches TFT LCD Rear view mirror Monitor with rearview Night vision camera Aspect Ratio 16:9 Wide Screen Output Standard PAL NTSC Video Input System AV1 AV2 Monitor Features: 1 Absolute MIR-73 7" TFT LCD Color Monitor/ Rear-View Mirror Rear-view Mirror with Monitor Built-in 7" TFT LCD Monitor Dual video inputs PAL/NTSC Compatible Resolution:480 x R.G.B. x 234 pixels Auto switching for color systems (PAL and NTSC) Requires a 12V DC power supply When powered off, the display becomes a full mirror OSD (On-Screen Display) menu for customization Includes a wireless remote control Dimensions: 9-7/8"W x 1"D x 4-1/2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Camera Features: 1 Absolute CAM-600 Wide Angle Rear View CMD Color Back UP Camera with Infrared Night Vision License Plate Mount Finish: Black color Universal rearview camera (reversed image) System: NTSC Designed for night vision applications (infrared LED) Camera built into the water-resistant case Waterproof: IP67- IP68 Resolution: 420 lines Scanning System: 2:1 Interlace Effective Pixel: 510x462 pixels Electronic Shutter: 1/60-1/15,000 sec. Minimum Illumination: 0.2Lux/F1.8 (0 lux with LED) Power Range: 10.5 -14.4 volts Video output:1.0Vp-p, 75 Ohms Lens: 2.8mm / 120 Degrees Angle View S/N ratio of more than 48 dB 120* Degree Wide viewing angle Video connection with RCA composite cable Requires power and ground for operation Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -59% sale

ABSOLUTE CAP300B Capacitor<br/>3 Farad Blue Power Car Capacitor for Energy Storage to Enhance Bass Demand From Audio System

00
DAYS 00
HRS 00
MIN 00
SEC

ABSOLUTE CAP300B Capacitor
3 Farad Blue Power Car Capacitor for Energy Storage to Enhance Bass Demand From Audio System $49.99 $119.99

Absolute CAP300B 3 Farad Blue Power Car Capacitor for Energy Storage to Enhance Bass Demand From Audio System Car Audio Capacitor is Used to Prevent Dimming of Dash Lights and Headlights When Playing Loud Bass Notes. They Work by Supplying the Car Amplifier with Rapid Jolts of Power. A Car Audio Power Cap Works by Storing Large Amounts of Electrical Power Which It Can Then Deliver to Power Hungry Components When Called Upon to Do So. They Have an Advantage Over Typical Lead Acid Storage Batteries Because They Have Very Low Internal Resistance. This Allows Them to Deliver Large Amounts of Power (Current) Very Quickly. Much Faster Than A Car's Charging System Can Deliver That Same Amount of Current. Car Audio Power Amplifiers Can Have Very Large Current Demands. This Is Dependent on The Music Being Played Through the Amplifier. Typically, These Currents Are Only Needed in Short Bursts During Transient Peaks (Bass Drum Note, Etc.). If the Amplifier Tries to Pull This Current from The Electrical System Directly It May Cause A Drop in Voltage Called A Sag. This Sag Is Equivalent to A Voltage Drop in The System and The Size of The Drop Depends on The Resistance of The Wire from The Source (Battery) to the Amplifier. CHARGING THE CAPACITOR First, make sure that all the connections according to the diagrams in the instruction manual are correct. Pick up the cable coming from the POSITIVE (+) battery terminal. Place the supplied charging resistor between the end of this cable and the positive terminal of the capacitor. The capacitor will begin charging. Charging generally takes 5 to 60 seconds. During charging, the voltage shown in the 3 digit display will rise rapidly, then slow as it approaches the voltage of your vehicle’s battery. When fully charged, the display voltage will stop rising. If you have a voltmeter, you can first measure the voltage of your car battery. Then you will know with accuracy that the capacitor is fully charged. CAUTION!! During charging, the resistor will become hot. This is normal, but exercise caution during the charging process. After charging is complete, remove the resistor from the incoming positive cable, and IMMEDIATELY connect it to the positive terminal of the capacitor. General Features: 3 Farad Digital Capacitor With 3000 Watts Runs On 10-16 Volts DC Audible Warning Tone for Reverse Polarity, Voltage Overload, and Low Battery Voltage Capacitance: 3,000,000, Capacitance Tolerance: + / - 10%, Voltage Measurement Accurate To + / - 0.1 VDC Equivalent Series Resistance: 0.00195 Mw @ 120 Hz / 25°C You May Also Hook Up as Many as You Like in Parallel to Make a Bank of Power Stabilizing Amplifier Flow Capacity High Strength Cylindrical Aluminum Housing Soft Turn-On/Off Power Surge Bright Charging Status L.E.D. Digital Over-Voltage Protection System Perfect for Systems Up to 3000W Max Increases Level of Bass, And the Peak Power of Your Amp Features Audible Warning Indicators Runs On 10-16 Volts Dc Equipped with Automatic Shutoff Protection Accepts Any Gauge of Wire with Ring Terminals 3 Farad Digital Power Capacitor 24 Volts Surge Ultra-Low ESR (Super Low Internal Resistance ) 3 Digit Bright Red Digital Led Voltage Display Audible Warning Tone for Reverse Polarity, Voltage Overload, And Low Battery Voltage Capacitance: 3,000,000 Capacitance Tolerance: + / - 10%, Voltage Measurement Accurate To + / - 0.1 VDC Working Voltage: 10-16 VDC, Automatic Shutoff Protection Includes Clear Mounting Brackets Includes the Resistor for Charging Reduce or Stop the Dimming of Your Headlights Accepts any gauge of wire with ring terminals Width of Mounting Bracket Base: 5-1/2" Dimensions: 11-3/4"H X 3-1/2"W X 3-1/2"D 3 Year Warranty Equivalent Series Resistance: You May Also Hook Up as Many as You Like in Parallel to Make A Bank of Power. ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Sold out -59% sale

00
DAYS 00
HRS 00
MIN 00
SEC

ABSOLUTE CAP300R 3 FARAD POWER CAR CAPACITOR FOR ENERGY STORAGE TO ENHANCE BASS DEMAND FROM AUDIO SYSTEM (RED) $49.99 $119.99

Absolute CAP300R 3 Farad Red Power Car Capacitor for Energy Storage to Enhance Bass Demand From Audio System Car Audio Capacitor is Used to Prevent Dimming of Dash Lights and Headlights When Playing Loud Bass Notes. They Work by Supplying the Car Amplifier with Rapid Jolts of Power. A Car Audio Power Cap Works by Storing Large Amounts of Electrical Power Which It Can Then Deliver to Power Hungry Components When Called Upon to Do So. They Have an Advantage Over Typical Lead Acid Storage Batteries Because They Have Very Low Internal Resistance. This Allows Them to Deliver Large Amounts of Power (Current) Very Quickly. Much Faster Than A Car's Charging System Can Deliver That Same Amount of Current. Car Audio Power Amplifiers Can Have Very Large Current Demands. This Is Dependent on The Music Being Played Through the Amplifier. Typically, These Currents Are Only Needed in Short Bursts During Transient Peaks (Bass Drum Note, Etc.). If the Amplifier Tries to Pull This Current from The Electrical System Directly It May Cause A Drop in Voltage Called A Sag. This Sag Is Equivalent to A Voltage Drop in The System and The Size of The Drop Depends on The Resistance of The Wire from The Source (Battery) to the Amplifier. CHARGING THE CAPACITOR First, make sure that all the connections according to the diagrams in the instruction manual are correct. Pick up the cable coming from the POSITIVE (+) battery terminal. Place the supplied charging resistor between the end of this cable and the positive terminal of the capacitor. The capacitor will begin charging. Charging generally takes 5 to 60 seconds. During charging, the voltage shown in the 3 digit display will rise rapidly, then slow as it approaches the voltage of your vehicle’s battery. When fully charged, the display voltage will stop rising. If you have a voltmeter, you can first measure the voltage of your car battery. Then you will know with accuracy that the capacitor is fully charged. CAUTION!! During charging, the resistor will become hot. This is normal, but exercise caution during the charging process. After charging is complete, remove the resistor from the incoming positive cable, and IMMEDIATELY connect it to the positive terminal of the capacitor. General Features: 3 Farad Digital Capacitor With 3000 Watts Runs On 10-16 Volts DC Audible Warning Tone for Reverse Polarity, Voltage Overload, and Low Battery Voltage Capacitance: 3,000,000, Capacitance Tolerance: + / - 10%, Voltage Measurement Accurate To + / - 0.1 VDC Equivalent Series Resistance: 0.00195 Mw @ 120 Hz / 25°C You May Also Hook Up as Many as You Like in Parallel to Make a Bank of Power Stabilizing Amplifier Flow Capacity High Strength Cylindrical Aluminum Housing Soft Turn-On/Off Power Surge Bright Charging Status L.E.D. Digital Over-Voltage Protection System Perfect for Systems Up to 3000W Max Increases Level of Bass, And the Peak Power of Your Amp Features Audible Warning Indicators Runs On 10-16 Volts Dc Equipped with Automatic Shutoff Protection Accepts Any Gauge of Wire with Ring Terminals 3 Farad Digital Power Capacitor 24 Volts Surge Ultra-Low ESR (Super Low Internal Resistance ) 3 Digit Bright Red Digital Led Voltage Display Audible Warning Tone for Reverse Polarity, Voltage Overload, And Low Battery Voltage Capacitance: 3,000,000 Capacitance Tolerance: + / - 10%, Voltage Measurement Accurate To + / - 0.1 VDC Working Voltage: 10-16 VDC, Automatic Shutoff Protection Includes Clear Mounting Brackets Includes the Resistor for Charging Reduce or Stop the Dimming of Your Headlights Accepts any gauge of wire with ring terminals Width of Mounting Bracket Base: 5-1/2" Dimensions: 11-3/4"H X 3-1/2"W X 3-1/2"D 3 Year Warranty Equivalent Series Resistance: You May Also Hook Up as Many as You Like in Parallel to Make A Bank of Power. ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Sold out -51% sale

ABSOLUTE CAP300R Capacitor<br/>3 Farad Red Power Car Capacitor for Energy Storage to Enhance Bass Demand From Audio System

00
DAYS 00
HRS 00
MIN 00
SEC

ABSOLUTE CAP300R Capacitor
3 Farad Red Power Car Capacitor for Energy Storage to Enhance Bass Demand From Audio System $59.99 $119.99

Absolute CAP300R 3 Farad Red Power Car Capacitor for Energy Storage to Enhance Bass Demand From Audio System Car Audio Capacitor is Used to Prevent Dimming of Dash Lights and Headlights When Playing Loud Bass Notes. They Work by Supplying the Car Amplifier with Rapid Jolts of Power. A Car Audio Power Cap Works by Storing Large Amounts of Electrical Power Which It Can Then Deliver to Power Hungry Components When Called Upon to Do So. They Have an Advantage Over Typical Lead Acid Storage Batteries Because They Have Very Low Internal Resistance. This Allows Them to Deliver Large Amounts of Power (Current) Very Quickly. Much Faster Than A Car's Charging System Can Deliver That Same Amount of Current. Car Audio Power Amplifiers Can Have Very Large Current Demands. This Is Dependent on The Music Being Played Through the Amplifier. Typically, These Currents Are Only Needed in Short Bursts During Transient Peaks (Bass Drum Note, Etc.). If the Amplifier Tries to Pull This Current from The Electrical System Directly It May Cause A Drop in Voltage Called A Sag. This Sag Is Equivalent to A Voltage Drop in The System and The Size of The Drop Depends on The Resistance of The Wire from The Source (Battery) to the Amplifier. CHARGING THE CAPACITOR First, make sure that all the connections according to the diagrams in the instruction manual are correct. Pick up the cable coming from the POSITIVE (+) battery terminal. Place the supplied charging resistor between the end of this cable and the positive terminal of the capacitor. The capacitor will begin charging. Charging generally takes 5 to 60 seconds. During charging, the voltage shown in the 3 digit display will rise rapidly, then slow as it approaches the voltage of your vehicle’s battery. When fully charged, the display voltage will stop rising. If you have a voltmeter, you can first measure the voltage of your car battery. Then you will know with accuracy that the capacitor is fully charged. CAUTION!! During charging, the resistor will become hot. This is normal, but exercise caution during the charging process. After charging is complete, remove the resistor from the incoming positive cable, and IMMEDIATELY connect it to the positive terminal of the capacitor. General Features: 3 Farad Digital Capacitor With 3000 Watts Runs On 10-16 Volts DC Audible Warning Tone for Reverse Polarity, Voltage Overload, and Low Battery Voltage Capacitance: 3,000,000, Capacitance Tolerance: + / - 10%, Voltage Measurement Accurate To + / - 0.1 VDC Equivalent Series Resistance: 0.00195 Mw @ 120 Hz / 25°C You May Also Hook Up as Many as You Like in Parallel to Make a Bank of Power Stabilizing Amplifier Flow Capacity High Strength Cylindrical Aluminum Housing Soft Turn-On/Off Power Surge Bright Charging Status L.E.D. Digital Over-Voltage Protection System Perfect for Systems Up to 3000W Max Increases Level of Bass, And the Peak Power of Your Amp Features Audible Warning Indicators Runs On 10-16 Volts Dc Equipped with Automatic Shutoff Protection Accepts Any Gauge of Wire with Ring Terminals 3 Farad Digital Power Capacitor 24 Volts Surge Ultra-Low ESR (Super Low Internal Resistance ) 3 Digit Bright Red Digital Led Voltage Display Audible Warning Tone for Reverse Polarity, Voltage Overload, And Low Battery Voltage Capacitance: 3,000,000 Capacitance Tolerance: + / - 10%, Voltage Measurement Accurate To + / - 0.1 VDC Working Voltage: 10-16 VDC, Automatic Shutoff Protection Includes Clear Mounting Brackets Includes the Resistor for Charging Reduce or Stop the Dimming of Your Headlights Accepts any gauge of wire with ring terminals Width of Mounting Bracket Base: 5-1/2" Dimensions: 11-3/4"H X 3-1/2"W X 3-1/2"D 3 Year Warranty Equivalent Series Resistance: You May Also Hook Up as Many as You Like in Parallel to Make A Bank of Power. ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Sold out -51% sale

00
DAYS 00
HRS 00
MIN 00
SEC

ABSOLUTE CAP300S 3 FARAD POWER CAR CAPACITOR FOR ENERGY STORAGE TO ENHANCE BASS $59.99 $119.99

Absolute CAP300S 3 Farad Silver Power Car Capacitor for Energy Storage to Enhance Bass Demand From Audio System Car Audio Capacitor is Used to Prevent Dimming of Dash Lights and Headlights When Playing Loud Bass Notes. They Work by Supplying the Car Amplifier with Rapid Jolts of Power. A Car Audio Power Cap Works by Storing Large Amounts of Electrical Power Which It Can Then Deliver to Power Hungry Components When Called Upon to Do So. They Have an Advantage Over Typical Lead Acid Storage Batteries Because They Have Very Low Internal Resistance. This Allows Them to Deliver Large Amounts of Power (Current) Very Quickly. Much Faster Than A Car's Charging System Can Deliver That Same Amount of Current. Car Audio Power Amplifiers Can Have Very Large Current Demands. This Is Dependent on The Music Being Played Through the Amplifier. Typically, These Currents Are Only Needed in Short Bursts During Transient Peaks (Bass Drum Note, Etc.). If the Amplifier Tries to Pull This Current from The Electrical System Directly It May Cause A Drop in Voltage Called A Sag. This Sag Is Equivalent to A Voltage Drop in The System and The Size of The Drop Depends on The Resistance of The Wire from The Source (Battery) to the Amplifier. CHARGING THE CAPACITOR First, make sure that all the connections according to the diagrams in the instruction manual are correct. Pick up the cable coming from the POSITIVE (+) battery terminal. Place the supplied charging resistor between the end of this cable and the positive terminal of the capacitor. The capacitor will begin charging. Charging generally takes 5 to 60 seconds. During charging, the voltage shown in the 3 digit display will rise rapidly, then slow as it approaches the voltage of your vehicle’s battery. When fully charged, the display voltage will stop rising. If you have a voltmeter, you can first measure the voltage of your car battery. Then you will know with accuracy that the capacitor is fully charged. CAUTION!! During charging, the resistor will become hot. This is normal, but exercise caution during the charging process. After charging is complete, remove the resistor from the incoming positive cable, and IMMEDIATELY connect it to the positive terminal of the capacitor. General Features: 3 Farad Digital Capacitor With 3000 Watts Runs On 10-16 Volts DC Audible Warning Tone for Reverse Polarity, Voltage Overload, and Low Battery Voltage Capacitance: 3,000,000, Capacitance Tolerance: + / - 10%, Voltage Measurement Accurate To + / - 0.1 VDC Equivalent Series Resistance: 0.00195 Mw @ 120 Hz / 25°C You May Also Hook Up as Many as You Like in Parallel to Make a Bank of Power Stabilizing Amplifier Flow Capacity High Strength Cylindrical Aluminum Housing Soft Turn-On/Off Power Surge Bright Charging Status L.E.D. Digital Over-Voltage Protection System Perfect for Systems Up to 3000W Max Increases Level of Bass, And the Peak Power of Your Amp Features Audible Warning Indicators Runs On 10-16 Volts Dc Equipped with Automatic Shutoff Protection Accepts Any Gauge of Wire with Ring Terminals 3 Farad Digital Power Capacitor 24 Volts Surge Ultra-Low ESR (Super Low Internal Resistance ) 3 Digit Bright Red Digital Led Voltage Display Audible Warning Tone for Reverse Polarity, Voltage Overload, And Low Battery Voltage Capacitance: 3,000,000 Capacitance Tolerance: + / - 10%, Voltage Measurement Accurate To + / - 0.1 VDC Working Voltage: 10-16 VDC, Automatic Shutoff Protection Includes Clear Mounting Brackets Includes the Resistor for Charging Reduce or Stop the Dimming of Your Headlights Accepts any gauge of wire with ring terminals Width of Mounting Bracket Base: 5-1/2" Dimensions: 11-3/4"H X 3-1/2"W X 3-1/2"D 3 Year Warranty Equivalent Series Resistance: You May Also Hook Up as Many as You Like in Parallel to Make A Bank of Power. ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Sold out -51% sale

00
DAYS 00
HRS 00
MIN 00
SEC

ABSOLUTE CAP350B 3.5 FARAD POWER CAR CAPACITOR (BLUE) $59.99 $119.99

Absolute CAP350B 3.5 Farad Blue Power Car Capacitor for Energy Storage to Enhance Bass Demand From Audio System Car Audio Capacitor is Used to Prevent Dimming of Dash Lights and Headlights When Playing Loud Bass Notes. They Work by Supplying the Car Amplifier with Rapid Jolts of Power. A Car Audio Power Cap Works by Storing Large Amounts of Electrical Power Which It Can Then Deliver to Power Hungry Components When Called Upon to Do So. They Have an Advantage Over Typical Lead Acid Storage Batteries Because They Have Very Low Internal Resistance. This Allows Them to Deliver Large Amounts of Power (Current) Very Quickly. Much Faster Than A Car's Charging System Can Deliver That Same Amount of Current. Car Audio Power Amplifiers Can Have Very Large Current Demands. This Is Dependent on The Music Being Played Through the Amplifier. Typically, These Currents Are Only Needed in Short Bursts During Transient Peaks (Bass Drum Note, Etc.). If the Amplifier Tries to Pull This Current from The Electrical System Directly It May Cause A Drop in Voltage Called A Sag. This Sag Is Equivalent to A Voltage Drop in The System and The Size of The Drop Depends on The Resistance of The Wire from The Source (Battery) to the Amplifier. CHARGING THE CAPACITOR First, make sure that all the connections according to the diagrams in the instruction manual are correct. Pick up the cable coming from the POSITIVE (+) battery terminal. Place the supplied charging resistor between the end of this cable and the positive terminal of the capacitor. The capacitor will begin charging. Charging generally takes 5 to 60 seconds. During charging, the voltage shown in the 3 digit display will rise rapidly, then slow as it approaches the voltage of your vehicle’s battery. When fully charged, the display voltage will stop rising. If you have a voltmeter, you can first measure the voltage of your car battery. Then you will know with accuracy that the capacitor is fully charged. CAUTION!! During charging, the resistor will become hot. This is normal, but exercise caution during the charging process. After charging is complete, remove the resistor from the incoming positive cable, and IMMEDIATELY connect it to the positive terminal of the capacitor. General Features: 3.5 Farad Digital Capacitor With 3000 Watts Runs On 10-16 Volts DC Audible Warning Tone for Reverse Polarity, Voltage Overload, and Low Battery Voltage Capacitance: 3,500,000, Capacitance Tolerance: + / - 10%, Voltage Measurement Accurate To + / - 0.1 VDC Equivalent Series Resistance: 0.00195 Mw @ 120 Hz / 25°C You May Also Hook Up as Many as You Like in Parallel to Make a Bank of Power Stabilizing Amplifier Flow Capacity High Strength Cylindrical Aluminum Housing Soft Turn-On/Off Power Surge Bright Charging Status L.E.D. Digital Over-Voltage Protection System Perfect for Systems Up to 3000W Max Increases Level of Bass, And the Peak Power of Your Amp Features Audible Warning Indicators Runs On 10-16 Volts Dc Equipped with Automatic Shutoff Protection Accepts Any Gauge of Wire with Ring Terminals 3.5 Farad Digital Power Capacitor 24 Volts Surge Ultra-Low ESR (Super Low Internal Resistance ) 3 Digit Bright Red Digital Led Voltage Display Audible Warning Tone for Reverse Polarity, Voltage Overload, And Low Battery Voltage Capacitance: 3,500,000 Capacitance Tolerance: + / - 10%, Voltage Measurement Accurate To + / - 0.1 VDC Working Voltage: 10-16 VDC, Automatic Shutoff Protection Includes Clear Mounting Brackets Includes the Resistor for Charging Reduce or Stop the Dimming of Your Headlights Accepts any gauge of wire with ring terminals Width of Mounting Bracket Base: 5-1/2" Dimensions: 11-3/4"H X 3-1/2"W X 3-1/2"D 3 Year Warranty Equivalent Series Resistance: You May Also Hook Up as Many as You Like in Parallel to Make A Bank of Power. ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Sold out -51% sale

00
DAYS 00
HRS 00
MIN 00
SEC

ABSOLUTE CAP350B 3.5 FARAD POWER CAR CAPACITOR FOR ENERGY STORAGE TO ENHANCE BASS DEMAND FROM AUDIO SYSTEM (BLUE) $59.99 $119.99

Absolute CAP350B 3.5 Farad Blue Power Car Capacitor for Energy Storage to Enhance Bass Demand From Audio System Car Audio Capacitor is Used to Prevent Dimming of Dash Lights and Headlights When Playing Loud Bass Notes. They Work by Supplying the Car Amplifier with Rapid Jolts of Power. A Car Audio Power Cap Works by Storing Large Amounts of Electrical Power Which It Can Then Deliver to Power Hungry Components When Called Upon to Do So. They Have an Advantage Over Typical Lead Acid Storage Batteries Because They Have Very Low Internal Resistance. This Allows Them to Deliver Large Amounts of Power (Current) Very Quickly. Much Faster Than A Car's Charging System Can Deliver That Same Amount of Current. Car Audio Power Amplifiers Can Have Very Large Current Demands. This Is Dependent on The Music Being Played Through the Amplifier. Typically, These Currents Are Only Needed in Short Bursts During Transient Peaks (Bass Drum Note, Etc.). If the Amplifier Tries to Pull This Current from The Electrical System Directly It May Cause A Drop in Voltage Called A Sag. This Sag Is Equivalent to A Voltage Drop in The System and The Size of The Drop Depends on The Resistance of The Wire from The Source (Battery) to the Amplifier. CHARGING THE CAPACITOR First, make sure that all the connections according to the diagrams in the instruction manual are correct. Pick up the cable coming from the POSITIVE (+) battery terminal. Place the supplied charging resistor between the end of this cable and the positive terminal of the capacitor. The capacitor will begin charging. Charging generally takes 5 to 60 seconds. During charging, the voltage shown in the 3 digit display will rise rapidly, then slow as it approaches the voltage of your vehicle’s battery. When fully charged, the display voltage will stop rising. If you have a voltmeter, you can first measure the voltage of your car battery. Then you will know with accuracy that the capacitor is fully charged. CAUTION!! During charging, the resistor will become hot. This is normal, but exercise caution during the charging process. After charging is complete, remove the resistor from the incoming positive cable, and IMMEDIATELY connect it to the positive terminal of the capacitor. General Features: 3.5 Farad Digital Capacitor With 3000 Watts Runs On 10-16 Volts DC Audible Warning Tone for Reverse Polarity, Voltage Overload, and Low Battery Voltage Capacitance: 3,500,000, Capacitance Tolerance: + / - 10%, Voltage Measurement Accurate To + / - 0.1 VDC Equivalent Series Resistance: 0.00195 Mw @ 120 Hz / 25°C You May Also Hook Up as Many as You Like in Parallel to Make a Bank of Power Stabilizing Amplifier Flow Capacity High Strength Cylindrical Aluminum Housing Soft Turn-On/Off Power Surge Bright Charging Status L.E.D. Digital Over-Voltage Protection System Perfect for Systems Up to 3000W Max Increases Level of Bass, And the Peak Power of Your Amp Features Audible Warning Indicators Runs On 10-16 Volts Dc Equipped with Automatic Shutoff Protection Accepts Any Gauge of Wire with Ring Terminals 3.5 Farad Digital Power Capacitor 24 Volts Surge Ultra-Low ESR (Super Low Internal Resistance ) 3 Digit Bright Red Digital Led Voltage Display Audible Warning Tone for Reverse Polarity, Voltage Overload, And Low Battery Voltage Capacitance: 3,500,000 Capacitance Tolerance: + / - 10%, Voltage Measurement Accurate To + / - 0.1 VDC Working Voltage: 10-16 VDC, Automatic Shutoff Protection Includes Clear Mounting Brackets Includes the Resistor for Charging Reduce or Stop the Dimming of Your Headlights Accepts any gauge of wire with ring terminals Width of Mounting Bracket Base: 5-1/2" Dimensions: 11-3/4"H X 3-1/2"W X 3-1/2"D 3 Year Warranty Equivalent Series Resistance: You May Also Hook Up as Many as You Like in Parallel to Make A Bank of Power. ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Find anything you need

Products (13253)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER