Products – Page 134 – absoluteusa

2 Peavey PVXp 10 10" Bluetooth Powered Loudspeaker + XLR Cable $999.98 $1,999.99

2 Peavey PVXP10 DSP 10-inch Powered Speaker 520W 10" Powered Speaker with 1" Compression Driver+ MR DJ USA 6 Feet XLR Cable Peavey PVXp 10-inch 520-watt Powered Speaker with 1" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP The Peavey PVXp 10 is a Bluetooth-powered 10-inch loudspeaker. The PVXp 10 Bluetooth features a reliable bi-amped power section that provides 520 Watts of peak dynamic power with DSP-based compression and limiting. This enclosure features a 10" heavy-duty woofer with a 2 3/8-inch voice coil and 50-ounce magnet, and the RX10 compression driver with a 1-inch titanium diaphragm on a 100-degree horizontal x 60-degree vertical pattern asymmetrical horn. The PVXp 10 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4" inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator that can be set to light when power is on and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector, featuring full-coverage, heavy-duty perforated steel grilles with a powder-coat finish. DSP I/O is 48 kHz and 24 bits; internal processing is 56-bit double-precision: Peavey's Quadratic Throat Waveguide technology, 100 by 60-degree coverage. The asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads. Analog input is available via a combination of a female XLR and a 1/4" TRS phone jack with balanced input. There are three channels in total: two for analog and one for Bluetooth or AUX input via a 1/8" jack. Each channel features a level control and a 3-band EQ section, allowing you to adjust and shape the input signals. General Features: Two-way bi-amped sound reinforcement enclosure RX™10 compression driver, with 1-inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 520W peak dynamic power DSP control for precise crossover, EQ, and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure The extra angled section on the right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top and bottom flying point inserts 10" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles with powder-coat finish DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 60-degree coverage Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 34.18 lb (15.5 kg) Packed Length: 22.441" (57 cm) Packed Width: 15.945" (40.5 cm) Packed Height: 14.37" (36.5 cm) Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-23% sale

00
DAYS 00
HRS 00
MIN 00
SEC

2 Peavey PVXP15 DSP 15" 980W Powered Speaker 1.4" Driver+ Speaker Stand+ XLR Cable $1,549.99 $2,000.00

2 Peavey PVXP15 DSP 15 inch Powered Speaker 980W 15" Powered Speaker with 1.4" Compression Driver + MR DJ USA XLR6 6' XLR Cable & SS350 Speaker Stand Peavey PVXp 15-inch 980-watt Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP The PVXp 15 Bluetooth features a reliable bi-amped power section that provides 980 Watts peak dynamic power with DSP-based compression and limiting. This enclosure features a 15" heavy-duty woofer with a 2 3/8 inch voice coil and 50-ounce magnet and the speaker RX14 compression driver with a 1.4-inch titanium diaphragm on a 100-degree horizontal x 50-degree vertical pattern asymmetrical horn. The PVXp 15 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4 inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator can be lit when power is on and the "soft-limiting" DDT circuit is activated or turned off. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector. General Features: 15" heavy-duty woofer delivers chest-thumping low-end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth, high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 15 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts The extra angled section on the right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 15" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 49Hz-20kHz Frequency Response: 58Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 28.25" Width: 18.9" Depth: 18.7" Weight: 51 lbs. Manufacturer Part Number: 03616470 Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-47% sale

00
DAYS 00
HRS 00
MIN 00
SEC

2 Peavey RX14 Professional 1.4" High Frequency Horn Drivers $139.98 $259.99

2 Peavey RX14 Professional 1.4" Professional High Frequency Horn Drivers Features: Peavey RX14 1.4" High Frequency Drivers. Throat Parameter: .938" / 23.8 mm. Nominal Impedance: 8 Ohms. Minimum Impedance: 7.1 Ohms. DC Resistance: 6.8 Ohms Power Capacity 1000 Hz to 20,000 Hz: 120 W peak60 W program30 W continuous. Sensitivity: 104 dB SPL 1 Watt at 1 meter On-axis on 90 H x 45 V horn Nominal Efficiency: 30%. Frequency Response: 1.5 kHz to 20 kHz. Recommended Crossover: 1,800 Hz at 12 dB / Octave. Lowest Recommended Crossover: 2,000 Hz at 12 dB / Octave Diaphragm: Commercially pure titanium. Voice Coil Diameter: 1.4" / 34.4 mm. Voice Coil Material: Edge-wound ribbon with high-temperature Kapton bobbin. Flux Density: 11,500 gauss (1.15T) Dimensions: 3.54" (90 mm) diameter 2.40" (61 mm) depth. Horn Coupling Diameter: .938" (23.8 mm). Horn Coupling Threads: Standard 1 3/8" / 18". Net Weight: 33.6 oz. Details: Save with this bundle Peavey 03495480 RX14 - 1 High-Frequency Compression Driver (Set of 2). The RX14 1" compression driver is known for excellent driver performance, reliability, and power handling. The voice coil is a copper-clad aluminum wire wound on a Kapton high-temperature coil former. The one-piece titanium diaphragm reduces the amount of moving mass, extending the driver's high-frequency response. Ferrofluid cooling is used for improved reliability and smoother frequency response. Package Dimensions: 4.2 x 4.2 x 3.2 inches Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-43% sale

2 Peavey RX22N High Frequency Compression Driver RX22HF RX22

00
DAYS 00
HRS 00
MIN 00
SEC

2 Peavey RX22N High Frequency Compression Driver RX22HF RX22 $399.98 $700.00

2 Peavey RX22N High-Frequency Compression Horn Driver RX22HF RX22This is a direct replacement from Peavey. Let us know if you want more pictures or information about this item. We deal directly with Peavey, so let us know if you need more parts for your Peavey equipment. We carry Crossovers, full speakers, and all accessories!General Features: 2" edge wound voice coil with ferrofluid cooling improves power handling Screw on 1-3/8" 18 TPI mount is compatible with most popular horns Throat Parameter: .875" / 22 mm Nominal Impedance: 8 Ohms Minimum Impedance: 5.1 Ohms DC Resistance: 4.7 Ohms Power Capacity 1000 Hz to 20,000 Hz: 280 W peak 140 W program 70 W continuous using pink noise band-limited from 1000 Hz to 20 kHz(AES 2-1984) Power Capacity 500 Hz to 20,000 Hz: 240 W peak 120 W program 60 W continuous using pink noise band-limited from 500 Hz to 20 kHz Sensitivity: 111 dB / 1 Watt at 1 meter On-axis on 90º H x 45º V horn Nominal Efficiency: 30% Frequency Response: 500 Hz to 20,000 Hz Recommended Crossover: 1200 Hz at 12 dB / Octave Lowest Recommended Crossover: 500 Hz at 12 dB / Octave Diaphragm: Commercially pure titanium Voice Coil Diameter: 2.0" / 50.8 mm Voice Coil Material: Edge-wound copper-clad aluminum ribbon with a temp composite bobbin Flux Density: 17,500 gausses (1.75T) Dimensions: 5.250" (133.3 mm) diameter x 3.05" (77.4 mm) depth Horn Coupling Diameter: 7/8: (22.2 mm) Horn Coupling Threads: Standard 1 3/8" / 18" Net Weight: 5 lbs. 6 oz. Shipping Weight: 6 lbs. 5.5 oz. Voice Coil Cooling: Ferrofluid Weight Unpacked: 5.50 lb(2.493 kg) Weight Packed: 6.48 lb(2.938 kg) Width Packed: 8.25"(20.955 cm) Height Packed: 8.25"(20.955 cm) Depth Packed: 4.75"(12.065 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -51% sale

00
DAYS 00
HRS 00
MIN 00
SEC

2 Pieces 15" Inch Grill Waffle Speaker Subwoofer with Clips and Screw $24.99 $49.99

2 Absolute 15" Subwoofer speaker Metal Mesh Cover Waffle Grille Protect Guard DJ Car Audio This is the best way to protect your subs. This is for Two 15-inch subwoofer grills with hardware (8 brackets w screws)—heavy-duty grill. Do not Flex back and forth when pushed by hand like the cheaper ones. Standard waffle design. Great for Subs, woofers, and loudspeakers in cars & DJ PA speakers. Protect and secure them while showing them off with this classic low-profile waffle-designed grill. This heavy-duty metal grill will prevent damage from push-ins, rips, tears, and accidental kick-ins. It is easily installed and will not flex back and forth when pushed by hand like the cheaper ones. General Features: 15" Diameter Installation Hardware Included: 4 Screws & 4 Mounting Brackets Subwoofer Metal Mesh Waffle Speaker Grille Designed to fit 15" diameter woofers Exact 15" diameter woofers Protect your Subwoofer from cuts, rips, tears, and dents Comes with 4 Mounting Clips Metal edges are De-Burred and plastic-coated Rubber trim ring and mounting clips included Keep your subwoofer looking fabulous while keeping it safe Heavy-Duty Lightweight Steel Construction Cushioned Black Rubber Surround Two -15 Inch Grill & Installation Hardware Waffle Design Universal Fitment For The Protection of Subwoofers 15" Fits Woofers and Speakers with an Overall Diameter of 15" Protects Speaker Cones from Accidental Damage Provides an Attractive Look for Speaker Cabinets Mounts on Top of Speakers with Grill Mounting Clamps Included: (8) Molded ABS Mounting Clamps and Steel Screws Secure Fastening Truss Head Self-Tapping Screws Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -27% sale

00
DAYS 00
HRS 00
MIN 00
SEC

2 Pioneer TS-A1681F 350W MAX 6.5" 4-WAY CAR AUDIO COAXIAL SPEAKERS $219.98 $300.00

2 Pair Pioneer TS-A1681F 350W Max (80W RMS) A-Series 6.5" 4-Way Coaxial Speakers. Pioneer’s A-series sound design matches the subwoofer and full-range loudspeakers, providing seamless and smooth sound characteristics with dynamic, high-impact bass that lets you hear and feel the music. Pioneer’s A-series speakers deliver deep bass and low distortion thanks to carbon and mica-reinforced IMPP cone, a magnetic circuit, and a long symmetrical voice coil. Pioneer's Open & Smooth sound delivers smoother, more expansive sound. The A-series speakers are designed to replace the vehicle’s factory-installed speakers and produce improved sound quality at an exceptional value. Carbon & Mica reinforced IMPP cone for deeper and richer bass response. The Pioneer Open & Smooth sound concept delivers open staging and smooth transition of driver response to provide the ultimate in-car sound. General Features: 6.5" A-Series 4-Way Car Speakers Power Handling: Peak: 350 watts per pair / 125 watts each RMS: 80 watts per pair / 40 watts each Carbon and MICA Reinforced IMPP Woofer Cone Elastic Polymer Surround Material Dual 11mm PET dome tweeters Rubber magnet boot cover CEA-2031 compliant speakers High Heat Resistant Wire Voice Coil 11.2 oz. Ferrite magnet motor structure Grills Included Top-mount Depth: 2 3/8" 4 ohms impedance Frequency Response: 36-25,000 Hz Sensitivity: 88dB What is in the TS-A1681R package: Two 4-way speakers 2 Grilles Two 14" lengths of speaker wire 8 Self-tapping screws 8 Speed clips Warranty sheet Specifications/Instructions/Cutout template on carton TS-A1681R Owner’s Manual Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Sold out -36% sale

00
DAYS 00
HRS 00
MIN 00
SEC

2 Pioneer TS-A4670F 4 x 6" 4-Way 210 Watts Coaxial Car Speaker $89.99 $139.99

Pioneer TS-A4670F 210 Watt A-Series 4" x 6" 4-Way Coaxial Speakers The Pioneer A-Series speaker sound design purposely matches the subwoofer and full-range loudspeakers to provide seamless and smooth sound characteristics with dynamic, high-impact bass that lets you hear and feel the music. Pioneer’s OPEN & SMOOTH sound concept provides a seamless and smooth transition between the midrange and tweeter drivers and delivers uniform off-axis frequency response optimized for automotive applications where one or more speakers are often aimed away from the listeners’ ears. The A-Series lineup expands the flexibility and improves acoustic performance. The integrated inline crossover network allows for increased installation flexibility without the need for an outboard module. Included with the Pioneer A-Series, are multi-fit installation adapters and tweeter mounts (when applicable). General Features : 4" x 6" A-Series 4-Way Car Speakers Peak Power Handling: 210 watts per pair / 105 watts each RMS Power Handling: 30 watts per pair / 15 watts each Carbon and Mica Reinforced IMPP Woofer Elastic Polymer Surround Dual 11mm PET Dome Tweeters Rubber magnet boot cover CEA-2031 compliant speakers High Heat Resistant Wire Voice Coils 4.4oz. TYPE magnet motor structure Top-mount Depth: 2 7/8" Cutout Dimensions: 6.02 x 8.74" 4 ohms impedance Frequency Response: 35 - 42,000 Hz Sensitivity: 89 dB What's in the TS-A4670F package: Two 3-way speakers 2 Plastic metric-to-standard adapter brackets 2 Bottom mount brackets Two 12" lengths of speaker wire Eight M3 x 4mm Machine Screws Eight M3 Nuts 8 Flat washers Warranty information Specs on box TS-A4670F owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Sold out -44% sale

00
DAYS 00
HRS 00
MIN 00
SEC

2 Pioneer TS-A4671F 420W 4x6" A-Series 4-way 4-ohm Coaxial Car Speakers $134.99 $240.00

2 Pioneer TS-A4671F 420W Peak (60W RMS) 4x6" A-Series 4-way 4-ohm Coaxial Car Speakers Pioneer’s next generation of TS-A series speakers offers a Carbon and mica-reinforced IMPP cone. Combined with a new magnetic circuit and long symmetrical voice coil, this makes rich, deep bass and low distortion possible. Newly designed speaker adapters offer various installation options and help ensure well-controlled sound. A design change has also been applied, removing the lead wire connection from the speaker's face, giving it a new, clean look and reducing the risk of shorts and signal noise. General Features: 4" x 6" A Series 4-way Coaxial Car Speakers Peak Power Handling: Peak: 420 watts per pair / 210 watts each RMS Power Handling: 60 watts per pair / 30 watts each Carbon and Mica Reinforced Injection Molded Polypropylene cone material 1-5/8" cellulose fiber cone midrange Rubber-Coated Cloth speaker surround Twin 0.43" Polyethylene Terephthalate (PET) Twin Hard Dome tweeters Copper voice coil with glass imide bobbin 4.4 oz. Ferrite magnet motor structure 'Open & Smooth' sound tech between the midrange and tweeter OE custom-fit installation adapters for US and European vehicle models Iron plate press basket material Top-mount Depth: 1-5/8" Cutout Dimensions: 4 x 6-1/4 Impedance: 4 ohms Frequency Response: 34 - 49000 Hz Sensitivity: 88 dB Weight: ‎2.07 pounds Dimensions: ‎1.65 x 6.02 x 1.65 inches Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -60% sale

00
DAYS 00
HRS 00
MIN 00
SEC

2 Pioneer TS-A6960F 4-Way 450 Watt 6" x 9" Coaxial Car Speakers 6x9 with 16 Gauge 50ft Speaker Wire $129.98 $320.00

2 Pioneer TS-A6960F 6x9" 4-Way 450Watt Coaxial Car Audio Speakers (Pair) with 16 Gauge 50ft Speaker Wire Interchange Part Number: TS-A6967 These Pioneer TS-A6960F 6x9" 4-way car audio speakers are the elite quality speakers you need to take your car's entertainment system to the next level. These speakers feature a carbon and mica-reinforced IMPP cone and a long symmetrical voice coil, which enhances the depth and richness of the bass and minimizes distortion. With an elastic polymer surround, a metal woofer basket, and an injection-molded polypropylene cone, these speakers deliver incredible sound output and give you a durable construction built to last throughout prolonged use. General Features: 6x9" 4-Way Audio Speakers Magnetic Circuit Long Symmetrical Voice Coil Elastic Polymer Surround Y-35 Woofer Magnet Metal Woofer Basket Woofer Magnet Weight: 320g Carbon & Mica Reinforced IMPP Composite Woofer Cone Max Music Power (Nominal): 450W MAX (90W Nom) Frequency Response: 35Hz - 24kHz (-20dB) Sensitivity: 89dB (±1.5dB)(1W/1m) Impedance: 4 Ohms Mounting Depth: 72mm Mounting Depth with Mount Adapter: 62mm Cut Out Dimensions: 153mm x 222mm 450 Watts Max Power (90 Watts Nominal) 18mm Tweeter and 11mm Super Tweeter 2-1/4" cellulose fiber cone midrange 6 x 9" carbon and mica reinforced Injection Molded Polypropylene (IMPP) cone construction Carbon- and Mica-Reinforced IMPP Woofer Elastic Polymer Surround 2 1/4" Cellulose Fiber Cone Midrange Twin PET (Polyethylene Terephthalate) Hard Dome Tweeters 450 Watts Peak Power Cutout Diameter: 6.02" x 8.74" Top-Mount Depth: 2-7/8" Grilles Included Technical Specifications: System: System Type: 4-way Coaxial Sound Pressure Level (Sensitivity): 89 dB (+- 1.5dB) Frequency Range: 35 Hz to 24 kHz Maximum Peak Power Handling: 450 Watts Nominal Impedance: 4 ohms Woofer: Diameter: 6 x 9" Cone Material: Carbon and mica-reinforced IMPP in moonstone gray Surround Material: Elastic polymer Magnet Material: Ferrite Magnet Weight: 11.3 oz Mounting Depth: 2-7/8" Tweeter: Type: Polyethylene terephthalate (PET) dome tweeter (x2) Diameter: 11 mm and 18 mm Crossover Network: Crossover Frequency: 3,600 Hz Package Contents: Pioneer TS-A6960F Owner's manual 2x Pioneer TS-A6960F 450 Watts Speakers Wire Harness Screws Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -51% sale

00
DAYS 00
HRS 00
MIN 00
SEC

2 PIONEER TS-A6960F 450W MAX 6" X 9" 4-WAY 4-OHM STEREO COAXIAL SPEAKER (1PAIR) $79.99 $159.99

Pioneer TS-A6960F 6x9" 4-Way 450Watt Coaxial Car Audio Speakers (Pair) Interchange Part Number: TS-A6967 These Pioneer TS-A6960F 6x9" 4-way car audio speakers are the elite quality speakers you need to take your car's entertainment system to the next level. These speakers feature a carbon and mica-reinforced IMPP cone and a long symmetrical voice coil, which enhances the depth and richness of the bass and minimizes distortion. With an elastic polymer surround, a metal woofer basket, and an injection-molded polypropylene cone, these speakers deliver incredible sound output and give you a durable construction built to last throughout prolonged use. General Features: 6x9" 4-Way Audio Speakers Magnetic Circuit Long Symmetrical Voice Coil Elastic Polymer Surround Y-35 Woofer Magnet Metal Woofer Basket Woofer Magnet Weight: 320g Carbon & Mica Reinforced IMPP Composite Woofer Cone Max Music Power (Nominal): 450W MAX (90W Nom) Frequency Response: 35Hz - 24kHz (-20dB) Sensitivity: 89dB (±1.5dB)(1W/1m) Impedance: 4 Ohms Mounting Depth: 72mm Mounting Depth with Mount Adapter: 62mm Cut Out Dimensions: 153mm x 222mm 450 Watts Max Power (90 Watts Nominal) 18mm Tweeter and 11mm Super Tweeter 2-1/4" cellulose fiber cone midrange 6 x 9" carbon and mica reinforced Injection Molded Polypropylene (IMPP) cone construction Carbon- and Mica-Reinforced IMPP Woofer Elastic Polymer Surround 2 1/4" Cellulose Fiber Cone Midrange Twin PET (Polyethylene Terephthalate) Hard Dome Tweeters 450 Watts Peak Power Cutout Diameter: 6.02" x 8.74" Top-Mount Depth: 2-7/8" Grilles Included Technical Specifications: System: System Type: 4-way Coaxial Sound Pressure Level (Sensitivity): 89 dB (+- 1.5dB) Frequency Range: 35 Hz to 24 kHz Maximum Peak Power Handling: 450 Watts Nominal Impedance: 4 ohms Woofer: Diameter: 6 x 9" Cone Material: Carbon and mica reinforced IMPP in moonstone gray Surround Material: Elastic polymer Magnet Material: Ferrite Magnet Weight: 11.3 oz Mounting Depth: 2-7/8" Tweeter: Type: Polyethylene terephthalate (PET) dome tweeter (x2) Diameter: 11 mm and 18 mm Crossover Network: Crossover Frequency: 3,600 Hz Package Contents: Pioneer TS-A6960F Owner's manual 2x Pioneer TS-A6960F 450 Watts Speakers Wire Harness Screws Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -53% sale

00
DAYS 00
HRS 00
MIN 00
SEC

2 Pioneer TS-A6987S 6" x 9" 5-Way 700W Max 4-Ohms Car Audio Coaxial Speakers $169.99 $359.99

2 Pair Pioneer TS-A6987S 6" x 9" 5-Way 700W Max 4-Ohms Car Audio Coaxial Speakers Upgrade the original sound system of your car. Our A-series lineup can give you the easy-to-install sound upgrade solution you have been looking for. The A-series lineup has carefully selected materials to improve bass response and high frequencies whilst delivering Pioneer's famous Open and smooth sound concept, all in an easy-to-install package. For an even greater experience, please download Pioneer's free CarSoundFit application to hear what your car could sound like before and after it has been upgraded with Pioneer. General Feature: 6 x 9" TS-A Series 5-way System Power Handling: Peak: 700 watts per pair / 350 watts each RMS: 240 watts per pair / 120 watts each Recommended Power Range: 50 - 120 watts RMS per channel Multilayer Mica Matrix Cone Elastic Polymer Surround PI Cone Tweeter Strontium Ferrite Tweeter Magnet Crossover Frequency: 2600 Hz Heat Resistant Voice Coil 4 ohms impedance Ferrite magnet motor structure Top-mount Depth: 3-3/8" Cutout Dimensions: 8-3/4 x 6" Frequency Response: 28 - 38,000 Hz Sensitivity: 93dB ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Sold out -38% sale

00
DAYS 00
HRS 00
MIN 00
SEC

2 Pioneer TS-G1620F 6-1/2" 2-way car speakers & TW-600 Tweeters $99.99 $159.99

Pioneer TS-G1620F 300W 6-1/2" 2-Way G-Series Coaxial Car Speakers + Absolute TW600 Tweeter Our TS-G1620R speakers are excellent choices to replace a bad set of factory 6-1/2" speakers. Their two-way design handles 300 watts max. Power (40 watts nominal) and feature Pioneer’s extremely strong and lightweight Injected Molded Polypropylene™ (IMPP) composite cone woofer for improved sensitivity and reduced distortion.You don't get just basic, run-of-the-mill features either. The conex damper delivers higher power handling and deeper bass, and the 1-3/16” Piezoelectric tweeter reproduces highs with great performance and musicality.These speakers are designed with a shallow mounting depth for easy installation into various vehicles. Speaker grilles are included. General Features: 6-1/2" G-Series Coaxial Car Speakers Power Handling: Peak: 600 watts per pair / 300 watts each RMS: 80 watts per pair / 2-40 watts each Polypropylene with MICA Cone Woofer Rubber Coated Cloth speaker surround 1-3/16" Piezoelectric Tweeter Ferrite magnet motor structure 4 ohms impedance Frequency Response: 31-29,000 Hz Top-mount Depth: 1-11/16" Sensitivity: 89 dB What's in the TS-G1620F package: Two 2-way speakers 2 Metal grilles 2 Plastic grille frames Two 12" Lengths of speaker wire Eight 1" Self-tapping screws 8 Speed clips Warranty information Specifications printed on the box The template is on the box TS-G1645R owner's manual Absolute TW-600 Super Dome Tweeters with 4 Mounting Options General Features: Absolute TW-600 Super Dome Hi-Fi Tweeters 800 Watts max total music power Built-in crossover Super easy installation Perfect for all car audio systems No magnetic field, tapes & credit cards are safe 4 Different mounting options Sensitivity: 100dB Power: 2.8V Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Find anything you need

Products (13678)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER